diff options
author | David Brownell <david-b@pacbell.net> | 2006-01-08 13:34:26 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2006-01-13 16:29:55 -0800 |
commit | 9904f22a7202c6b54e96b0cc9870817013c350a1 (patch) | |
tree | 02d526b1bf54b1c64e58a9f903269f9cdc6ec83c /drivers/spi/spi_bitbang.c | |
parent | 2e5a7bd978bf4118a0c8edf2e6ff81d0a72fee47 (diff) |
[PATCH] spi: add spi_bitbang driver
This adds a bitbanging spi master, hooking up to board/adapter-specific glue
code which knows how to set and read the signals (gpios etc).
This code kicks in after the glue code creates a platform_device with the
right platform_data. That data includes I/O loops, which will usually
come from expanding an inline function (provided in the header). One goal
is that the I/O loops should be easily optimized down to a few GPIO register
accesses, in common cases, for speed and minimized overhead.
This understands all the currently defined protocol tweaking options in the
SPI framework, and might eventually serve as as reference implementation.
- different word sizes (1..32 bits)
- differing clock rates
- SPI modes differing by CPOL (affecting chip select and I/O loops)
- SPI modes differing by CPHA (affecting I/O loops)
- delays (usecs) after transfers
- temporarily deselecting chips in mid-transfer
A lot of hardware could work with this framework, though common types of
controller can't reach peak performance without switching to a driver
structure that supports pipelining of transfers (e.g. DMA queues) and maybe
controllers (e.g. IRQ driven).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/spi/spi_bitbang.c')
-rw-r--r-- | drivers/spi/spi_bitbang.c | 460 |
1 files changed, 460 insertions, 0 deletions
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c new file mode 100644 index 00000000000..44aff198eb9 --- /dev/null +++ b/drivers/spi/spi_bitbang.c @@ -0,0 +1,460 @@ +/* + * spi_bitbang.c - polling/bitbanging SPI master controller driver utilities + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/platform_device.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + + +/*----------------------------------------------------------------------*/ + +/* + * FIRST PART (OPTIONAL): word-at-a-time spi_transfer support. + * Use this for GPIO or shift-register level hardware APIs. + * + * spi_bitbang_cs is in spi_device->controller_state, which is unavailable + * to glue code. These bitbang setup() and cleanup() routines are always + * used, though maybe they're called from controller-aware code. + * + * chipselect() and friends may use use spi_device->controller_data and + * controller registers as appropriate. + * + * + * NOTE: SPI controller pins can often be used as GPIO pins instead, + * which means you could use a bitbang driver either to get hardware + * working quickly, or testing for differences that aren't speed related. + */ + +struct spi_bitbang_cs { + unsigned nsecs; /* (clock cycle time)/2 */ + u32 (*txrx_word)(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits); + unsigned (*txrx_bufs)(struct spi_device *, + u32 (*txrx_word)( + struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned, struct spi_transfer *); +}; + +static unsigned bitbang_txrx_8( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u8 *tx = t->tx_buf; + u8 *rx = t->rx_buf; + + while (likely(count > 0)) { + u8 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 1; + } + return t->len - count; +} + +static unsigned bitbang_txrx_16( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u16 *tx = t->tx_buf; + u16 *rx = t->rx_buf; + + while (likely(count > 1)) { + u16 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 2; + } + return t->len - count; +} + +static unsigned bitbang_txrx_32( + struct spi_device *spi, + u32 (*txrx_word)(struct spi_device *spi, + unsigned nsecs, + u32 word, u8 bits), + unsigned ns, + struct spi_transfer *t +) { + unsigned bits = spi->bits_per_word; + unsigned count = t->len; + const u32 *tx = t->tx_buf; + u32 *rx = t->rx_buf; + + while (likely(count > 3)) { + u32 word = 0; + + if (tx) + word = *tx++; + word = txrx_word(spi, ns, word, bits); + if (rx) + *rx++ = word; + count -= 4; + } + return t->len - count; +} + +/** + * spi_bitbang_setup - default setup for per-word I/O loops + */ +int spi_bitbang_setup(struct spi_device *spi) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + struct spi_bitbang *bitbang; + + if (!cs) { + cs = kzalloc(sizeof *cs, SLAB_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + bitbang = spi_master_get_devdata(spi->master); + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + /* spi_transfer level calls that work per-word */ + if (spi->bits_per_word <= 8) + cs->txrx_bufs = bitbang_txrx_8; + else if (spi->bits_per_word <= 16) + cs->txrx_bufs = bitbang_txrx_16; + else if (spi->bits_per_word <= 32) + cs->txrx_bufs = bitbang_txrx_32; + else + return -EINVAL; + + /* per-word shift register access, in hardware or bitbanging */ + cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)]; + if (!cs->txrx_word) + return -EINVAL; + + if (!spi->max_speed_hz) + spi->max_speed_hz = 500 * 1000; + + /* nsecs = max(50, (clock period)/2), be optimistic */ + cs->nsecs = (1000000000/2) / (spi->max_speed_hz); + if (cs->nsecs < 50) + cs->nsecs = 50; + if (cs->nsecs > MAX_UDELAY_MS * 1000) + return -EINVAL; + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n", + __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA), + spi->bits_per_word, 2 * cs->nsecs); + + /* NOTE we _need_ to call chipselect() early, ideally with adapter + * setup, unless the hardware defaults cooperate to avoid confusion + * between normal (active low) and inverted chipselects. + */ + + /* deselect chip (low or high) */ + spin_lock(&bitbang->lock); + if (!bitbang->busy) { + bitbang->chipselect(spi, 0); + ndelay(cs->nsecs); + } + spin_unlock(&bitbang->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_setup); + +/** + * spi_bitbang_cleanup - default cleanup for per-word I/O loops + */ +void spi_bitbang_cleanup(const struct spi_device *spi) +{ + kfree(spi->controller_state); +} +EXPORT_SYMBOL_GPL(spi_bitbang_cleanup); + +static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct spi_bitbang_cs *cs = spi->controller_state; + unsigned nsecs = cs->nsecs; + + return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t); +} + +/*----------------------------------------------------------------------*/ + +/* + * SECOND PART ... simple transfer queue runner. + * + * This costs a task context per controller, running the queue by + * performing each transfer in sequence. Smarter hardware can queue + * several DMA transfers at once, and process several controller queues + * in parallel; this driver doesn't match such hardware very well. + * + * Drivers can provide word-at-a-time i/o primitives, or provide + * transfer-at-a-time ones to leverage dma or fifo hardware. + */ +static void bitbang_work(void *_bitbang) +{ + struct spi_bitbang *bitbang = _bitbang; + unsigned long flags; + + spin_lock_irqsave(&bitbang->lock, flags); + bitbang->busy = 1; + while (!list_empty(&bitbang->queue)) { + struct spi_message *m; + struct spi_device *spi; + unsigned nsecs; + struct spi_transfer *t; + unsigned tmp; + unsigned chipselect; + int status; + + m = container_of(bitbang->queue.next, struct spi_message, + queue); + list_del_init(&m->queue); + spin_unlock_irqrestore(&bitbang->lock, flags); + +// FIXME this is made-up +nsecs = 100; + + spi = m->spi; + t = m->transfers; + tmp = 0; + chipselect = 0; + status = 0; + + for (;;t++) { + if (bitbang->shutdown) { + status = -ESHUTDOWN; + break; + } + + /* set up default clock polarity, and activate chip */ + if (!chipselect) { + bitbang->chipselect(spi, 1); + ndelay(nsecs); + } + if (!t->tx_buf && !t->rx_buf && t->len) { + status = -EINVAL; + break; + } + + /* transfer data */ + if (t->len) { + /* FIXME if bitbang->use_dma, dma_map_single() + * before the transfer, and dma_unmap_single() + * afterwards, for either or both buffers... + */ + status = bitbang->txrx_bufs(spi, t); + } + if (status != t->len) { + if (status > 0) + status = -EMSGSIZE; + break; + } + m->actual_length += status; + status = 0; + + /* protocol tweaks before next transfer */ + if (t->delay_usecs) + udelay(t->delay_usecs); + + tmp++; + if (tmp >= m->n_transfer) + break; + + chipselect = !t->cs_change; + if (chipselect); + continue; + + bitbang->chipselect(spi, 0); + + /* REVISIT do we want the udelay here instead? */ + msleep(1); + } + + tmp = m->n_transfer - 1; + tmp = m->transfers[tmp].cs_change; + + m->status = status; + m->complete(m->context); + + ndelay(2 * nsecs); + bitbang->chipselect(spi, status == 0 && tmp); + ndelay(nsecs); + + spin_lock_irqsave(&bitbang->lock, flags); + } + bitbang->busy = 0; + spin_unlock_irqrestore(&bitbang->lock, flags); +} + +/** + * spi_bitbang_transfer - default submit to transfer queue + */ +int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct spi_bitbang *bitbang; + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + bitbang = spi_master_get_devdata(spi->master); + if (bitbang->shutdown) + return -ESHUTDOWN; + + spin_lock_irqsave(&bitbang->lock, flags); + list_add_tail(&m->queue, &bitbang->queue); + queue_work(bitbang->workqueue, &bitbang->work); + spin_unlock_irqrestore(&bitbang->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_transfer); + +/*----------------------------------------------------------------------*/ + +/** + * spi_bitbang_start - start up a polled/bitbanging SPI master driver + * @bitbang: driver handle + * + * Caller should have zero-initialized all parts of the structure, and then + * provided callbacks for chip selection and I/O loops. If the master has + * a transfer method, its final step should call spi_bitbang_transfer; or, + * that's the default if the transfer routine is not initialized. It should + * also set up the bus number and number of chipselects. + * + * For i/o loops, provide callbacks either per-word (for bitbanging, or for + * hardware that basically exposes a shift register) or per-spi_transfer + * (which takes better advantage of hardware like fifos or DMA engines). + * + * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup and + * spi_bitbang_cleanup to handle those spi master methods. Those methods are + * the defaults if the bitbang->txrx_bufs routine isn't initialized. + * + * This routine registers the spi_master, which will process requests in a + * dedicated task, keeping IRQs unblocked most of the time. To stop + * processing those requests, call spi_bitbang_stop(). + */ +int spi_bitbang_start(struct spi_bitbang *bitbang) +{ + int status; + + if (!bitbang->master || !bitbang->chipselect) + return -EINVAL; + + INIT_WORK(&bitbang->work, bitbang_work, bitbang); + spin_lock_init(&bitbang->lock); + INIT_LIST_HEAD(&bitbang->queue); + + if (!bitbang->master->transfer) + bitbang->master->transfer = spi_bitbang_transfer; + if (!bitbang->txrx_bufs) { + bitbang->use_dma = 0; + bitbang->txrx_bufs = spi_bitbang_bufs; + if (!bitbang->master->setup) { + bitbang->master->setup = spi_bitbang_setup; + bitbang->master->cleanup = spi_bitbang_cleanup; + } + } else if (!bitbang->master->setup) + return -EINVAL; + + /* this task is the only thing to touch the SPI bits */ + bitbang->busy = 0; + bitbang->workqueue = create_singlethread_workqueue( + bitbang->master->cdev.dev->bus_id); + if (bitbang->workqueue == NULL) { + status = -EBUSY; + goto err1; + } + + /* driver may get busy before register() returns, especially + * if someone registered boardinfo for devices + */ + status = spi_register_master(bitbang->master); + if (status < 0) + goto err2; + + return status; + +err2: + destroy_workqueue(bitbang->workqueue); +err1: + return status; +} +EXPORT_SYMBOL_GPL(spi_bitbang_start); + +/** + * spi_bitbang_stop - stops the task providing spi communication + */ +int spi_bitbang_stop(struct spi_bitbang *bitbang) +{ + unsigned limit = 500; + + spin_lock_irq(&bitbang->lock); + bitbang->shutdown = 0; + while (!list_empty(&bitbang->queue) && limit--) { + spin_unlock_irq(&bitbang->lock); + + dev_dbg(bitbang->master->cdev.dev, "wait for queue\n"); + msleep(10); + + spin_lock_irq(&bitbang->lock); + } + spin_unlock_irq(&bitbang->lock); + if (!list_empty(&bitbang->queue)) { + dev_err(bitbang->master->cdev.dev, "queue didn't empty\n"); + return -EBUSY; + } + + destroy_workqueue(bitbang->workqueue); + + spi_unregister_master(bitbang->master); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_bitbang_stop); + +MODULE_LICENSE("GPL"); + |