summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-11-06 12:53:40 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2008-11-06 15:41:19 -0800
commit06a7f058761cd232cab42d5c7da82f7255b51d5b (patch)
tree252628da8a885a2f2c0ca6488e110a7e1fb2d169 /drivers/serial
parentb225d44e27521290faca2e0f9b1a4a8c74dc510a (diff)
atmel_serial: keep clock off when it's not needed
The atmel_serial driver is mismanaging its clock by leaving it on at all times ... the whole point of clock management is to leave it off unless it's actively needed, which conserves power!! Although the kernel doesn't actually hang without my fix, it does discard quite a lot of early console output. The result still looks correct: usart users= 1 on 35000000 Hz, for atmel_usart.0 usart users= 0 off 35000000 Hz, for atmel_usart.2 when using ttyS0 as serial console. [haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/atmel_serial.c17
1 files changed, 14 insertions, 3 deletions
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 61fb8b6d19a..d5efd6c7790 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1258,6 +1258,8 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_port->clk = clk_get(&pdev->dev, "usart");
clk_enable(atmel_port->clk);
port->uartclk = clk_get_rate(atmel_port->clk);
+ clk_disable(atmel_port->clk);
+ /* only enable clock when USART is in use */
}
atmel_port->use_dma_rx = data->use_dma_rx;
@@ -1379,6 +1381,8 @@ static int __init atmel_console_setup(struct console *co, char *options)
return -ENODEV;
}
+ clk_enable(atmel_ports[co->index].clk);
+
UART_PUT_IDR(port, -1);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -1403,7 +1407,7 @@ static struct console atmel_console = {
.data = &atmel_uart,
};
-#define ATMEL_CONSOLE_DEVICE &atmel_console
+#define ATMEL_CONSOLE_DEVICE (&atmel_console)
/*
* Early console initialization (before VM subsystem initialized).
@@ -1534,6 +1538,15 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
if (ret)
goto err_add_port;
+ if (atmel_is_console_port(&port->uart)
+ && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
+ /*
+ * The serial core enabled the clock for us, so undo
+ * the clk_enable() in atmel_console_setup()
+ */
+ clk_disable(port->clk);
+ }
+
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
@@ -1544,7 +1557,6 @@ err_add_port:
port->rx_ring.buf = NULL;
err_alloc_ring:
if (!atmel_is_console_port(&port->uart)) {
- clk_disable(port->clk);
clk_put(port->clk);
port->clk = NULL;
}
@@ -1568,7 +1580,6 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
/* "port" is allocated statically, so we shouldn't free it */
- clk_disable(atmel_port->clk);
clk_put(atmel_port->clk);
return ret;