Merge branches 'bugzilla-14668' and 'misc-2.6.35' into release

28 files changed, 1896 insertions, 379 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 78ed24bb6a3..30463862603 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -1437,7 +1437,7 @@ int m68328_console_setup(struct console *cp, char *arg)
 	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
 		if (baud_table[i] == n)
 			break;
-	if (i < BAUD_TABLE_SIZE) {
+	if (i < ARRAY_SIZE(baud_table)) {
 		m68328_console_baud = n;
 		m68328_console_cbaud = 0;
 		if (i > 15) {
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 2b1ea3d4c4f..891e1dd65f2 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1891,8 +1891,8 @@ static int serial8250_get_poll_char(struct uart_port *port)
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	unsigned char lsr = serial_inp(up, UART_LSR);
 
-	while (!(lsr & UART_LSR_DR))
-		lsr = serial_inp(up, UART_LSR);
+	if (!(lsr & UART_LSR_DR))
+		return NO_POLL_CHAR;
 
 	return serial_inp(up, UART_RX);
 }
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f55c49475a8..8b23165bc5d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -518,12 +518,13 @@ config SERIAL_S3C2412
 	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
 
 config SERIAL_S3C2440
-	tristate "Samsung S3C2440/S3C2442 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+	tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
 	default y if CPU_S3C2440
 	default y if CPU_S3C2442
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
 	help
-	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
+	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
 
 config SERIAL_S3C24A0
 	tristate "Samsung S3C24A0 Serial port support"
@@ -533,21 +534,13 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
 	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
-	  SoCs
-
-config SERIAL_S5PC100
-	tristate "Samsung S5PC100 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S5PC100
-	select SERIAL_SAMSUNG_UARTS_4
-	default y
-	help
-	  Serial port support for the Samsung S5PC100 SoCs
+	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+	  and S5PC100 SoCs
 
 config SERIAL_S5PV210
 	tristate "Samsung S5PV210 Serial port support"
@@ -1430,8 +1423,8 @@ config SERIAL_SC26XX_CONSOLE
 	  Support for Console on SC2681/SC2692 serial ports.
 
 config SERIAL_BFIN_SPORT
-	tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
-	depends on BLACKFIN && EXPERIMENTAL
+	tristate "Blackfin SPORT emulate UART"
+	depends on BLACKFIN
 	select SERIAL_CORE
 	help
 	  Enable SPORT emulate UART on Blackfin series.
@@ -1446,28 +1439,52 @@ config SERIAL_BFIN_SPORT_CONSOLE
 
 config SERIAL_BFIN_SPORT0_UART
 	bool "Enable UART over SPORT0"
-	depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)
+	depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
 	help
 	  Enable UART over SPORT0
 
+config SERIAL_BFIN_SPORT0_UART_CTSRTS
+	bool "Enable UART over SPORT0 hardware flow control"
+	depends on SERIAL_BFIN_SPORT0_UART
+	help
+	  Enable hardware flow control in the driver.
+
 config SERIAL_BFIN_SPORT1_UART
 	bool "Enable UART over SPORT1"
 	depends on SERIAL_BFIN_SPORT
 	help
 	  Enable UART over SPORT1
 
+config SERIAL_BFIN_SPORT1_UART_CTSRTS
+	bool "Enable UART over SPORT1 hardware flow control"
+	depends on SERIAL_BFIN_SPORT1_UART
+	help
+	  Enable hardware flow control in the driver.
+
 config SERIAL_BFIN_SPORT2_UART
 	bool "Enable UART over SPORT2"
 	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
 	help
 	  Enable UART over SPORT2
 
+config SERIAL_BFIN_SPORT2_UART_CTSRTS
+	bool "Enable UART over SPORT2 hardware flow control"
+	depends on SERIAL_BFIN_SPORT2_UART
+	help
+	  Enable hardware flow control in the driver.
+
 config SERIAL_BFIN_SPORT3_UART
 	bool "Enable UART over SPORT3"
 	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
 	help
 	  Enable UART over SPORT3
 
+config SERIAL_BFIN_SPORT3_UART_CTSRTS
+	bool "Enable UART over SPORT3 hardware flow control"
+	depends on SERIAL_BFIN_SPORT3_UART
+	help
+	  Enable hardware flow control in the driver.
+
 config SERIAL_TIMBERDALE
 	tristate "Support for timberdale UART"
 	select SERIAL_CORE
@@ -1506,4 +1523,56 @@ config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
 	help
 	Support for running a console on the GRLIB APBUART
 
+config SERIAL_ALTERA_JTAGUART
+	tristate "Altera JTAG UART support"
+	select SERIAL_CORE
+	help
+	  This driver supports the Altera JTAG UART port.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE
+	bool "Altera JTAG UART console support"
+	depends on SERIAL_ALTERA_JTAGUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a Altera JTAG UART port to be the system console.
+
+config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
+	bool "Bypass output when no connection"
+	depends on SERIAL_ALTERA_JTAGUART_CONSOLE
+	select SERIAL_CORE_CONSOLE
+	help
+	  Bypass console output and keep going even if there is no
+	  JTAG terminal connection with the host.
+
+config SERIAL_ALTERA_UART
+	tristate "Altera UART support"
+	select SERIAL_CORE
+	help
+	  This driver supports the Altera softcore UART port.
+
+config SERIAL_ALTERA_UART_MAXPORTS
+	int "Maximum number of Altera UART ports"
+	depends on SERIAL_ALTERA_UART
+	default 4
+	help
+	  This setting lets you define the maximum number of the Altera
+	  UART ports. The usual default varies from board to board, and
+	  this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_BAUDRATE
+	int "Default baudrate for Altera UART ports"
+	depends on SERIAL_ALTERA_UART
+	default 115200
+	help
+	  This setting lets you define what the default baudrate is for the
+	  Altera UART ports. The usual default varies from board to board,
+	  and this setting is a way of catering for that.
+
+config SERIAL_ALTERA_UART_CONSOLE
+	bool "Altera UART console support"
+	depends on SERIAL_ALTERA_UART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a Altera UART port to be the system console.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 6aa4723b74e..208a85572c3 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
@@ -83,3 +82,5 @@ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
+obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
+obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c
new file mode 100644
index 00000000000..f9b49b5ff5e
--- /dev/null
+++ b/drivers/serial/altera_jtaguart.c
@@ -0,0 +1,504 @@
+/*
+ * altera_jtaguart.c -- Altera JTAG UART driver
+ *
+ * Based on mcf.c -- Freescale ColdFire UART driver
+ *
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
+ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/altera_jtaguart.h>
+
+#define DRV_NAME "altera_jtaguart"
+
+/*
+ * Altera JTAG UART register definitions according to the Altera JTAG UART
+ * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf
+ */
+
+#define ALTERA_JTAGUART_SIZE			8
+
+#define ALTERA_JTAGUART_DATA_REG		0
+
+#define ALTERA_JTAGUART_DATA_DATA_MSK		0x000000FF
+#define ALTERA_JTAGUART_DATA_RVALID_MSK		0x00008000
+#define ALTERA_JTAGUART_DATA_RAVAIL_MSK		0xFFFF0000
+#define ALTERA_JTAGUART_DATA_RAVAIL_OFF		16
+
+#define ALTERA_JTAGUART_CONTROL_REG		4
+
+#define ALTERA_JTAGUART_CONTROL_RE_MSK		0x00000001
+#define ALTERA_JTAGUART_CONTROL_WE_MSK		0x00000002
+#define ALTERA_JTAGUART_CONTROL_RI_MSK		0x00000100
+#define ALTERA_JTAGUART_CONTROL_RI_OFF		8
+#define ALTERA_JTAGUART_CONTROL_WI_MSK		0x00000200
+#define ALTERA_JTAGUART_CONTROL_AC_MSK		0x00000400
+#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK	0xFFFF0000
+#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF	16
+
+/*
+ * Local per-uart structure.
+ */
+struct altera_jtaguart {
+	struct uart_port port;
+	unsigned int sigs;	/* Local copy of line sigs */
+	unsigned long imr;	/* Local IMR mirror */
+};
+
+static unsigned int altera_jtaguart_tx_empty(struct uart_port *port)
+{
+	return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+		ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+}
+
+static void altera_jtaguart_start_tx(struct uart_port *port)
+{
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+
+	pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK;
+	writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_stop_tx(struct uart_port *port)
+{
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+
+	pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK;
+	writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_stop_rx(struct uart_port *port)
+{
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+
+	pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK;
+	writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static void altera_jtaguart_enable_ms(struct uart_port *port)
+{
+}
+
+static void altera_jtaguart_set_termios(struct uart_port *port,
+					struct ktermios *termios,
+					struct ktermios *old)
+{
+	/* Just copy the old termios settings back */
+	if (old)
+		tty_termios_copy_hw(termios, old);
+}
+
+static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp)
+{
+	struct uart_port *port = &pp->port;
+	unsigned char ch, flag;
+	unsigned long status;
+
+	while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) &
+	       ALTERA_JTAGUART_DATA_RVALID_MSK) {
+		ch = status & ALTERA_JTAGUART_DATA_DATA_MSK;
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+		uart_insert_char(port, 0, 0, ch, flag);
+	}
+
+	tty_flip_buffer_push(port->state->port.tty);
+}
+
+static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp)
+{
+	struct uart_port *port = &pp->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int pending, count;
+
+	if (port->x_char) {
+		/* Send special char - probably flow control */
+		writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG);
+		port->x_char = 0;
+		port->icount.tx++;
+		return;
+	}
+
+	pending = uart_circ_chars_pending(xmit);
+	if (pending > 0) {
+		count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+				ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >>
+			ALTERA_JTAGUART_CONTROL_WSPACE_OFF;
+		if (count > pending)
+			count = pending;
+		if (count > 0) {
+			pending -= count;
+			while (count--) {
+				writel(xmit->buf[xmit->tail],
+				       port->membase + ALTERA_JTAGUART_DATA_REG);
+				xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+				port->icount.tx++;
+			}
+			if (pending < WAKEUP_CHARS)
+				uart_write_wakeup(port);
+		}
+	}
+
+	if (pending == 0) {
+		pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK;
+		writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+	}
+}
+
+static irqreturn_t altera_jtaguart_interrupt(int irq, void *data)
+{
+	struct uart_port *port = data;
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+	unsigned int isr;
+
+	isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >>
+	       ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr;
+
+	spin_lock(&port->lock);
+
+	if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK)
+		altera_jtaguart_rx_chars(pp);
+	if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK)
+		altera_jtaguart_tx_chars(pp);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_RETVAL(isr);
+}
+
+static void altera_jtaguart_config_port(struct uart_port *port, int flags)
+{
+	port->type = PORT_ALTERA_JTAGUART;
+
+	/* Clear mask, so no surprise interrupts. */
+	writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+}
+
+static int altera_jtaguart_startup(struct uart_port *port)
+{
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+	unsigned long flags;
+	int ret;
+
+	ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED,
+			DRV_NAME, port);
+	if (ret) {
+		pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d "
+		       "interrupt vector=%d\n", port->line, port->irq);
+		return ret;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Enable RX interrupts now */
+	pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK;
+	writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void altera_jtaguart_shutdown(struct uart_port *port)
+{
+	struct altera_jtaguart *pp =
+	    container_of(port, struct altera_jtaguart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable all interrupts now */
+	pp->imr = 0;
+	writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	free_irq(port->irq, port);
+}
+
+static const char *altera_jtaguart_type(struct uart_port *port)
+{
+	return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL;
+}
+
+static int altera_jtaguart_request_port(struct uart_port *port)
+{
+	/* UARTs always present */
+	return 0;
+}
+
+static void altera_jtaguart_release_port(struct uart_port *port)
+{
+	/* Nothing to release... */
+}
+
+static int altera_jtaguart_verify_port(struct uart_port *port,
+				       struct serial_struct *ser)
+{
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ *	Define the basic serial functions we support.
+ */
+static struct uart_ops altera_jtaguart_ops = {
+	.tx_empty	= altera_jtaguart_tx_empty,
+	.get_mctrl	= altera_jtaguart_get_mctrl,
+	.set_mctrl	= altera_jtaguart_set_mctrl,
+	.start_tx	= altera_jtaguart_start_tx,
+	.stop_tx	= altera_jtaguart_stop_tx,
+	.stop_rx	= altera_jtaguart_stop_rx,
+	.enable_ms	= altera_jtaguart_enable_ms,
+	.break_ctl	= altera_jtaguart_break_ctl,
+	.startup	= altera_jtaguart_startup,
+	.shutdown	= altera_jtaguart_shutdown,
+	.set_termios	= altera_jtaguart_set_termios,
+	.type		= altera_jtaguart_type,
+	.request_port	= altera_jtaguart_request_port,
+	.release_port	= altera_jtaguart_release_port,
+	.config_port	= altera_jtaguart_config_port,
+	.verify_port	= altera_jtaguart_verify_port,
+};
+
+#define ALTERA_JTAGUART_MAXPORTS 1
+static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
+
+#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
+
+int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
+				       *platp)
+{
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
+		port = &altera_jtaguart_ports[i].port;
+
+		port->line = i;
+		port->type = PORT_ALTERA_JTAGUART;
+		port->mapbase = platp[i].mapbase;
+		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+		port->iotype = SERIAL_IO_MEM;
+		port->irq = platp[i].irq;
+		port->flags = ASYNC_BOOT_AUTOCONF;
+		port->ops = &altera_jtaguart_ops;
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
+static void altera_jtaguart_console_putc(struct console *co, const char c)
+{
+	struct uart_port *port = &(altera_jtaguart_ports + co->index)->port;
+	unsigned long status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) &
+		ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) {
+		if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) {
+			spin_unlock_irqrestore(&port->lock, flags);
+			return;	/* no connection activity */
+		}
+		spin_unlock_irqrestore(&port->lock, flags);
+		cpu_relax();
+		spin_lock_irqsave(&port->lock, flags);
+	}
+	writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+#else
+static void altera_jtaguart_console_putc(struct console *co, const char c)
+{
+	struct uart_port *port = &(altera_jtaguart_ports + co->index)->port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) &
+		ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		cpu_relax();
+		spin_lock_irqsave(&port->lock, flags);
+	}
+	writel(c, port->membase + ALTERA_JTAGUART_DATA_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+#endif
+
+static void altera_jtaguart_console_write(struct console *co, const char *s,
+					  unsigned int count)
+{
+	for (; count; count--, s++) {
+		altera_jtaguart_console_putc(co, *s);
+		if (*s == '\n')
+			altera_jtaguart_console_putc(co, '\r');
+	}
+}
+
+static int __init altera_jtaguart_console_setup(struct console *co,
+						char *options)
+{
+	struct uart_port *port;
+
+	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
+	port = &altera_jtaguart_ports[co->index].port;
+	if (port->membase == 0)
+		return -ENODEV;
+	return 0;
+}
+
+static struct uart_driver altera_jtaguart_driver;
+
+static struct console altera_jtaguart_console = {
+	.name	= "ttyJ",
+	.write	= altera_jtaguart_console_write,
+	.device	= uart_console_device,
+	.setup	= altera_jtaguart_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &altera_jtaguart_driver,
+};
+
+static int __init altera_jtaguart_console_init(void)
+{
+	register_console(&altera_jtaguart_console);
+	return 0;
+}
+
+console_initcall(altera_jtaguart_console_init);
+
+#define	ALTERA_JTAGUART_CONSOLE	(&altera_jtaguart_console)
+
+#else
+
+#define	ALTERA_JTAGUART_CONSOLE	NULL
+
+#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */
+
+static struct uart_driver altera_jtaguart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "altera_jtaguart",
+	.dev_name	= "ttyJ",
+	.major		= ALTERA_JTAGUART_MAJOR,
+	.minor		= ALTERA_JTAGUART_MINOR,
+	.nr		= ALTERA_JTAGUART_MAXPORTS,
+	.cons		= ALTERA_JTAGUART_CONSOLE,
+};
+
+static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
+{
+	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
+		port = &altera_jtaguart_ports[i].port;
+
+		port->line = i;
+		port->type = PORT_ALTERA_JTAGUART;
+		port->mapbase = platp[i].mapbase;
+		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+		port->iotype = SERIAL_IO_MEM;
+		port->irq = platp[i].irq;
+		port->ops = &altera_jtaguart_ops;
+		port->flags = ASYNC_BOOT_AUTOCONF;
+
+		uart_add_one_port(&altera_jtaguart_driver, port);
+	}
+
+	return 0;
+}
+
+static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
+		port = &altera_jtaguart_ports[i].port;
+		if (port)
+			uart_remove_one_port(&altera_jtaguart_driver, port);
+	}
+
+	return 0;
+}
+
+static struct platform_driver altera_jtaguart_platform_driver = {
+	.probe	= altera_jtaguart_probe,
+	.remove	= __devexit_p(altera_jtaguart_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init altera_jtaguart_init(void)
+{
+	int rc;
+
+	rc = uart_register_driver(&altera_jtaguart_driver);
+	if (rc)
+		return rc;
+	rc = platform_driver_register(&altera_jtaguart_platform_driver);
+	if (rc) {
+		uart_unregister_driver(&altera_jtaguart_driver);
+		return rc;
+	}
+	return 0;
+}
+
+static void __exit altera_jtaguart_exit(void)
+{
+	platform_driver_unregister(&altera_jtaguart_platform_driver);
+	uart_unregister_driver(&altera_jtaguart_driver);
+}
+
+module_init(altera_jtaguart_init);
+module_exit(altera_jtaguart_exit);
+
+MODULE_DESCRIPTION("Altera JTAG UART driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
new file mode 100644
index 00000000000..bcee156d2f2
--- /dev/null
+++ b/drivers/serial/altera_uart.c
@@ -0,0 +1,570 @@
+/*
+ * altera_uart.c -- Altera UART driver
+ *
+ * Based on mcf.c -- Freescale ColdFire UART driver
+ *
+ * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
+ * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/altera_uart.h>
+
+#define DRV_NAME "altera_uart"
+
+/*
+ * Altera UART register definitions according to the Nios UART datasheet:
+ * http://www.altera.com/literature/ds/ds_nios_uart.pdf
+ */
+
+#define ALTERA_UART_SIZE		32
+
+#define ALTERA_UART_RXDATA_REG		0
+#define ALTERA_UART_TXDATA_REG		4
+#define ALTERA_UART_STATUS_REG		8
+#define ALTERA_UART_CONTROL_REG		12
+#define ALTERA_UART_DIVISOR_REG		16
+#define ALTERA_UART_EOP_REG		20
+
+#define ALTERA_UART_STATUS_PE_MSK	0x0001	/* parity error */
+#define ALTERA_UART_STATUS_FE_MSK	0x0002	/* framing error */
+#define ALTERA_UART_STATUS_BRK_MSK	0x0004	/* break */
+#define ALTERA_UART_STATUS_ROE_MSK	0x0008	/* RX overrun error */
+#define ALTERA_UART_STATUS_TOE_MSK	0x0010	/* TX overrun error */
+#define ALTERA_UART_STATUS_TMT_MSK	0x0020	/* TX shift register state */
+#define ALTERA_UART_STATUS_TRDY_MSK	0x0040	/* TX ready */
+#define ALTERA_UART_STATUS_RRDY_MSK	0x0080	/* RX ready */
+#define ALTERA_UART_STATUS_E_MSK	0x0100	/* exception condition */
+#define ALTERA_UART_STATUS_DCTS_MSK	0x0400	/* CTS logic-level change */
+#define ALTERA_UART_STATUS_CTS_MSK	0x0800	/* CTS logic state */
+#define ALTERA_UART_STATUS_EOP_MSK	0x1000	/* EOP written/read */
+
+						/* Enable interrupt on... */
+#define ALTERA_UART_CONTROL_PE_MSK	0x0001	/* ...parity error */
+#define ALTERA_UART_CONTROL_FE_MSK	0x0002	/* ...framing error */
+#define ALTERA_UART_CONTROL_BRK_MSK	0x0004	/* ...break */
+#define ALTERA_UART_CONTROL_ROE_MSK	0x0008	/* ...RX overrun */
+#define ALTERA_UART_CONTROL_TOE_MSK	0x0010	/* ...TX overrun */
+#define ALTERA_UART_CONTROL_TMT_MSK	0x0020	/* ...TX shift register empty */
+#define ALTERA_UART_CONTROL_TRDY_MSK	0x0040	/* ...TX ready */
+#define ALTERA_UART_CONTROL_RRDY_MSK	0x0080	/* ...RX ready */
+#define ALTERA_UART_CONTROL_E_MSK	0x0100	/* ...exception*/
+
+#define ALTERA_UART_CONTROL_TRBK_MSK	0x0200	/* TX break */
+#define ALTERA_UART_CONTROL_DCTS_MSK	0x0400	/* Interrupt on CTS change */
+#define ALTERA_UART_CONTROL_RTS_MSK	0x0800	/* RTS signal */
+#define ALTERA_UART_CONTROL_EOP_MSK	0x1000	/* Interrupt on EOP */
+
+/*
+ * Local per-uart structure.
+ */
+struct altera_uart {
+	struct uart_port port;
+	unsigned int sigs;	/* Local copy of line sigs */
+	unsigned short imr;	/* Local IMR mirror */
+};
+
+static unsigned int altera_uart_tx_empty(struct uart_port *port)
+{
+	return (readl(port->membase + ALTERA_UART_STATUS_REG) &
+		ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int altera_uart_get_mctrl(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+	unsigned int sigs;
+
+	spin_lock_irqsave(&port->lock, flags);
+	sigs =
+	    (readl(port->membase + ALTERA_UART_STATUS_REG) &
+	     ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0;
+	sigs |= (pp->sigs & TIOCM_RTS);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return sigs;
+}
+
+static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pp->sigs = sigs;
+	if (sigs & TIOCM_RTS)
+		pp->imr |= ALTERA_UART_CONTROL_RTS_MSK;
+	else
+		pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_start_tx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_stop_tx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_stop_rx(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_break_ctl(struct uart_port *port, int break_state)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (break_state == -1)
+		pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK;
+	else
+		pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_enable_ms(struct uart_port *port)
+{
+}
+
+static void altera_uart_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, baudclk;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+	baudclk = port->uartclk / baud;
+
+	if (old)
+		tty_termios_copy_hw(termios, old);
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+	writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void altera_uart_rx_chars(struct altera_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	unsigned char ch, flag;
+	unsigned short status;
+
+	while ((status = readl(port->membase + ALTERA_UART_STATUS_REG)) &
+	       ALTERA_UART_STATUS_RRDY_MSK) {
+		ch = readl(port->membase + ALTERA_UART_RXDATA_REG);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (status & ALTERA_UART_STATUS_E_MSK) {
+			writel(status, port->membase + ALTERA_UART_STATUS_REG);
+
+			if (status & ALTERA_UART_STATUS_BRK_MSK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (status & ALTERA_UART_STATUS_PE_MSK) {
+				port->icount.parity++;
+			} else if (status & ALTERA_UART_STATUS_ROE_MSK) {
+				port->icount.overrun++;
+			} else if (status & ALTERA_UART_STATUS_FE_MSK) {
+				port->icount.frame++;
+			}
+
+			status &= port->read_status_mask;
+
+			if (status & ALTERA_UART_STATUS_BRK_MSK)
+				flag = TTY_BREAK;
+			else if (status & ALTERA_UART_STATUS_PE_MSK)
+				flag = TTY_PARITY;
+			else if (status & ALTERA_UART_STATUS_FE_MSK)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+		uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch,
+				 flag);
+	}
+
+	tty_flip_buffer_push(port->state->port.tty);
+}
+
+static void altera_uart_tx_chars(struct altera_uart *pp)
+{
+	struct uart_port *port = &pp->port;
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (port->x_char) {
+		/* Send special char - probably flow control */
+		writel(port->x_char, port->membase + ALTERA_UART_TXDATA_REG);
+		port->x_char = 0;
+		port->icount.tx++;
+		return;
+	}
+
+	while (readl(port->membase + ALTERA_UART_STATUS_REG) &
+	       ALTERA_UART_STATUS_TRDY_MSK) {
+		if (xmit->head == xmit->tail)
+			break;
+		writel(xmit->buf[xmit->tail],
+		       port->membase + ALTERA_UART_TXDATA_REG);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (xmit->head == xmit->tail) {
+		pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK;
+		writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+	}
+}
+
+static irqreturn_t altera_uart_interrupt(int irq, void *data)
+{
+	struct uart_port *port = data;
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned int isr;
+
+	isr = readl(port->membase + ALTERA_UART_STATUS_REG) & pp->imr;
+	if (isr & ALTERA_UART_STATUS_RRDY_MSK)
+		altera_uart_rx_chars(pp);
+	if (isr & ALTERA_UART_STATUS_TRDY_MSK)
+		altera_uart_tx_chars(pp);
+	return IRQ_RETVAL(isr);
+}
+
+static void altera_uart_config_port(struct uart_port *port, int flags)
+{
+	port->type = PORT_ALTERA_UART;
+
+	/* Clear mask, so no surprise interrupts. */
+	writel(0, port->membase + ALTERA_UART_CONTROL_REG);
+	/* Clear status register */
+	writel(0, port->membase + ALTERA_UART_STATUS_REG);
+}
+
+static int altera_uart_startup(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+	int ret;
+
+	ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
+			DRV_NAME, port);
+	if (ret) {
+		pr_err(DRV_NAME ": unable to attach Altera UART %d "
+		       "interrupt vector=%d\n", port->line, port->irq);
+		return ret;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Enable RX interrupts now */
+	pp->imr = ALTERA_UART_CONTROL_RRDY_MSK;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void altera_uart_shutdown(struct uart_port *port)
+{
+	struct altera_uart *pp = container_of(port, struct altera_uart, port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Disable all interrupts now */
+	pp->imr = 0;
+	writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	free_irq(port->irq, port);
+}
+
+static const char *altera_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL;
+}
+
+static int altera_uart_request_port(struct uart_port *port)
+{
+	/* UARTs always present */
+	return 0;
+}
+
+static void altera_uart_release_port(struct uart_port *port)
+{
+	/* Nothing to release... */
+}
+
+static int altera_uart_verify_port(struct uart_port *port,
+				   struct serial_struct *ser)
+{
+	if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART))
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ *	Define the basic serial functions we support.
+ */
+static struct uart_ops altera_uart_ops = {
+	.tx_empty	= altera_uart_tx_empty,
+	.get_mctrl	= altera_uart_get_mctrl,
+	.set_mctrl	= altera_uart_set_mctrl,
+	.start_tx	= altera_uart_start_tx,
+	.stop_tx	= altera_uart_stop_tx,
+	.stop_rx	= altera_uart_stop_rx,
+	.enable_ms	= altera_uart_enable_ms,
+	.break_ctl	= altera_uart_break_ctl,
+	.startup	= altera_uart_startup,
+	.shutdown	= altera_uart_shutdown,
+	.set_termios	= altera_uart_set_termios,
+	.type		= altera_uart_type,
+	.request_port	= altera_uart_request_port,
+	.release_port	= altera_uart_release_port,
+	.config_port	= altera_uart_config_port,
+	.verify_port	= altera_uart_verify_port,
+};
+
+static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS];
+
+#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE)
+
+int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
+{
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
+		port = &altera_uart_ports[i].port;
+
+		port->line = i;
+		port->type = PORT_ALTERA_UART;
+		port->mapbase = platp[i].mapbase;
+		port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+		port->iotype = SERIAL_IO_MEM;
+		port->irq = platp[i].irq;
+		port->uartclk = platp[i].uartclk;
+		port->flags = ASYNC_BOOT_AUTOCONF;
+		port->ops = &altera_uart_ops;
+	}
+
+	return 0;
+}
+
+static void altera_uart_console_putc(struct console *co, const char c)
+{
+	struct uart_port *port = &(altera_uart_ports + co->index)->port;
+	int i;
+
+	for (i = 0; i < 0x10000; i++) {
+		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
+		    ALTERA_UART_STATUS_TRDY_MSK)
+			break;
+	}
+	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
+	for (i = 0; i < 0x10000; i++) {
+		if (readl(port->membase + ALTERA_UART_STATUS_REG) &
+		    ALTERA_UART_STATUS_TRDY_MSK)
+			break;
+	}
+}
+
+static void altera_uart_console_write(struct console *co, const char *s,
+				      unsigned int count)
+{
+	for (; count; count--, s++) {
+		altera_uart_console_putc(co, *s);
+		if (*s == '\n')
+			altera_uart_console_putc(co, '\r');
+	}
+}
+
+static int __init altera_uart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS)
+		return -EINVAL;
+	port = &altera_uart_ports[co->index].port;
+	if (port->membase == 0)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver altera_uart_driver;
+
+static struct console altera_uart_console = {
+	.name	= "ttyS",
+	.write	= altera_uart_console_write,
+	.device	= uart_console_device,
+	.setup	= altera_uart_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &altera_uart_driver,
+};
+
+static int __init altera_uart_console_init(void)
+{
+	register_console(&altera_uart_console);
+	return 0;
+}
+
+console_initcall(altera_uart_console_init);
+
+#define	ALTERA_UART_CONSOLE	(&altera_uart_console)
+
+#else
+
+#define	ALTERA_UART_CONSOLE	NULL
+
+#endif /* CONFIG_ALTERA_UART_CONSOLE */
+
+/*
+ *	Define the altera_uart UART driver structure.
+ */
+static struct uart_driver altera_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= DRV_NAME,
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= CONFIG_SERIAL_ALTERA_UART_MAXPORTS,
+	.cons		= ALTERA_UART_CONSOLE,
+};
+
+static int __devinit altera_uart_probe(struct platform_device *pdev)
+{
+	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) {
+		port = &altera_uart_ports[i].port;
+
+		port->line = i;
+		port->type = PORT_ALTERA_UART;
+		port->mapbase = platp[i].mapbase;
+		port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE);
+		port->iotype = SERIAL_IO_MEM;
+		port->irq = platp[i].irq;
+		port->uartclk = platp[i].uartclk;
+		port->ops = &altera_uart_ops;
+		port->flags = ASYNC_BOOT_AUTOCONF;
+
+		uart_add_one_port(&altera_uart_driver, port);
+	}
+
+	return 0;
+}
+
+static int altera_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+	int i;
+
+	for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS; i++) {
+		port = &altera_uart_ports[i].port;
+		if (port)
+			uart_remove_one_port(&altera_uart_driver, port);
+	}
+
+	return 0;
+}
+
+static struct platform_driver altera_uart_platform_driver = {
+	.probe	= altera_uart_probe,
+	.remove	= __devexit_p(altera_uart_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= NULL,
+	},
+};
+
+static int __init altera_uart_init(void)
+{
+	int rc;
+
+	rc = uart_register_driver(&altera_uart_driver);
+	if (rc)
+		return rc;
+	rc = platform_driver_register(&altera_uart_platform_driver);
+	if (rc) {
+		uart_unregister_driver(&altera_uart_driver);
+		return rc;
+	}
+	return 0;
+}
+
+static void __exit altera_uart_exit(void)
+{
+	platform_driver_unregister(&altera_uart_platform_driver);
+	uart_unregister_driver(&altera_uart_driver);
+}
+
+module_init(altera_uart_init);
+module_exit(altera_uart_exit);
+
+MODULE_DESCRIPTION("Altera UART driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 743ebf5f16d..eb4cb480b93 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -342,9 +342,9 @@ static int pl010_get_poll_char(struct uart_port *port)
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int status;
 
-	do {
-		status = readw(uap->port.membase + UART01x_FR);
-	} while (status & UART01x_FR_RXFE);
+	status = readw(uap->port.membase + UART01x_FR);
+	if (status & UART01x_FR_RXFE)
+		return NO_POLL_CHAR;
 
 	return readw(uap->port.membase + UART01x_DR);
 }
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index fe91319b5f6..0099b8692b6 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -559,7 +559,7 @@ static int __devinit apbuart_probe(struct of_device *op,
 
 	i = 0;
 	for (i = 0; i < grlib_apbuart_port_nr; i++) {
-		if (op->node == grlib_apbuart_nodes[i])
+		if (op->dev.of_node == grlib_apbuart_nodes[i])
 			break;
 	}
 
@@ -584,12 +584,12 @@ static struct of_device_id __initdata apbuart_match[] = {
 };
 
 static struct of_platform_driver grlib_apbuart_of_driver = {
-	.match_table = apbuart_match,
 	.probe = apbuart_probe,
 	.driver = {
-		   .owner = THIS_MODULE,
-		   .name = "grlib-apbuart",
-		   },
+		.owner = THIS_MODULE,
+		.name = "grlib-apbuart",
+		.of_match_table = apbuart_match,
+	},
 };
 
 
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 2c9bf9b6832..eed3c2d8dd1 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -38,6 +38,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
+#include <linux/uaccess.h>
 
 #include <asm/io.h>
 
@@ -59,6 +60,9 @@
 
 #include <linux/serial_core.h>
 
+static void atmel_start_rx(struct uart_port *port);
+static void atmel_stop_rx(struct uart_port *port);
+
 #ifdef CONFIG_SERIAL_ATMEL_TTYAT
 
 /* Use device name ttyAT, major 204 and minor 154-169.  This is necessary if we
@@ -93,6 +97,7 @@
 #define UART_GET_BRGR(port)	__raw_readl((port)->membase + ATMEL_US_BRGR)
 #define UART_PUT_BRGR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_BRGR)
 #define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
+#define UART_PUT_TTGR(port, v)	__raw_writel(v, (port)->membase + ATMEL_US_TTGR)
 
  /* PDC registers */
 #define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -147,6 +152,9 @@ struct atmel_uart_port {
 	unsigned int		irq_status_prev;
 
 	struct circ_buf		rx_ring;
+
+	struct serial_rs485	rs485;		/* rs485 settings */
+	unsigned int		tx_done_mask;
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -187,6 +195,46 @@ static bool atmel_use_dma_tx(struct uart_port *port)
 }
 #endif
 
+/* Enable or disable the rs485 support */
+void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	unsigned int mode;
+
+	spin_lock(&port->lock);
+
+	/* Disable interrupts */
+	UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+	mode = UART_GET_MR(port);
+
+	/* Resetting serial mode to RS232 (0x0) */
+	mode &= ~ATMEL_US_USMODE;
+
+	atmel_port->rs485 = *rs485conf;
+
+	if (rs485conf->flags & SER_RS485_ENABLED) {
+		dev_dbg(port->dev, "Setting UART to RS485\n");
+		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+		UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+		mode |= ATMEL_US_USMODE_RS485;
+	} else {
+		dev_dbg(port->dev, "Setting UART to RS232\n");
+		if (atmel_use_dma_tx(port))
+			atmel_port->tx_done_mask = ATMEL_US_ENDTX |
+				ATMEL_US_TXBUFE;
+		else
+			atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+	}
+	UART_PUT_MR(port, mode);
+
+	/* Enable interrupts */
+	UART_PUT_IER(port, atmel_port->tx_done_mask);
+
+	spin_unlock(&port->lock);
+
+}
+
 /*
  * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
  */
@@ -202,6 +250,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 {
 	unsigned int control = 0;
 	unsigned int mode;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	if (cpu_is_at91rm9200()) {
@@ -236,6 +285,17 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 		mode |= ATMEL_US_CHMODE_LOC_LOOP;
 	else
 		mode |= ATMEL_US_CHMODE_NORMAL;
+
+	/* Resetting serial mode to RS232 (0x0) */
+	mode &= ~ATMEL_US_USMODE;
+
+	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+		dev_dbg(port->dev, "Setting UART to RS485\n");
+		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		mode |= ATMEL_US_USMODE_RS485;
+	} else {
+		dev_dbg(port->dev, "Setting UART to RS232\n");
+	}
 	UART_PUT_MR(port, mode);
 }
 
@@ -268,12 +328,17 @@ static u_int atmel_get_mctrl(struct uart_port *port)
  */
 static void atmel_stop_tx(struct uart_port *port)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
 	if (atmel_use_dma_tx(port)) {
 		/* disable PDC transmit */
 		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
-		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-	} else
-		UART_PUT_IDR(port, ATMEL_US_TXRDY);
+	}
+	/* Disable interrupts */
+	UART_PUT_IDR(port, atmel_port->tx_done_mask);
+
+	if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+		atmel_start_rx(port);
 }
 
 /*
@@ -281,17 +346,39 @@ static void atmel_stop_tx(struct uart_port *port)
  */
 static void atmel_start_tx(struct uart_port *port)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
 	if (atmel_use_dma_tx(port)) {
 		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
 			/* The transmitter is already running.  Yes, we
 			   really need this.*/
 			return;
 
-		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+		if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+			atmel_stop_rx(port);
+
 		/* re-enable PDC transmit */
 		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
-	} else
-		UART_PUT_IER(port, ATMEL_US_TXRDY);
+	}
+	/* Enable interrupts */
+	UART_PUT_IER(port, atmel_port->tx_done_mask);
+}
+
+/*
+ * start receiving - port is in process of being opened.
+ */
+static void atmel_start_rx(struct uart_port *port)
+{
+	UART_PUT_CR(port, ATMEL_US_RSTSTA);  /* reset status and receiver */
+
+	if (atmel_use_dma_rx(port)) {
+		/* enable PDC controller */
+		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+			port->read_status_mask);
+		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+	} else {
+		UART_PUT_IER(port, ATMEL_US_RXRDY);
+	}
 }
 
 /*
@@ -302,9 +389,11 @@ static void atmel_stop_rx(struct uart_port *port)
 	if (atmel_use_dma_rx(port)) {
 		/* disable PDC receive */
 		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
-		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-	} else
+		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+			port->read_status_mask);
+	} else {
 		UART_PUT_IDR(port, ATMEL_US_RXRDY);
+	}
 }
 
 /*
@@ -428,8 +517,9 @@ static void atmel_rx_chars(struct uart_port *port)
 static void atmel_tx_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->state->xmit;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+	if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
 		UART_PUT_CHAR(port, port->x_char);
 		port->icount.tx++;
 		port->x_char = 0;
@@ -437,7 +527,7 @@ static void atmel_tx_chars(struct uart_port *port)
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
 
-	while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
+	while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
 		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
@@ -449,7 +539,8 @@ static void atmel_tx_chars(struct uart_port *port)
 		uart_write_wakeup(port);
 
 	if (!uart_circ_empty(xmit))
-		UART_PUT_IER(port, ATMEL_US_TXRDY);
+		/* Enable interrupts */
+		UART_PUT_IER(port, atmel_port->tx_done_mask);
 }
 
 /*
@@ -501,18 +592,10 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_use_dma_tx(port)) {
-		/* PDC transmit */
-		if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
-			UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-			tasklet_schedule(&atmel_port->tasklet);
-		}
-	} else {
-		/* Interrupt transmit */
-		if (pending & ATMEL_US_TXRDY) {
-			UART_PUT_IDR(port, ATMEL_US_TXRDY);
-			tasklet_schedule(&atmel_port->tasklet);
-		}
+	if (pending & atmel_port->tx_done_mask) {
+		/* Either PDC or interrupt transmission */
+		UART_PUT_IDR(port, atmel_port->tx_done_mask);
+		tasklet_schedule(&atmel_port->tasklet);
 	}
 }
 
@@ -590,9 +673,15 @@ static void atmel_tx_dma(struct uart_port *port)
 
 		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
 		UART_PUT_TCR(port, count);
-		/* re-enable PDC transmit and interrupts */
+		/* re-enable PDC transmit */
 		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
-		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+		/* Enable interrupts */
+		UART_PUT_IER(port, atmel_port->tx_done_mask);
+	} else {
+		if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+			/* DMA done, stop TX, start RX for RS485 */
+			atmel_start_rx(port);
+		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1017,6 +1106,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	unsigned long flags;
 	unsigned int mode, imr, quot, baud;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	/* Get current mode register */
 	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
@@ -1115,6 +1205,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* disable receiver and transmitter */
 	UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
 
+	/* Resetting serial mode to RS232 (0x0) */
+	mode &= ~ATMEL_US_USMODE;
+
+	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+		dev_dbg(port->dev, "Setting UART to RS485\n");
+		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		mode |= ATMEL_US_USMODE_RS485;
+	} else {
+		dev_dbg(port->dev, "Setting UART to RS232\n");
+	}
+
 	/* set the parity, stop bits and data size */
 	UART_PUT_MR(port, mode);
 
@@ -1231,6 +1332,35 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
 }
 #endif
 
+static int
+atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
+{
+	struct serial_rs485 rs485conf;
+
+	switch (cmd) {
+	case TIOCSRS485:
+		if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+					sizeof(rs485conf)))
+			return -EFAULT;
+
+		atmel_config_rs485(port, &rs485conf);
+		break;
+
+	case TIOCGRS485:
+		if (copy_to_user((struct serial_rs485 *) arg,
+					&(to_atmel_uart_port(port)->rs485),
+					sizeof(rs485conf)))
+			return -EFAULT;
+		break;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+
+
 static struct uart_ops atmel_pops = {
 	.tx_empty	= atmel_tx_empty,
 	.set_mctrl	= atmel_set_mctrl,
@@ -1250,6 +1380,7 @@ static struct uart_ops atmel_pops = {
 	.config_port	= atmel_config_port,
 	.verify_port	= atmel_verify_port,
 	.pm		= atmel_serial_pm,
+	.ioctl		= atmel_ioctl,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_get_char	= atmel_poll_get_char,
 	.poll_put_char	= atmel_poll_put_char,
@@ -1265,13 +1396,12 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
 	struct uart_port *port = &atmel_port->uart;
 	struct atmel_uart_data *data = pdev->dev.platform_data;
 
-	port->iotype	= UPIO_MEM;
-	port->flags	= UPF_BOOT_AUTOCONF;
-	port->ops	= &atmel_pops;
-	port->fifosize	= 1;
-	port->line	= pdev->id;
-	port->dev	= &pdev->dev;
-
+	port->iotype		= UPIO_MEM;
+	port->flags		= UPF_BOOT_AUTOCONF;
+	port->ops		= &atmel_pops;
+	port->fifosize		= 1;
+	port->line		= pdev->id;
+	port->dev		= &pdev->dev;
 	port->mapbase	= pdev->resource[0].start;
 	port->irq	= pdev->resource[1].start;
 
@@ -1299,8 +1429,16 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
 
 	atmel_port->use_dma_rx = data->use_dma_rx;
 	atmel_port->use_dma_tx = data->use_dma_tx;
-	if (atmel_use_dma_tx(port))
+	atmel_port->rs485	= data->rs485;
+	/* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
+	if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+	else if (atmel_use_dma_tx(port)) {
 		port->fifosize = PDC_BUFFER_SIZE;
+		atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
+	} else {
+		atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+	}
 }
 
 /*
@@ -1334,6 +1472,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch)
 static void atmel_console_write(struct console *co, const char *s, u_int count)
 {
 	struct uart_port *port = &atmel_ports[co->index].uart;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned int status, imr;
 	unsigned int pdc_tx;
 
@@ -1341,7 +1480,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
 	 * First, save IMR and then disable interrupts
 	 */
 	imr = UART_GET_IMR(port);
-	UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+	UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
 
 	/* Store PDC transmit status and disable it */
 	pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index c88f8ad3ff8..e57fb3d228e 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -34,32 +34,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 
+#include <asm/bfin_sport.h>
 #include <asm/delay.h>
 #include <asm/portmux.h>
 
 #include "bfin_sport_uart.h"
 
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-unsigned short bfin_uart_pin_req_sport0[] =
-	{P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \
-	 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-unsigned short bfin_uart_pin_req_sport1[] =
-	{P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-unsigned short bfin_uart_pin_req_sport2[] =
-	{P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \
-	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-unsigned short bfin_uart_pin_req_sport3[] =
-	{P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \
-	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0};
-#endif
-
 struct sport_uart_port {
 	struct uart_port	port;
 	int			err_irq;
@@ -69,9 +49,13 @@ struct sport_uart_port {
 	unsigned short		txmask2;
 	unsigned char		stopb;
 /*	unsigned char		parib; */
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+	int cts_pin;
+	int rts_pin;
+#endif
 };
 
-static void sport_uart_tx_chars(struct sport_uart_port *up);
+static int sport_uart_tx_chars(struct sport_uart_port *up);
 static void sport_stop_tx(struct uart_port *port);
 
 static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
@@ -219,6 +203,59 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+static unsigned int sport_get_mctrl(struct uart_port *port)
+{
+	struct sport_uart_port *up = (struct sport_uart_port *)port;
+	if (up->cts_pin < 0)
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	/* CTS PIN is negative assertive. */
+	if (SPORT_UART_GET_CTS(up))
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	else
+		return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct sport_uart_port *up = (struct sport_uart_port *)port;
+	if (up->rts_pin < 0)
+		return;
+
+	/* RTS PIN is negative assertive. */
+	if (mctrl & TIOCM_RTS)
+		SPORT_UART_ENABLE_RTS(up);
+	else
+		SPORT_UART_DISABLE_RTS(up);
+}
+
+/*
+ * Handle any change of modem status signal.
+ */
+static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id)
+{
+	struct sport_uart_port *up = (struct sport_uart_port *)dev_id;
+	unsigned int status;
+
+	status = sport_get_mctrl(&up->port);
+	uart_handle_cts_change(&up->port, status & TIOCM_CTS);
+
+	return IRQ_HANDLED;
+}
+#else
+static unsigned int sport_get_mctrl(struct uart_port *port)
+{
+	pr_debug("%s enter\n", __func__);
+	return TIOCM_CTS | TIOCM_CD | TIOCM_DSR;
+}
+
+static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	pr_debug("%s enter\n", __func__);
+}
+#endif
+
 /* Reqeust IRQ, Setup clock */
 static int sport_startup(struct uart_port *port)
 {
@@ -247,6 +284,21 @@ static int sport_startup(struct uart_port *port)
 		goto fail2;
 	}
 
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+	if (up->cts_pin >= 0) {
+		if (request_irq(gpio_to_irq(up->cts_pin),
+			sport_mctrl_cts_int,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
+			up->cts_pin = -1;
+			dev_info(port->dev, "Unable to attach BlackFin UART \
+				over SPORT CTS interrupt. So, disable it.\n");
+		}
+	}
+	if (up->rts_pin >= 0)
+		gpio_direction_output(up->rts_pin, 0);
+#endif
+
 	return 0;
  fail2:
 	free_irq(up->port.irq+1, up);
@@ -256,23 +308,35 @@ static int sport_startup(struct uart_port *port)
 	return ret;
 }
 
-static void sport_uart_tx_chars(struct sport_uart_port *up)
+/*
+ * sport_uart_tx_chars
+ *
+ * ret 1 means need to enable sport.
+ * ret 0 means do nothing.
+ */
+static int sport_uart_tx_chars(struct sport_uart_port *up)
 {
 	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (SPORT_GET_STAT(up) & TXF)
-		return;
+		return 0;
 
 	if (up->port.x_char) {
 		tx_one_byte(up, up->port.x_char);
 		up->port.icount.tx++;
 		up->port.x_char = 0;
-		return;
+		return 1;
 	}
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		sport_stop_tx(&up->port);
-		return;
+		/* The waiting loop to stop SPORT TX from TX interrupt is
+		 * too long. This may block SPORT RX interrupts and cause
+		 * RX FIFO overflow. So, do stop sport TX only after the last
+		 * char in TX FIFO is moved into the shift register.
+		 */
+		if (SPORT_GET_STAT(up) & TXHRE)
+			sport_stop_tx(&up->port);
+		return 0;
 	}
 
 	while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
@@ -283,6 +347,8 @@ static void sport_uart_tx_chars(struct sport_uart_port *up)
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&up->port);
+
+	return 1;
 }
 
 static unsigned int sport_tx_empty(struct uart_port *port)
@@ -298,23 +364,15 @@ static unsigned int sport_tx_empty(struct uart_port *port)
 		return 0;
 }
 
-static unsigned int sport_get_mctrl(struct uart_port *port)
-{
-	pr_debug("%s enter\n", __func__);
-	return (TIOCM_CTS | TIOCM_CD | TIOCM_DSR);
-}
-
-static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	pr_debug("%s enter\n", __func__);
-}
-
 static void sport_stop_tx(struct uart_port *port)
 {
 	struct sport_uart_port *up = (struct sport_uart_port *)port;
 
 	pr_debug("%s enter\n", __func__);
 
+	if (!(SPORT_GET_TCR1(up) & TSPEN))
+		return;
+
 	/* Although the hold register is empty, last byte is still in shift
 	 * register and not sent out yet. So, put a dummy data into TX FIFO.
 	 * Then, sport tx stops when last byte is shift out and the dummy
@@ -337,11 +395,12 @@ static void sport_start_tx(struct uart_port *port)
 	pr_debug("%s enter\n", __func__);
 
 	/* Write data into SPORT FIFO before enable SPROT to transmit */
-	sport_uart_tx_chars(up);
+	if (sport_uart_tx_chars(up)) {
+		/* Enable transmit, then an interrupt will generated */
+		SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+		SSYNC();
+	}
 
-	/* Enable transmit, then an interrupt will generated */
-	SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
-	SSYNC();
 	pr_debug("%s exit\n", __func__);
 }
 
@@ -379,6 +438,10 @@ static void sport_shutdown(struct uart_port *port)
 	free_irq(up->port.irq, up);
 	free_irq(up->port.irq+1, up);
 	free_irq(up->err_irq, up);
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+	if (up->cts_pin >= 0)
+		free_irq(gpio_to_irq(up->cts_pin), up);
+#endif
 }
 
 static const char *sport_type(struct uart_port *port)
@@ -448,27 +511,14 @@ static void sport_set_termios(struct uart_port *port,
 		/* up->parib = 1; */
 	}
 
-	port->read_status_mask = OE;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= (FE | PE);
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= BI;
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	port->read_status_mask = 0;
 
 	/*
 	 * Characters to ignore
 	 */
 	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= FE | PE;
-	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= BI;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= OE;
-	}
 
 	/* RX extract mask */
 	up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
@@ -488,8 +538,6 @@ static void sport_set_termios(struct uart_port *port,
 	/* uart baud rate */
 	port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16);
 
-	spin_lock_irqsave(&up->port.lock, flags);
-
 	/* Disable UART */
 	SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN);
 	SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN);
@@ -542,6 +590,8 @@ struct uart_ops sport_uart_ops = {
 static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS];
 
 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
+#define CLASS_BFIN_SPORT_CONSOLE	"bfin-sport-console"
+
 static int __init
 sport_uart_console_setup(struct console *co, char *options)
 {
@@ -549,7 +599,11 @@ sport_uart_console_setup(struct console *co, char *options)
 	int baud = 57600;
 	int bits = 8;
 	int parity = 'n';
+# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+	int flow = 'r';
+# else
 	int flow = 'n';
+# endif
 
 	/* Check whether an invalid uart number has been specified */
 	if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS)
@@ -690,11 +744,11 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 
 	if (bfin_sport_uart_ports[pdev->id] == NULL) {
 		bfin_sport_uart_ports[pdev->id] =
-			kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
+			kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL);
 		sport = bfin_sport_uart_ports[pdev->id];
 		if (!sport) {
 			dev_err(&pdev->dev,
-				"Fail to kmalloc sport_uart_port\n");
+				"Fail to malloc sport_uart_port\n");
 			return -ENOMEM;
 		}
 
@@ -720,13 +774,13 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 			goto out_error_free_peripherals;
 		}
 
-		sport->port.membase = ioremap(res->start,
-			res->end - res->start);
+		sport->port.membase = ioremap(res->start, resource_size(res));
 		if (!sport->port.membase) {
 			dev_err(&pdev->dev, "Cannot map sport IO\n");
 			ret = -ENXIO;
 			goto out_error_free_peripherals;
 		}
+		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
 		if (sport->port.irq < 0) {
@@ -741,6 +795,22 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 			ret = -ENOENT;
 			goto out_error_unmap;
 		}
+#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		if (res == NULL)
+			sport->cts_pin = -1;
+		else
+			sport->cts_pin = res->start;
+
+		res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+		if (res == NULL)
+			sport->rts_pin = -1;
+		else
+			sport->rts_pin = res->start;
+
+		if (sport->rts_pin >= 0)
+			gpio_request(sport->rts_pin, DRV_NAME);
+#endif
 	}
 
 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
@@ -779,6 +849,10 @@ static int __devexit sport_uart_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&sport_uart_reg, &sport->port);
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+		if (sport->rts_pin >= 0)
+			gpio_free(sport->rts_pin);
+#endif
 		iounmap(sport->port.membase);
 		peripheral_free_list(
 			(unsigned short *)pdev->dev.platform_data);
@@ -802,7 +876,7 @@ static struct platform_driver sport_uart_driver = {
 
 #ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE
 static __initdata struct early_platform_driver early_sport_uart_driver = {
-	.class_str = DRV_NAME,
+	.class_str = CLASS_BFIN_SPORT_CONSOLE,
 	.pdrv = &sport_uart_driver,
 	.requested_id = EARLY_PLATFORM_ID_UNSET,
 };
@@ -811,7 +885,8 @@ static int __init sport_uart_rs_console_init(void)
 {
 	early_platform_driver_register(&early_sport_uart_driver, DRV_NAME);
 
-	early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0);
+	early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE,
+		BFIN_SPORT_UART_MAX_PORTS, 0);
 
 	register_console(&sport_uart_console);
 
@@ -824,7 +899,7 @@ static int __init sport_uart_init(void)
 {
 	int ret;
 
-	pr_info("Serial: Blackfin uart over sport driver\n");
+	pr_info("Blackfin uart over sport driver\n");
 
 	ret = uart_register_driver(&sport_uart_reg);
 	if (ret) {
diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index abe03614e4d..9ce253e381d 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -37,7 +37,21 @@
 #define SPORT_GET_TFSDIV(sport)		bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
 #define SPORT_GET_TX(sport)		bfin_read16(((sport)->port.membase + OFFSET_TX))
 #define SPORT_GET_RX(sport)		bfin_read16(((sport)->port.membase + OFFSET_RX))
-#define SPORT_GET_RX32(sport)		bfin_read32(((sport)->port.membase + OFFSET_RX))
+/*
+ * If another interrupt fires while doing a 32-bit read from RX FIFO,
+ * a fake RX underflow error will be generated.  So disable interrupts
+ * to prevent interruption while reading the FIFO.
+ */
+#define SPORT_GET_RX32(sport) \
+({ \
+	unsigned int __ret; \
+	if (ANOMALY_05000473) \
+		local_irq_disable(); \
+	__ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
+	if (ANOMALY_05000473) \
+		local_irq_enable(); \
+	__ret; \
+})
 #define SPORT_GET_RCR1(sport)		bfin_read16(((sport)->port.membase + OFFSET_RCR1))
 #define SPORT_GET_RCR2(sport)		bfin_read16(((sport)->port.membase + OFFSET_RCR2))
 #define SPORT_GET_RCLKDIV(sport)	bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
@@ -58,4 +72,15 @@
 
 #define SPORT_TX_FIFO_SIZE	8
 
+#define SPORT_UART_GET_CTS(x)		gpio_get_value(x->cts_pin)
+#define SPORT_UART_DISABLE_RTS(x)	gpio_set_value(x->rts_pin, 1)
+#define SPORT_UART_ENABLE_RTS(x)	gpio_set_value(x->rts_pin, 0)
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS)
+# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS
+#endif
+
 #endif /* _BFIN_SPORT_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 300cea768d7..9eb62a256e9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1342,7 +1342,7 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
 	/* initialize the device pointer for the port */
 	pinfo->port.dev = &ofdev->dev;
 
-	ret = cpm_uart_init_port(ofdev->node, pinfo);
+	ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo);
 	if (ret)
 		return ret;
 
@@ -1372,8 +1372,11 @@ static struct of_device_id cpm_uart_match[] = {
 };
 
 static struct of_platform_driver cpm_uart_driver = {
-	.name = "cpm_uart",
-	.match_table = cpm_uart_match,
+	.driver = {
+		.name = "cpm_uart",
+		.owner = THIS_MODULE,
+		.of_match_table = cpm_uart_match,
+	},
 	.probe = cpm_uart_probe,
 	.remove = cpm_uart_remove,
  };
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index eadc1ab6bbc..a9a94ae7234 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -14,7 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/kgdb.h>
+#include <linux/kdb.h>
 #include <linux/tty.h>
+#include <linux/console.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -32,6 +34,40 @@ static struct kparam_string kps = {
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
+#ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_register_kbd(char **cptr)
+{
+	if (strncmp(*cptr, "kbd", 3) == 0) {
+		if (kdb_poll_idx < KDB_POLL_FUNC_MAX) {
+			kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char;
+			kdb_poll_idx++;
+			if (cptr[0][3] == ',')
+				*cptr += 4;
+			else
+				return 1;
+		}
+	}
+	return 0;
+}
+
+static void kgdboc_unregister_kbd(void)
+{
+	int i;
+
+	for (i = 0; i < kdb_poll_idx; i++) {
+		if (kdb_poll_funcs[i] == kdb_get_kbd_char) {
+			kdb_poll_idx--;
+			kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx];
+			kdb_poll_funcs[kdb_poll_idx] = NULL;
+			i--;
+		}
+	}
+}
+#else /* ! CONFIG_KDB_KEYBOARD */
+#define kgdboc_register_kbd(x) 0
+#define kgdboc_unregister_kbd()
+#endif /* ! CONFIG_KDB_KEYBOARD */
+
 static int kgdboc_option_setup(char *opt)
 {
 	if (strlen(opt) > MAX_CONFIG_LEN) {
@@ -45,25 +81,51 @@ static int kgdboc_option_setup(char *opt)
 
 __setup("kgdboc=", kgdboc_option_setup);
 
+static void cleanup_kgdboc(void)
+{
+	kgdboc_unregister_kbd();
+	if (configured == 1)
+		kgdb_unregister_io_module(&kgdboc_io_ops);
+}
+
 static int configure_kgdboc(void)
 {
 	struct tty_driver *p;
 	int tty_line = 0;
 	int err;
+	char *cptr = config;
+	struct console *cons;
 
 	err = kgdboc_option_setup(config);
 	if (err || !strlen(config) || isspace(config[0]))
 		goto noconfig;
 
 	err = -ENODEV;
+	kgdboc_io_ops.is_console = 0;
+	kgdb_tty_driver = NULL;
 
-	p = tty_find_polling_driver(config, &tty_line);
+	if (kgdboc_register_kbd(&cptr))
+		goto do_register;
+
+	p = tty_find_polling_driver(cptr, &tty_line);
 	if (!p)
 		goto noconfig;
 
+	cons = console_drivers;
+	while (cons) {
+		int idx;
+		if (cons->device && cons->device(cons, &idx) == p &&
+		    idx == tty_line) {
+			kgdboc_io_ops.is_console = 1;
+			break;
+		}
+		cons = cons->next;
+	}
+
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
+do_register:
 	err = kgdb_register_io_module(&kgdboc_io_ops);
 	if (err)
 		goto noconfig;
@@ -75,6 +137,7 @@ static int configure_kgdboc(void)
 noconfig:
 	config[0] = 0;
 	configured = 0;
+	cleanup_kgdboc();
 
 	return err;
 }
@@ -88,20 +151,18 @@ static int __init init_kgdboc(void)
 	return configure_kgdboc();
 }
 
-static void cleanup_kgdboc(void)
-{
-	if (configured == 1)
-		kgdb_unregister_io_module(&kgdboc_io_ops);
-}
-
 static int kgdboc_get_char(void)
 {
+	if (!kgdb_tty_driver)
+		return -1;
 	return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver,
 						kgdb_tty_line);
 }
 
 static void kgdboc_put_char(u8 chr)
 {
+	if (!kgdb_tty_driver)
+		return;
 	kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver,
 					kgdb_tty_line, chr);
 }
@@ -162,6 +223,25 @@ static struct kgdb_io kgdboc_io_ops = {
 	.post_exception		= kgdboc_post_exp_handler,
 };
 
+#ifdef CONFIG_KGDB_SERIAL_CONSOLE
+/* This is only available if kgdboc is a built in for early debugging */
+int __init kgdboc_early_init(char *opt)
+{
+	/* save the first character of the config string because the
+	 * init routine can destroy it.
+	 */
+	char save_ch;
+
+	kgdboc_option_setup(opt);
+	save_ch = config[0];
+	init_kgdboc();
+	config[0] = save_ch;
+	return 0;
+}
+
+early_param("ekgdboc", kgdboc_early_init);
+#endif /* CONFIG_KGDB_SERIAL_CONSOLE */
+
 module_init(init_kgdboc);
 module_exit(cleanup_kgdboc);
 module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 02469c31bf0..84a35f69901 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -397,34 +397,10 @@ static unsigned long mpc512x_getuartclk(void *p)
 	return mpc5xxx_get_bus_frequency(p);
 }
 
-#define DEFAULT_FIFO_SIZE 16
-
-static unsigned int __init get_fifo_size(struct device_node *np,
-					 char *fifo_name)
-{
-	const unsigned int *fp;
-
-	fp = of_get_property(np, fifo_name, NULL);
-	if (fp)
-		return *fp;
-
-	pr_warning("no %s property in %s node, defaulting to %d\n",
-		   fifo_name, np->full_name, DEFAULT_FIFO_SIZE);
-
-	return DEFAULT_FIFO_SIZE;
-}
-
-#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
-		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
-
 /* Init PSC FIFO Controller */
 static int __init mpc512x_psc_fifoc_init(void)
 {
 	struct device_node *np;
-	void __iomem *psc;
-	unsigned int tx_fifo_size;
-	unsigned int rx_fifo_size;
-	int fifobase = 0; /* current fifo address in 32 bit words */
 
 	np = of_find_compatible_node(NULL, NULL,
 				     "fsl,mpc5121-psc-fifo");
@@ -447,51 +423,6 @@ static int __init mpc512x_psc_fifoc_init(void)
 		return -ENODEV;
 	}
 
-	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") {
-		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
-		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
-
-		/* size in register is in 4 byte units */
-		tx_fifo_size /= 4;
-		rx_fifo_size /= 4;
-		if (!tx_fifo_size)
-			tx_fifo_size = 1;
-		if (!rx_fifo_size)
-			rx_fifo_size = 1;
-
-		psc = of_iomap(np, 0);
-		if (!psc) {
-			pr_err("%s: Can't map %s device\n",
-				__func__, np->full_name);
-			continue;
-		}
-
-		/* FIFO space is 4KiB, check if requested size is available */
-		if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
-			pr_err("%s: no fifo space available for %s\n",
-				__func__, np->full_name);
-			iounmap(psc);
-			/*
-			 * chances are that another device requests less
-			 * fifo space, so we continue.
-			 */
-			continue;
-		}
-		/* set tx and rx fifo size registers */
-		out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
-		fifobase += tx_fifo_size;
-		out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
-		fifobase += rx_fifo_size;
-
-		/* reset and enable the slices */
-		out_be32(&FIFOC(psc)->txcmd, 0x80);
-		out_be32(&FIFOC(psc)->txcmd, 0x01);
-		out_be32(&FIFOC(psc)->rxcmd, 0x80);
-		out_be32(&FIFOC(psc)->rxcmd, 0x01);
-
-		iounmap(psc);
-	}
-
 	return 0;
 }
 
@@ -1295,14 +1226,14 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	/* Check validity & presence */
 	for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
-		if (mpc52xx_uart_nodes[idx] == op->node)
+		if (mpc52xx_uart_nodes[idx] == op->dev.of_node)
 			break;
 	if (idx >= MPC52xx_PSC_MAXNUM)
 		return -EINVAL;
 	pr_debug("Found %s assigned to ttyPSC%x\n",
 		 mpc52xx_uart_nodes[idx]->full_name, idx);
 
-	uartclk = psc_ops->getuartclk(op->node);
+	uartclk = psc_ops->getuartclk(op->dev.of_node);
 	if (uartclk == 0) {
 		dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
 		return -EINVAL;
@@ -1322,7 +1253,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 	port->dev	= &op->dev;
 
 	/* Search for IRQ and mapbase */
-	ret = of_address_to_resource(op->node, 0, &res);
+	ret = of_address_to_resource(op->dev.of_node, 0, &res);
 	if (ret)
 		return ret;
 
@@ -1332,7 +1263,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 		return -EINVAL;
 	}
 
-	psc_ops->get_irq(port, op->node);
+	psc_ops->get_irq(port, op->dev.of_node);
 	if (port->irq == NO_IRQ) {
 		dev_dbg(&op->dev, "Could not get irq\n");
 		return -EINVAL;
@@ -1431,15 +1362,16 @@ mpc52xx_uart_of_enumerate(void)
 MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
 
 static struct of_platform_driver mpc52xx_uart_of_driver = {
-	.match_table	= mpc52xx_uart_of_match,
 	.probe		= mpc52xx_uart_of_probe,
 	.remove		= mpc52xx_uart_of_remove,
 #ifdef CONFIG_PM
 	.suspend	= mpc52xx_uart_of_suspend,
 	.resume		= mpc52xx_uart_of_resume,
 #endif
-	.driver		= {
-		.name	= "mpc52xx-psc-uart",
+	.driver = {
+		.name = "mpc52xx-psc-uart",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_uart_of_match,
 	},
 };
 
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 55e113a0be0..6a9c6605666 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -2071,6 +2071,7 @@ static int mpsc_drv_probe(struct platform_device *dev)
 
 		if (!(rc = mpsc_drv_map_regs(pi, dev))) {
 			mpsc_drv_get_platform_data(pi, dev, dev->id);
+			pi->port.dev = &dev->dev;
 
 			if (!(rc = mpsc_make_ready(pi))) {
 				spin_lock_init(&pi->tx_lock);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index e1ab8ec0a4a..3c02fa96f28 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -344,7 +344,7 @@ int nwpserial_register_port(struct uart_port *port)
 
 	mutex_lock(&nwpserial_mutex);
 
-	dn = to_of_device(port->dev)->node;
+	dn = to_of_device(port->dev)->dev.of_node;
 	if (dn == NULL)
 		goto out;
 
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 4abfebdb0fc..a48d9080f55 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -31,7 +31,7 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev,
 					int type, struct uart_port *port)
 {
 	struct resource resource;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	const unsigned int *clk, *spd;
 	const u32 *prop;
 	int ret, prop_size;
@@ -88,7 +88,7 @@ static int __devinit of_platform_serial_probe(struct of_device *ofdev,
 	int port_type;
 	int ret;
 
-	if (of_find_property(ofdev->node, "used-by-rtas", NULL))
+	if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
 		return -EBUSY;
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -175,11 +175,13 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
 };
 
 static struct of_platform_driver of_platform_serial_driver = {
-	.owner = THIS_MODULE,
-	.name = "of_serial",
+	.driver = {
+		.name = "of_serial",
+		.owner = THIS_MODULE,
+		.of_match_table = of_platform_serial_table,
+	},
 	.probe = of_platform_serial_probe,
 	.remove = of_platform_serial_remove,
-	.match_table = of_platform_serial_table,
 };
 
 static int __init of_platform_serial_init(void)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 700e10833bf..cabbdc7ba58 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1611,7 +1611,7 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	/* Iterate the pmz_ports array to find a matching entry
 	 */
 	for (i = 0; i < MAX_ZS_PORTS; i++)
-		if (pmz_ports[i].node == mdev->ofdev.node) {
+		if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
 			struct uart_pmac_port *uap = &pmz_ports[i];
 
 			uap->dev = mdev;
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 8dc03837617..4a789e5361a 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -119,7 +119,7 @@ static int s5p_serial_probe(struct platform_device *pdev)
 	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
 }
 
-static struct platform_driver s5p_serial_drv = {
+static struct platform_driver s5p_serial_driver = {
 	.probe		= s5p_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -130,19 +130,19 @@ static struct platform_driver s5p_serial_drv = {
 
 static int __init s5pv210_serial_console_init(void)
 {
-	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+	return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
 }
 
 console_initcall(s5pv210_serial_console_init);
 
 static int __init s5p_serial_init(void)
 {
-	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+	return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
 }
 
 static void __exit s5p_serial_exit(void)
 {
-	platform_driver_unregister(&s5p_serial_drv);
+	platform_driver_unregister(&s5p_serial_driver);
 }
 
 module_init(s5p_serial_init);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 8cfa5b12ea7..dadd686c980 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -89,7 +89,6 @@ struct serial_info {
 	int			manfid;
 	int			prodid;
 	int			c950ctrl;
-	dev_node_t		node[4];
 	int			line[4];
 	const struct serial_quirk *quirk;
 };
@@ -289,8 +288,6 @@ static void serial_remove(struct pcmcia_device *link)
 	for (i = 0; i < info->ndev; i++)
 		serial8250_unregister_port(info->line[i]);
 
-	info->p_dev->dev_node = NULL;
-
 	if (!info->slave)
 		pcmcia_disable_device(link);
 }
@@ -343,7 +340,6 @@ static int serial_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -411,11 +407,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 	}
 
 	info->line[info->ndev] = line;
-	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
-	info->node[info->ndev].major = TTY_MAJOR;
-	info->node[info->ndev].minor = 0x40 + line;
-	if (info->ndev > 0)
-		info->node[info->ndev - 1].next = &info->node[info->ndev];
 	info->ndev++;
 
 	return 0;
@@ -486,7 +477,7 @@ static int simple_config(struct pcmcia_device *link)
 		}
 		if (info->slave) {
 			return setup_serial(link, info, port,
-					    link->irq.AssignedIRQ);
+					    link->irq);
 		}
 	}
 
@@ -507,10 +498,6 @@ static int simple_config(struct pcmcia_device *link)
 	return -1;
 
 found_port:
-	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0)
-		link->irq.AssignedIRQ = 0;
-
 	if (info->multi && (info->manfid == MANFID_3COM))
 		link->conf.ConfigIndex &= ~(0x08);
 
@@ -523,7 +510,7 @@ found_port:
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != 0)
 		return -1;
-	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
+	return setup_serial(link, info, link->io.BasePort1, link->irq);
 }
 
 static int multi_config_check(struct pcmcia_device *p_dev,
@@ -586,13 +573,9 @@ static int multi_config(struct pcmcia_device *link)
 		}
 	}
 
-	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		/* FIXME: comment does not fit, error handling does not fit */
-		printk(KERN_NOTICE
-		       "serial_cs: no usable port range found, giving up\n");
-		link->irq.AssignedIRQ = 0;
-	}
+	if (!link->irq)
+		dev_warn(&link->dev,
+			"serial_cs: no usable IRQ found, continuing...\n");
 
 	/*
 	 * Apply any configuration quirks.
@@ -615,11 +598,11 @@ static int multi_config(struct pcmcia_device *link)
 		if (link->conf.ConfigIndex == 1 ||
 		    link->conf.ConfigIndex == 3) {
 			err = setup_serial(link, info, base2,
-					link->irq.AssignedIRQ);
+					link->irq);
 			base2 = link->io.BasePort1;
 		} else {
 			err = setup_serial(link, info, link->io.BasePort1,
-					link->irq.AssignedIRQ);
+					link->irq);
 		}
 		info->c950ctrl = base2;
 
@@ -633,10 +616,10 @@ static int multi_config(struct pcmcia_device *link)
 		return 0;
 	}
 
-	setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
+	setup_serial(link, info, link->io.BasePort1, link->irq);
 	for (i = 0; i < info->multi - 1; i++)
 		setup_serial(link, info, base2 + (8 * i),
-				link->irq.AssignedIRQ);
+				link->irq);
 	return 0;
 }
 
@@ -720,7 +703,6 @@ static int serial_config(struct pcmcia_device * link)
 		if (info->quirk->post(link))
 			goto failed;
 
-	link->dev_node = &info->node[0];
 	return 0;
 
 failed:
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8eb094c1f61..5f90fcd7d10 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -83,16 +83,16 @@ struct sci_port {
 
 	/* Interface clock */
 	struct clk		*iclk;
-	/* Data clock */
-	struct clk		*dclk;
+	/* Function clock */
+	struct clk		*fclk;
 
 	struct list_head	node;
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
 	struct device			*dma_dev;
-	enum sh_dmae_slave_chan_id	slave_tx;
-	enum sh_dmae_slave_chan_id	slave_rx;
+	unsigned int			slave_tx;
+	unsigned int			slave_rx;
 	struct dma_async_tx_descriptor	*desc_tx;
 	struct dma_async_tx_descriptor	*desc_rx[2];
 	dma_cookie_t			cookie_tx;
@@ -107,6 +107,7 @@ struct sci_port {
 	struct work_struct		work_tx;
 	struct work_struct		work_rx;
 	struct timer_list		rx_timer;
+	unsigned int			rx_timeout;
 #endif
 };
 
@@ -150,7 +151,11 @@ static int sci_poll_get_char(struct uart_port *port)
 			handle_error(port);
 			continue;
 		}
-	} while (!(status & SCxSR_RDxF(port)));
+		break;
+	} while (1);
+
+	if (!(status & SCxSR_RDxF(port)))
+		return NO_POLL_CHAR;
 
 	c = sci_in(port, SCxRDR);
 
@@ -674,22 +679,22 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 	struct sci_port *s = to_sci_port(port);
 
 	if (s->chan_rx) {
-		unsigned long tout;
 		u16 scr = sci_in(port, SCSCR);
 		u16 ssr = sci_in(port, SCxSR);
 
 		/* Disable future Rx interrupts */
-		sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE);
+		if (port->type == PORT_SCIFA) {
+			disable_irq_nosync(irq);
+			scr |= 0x4000;
+		} else {
+			scr &= ~SCI_CTRL_FLAGS_RIE;
+		}
+		sci_out(port, SCSCR, scr);
 		/* Clear current interrupt */
 		sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
-		/* Calculate delay for 1.5 DMA buffers */
-		tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
-			port->fifosize / 2;
-		dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n",
-			tout * 1000 / HZ);
-		if (tout < 2)
-			tout = 2;
-		mod_timer(&s->rx_timer, jiffies + tout);
+		dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
+			jiffies, s->rx_timeout);
+		mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
 
 		return IRQ_HANDLED;
 	}
@@ -799,7 +804,7 @@ static int sci_notifier(struct notifier_block *self,
 	    (phase == CPUFREQ_RESUMECHANGE)) {
 		spin_lock_irqsave(&priv->lock, flags);
 		list_for_each_entry(sci_port, &priv->ports, node)
-			sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+			sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
@@ -810,21 +815,17 @@ static void sci_clk_enable(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
 
-	clk_enable(sci_port->dclk);
-	sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
-
-	if (sci_port->iclk)
-		clk_enable(sci_port->iclk);
+	clk_enable(sci_port->iclk);
+	sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
+	clk_enable(sci_port->fclk);
 }
 
 static void sci_clk_disable(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
 
-	if (sci_port->iclk)
-		clk_disable(sci_port->iclk);
-
-	clk_disable(sci_port->dclk);
+	clk_disable(sci_port->fclk);
+	clk_disable(sci_port->iclk);
 }
 
 static int sci_request_irq(struct sci_port *port)
@@ -913,22 +914,26 @@ static void sci_dma_tx_complete(void *arg)
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	xmit->tail += s->sg_tx.length;
+	xmit->tail += sg_dma_len(&s->sg_tx);
 	xmit->tail &= UART_XMIT_SIZE - 1;
 
-	port->icount.tx += s->sg_tx.length;
+	port->icount.tx += sg_dma_len(&s->sg_tx);
 
 	async_tx_ack(s->desc_tx);
 	s->cookie_tx = -EINVAL;
 	s->desc_tx = NULL;
 
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (uart_circ_chars_pending(xmit))
+	if (!uart_circ_empty(xmit)) {
 		schedule_work(&s->work_tx);
+	} else if (port->type == PORT_SCIFA) {
+		u16 ctrl = sci_in(port, SCSCR);
+		sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
+	}
+
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /* Locking: called with port lock held */
@@ -972,13 +977,13 @@ static void sci_dma_rx_complete(void *arg)
 	unsigned long flags;
 	int count;
 
-	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+	dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
 
 	spin_lock_irqsave(&port->lock, flags);
 
 	count = sci_dma_rx_push(s, tty, s->buf_len_rx);
 
-	mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5));
+	mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
@@ -999,8 +1004,9 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
 	s->chan_rx = NULL;
 	s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
 	dma_release_channel(chan);
-	dma_free_coherent(port->dev, s->buf_len_rx * 2,
-			  sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
+	if (sg_dma_address(&s->sg_rx[0]))
+		dma_free_coherent(port->dev, s->buf_len_rx * 2,
+				  sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
 	if (enable_pio)
 		sci_start_rx(port);
 }
@@ -1050,6 +1056,8 @@ static void sci_submit_rx(struct sci_port *s)
 			sci_rx_dma_release(s, true);
 			return;
 		}
+		dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
+			s->cookie_rx[i], i);
 	}
 
 	s->active_rx = s->cookie_rx[0];
@@ -1084,7 +1092,7 @@ static void work_fn_rx(struct work_struct *work)
 		unsigned long flags;
 		int count;
 
-		chan->device->device_terminate_all(chan);
+		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
 		dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
 			sh_desc->partial, sh_desc->cookie);
 
@@ -1107,10 +1115,10 @@ static void work_fn_rx(struct work_struct *work)
 		return;
 	}
 
-	dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__,
-		s->cookie_rx[new], new);
-
 	s->active_rx = s->cookie_rx[!new];
+
+	dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
+		s->cookie_rx[new], new, s->active_rx);
 }
 
 static void work_fn_tx(struct work_struct *work)
@@ -1131,14 +1139,13 @@ static void work_fn_tx(struct work_struct *work)
 	 */
 	spin_lock_irq(&port->lock);
 	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
-	sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+	sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
 		sg->offset;
-	sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+	sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
 		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
-	sg->dma_length = sg->length;
 	spin_unlock_irq(&port->lock);
 
-	BUG_ON(!sg->length);
+	BUG_ON(!sg_dma_len(sg));
 
 	desc = chan->device->device_prep_slave_sg(chan,
 			sg, s->sg_len_tx, DMA_TO_DEVICE,
@@ -1173,23 +1180,28 @@ static void work_fn_tx(struct work_struct *work)
 
 static void sci_start_tx(struct uart_port *port)
 {
+	struct sci_port *s = to_sci_port(port);
 	unsigned short ctrl;
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	struct sci_port *s = to_sci_port(port);
-
-	if (s->chan_tx) {
-		if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0)
-			schedule_work(&s->work_tx);
-
-		return;
+	if (port->type == PORT_SCIFA) {
+		u16 new, scr = sci_in(port, SCSCR);
+		if (s->chan_tx)
+			new = scr | 0x8000;
+		else
+			new = scr & ~0x8000;
+		if (new != scr)
+			sci_out(port, SCSCR, new);
 	}
+	if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+	    s->cookie_tx < 0)
+		schedule_work(&s->work_tx);
 #endif
-
-	/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
-	ctrl = sci_in(port, SCSCR);
-	ctrl |= SCI_CTRL_FLAGS_TIE;
-	sci_out(port, SCSCR, ctrl);
+	if (!s->chan_tx || port->type == PORT_SCIFA) {
+		/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+		ctrl = sci_in(port, SCSCR);
+		sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
+	}
 }
 
 static void sci_stop_tx(struct uart_port *port)
@@ -1198,6 +1210,8 @@ static void sci_stop_tx(struct uart_port *port)
 
 	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
+	if (port->type == PORT_SCIFA)
+		ctrl &= ~0x8000;
 	ctrl &= ~SCI_CTRL_FLAGS_TIE;
 	sci_out(port, SCSCR, ctrl);
 }
@@ -1208,6 +1222,8 @@ static void sci_start_rx(struct uart_port *port)
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl |= sci_in(port, SCSCR);
+	if (port->type == PORT_SCIFA)
+		ctrl &= ~0x4000;
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -1217,6 +1233,8 @@ static void sci_stop_rx(struct uart_port *port)
 
 	/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
+	if (port->type == PORT_SCIFA)
+		ctrl &= ~0x4000;
 	ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
 	sci_out(port, SCSCR, ctrl);
 }
@@ -1251,8 +1269,12 @@ static void rx_timer_fn(unsigned long arg)
 {
 	struct sci_port *s = (struct sci_port *)arg;
 	struct uart_port *port = &s->port;
-
 	u16 scr = sci_in(port, SCSCR);
+
+	if (port->type == PORT_SCIFA) {
+		scr &= ~0x4000;
+		enable_irq(s->irqs[1]);
+	}
 	sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE);
 	dev_dbg(port->dev, "DMA Rx timed out\n");
 	schedule_work(&s->work_rx);
@@ -1339,8 +1361,7 @@ static void sci_request_dma(struct uart_port *port)
 			sg_init_table(sg, 1);
 			sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
 				    (int)buf[i] & ~PAGE_MASK);
-			sg->dma_address = dma[i];
-			sg->dma_length = sg->length;
+			sg_dma_address(sg) = dma[i];
 		}
 
 		INIT_WORK(&s->work_rx, work_fn_rx);
@@ -1403,8 +1424,12 @@ static void sci_shutdown(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct sci_port *s = to_sci_port(port);
+#endif
 	unsigned int status, baud, smr_val, max_baud;
 	int t = -1;
+	u16 scfcr = 0;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1427,7 +1452,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
 
 	if (port->type != PORT_SCI)
-		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+		sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
 
 	smr_val = sci_in(port, SCSMR) & 3;
 	if ((termios->c_cflag & CSIZE) == CS7)
@@ -1458,10 +1483,32 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	sci_init_pins(port, termios->c_cflag);
-	sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
+	sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0));
 
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	/*
+	 * Calculate delay for 1.5 DMA buffers: see
+	 * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
+	 * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
+	 * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
+	 * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
+	 * sizes), but it has been found out experimentally, that this is not
+	 * enough: the driver too often needlessly runs on a DMA timeout. 20ms
+	 * as a minimum seem to work perfectly.
+	 */
+	if (s->chan_rx) {
+		s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
+			port->fifosize / 2;
+		dev_dbg(port->dev,
+			"DMA Rx t-out %ums, tty t-out %u jiffies\n",
+			s->rx_timeout * 1000 / HZ, port->timeout);
+		if (s->rx_timeout < msecs_to_jiffies(20))
+			s->rx_timeout = msecs_to_jiffies(20);
+	}
+#endif
+
 	if ((termios->c_cflag & CREAD) != 0)
 		sci_start_rx(port);
 }
@@ -1553,10 +1600,10 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static void __devinit sci_init_single(struct platform_device *dev,
-				      struct sci_port *sci_port,
-				      unsigned int index,
-				      struct plat_sci_port *p)
+static int __devinit sci_init_single(struct platform_device *dev,
+				     struct sci_port *sci_port,
+				     unsigned int index,
+				     struct plat_sci_port *p)
 {
 	struct uart_port *port = &sci_port->port;
 
@@ -1577,8 +1624,23 @@ static void __devinit sci_init_single(struct platform_device *dev,
 	}
 
 	if (dev) {
-		sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
-		sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+		sci_port->iclk = clk_get(&dev->dev, "sci_ick");
+		if (IS_ERR(sci_port->iclk)) {
+			sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
+			if (IS_ERR(sci_port->iclk)) {
+				dev_err(&dev->dev, "can't get iclk\n");
+				return PTR_ERR(sci_port->iclk);
+			}
+		}
+
+		/*
+		 * The function clock is optional, ignore it if we can't
+		 * find it.
+		 */
+		sci_port->fclk = clk_get(&dev->dev, "sci_fck");
+		if (IS_ERR(sci_port->fclk))
+			sci_port->fclk = NULL;
+
 		sci_port->enable = sci_clk_enable;
 		sci_port->disable = sci_clk_disable;
 		port->dev = &dev->dev;
@@ -1605,6 +1667,7 @@ static void __devinit sci_init_single(struct platform_device *dev,
 #endif
 
 	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
+	return 0;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1754,8 +1817,11 @@ static int sci_remove(struct platform_device *dev)
 	cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	list_for_each_entry(p, &priv->ports, node)
+	list_for_each_entry(p, &priv->ports, node) {
 		uart_remove_one_port(&sci_uart_driver, &p->port);
+		clk_put(p->iclk);
+		clk_put(p->fclk);
+	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	kfree(priv);
@@ -1781,7 +1847,9 @@ static int __devinit sci_probe_single(struct platform_device *dev,
 		return 0;
 	}
 
-	sci_init_single(dev, sciport, index, p);
+	ret = sci_init_single(dev, sciport, index, p);
+	if (ret)
+		return ret;
 
 	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
 	if (ret)
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index d14cca7fb88..890f9174296 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -565,7 +565,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 	if (err)
 		goto out_free_con_read_page;
 
-	sunserial_console_match(&sunhv_console, op->node,
+	sunserial_console_match(&sunhv_console, op->dev.of_node,
 				&sunhv_reg, port->line, false);
 
 	err = uart_add_one_port(&sunhv_reg, port);
@@ -630,8 +630,11 @@ static const struct of_device_id hv_match[] = {
 MODULE_DEVICE_TABLE(of, hv_match);
 
 static struct of_platform_driver hv_driver = {
-	.name		= "hv",
-	.match_table	= hv_match,
+	.driver = {
+		.name = "hv",
+		.owner = THIS_MODULE,
+		.of_match_table = hv_match,
+	},
 	.probe		= hv_probe,
 	.remove		= __devexit_p(hv_remove),
 };
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d2e0321049e..5e81bc6b48b 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	printk("Console: ttyS%d (SAB82532)\n",
 	       (sunsab_reg.minor - 64) + con->index);
 
-	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
 
 	switch (con->cflag & CBAUD) {
 	case B150: baud = 150; break;
@@ -1026,11 +1026,11 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
 	if (err)
 		goto out1;
 
-	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
+	sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
 				&sunsab_reg, up[0].port.line,
 				false);
 
-	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
+	sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
 				&sunsab_reg, up[1].port.line,
 				false);
 
@@ -1093,8 +1093,11 @@ static const struct of_device_id sab_match[] = {
 MODULE_DEVICE_TABLE(of, sab_match);
 
 static struct of_platform_driver sab_driver = {
-	.name		= "sab",
-	.match_table	= sab_match,
+	.driver = {
+		.name = "sab",
+		.owner = THIS_MODULE,
+		.of_match_table = sab_match,
+	},
 	.probe		= sab_probe,
 	.remove		= __devexit_p(sab_remove),
 };
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 01f7731e59b..234459c2f01 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1200,7 +1200,7 @@ static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
 		return -ENODEV;
 
 	printk("%s: %s port at %llx, irq %u\n",
-	       to_of_device(up->port.dev)->node->full_name,
+	       to_of_device(up->port.dev)->dev.of_node->full_name,
 	       (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
 	       (unsigned long long) up->port.mapbase,
 	       up->port.irq);
@@ -1352,7 +1352,7 @@ static int __init sunsu_console_setup(struct console *co, char *options)
 	spin_lock_init(&port->lock);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(co, to_of_device(port->dev)->node);
+	sunserial_console_termios(co, to_of_device(port->dev)->dev.of_node);
 
 	memset(&termios, 0, sizeof(struct ktermios));
 	termios.c_cflag = co->cflag;
@@ -1409,7 +1409,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp)
 static int __devinit su_probe(struct of_device *op, const struct of_device_id *match)
 {
 	static int inst;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
 	enum su_type type;
@@ -1539,8 +1539,11 @@ static const struct of_device_id su_match[] = {
 MODULE_DEVICE_TABLE(of, su_match);
 
 static struct of_platform_driver su_driver = {
-	.name		= "su",
-	.match_table	= su_match,
+	.driver = {
+		.name = "su",
+		.owner = THIS_MODULE,
+		.of_match_table = su_match,
+	},
 	.probe		= su_probe,
 	.remove		= __devexit_p(su_remove),
 };
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 2c7a66af4f5..f9a24f4ebb3 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -102,6 +102,8 @@ struct uart_sunzilog_port {
 #endif
 };
 
+static void sunzilog_putchar(struct uart_port *port, int ch);
+
 #define ZILOG_CHANNEL_FROM_PORT(PORT)	((struct zilog_channel __iomem *)((PORT)->membase))
 #define UART_ZILOG(PORT)		((struct uart_sunzilog_port *)(PORT))
 
@@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *se
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int sunzilog_get_poll_char(struct uart_port *port)
+{
+	unsigned char ch, r1;
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel
+		= ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+
+	r1 = read_zsreg(channel, R1);
+	if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+		writeb(ERR_RES, &channel->control);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+	}
+
+	ch = readb(&channel->control);
+	ZSDELAY();
+
+	/* This funny hack depends upon BRK_ABRT not interfering
+	 * with the other bits we care about in R1.
+	 */
+	if (ch & BRK_ABRT)
+		r1 |= BRK_ABRT;
+
+	if (!(ch & Rx_CH_AV))
+		return NO_POLL_CHAR;
+
+	ch = readb(&channel->data);
+	ZSDELAY();
+
+	ch &= up->parity_mask;
+	return ch;
+}
+
+static void sunzilog_put_poll_char(struct uart_port *port,
+			unsigned char ch)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
+
+	sunzilog_putchar(&up->port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
 static struct uart_ops sunzilog_pops = {
 	.tx_empty	=	sunzilog_tx_empty,
 	.set_mctrl	=	sunzilog_set_mctrl,
@@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = {
 	.request_port	=	sunzilog_request_port,
 	.config_port	=	sunzilog_config_port,
 	.verify_port	=	sunzilog_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	sunzilog_get_poll_char,
+	.poll_put_char	=	sunzilog_put_poll_char,
+#endif
 };
 
 static int uart_chip_count;
@@ -1180,7 +1230,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
 	       (sunzilog_reg.minor - 64) + con->index, con->index);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
 
 	/* Firmware console speed is limited to 150-->38400 baud so
 	 * this hackish cflag thing is OK.
@@ -1358,7 +1408,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	int keyboard_mouse = 0;
 	int err;
 
-	if (of_find_property(op->node, "keyboard", NULL))
+	if (of_find_property(op->dev.of_node, "keyboard", NULL))
 		keyboard_mouse = 1;
 
 	/* uarts must come before keyboards/mice */
@@ -1415,7 +1465,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	sunzilog_init_hw(&up[1]);
 
 	if (!keyboard_mouse) {
-		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
 					    &sunzilog_reg, up[0].port.line,
 					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
@@ -1425,7 +1475,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 				   rp, sizeof(struct zilog_layout));
 			return err;
 		}
-		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
 					    &sunzilog_reg, up[1].port.line,
 					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
@@ -1491,8 +1541,11 @@ static const struct of_device_id zs_match[] = {
 MODULE_DEVICE_TABLE(of, zs_match);
 
 static struct of_platform_driver zs_driver = {
-	.name		= "zs",
-	.match_table	= zs_match,
+	.driver = {
+		.name = "zs",
+		.owner = THIS_MODULE,
+		.of_match_table = zs_match,
+	},
 	.probe		= zs_probe,
 	.remove		= __devexit_p(zs_remove),
 };
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 786ba85c170..67ca642713b 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -68,12 +68,22 @@ static void timbuart_start_tx(struct uart_port *port)
 	tasklet_schedule(&uart->tasklet);
 }
 
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+	u32 isr = ioread32(port->membase + TIMBUART_ISR);
+
+	return (isr & TXBE) ? TIOCSER_TEMT : 0;
+}
+
 static void timbuart_flush_buffer(struct uart_port *port)
 {
-	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+	if (!timbuart_tx_empty(port)) {
+		u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+			TIMBUART_CTRL_FLSHTX;
 
-	iowrite8(ctl, port->membase + TIMBUART_CTRL);
-	iowrite32(TXBF, port->membase + TIMBUART_ISR);
+		iowrite8(ctl, port->membase + TIMBUART_CTRL);
+		iowrite32(TXBF, port->membase + TIMBUART_ISR);
+	}
 }
 
 static void timbuart_rx_chars(struct uart_port *port)
@@ -195,13 +205,6 @@ void timbuart_tasklet(unsigned long arg)
 	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
 }
 
-static unsigned int timbuart_tx_empty(struct uart_port *port)
-{
-	u32 isr = ioread32(port->membase + TIMBUART_ISR);
-
-	return (isr & TXBE) ? TIOCSER_TEMT : 0;
-}
-
 static unsigned int timbuart_get_mctrl(struct uart_port *port)
 {
 	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
@@ -220,7 +223,7 @@ static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_RTS)
 		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
 	else
-		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+		iowrite8(0, port->membase + TIMBUART_CTRL);
 }
 
 static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index f0a6c61b17f..8acccd56437 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -86,7 +86,7 @@ static int ulite_receive(struct uart_port *port, int stat)
 	/* stats */
 	if (stat & ULITE_STATUS_RXVALID) {
 		port->icount.rx++;
-		ch = readb(port->membase + ULITE_RX);
+		ch = ioread32be(port->membase + ULITE_RX);
 
 		if (stat & ULITE_STATUS_PARITY)
 			port->icount.parity++;
@@ -131,7 +131,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
 		return 0;
 
 	if (port->x_char) {
-		writeb(port->x_char, port->membase + ULITE_TX);
+		iowrite32be(port->x_char, port->membase + ULITE_TX);
 		port->x_char = 0;
 		port->icount.tx++;
 		return 1;
@@ -140,7 +140,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return 0;
 
-	writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
+	iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX);
 	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
 	port->icount.tx++;
 
@@ -157,7 +157,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
 	int busy, n = 0;
 
 	do {
-		int stat = readb(port->membase + ULITE_STATUS);
+		int stat = ioread32be(port->membase + ULITE_STATUS);
 		busy  = ulite_receive(port, stat);
 		busy |= ulite_transmit(port, stat);
 		n++;
@@ -178,7 +178,7 @@ static unsigned int ulite_tx_empty(struct uart_port *port)
 	unsigned int ret;
 
 	spin_lock_irqsave(&port->lock, flags);
-	ret = readb(port->membase + ULITE_STATUS);
+	ret = ioread32be(port->membase + ULITE_STATUS);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
@@ -201,7 +201,7 @@ static void ulite_stop_tx(struct uart_port *port)
 
 static void ulite_start_tx(struct uart_port *port)
 {
-	ulite_transmit(port, readb(port->membase + ULITE_STATUS));
+	ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS));
 }
 
 static void ulite_stop_rx(struct uart_port *port)
@@ -230,17 +230,17 @@ static int ulite_startup(struct uart_port *port)
 	if (ret)
 		return ret;
 
-	writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
+	iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
 	       port->membase + ULITE_CONTROL);
-	writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+	iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 
 	return 0;
 }
 
 static void ulite_shutdown(struct uart_port *port)
 {
-	writeb(0, port->membase + ULITE_CONTROL);
-	readb(port->membase + ULITE_CONTROL); /* dummy */
+	iowrite32be(0, port->membase + ULITE_CONTROL);
+	ioread32be(port->membase + ULITE_CONTROL); /* dummy */
 	free_irq(port->irq, port);
 }
 
@@ -352,7 +352,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 
 	/* Spin waiting for TX fifo to have space available */
 	for (i = 0; i < 100000; i++) {
-		val = readb(port->membase + ULITE_STATUS);
+		val = ioread32be(port->membase + ULITE_STATUS);
 		if ((val & ULITE_STATUS_TXFULL) == 0)
 			break;
 		cpu_relax();
@@ -362,7 +362,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
 static void ulite_console_putchar(struct uart_port *port, int ch)
 {
 	ulite_console_wait_tx(port);
-	writeb(ch, port->membase + ULITE_TX);
+	iowrite32be(ch, port->membase + ULITE_TX);
 }
 
 static void ulite_console_write(struct console *co, const char *s,
@@ -379,8 +379,8 @@ static void ulite_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&port->lock, flags);
 
 	/* save and disable interrupt */
-	ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
-	writeb(0, port->membase + ULITE_CONTROL);
+	ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+	iowrite32be(0, port->membase + ULITE_CONTROL);
 
 	uart_console_write(port, s, count, ulite_console_putchar);
 
@@ -388,7 +388,7 @@ static void ulite_console_write(struct console *co, const char *s,
 
 	/* restore interrupt state */
 	if (ier)
-		writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+		iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
 
 	if (locked)
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -591,17 +591,17 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 
 	dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match);
 
-	rc = of_address_to_resource(op->node, 0, &res);
+	rc = of_address_to_resource(op->dev.of_node, 0, &res);
 	if (rc) {
 		dev_err(&op->dev, "invalid address\n");
 		return rc;
 	}
 
-	irq = irq_of_parse_and_map(op->node, 0);
+	irq = irq_of_parse_and_map(op->dev.of_node, 0);
 
-	id = of_get_property(op->node, "port-number", NULL);
+	id = of_get_property(op->dev.of_node, "port-number", NULL);
 
-	return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
+	return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
 }
 
 static int __devexit ulite_of_remove(struct of_device *op)
@@ -610,13 +610,12 @@ static int __devexit ulite_of_remove(struct of_device *op)
 }
 
 static struct of_platform_driver ulite_of_driver = {
-	.owner = THIS_MODULE,
-	.name = "uartlite",
-	.match_table = ulite_of_match,
 	.probe = ulite_of_probe,
 	.remove = __devexit_p(ulite_of_remove),
 	.driver = {
 		.name = "uartlite",
+		.owner = THIS_MODULE,
+		.of_match_table = ulite_of_match,
 	},
 };
 
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 074904912f6..907b06f5c44 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1197,7 +1197,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
 static int ucc_uart_probe(struct of_device *ofdev,
 	const struct of_device_id *match)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	const unsigned int *iprop;      /* Integer OF properties */
 	const char *sprop;      /* String OF properties */
 	struct uart_qe_port *qe_port = NULL;
@@ -1486,9 +1486,11 @@ static struct of_device_id ucc_uart_match[] = {
 MODULE_DEVICE_TABLE(of, ucc_uart_match);
 
 static struct of_platform_driver ucc_uart_of_driver = {
-	.owner  	= THIS_MODULE,
-	.name   	= "ucc_uart",
-	.match_table    = ucc_uart_match,
+	.driver = {
+		.name = "ucc_uart",
+		.owner = THIS_MODULE,
+		.of_match_table    = ucc_uart_match,
+	},
 	.probe  	= ucc_uart_probe,
 	.remove 	= ucc_uart_remove,
 };