tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 120 deletions

diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
deleted file mode 100644
index 0ac06a07d25..00000000000
--- a/drivers/serial/samsung.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* linux/drivers/serial/samsung.h
- *
- * Driver for Samsung SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c24xx_uart_info {
-	char			*name;
-	unsigned int		type;
-	unsigned int		fifosize;
-	unsigned long		rx_fifomask;
-	unsigned long		rx_fifoshift;
-	unsigned long		rx_fifofull;
-	unsigned long		tx_fifomask;
-	unsigned long		tx_fifoshift;
-	unsigned long		tx_fifofull;
-
-	/* uart port features */
-
-	unsigned int		has_divslot:1;
-
-	/* clock source control */
-
-	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-	int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
-	/* uart controls */
-	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
-};
-
-struct s3c24xx_uart_port {
-	unsigned char			rx_claimed;
-	unsigned char			tx_claimed;
-	unsigned int			pm_level;
-	unsigned long			baudclk_rate;
-
-	unsigned int			rx_irq;
-	unsigned int			tx_irq;
-
-	struct s3c24xx_uart_info	*info;
-	struct s3c24xx_uart_clksrc	*clksrc;
-	struct clk			*clk;
-	struct clk			*baudclk;
-	struct uart_port		port;
-
-#ifdef CONFIG_CPU_FREQ
-	struct notifier_block		freq_transition;
-#endif
-};
-
-/* conversion functions */
-
-#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
-
-/* register access controls */
-
-#define portaddr(port, reg) ((port)->membase + (reg))
-
-#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
-#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
-
-#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
-#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-
-extern int s3c24xx_serial_probe(struct platform_device *dev,
-				struct s3c24xx_uart_info *uart);
-
-extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
-
-extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info **uart);
-
-extern int s3c24xx_serial_init(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info);
-
-#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
-
-#define s3c24xx_console_init(__drv, __inf)				\
-static int __init s3c_serial_console_init(void)				\
-{									\
-	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
-	int i;								\
-									\
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
-		uinfo[i] = __inf;					\
-	return s3c24xx_serial_initconsole(__drv, uinfo);		\
-}									\
-									\
-console_initcall(s3c_serial_console_init)
-
-#else
-#define s3c24xx_console_init(drv, inf) extern void no_console(void)
-#endif
-
-#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
-
-extern void printascii(const char *);
-
-static void dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-#else
-#define dbg(x...) do { } while (0)
-#endif