Merge tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi Updates from Mark Brown:
 "A busy release for both cleanups and new drivers this time along with
  further factoring out of replicated code into the core:

   - Provide support in the core for DMA mapping transfers - essentially
     all drivers weren't implementing this properly, now there's no
     excuse.
   - Dual and quad mode support for spidev.
   - Fix handling of cs_change in the generic implementation.
   - Remove the S3C_DMA code from the s3c64xx driver now that all the
     platforms using it have been converted to dmaengine.
   - Lots of improvements to the Renesas SPI controllers.
   - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga.
   - Removal of the bitrotted ti-ssp driver"

* tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (199 commits)
  spi: Fix handling of cs_change in core implementation
  spi: bitbang: Make spi_bitbang_stop() return void
  spi: mpc52xx: Convert to use bits_per_word_mask
  spi: omap-100k: Fix memory leak
  spi: dw: Don't call kfree for memory allocated by devm_kzalloc
  spi: fsl-dspi: Fix memory leak
  spi: omap-uwire: add missing iounmap
  spi: clps711x: Convert to use master->max_speed_hz
  spi: clps711x: Enable driver compilation with COMPILE_TEST
  spi: omap-uwire: Remove full duplex check
  spi: Do not require a completion
  spi: topcliff-pch: Transform noisy message to dev_vdbg
  spi: coldfire-qspi: Simplify the code to set register bits for transfer speed
  spi: bcm63xx: Remove unused define for PFX
  spi: efm32: use $vendor,$device scheme for compatible string
  spi: clps711x: Remove <mach/hardware.h> dependency
  spi: topcliff-pch: Properly unregister platform devices on probe() error paths
  spi: fsl-espi: Remove unused bits_per_word variable in fsl_espi_bufs
  spi: altera: Remove the code to get unused platform_data
  spi: fsl-lib: Fix memory leak of pinfo
  ...

1 files changed, 5 insertions, 29 deletions

diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 9313fd3b413..be2a2e108e2 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -99,7 +99,6 @@ struct uwire_spi {
 };
 
 struct uwire_state {
-	unsigned	bits_per_word;
 	unsigned	div1_idx;
 };
 
@@ -210,9 +209,8 @@ static void uwire_chipselect(struct spi_device *spi, int value)
 
 static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct uwire_state *ust = spi->controller_state;
 	unsigned	len = t->len;
-	unsigned	bits = ust->bits_per_word;
+	unsigned	bits = t->bits_per_word ? : spi->bits_per_word;
 	unsigned	bytes;
 	u16		val, w;
 	int		status = 0;
@@ -220,10 +218,6 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
 	if (!t->tx_buf && !t->rx_buf)
 		return 0;
 
-	/* Microwire doesn't read and write concurrently */
-	if (t->tx_buf && t->rx_buf)
-		return -EPERM;
-
 	w = spi->chip_select << 10;
 	w |= CS_CMD;
 
@@ -322,7 +316,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 	struct uwire_state	*ust = spi->controller_state;
 	struct uwire_spi	*uwire;
 	unsigned		flags = 0;
-	unsigned		bits;
 	unsigned		hz;
 	unsigned long		rate;
 	int			div1_idx;
@@ -332,23 +325,6 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	uwire = spi_master_get_devdata(spi->master);
 
-	if (spi->chip_select > 3) {
-		pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select);
-		status = -ENODEV;
-		goto done;
-	}
-
-	bits = spi->bits_per_word;
-	if (t != NULL && t->bits_per_word)
-		bits = t->bits_per_word;
-
-	if (bits > 16) {
-		pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits);
-		status = -ENODEV;
-		goto done;
-	}
-	ust->bits_per_word = bits;
-
 	/* mode 0..3, clock inverted separately;
 	 * standard nCS signaling;
 	 * don't treat DI=high as "not ready"
@@ -502,6 +478,7 @@ static int uwire_probe(struct platform_device *pdev)
 		status = PTR_ERR(uwire->ck);
 		dev_dbg(&pdev->dev, "no functional clock?\n");
 		spi_master_put(master);
+		iounmap(uwire_base);
 		return status;
 	}
 	clk_enable(uwire->ck);
@@ -515,7 +492,7 @@ static int uwire_probe(struct platform_device *pdev)
 
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-
+	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
 	master->flags = SPI_MASTER_HALF_DUPLEX;
 
 	master->bus_num = 2;	/* "official" */
@@ -539,14 +516,13 @@ static int uwire_probe(struct platform_device *pdev)
 static int uwire_remove(struct platform_device *pdev)
 {
 	struct uwire_spi	*uwire = platform_get_drvdata(pdev);
-	int			status;
 
 	// FIXME remove all child devices, somewhere ...
 
-	status = spi_bitbang_stop(&uwire->bitbang);
+	spi_bitbang_stop(&uwire->bitbang);
 	uwire_off(uwire);
 	iounmap(uwire_base);
-	return status;
+	return 0;
 }
 
 /* work with hotplug and coldplug */