summaryrefslogtreecommitdiffstats
path: root/drivers/serial/sh-sci.c
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2005-08-31 10:12:14 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2005-08-31 10:12:14 +0100
commitb129a8ccd53f74c43e4c83c8e0031a4990040830 (patch)
tree4c40afd836be87166d6d014380262f1baa19694f /drivers/serial/sh-sci.c
parent6b39374a27eb4be7e9d82145ae270ba02ea90dc8 (diff)
parent194d0710e1a7fe92dcf860ddd31fded8c3103b7a (diff)
[SERIAL] Clean up and fix tty transmission start/stoping
The start_tx and stop_tx methods were passed a flag to indicate whether the start/stop was from the tty start/stop callbacks, and some drivers used this flag to decide whether to ask the UART to immediately stop transmission (where the UART supports such a feature.) There are other cases when we wish this to occur - when CTS is lowered, or if we change from soft to hard flow control and CTS is inactive. In these cases, this flag was false, and we would allow the transmitter to drain before stopping. There is really only one case where we want to let the transmitter drain before disabling, and that's when we run out of characters to send. Hence, re-jig the start_tx and stop_tx methods to eliminate this flag, and introduce new functions for the special "disable and allow transmitter to drain" case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r--drivers/serial/sh-sci.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index ad5b776d779..51226630786 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -79,8 +79,8 @@ static struct sci_port *serial_console_port = 0;
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
/* Function prototypes */
-static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop);
-static void sci_start_tx(struct uart_port *port, unsigned int tty_start);
+static void sci_stop_tx(struct uart_port *port);
+static void sci_start_tx(struct uart_port *port);
static void sci_start_rx(struct uart_port *port, unsigned int tty_start);
static void sci_stop_rx(struct uart_port *port);
static int sci_request_irq(struct sci_port *port);
@@ -455,7 +455,7 @@ static void sci_transmit_chars(struct uart_port *port)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
- sci_stop_tx(port, 0);
+ sci_stop_tx(port);
} else {
local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
@@ -900,7 +900,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
}
-static void sci_start_tx(struct uart_port *port, unsigned int tty_start)
+static void sci_start_tx(struct uart_port *port)
{
struct sci_port *s = &sci_ports[port->line];
@@ -909,7 +909,7 @@ static void sci_start_tx(struct uart_port *port, unsigned int tty_start)
enable_irq(s->irqs[SCIx_TXI_IRQ]);
}
-static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void sci_stop_tx(struct uart_port *port)
{
unsigned long flags;
unsigned short ctrl;
@@ -978,7 +978,7 @@ static void sci_shutdown(struct uart_port *port)
struct sci_port *s = &sci_ports[port->line];
sci_stop_rx(port);
- sci_stop_tx(port, 1);
+ sci_stop_tx(port);
sci_free_irq(s);
#if defined(__H8300S__)