Merge commit 'v2.6.26' into bkl-removal

10 files changed, 62 insertions, 65 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a1ca9b7bf2d..be95e55b228 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -93,7 +93,6 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
 #define CONFIG_HUB6 1
 
 #include <asm/serial.h>
-
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no
  * standard enumeration mechanism.   Platforms that can find all
@@ -2624,6 +2623,9 @@ static struct console serial8250_console = {
 
 static int __init serial8250_console_init(void)
 {
+	if (nr_uarts > UART_NR)
+		nr_uarts = UART_NR;
+
 	serial8250_isa_init_ports();
 	register_console(&serial8250_console);
 	return 0;
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53fa19cf2f0..788c3559522 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2602,7 +2602,12 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,	/* 135a.0811 */
 		pbn_b2_2_115200 },
-
+	/*
+	 * IntaShield IS-400
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
+		pbn_b2_4_115200 },
 	/*
 	 * Perle PCI-RAS cards
 	 */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 62e6eb136a3..9bc42763623 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1361,7 +1361,7 @@ config SERIAL_SC26XX_CONSOLE
 
 config SERIAL_BFIN_SPORT
 	tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
-	depends on BFIN && EXPERIMENTAL
+	depends on BLACKFIN && EXPERIMENTAL
 	select SERIAL_CORE
 	help
 	  Enble support SPORT emulate UART on Blackfin series.
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a704a93..42be8b01a40 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 	 * If the baud rate generator isn't running, the port wasn't
 	 * initialized by the boot loader.
 	 */
-	quot = UART_GET_BRGR(port);
+	quot = UART_GET_BRGR(port) & ATMEL_US_CD;
 	if (!quot)
 		return;
 
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead693b..fd9bb777df2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -49,6 +49,7 @@
 #define DMA_RX_YCOUNT		(PAGE_SIZE / DMA_RX_XCOUNT)
 
 #define DMA_RX_FLUSH_JIFFIES	(HZ / 50)
+#define CTS_CHECK_JIFFIES	(HZ / 50)
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
 	struct circ_buf *xmit = &uart->port.info->xmit;
 
-	if (uart->port.x_char) {
-		UART_PUT_CHAR(uart, uart->port.x_char);
-		uart->port.icount.tx++;
-		uart->port.x_char = 0;
-	}
 	/*
 	 * Check the modem control lines before
 	 * transmitting anything.
@@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		return;
 	}
 
+	if (uart->port.x_char) {
+		UART_PUT_CHAR(uart, uart->port.x_char);
+		uart->port.icount.tx++;
+		uart->port.x_char = 0;
+	}
+
 	while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
 		UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 }
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
-	struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
-	bfin_serial_mctrl_check(uart);
-}
-#endif
-
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
@@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
 	uart->tx_done = 0;
 
+	/*
+	 * Check the modem control lines before
+	 * transmitting anything.
+	 */
+	bfin_serial_mctrl_check(uart);
+
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 		uart->tx_count = 0;
 		uart->tx_done = 1;
@@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 		uart->port.x_char = 0;
 	}
 
-	/*
-	 * Check the modem control lines before
-	 * transmitting anything.
-	 */
-	bfin_serial_mctrl_check(uart);
-
 	uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
 	if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
 		uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -530,11 +523,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
 	if (uart->cts_pin < 0)
 		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 
-# ifdef BF54x
-	if (UART_GET_MSR(uart) & CTS)
-# else
-	if (gpio_get_value(uart->cts_pin))
-# endif
+	if (UART_GET_CTS(uart))
 		return TIOCM_DSR | TIOCM_CAR;
 	else
 #endif
@@ -549,17 +538,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		return;
 
 	if (mctrl & TIOCM_RTS)
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 0);
-# endif
+		UART_CLEAR_RTS(uart);
 	else
-# ifdef BF54x
-		UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
-		gpio_set_value(uart->rts_pin, 1);
-# endif
+		UART_SET_RTS(uart);
 #endif
 }
 
@@ -577,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
 	uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
 	if (!(status & TIOCM_CTS)) {
 		tty->hw_stopped = 1;
-		schedule_work(&uart->cts_workqueue);
+		uart->cts_timer.data = (unsigned long)(uart);
+		uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+		uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+		add_timer(&(uart->cts_timer));
 	} else {
 		tty->hw_stopped = 0;
 	}
@@ -752,11 +736,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
-	UART_CLEAR_IER(uart, 0xF);
-#else
-	UART_PUT_IER(uart, 0);
-#endif
+	UART_DISABLE_INTS(uart);
 
 	/* Set DLAB in LCR to Access DLL and DLH */
 	UART_SET_DLAB(uart);
@@ -771,11 +751,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	UART_PUT_LCR(uart, lcr);
 
 	/* Enable UART */
-#ifdef CONFIG_BF54x
-	UART_SET_IER(uart, ier);
-#else
-	UART_PUT_IER(uart, ier);
-#endif
+	UART_ENABLE_INTS(uart, ier);
 
 	val = UART_GET_GCTL(uart);
 	val |= UCEN;
@@ -833,15 +809,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
 {
-	int line = tty->index;
+	int line = port->line;
 	unsigned short val;
 
-	if (line >= tty->driver->num)
+	if (line >= port->info->tty->driver->num)
 		return;
 
-	switch (tty->ldisc.num) {
+	switch (port->info->tty->ldisc.num) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
@@ -866,6 +842,7 @@ static struct uart_ops bfin_serial_pops = {
 	.startup	= bfin_serial_startup,
 	.shutdown	= bfin_serial_shutdown,
 	.set_termios	= bfin_serial_set_termios,
+	.set_ldisc	= bfin_serial_set_ldisc,
 	.type		= bfin_serial_type,
 	.release_port	= bfin_serial_release_port,
 	.request_port	= bfin_serial_request_port,
@@ -904,7 +881,7 @@ static void __init bfin_serial_init_ports(void)
 		init_timer(&(bfin_serial_ports[i].rx_dma_timer));
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-		INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+		init_timer(&(bfin_serial_ports[i].cts_timer));
 		bfin_serial_ports[i].cts_pin	    =
 			bfin_serial_resource[i].uart_cts_pin;
 		bfin_serial_ports[i].rts_pin	    =
@@ -1206,7 +1183,6 @@ static int __init bfin_serial_init(void)
 
 	ret = uart_register_driver(&bfin_serial_reg);
 	if (ret == 0) {
-		bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
 		ret = platform_driver_register(&bfin_serial_driver);
 		if (ret) {
 			pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b3dbc..f8e1447a022 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init);
 
 static struct uart_driver sbd_reg = {
 	.owner		= THIS_MODULE,
-	.driver_name	= "serial",
+	.driver_name	= "sb1250_duart",
 	.dev_name	= "duart",
 	.major		= TTY_MAJOR,
 	.minor		= SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index eab03273379..42d2e108b67 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@ out:
 	return ret;
 }
 
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+	struct uart_state *state = tty->driver_data;
+	struct uart_port *port = state->port;
+
+	if (port->ops->set_ldisc)
+		port->ops->set_ldisc(port);
+}
+
 static void uart_set_termios(struct tty_struct *tty,
 						struct ktermios *old_termios)
 {
@@ -1982,7 +1991,9 @@ struct uart_match {
 static int serial_match_port(struct device *dev, void *data)
 {
 	struct uart_match *match = data;
-	dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+	struct tty_driver *tty_drv = match->driver->tty_driver;
+	dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+		match->port->line;
 
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
@@ -2054,6 +2065,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
+	struct device *tty_dev;
+	struct uart_match match = {port, drv};
 
 	mutex_lock(&state->mutex);
 
@@ -2063,7 +2076,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 		return 0;
 	}
 
-	if (!port->suspended) {
+	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	if (!port->suspended && device_may_wakeup(tty_dev)) {
 		disable_irq_wake(port->irq);
 		mutex_unlock(&state->mutex);
 		return 0;
@@ -2285,6 +2299,7 @@ static const struct tty_operations uart_ops = {
 	.unthrottle	= uart_unthrottle,
 	.send_xchar	= uart_send_xchar,
 	.set_termios	= uart_set_termios,
+	.set_ldisc	= uart_set_ldisc,
 	.stop		= uart_stop,
 	.start		= uart_start,
 	.hangup		= uart_hangup,
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8fdafc27fce..ce6ee92b3a1 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -184,15 +184,15 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
 			int h, l;
 
 			c = *p++;
-			h = highhex(c);
-			l = lowhex(c);
+			h = hex_asc_hi(c);
+			l = hex_asc_lo(c);
 			put_char(port, h);
 			put_char(port, l);
 			checksum += h + l;
 		}
 		put_char(port, '#');
-		put_char(port, highhex(checksum));
-		put_char(port, lowhex(checksum));
+		put_char(port, hex_asc_hi(checksum));
+		put_char(port, hex_asc_lo(checksum));
 	    } while  (get_char(port) != '+');
 	} else
 #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 145c0281495..2847336742d 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -499,7 +499,6 @@ static void sunhv_console_write_bychar(struct console *con, const char *s, unsig
 	} else
 		spin_lock(&port->lock);
 
-	spin_lock_irqsave(&port->lock, flags);
 	for (i = 0; i < n; i++) {
 		if (*s == '\n')
 			sunhv_console_putchar(port, '\r');
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c433f1..566a8b42e05 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@ struct uart_qe_port {
 
 static struct uart_driver ucc_uart_driver = {
 	.owner  	= THIS_MODULE,
-	.driver_name    = "serial",
+	.driver_name    = "ucc_uart",
 	.dev_name       = "ttyQE",
 	.major  	= SERIAL_QE_MAJOR,
 	.minor  	= SERIAL_QE_MINOR,