[SERIAL] Clean up and fix tty transmission start/stoping

The start_tx and stop_tx methods were passed a flag to indicate
whether the start/stop was from the tty start/stop callbacks, and
some drivers used this flag to decide whether to ask the UART to
immediately stop transmission (where the UART supports such a
feature.)

There are other cases when we wish this to occur - when CTS is
lowered, or if we change from soft to hard flow control and CTS
is inactive.  In these cases, this flag was false, and we would
allow the transmitter to drain before stopping.

There is really only one case where we want to let the transmitter
drain before disabling, and that's when we run out of characters
to send.

Hence, re-jig the start_tx and stop_tx methods to eliminate this
flag, and introduce new functions for the special "disable and
allow transmitter to drain" case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
index bb482780a41..9378895a8d5 100644
--- a/drivers/serial/v850e_uart.c
+++ b/drivers/serial/v850e_uart.c
@@ -240,7 +240,7 @@ console_initcall(v850e_uart_console_init);
 
 /* TX/RX interrupt handlers.  */
 
-static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop);
+static void v850e_uart_stop_tx (struct uart_port *port);
 
 void v850e_uart_tx (struct uart_port *port)
 {
@@ -339,14 +339,14 @@ static unsigned v850e_uart_get_mctrl (struct uart_port *port)
 	return mctrl;
 }
 
-static void v850e_uart_start_tx (struct uart_port *port, unsigned tty_start)
+static void v850e_uart_start_tx (struct uart_port *port)
 {
 	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
 	v850e_uart_tx (port);
 	v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
 }
 
-static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop)
+static void v850e_uart_stop_tx (struct uart_port *port)
 {
 	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
 }