spi: reorganize drivers

Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 351 deletions

diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c
deleted file mode 100644
index 7746a41ab6d..00000000000
--- a/drivers/spi/spi_lm70llp.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor
- *
- * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/parport.h>
-#include <linux/sysfs.h>
-#include <linux/workqueue.h>
-
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-
-/*
- * The LM70 communicates with a host processor using a 3-wire variant of
- * the SPI/Microwire bus interface. This driver specifically supports an
- * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel
- * port to bitbang an SPI-parport bridge.  Accordingly, this is an SPI
- * master controller driver.  The hwmon/lm70 driver is a "SPI protocol
- * driver", layered on top of this one and usable without the lm70llp.
- *
- * Datasheet and Schematic:
- * The LM70 is a temperature sensor chip from National Semiconductor; its
- * datasheet is available at http://www.national.com/pf/LM/LM70.html
- * The schematic for this particular board (the LM70EVAL-LLP) is
- * available (on page 4) here:
- *  http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf
- *
- * Also see Documentation/spi/spi-lm70llp.  The SPI<->parport code here is
- * (heavily) based on spi-butterfly by David Brownell.
- *
- * The LM70 LLP connects to the PC parallel port in the following manner:
- *
- *   Parallel                 LM70 LLP
- *     Port      Direction   JP2 Header
- *  -----------  ---------  ------------
- *      D0    2      -         -
- *      D1    3     -->      V+   5
- *      D2    4     -->      V+   5
- *      D3    5     -->      V+   5
- *      D4    6     -->      V+   5
- *      D5    7     -->      nCS  8
- *      D6    8     -->      SCLK 3
- *      D7    9     -->      SI/O 5
- *     GND   25      -       GND  7
- *    Select 13     <--      SI/O 1
- *
- * Note that parport pin 13 actually gets inverted by the transistor
- * arrangement which lets either the parport or the LM70 drive the
- * SI/SO signal (see the schematic for details).
- */
-
-#define DRVNAME		"spi-lm70llp"
-
-#define lm70_INIT	0xBE
-#define SIO		0x10
-#define nCS		0x20
-#define SCLK		0x40
-
-/*-------------------------------------------------------------------------*/
-
-struct spi_lm70llp {
-	struct spi_bitbang	bitbang;
-	struct parport		*port;
-	struct pardevice	*pd;
-	struct spi_device	*spidev_lm70;
-	struct spi_board_info	info;
-	//struct device		*dev;
-};
-
-/* REVISIT : ugly global ; provides "exclusive open" facility */
-static struct spi_lm70llp *lm70llp;
-
-
-/*-------------------------------------------------------------------*/
-
-static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi)
-{
-	return spi->controller_data;
-}
-
-/*---------------------- LM70 LLP eval board-specific inlines follow */
-
-/* NOTE:  we don't actually need to reread the output values, since they'll
- * still be what we wrote before.  Plus, going through parport builds in
- * a ~1ms/operation delay; these SPI transfers could easily be faster.
- */
-
-static inline void deassertCS(struct spi_lm70llp *pp)
-{
-	u8 data = parport_read_data(pp->port);
-
-	data &= ~0x80;		/* pull D7/SI-out low while de-asserted */
-	parport_write_data(pp->port, data | nCS);
-}
-
-static inline void assertCS(struct spi_lm70llp *pp)
-{
-	u8 data = parport_read_data(pp->port);
-
-	data |= 0x80;		/* pull D7/SI-out high so lm70 drives SO-in */
-	parport_write_data(pp->port, data & ~nCS);
-}
-
-static inline void clkHigh(struct spi_lm70llp *pp)
-{
-	u8 data = parport_read_data(pp->port);
-	parport_write_data(pp->port, data | SCLK);
-}
-
-static inline void clkLow(struct spi_lm70llp *pp)
-{
-	u8 data = parport_read_data(pp->port);
-	parport_write_data(pp->port, data & ~SCLK);
-}
-
-/*------------------------- SPI-LM70-specific inlines ----------------------*/
-
-static inline void spidelay(unsigned d)
-{
-	udelay(d);
-}
-
-static inline void setsck(struct spi_device *s, int is_on)
-{
-	struct spi_lm70llp *pp = spidev_to_pp(s);
-
-	if (is_on)
-		clkHigh(pp);
-	else
-		clkLow(pp);
-}
-
-static inline void setmosi(struct spi_device *s, int is_on)
-{
-	/* FIXME update D7 ... this way we can put the chip
-	 * into shutdown mode and read the manufacturer ID,
-	 * but we can't put it back into operational mode.
-	 */
-}
-
-/*
- * getmiso:
- * Why do we return 0 when the SIO line is high and vice-versa?
- * The fact is, the lm70 eval board from NS (which this driver drives),
- * is wired in just such a way : when the lm70's SIO goes high, a transistor
- * switches it to low reflecting this on the parport (pin 13), and vice-versa.
- */
-static inline int getmiso(struct spi_device *s)
-{
-	struct spi_lm70llp *pp = spidev_to_pp(s);
-	return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 );
-}
-/*--------------------------------------------------------------------*/
-
-#include "spi_bitbang_txrx.h"
-
-static void lm70_chipselect(struct spi_device *spi, int value)
-{
-	struct spi_lm70llp *pp = spidev_to_pp(spi);
-
-	if (value)
-		assertCS(pp);
-	else
-		deassertCS(pp);
-}
-
-/*
- * Our actual bitbanger routine.
- */
-static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
-{
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
-}
-
-static void spi_lm70llp_attach(struct parport *p)
-{
-	struct pardevice	*pd;
-	struct spi_lm70llp	*pp;
-	struct spi_master	*master;
-	int			status;
-
-	if (lm70llp) {
-		printk(KERN_WARNING
-			"%s: spi_lm70llp instance already loaded. Aborting.\n",
-			DRVNAME);
-		return;
-	}
-
-	/* TODO:  this just _assumes_ a lm70 is there ... no probe;
-	 * the lm70 driver could verify it, reading the manf ID.
-	 */
-
-	master = spi_alloc_master(p->physport->dev, sizeof *pp);
-	if (!master) {
-		status = -ENOMEM;
-		goto out_fail;
-	}
-	pp = spi_master_get_devdata(master);
-
-	master->bus_num = -1;	/* dynamic alloc of a bus number */
-	master->num_chipselect = 1;
-
-	/*
-	 * SPI and bitbang hookup.
-	 */
-	pp->bitbang.master = spi_master_get(master);
-	pp->bitbang.chipselect = lm70_chipselect;
-	pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx;
-	pp->bitbang.flags = SPI_3WIRE;
-
-	/*
-	 * Parport hookup
-	 */
-	pp->port = p;
-	pd = parport_register_device(p, DRVNAME,
-			NULL, NULL, NULL,
-			PARPORT_FLAG_EXCL, pp);
-	if (!pd) {
-		status = -ENOMEM;
-		goto out_free_master;
-	}
-	pp->pd = pd;
-
-	status = parport_claim(pd);
-	if (status < 0)
-		goto out_parport_unreg;
-
-	/*
-	 * Start SPI ...
-	 */
-	status = spi_bitbang_start(&pp->bitbang);
-	if (status < 0) {
-		printk(KERN_WARNING
-			"%s: spi_bitbang_start failed with status %d\n",
-			DRVNAME, status);
-		goto out_off_and_release;
-	}
-
-	/*
-	 * The modalias name MUST match the device_driver name
-	 * for the bus glue code to match and subsequently bind them.
-	 * We are binding to the generic drivers/hwmon/lm70.c device
-	 * driver.
-	 */
-	strcpy(pp->info.modalias, "lm70");
-	pp->info.max_speed_hz = 6 * 1000 * 1000;
-	pp->info.chip_select = 0;
-	pp->info.mode = SPI_3WIRE | SPI_MODE_0;
-
-	/* power up the chip, and let the LM70 control SI/SO */
-	parport_write_data(pp->port, lm70_INIT);
-
-	/* Enable access to our primary data structure via
-	 * the board info's (void *)controller_data.
-	 */
-	pp->info.controller_data = pp;
-	pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
-	if (pp->spidev_lm70)
-		dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
-				dev_name(&pp->spidev_lm70->dev));
-	else {
-		printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME);
-		status = -ENODEV;
-		goto out_bitbang_stop;
-	}
-	pp->spidev_lm70->bits_per_word = 8;
-
-	lm70llp = pp;
-	return;
-
-out_bitbang_stop:
-	spi_bitbang_stop(&pp->bitbang);
-out_off_and_release:
-	/* power down */
-	parport_write_data(pp->port, 0);
-	mdelay(10);
-	parport_release(pp->pd);
-out_parport_unreg:
-	parport_unregister_device(pd);
-out_free_master:
-	(void) spi_master_put(master);
-out_fail:
-	pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status);
-}
-
-static void spi_lm70llp_detach(struct parport *p)
-{
-	struct spi_lm70llp		*pp;
-
-	if (!lm70llp || lm70llp->port != p)
-		return;
-
-	pp = lm70llp;
-	spi_bitbang_stop(&pp->bitbang);
-
-	/* power down */
-	parport_write_data(pp->port, 0);
-
-	parport_release(pp->pd);
-	parport_unregister_device(pp->pd);
-
-	(void) spi_master_put(pp->bitbang.master);
-
-	lm70llp = NULL;
-}
-
-
-static struct parport_driver spi_lm70llp_drv = {
-	.name =		DRVNAME,
-	.attach =	spi_lm70llp_attach,
-	.detach =	spi_lm70llp_detach,
-};
-
-static int __init init_spi_lm70llp(void)
-{
-	return parport_register_driver(&spi_lm70llp_drv);
-}
-module_init(init_spi_lm70llp);
-
-static void __exit cleanup_spi_lm70llp(void)
-{
-	parport_unregister_driver(&spi_lm70llp_drv);
-}
-module_exit(cleanup_spi_lm70llp);
-
-MODULE_AUTHOR("Kaiwan N Billimoria <kaiwan@designergraphix.com>");
-MODULE_DESCRIPTION(
-	"Parport adapter for the National Semiconductor LM70 LLP eval board");
-MODULE_LICENSE("GPL");