summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorMagnus Damm <magnus.damm@gmail.com>2008-02-06 01:38:15 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2008-02-06 10:41:11 -0800
commit37e466408796300ec935e15f01b4ca88678b96ef (patch)
tree946465d14460a9dec3552c746850d4706c5981f1 /drivers/spi
parentb359fbc4582abf346fa6773b2bc1d63581fda582 (diff)
spi: SuperH SPI using SCI
Add support for SPI over SCI pins. SCI is a very simple serial controller block that can be found on older SuperH processors. In theory it is possible to use the SCI hardware block in syncronous mode, but this version of the driver simply hooks up the bit banging code on the SCI pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig7
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi_sh_sci.c205
3 files changed, 213 insertions, 0 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index aaaea81e412..69e28ed272c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -176,6 +176,13 @@ config SPI_S3C24XX_GPIO
the inbuilt hardware cannot provide the transfer mode, or
where the board is using non hardware connected pins.
+config SPI_SH_SCI
+ tristate "SuperH SCI SPI controller"
+ depends on SPI_MASTER && SUPERH
+ select SPI_BITBANG
+ help
+ SPI driver for SuperH SCI blocks.
+
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
depends on SPI_MASTER && GENERIC_GPIO && CPU_TX49XX
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 41fbac45c32..7fca043ce72 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c
new file mode 100644
index 00000000000..3dbe71b16d6
--- /dev/null
+++ b/drivers/spi/spi_sh_sci.c
@@ -0,0 +1,205 @@
+/*
+ * SH SCI SPI interface
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * Based on S3C24XX GPIO based SPI driver, which is:
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/spi.h>
+#include <asm/io.h>
+
+struct sh_sci_spi {
+ struct spi_bitbang bitbang;
+
+ void __iomem *membase;
+ unsigned char val;
+ struct sh_spi_info *info;
+ struct platform_device *dev;
+};
+
+#define SCSPTR(sp) (sp->membase + 0x1c)
+#define PIN_SCK (1 << 2)
+#define PIN_TXD (1 << 0)
+#define PIN_RXD PIN_TXD
+#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD)
+
+static inline void setbits(struct sh_sci_spi *sp, int bits, int on)
+{
+ /*
+ * We are the only user of SCSPTR so no locking is required.
+ * Reading bit 2 and 0 in SCSPTR gives pin state as input.
+ * Writing the same bits sets the output value.
+ * This makes regular read-modify-write difficult so we
+ * use sp->val to keep track of the latest register value.
+ */
+
+ if (on)
+ sp->val |= bits;
+ else
+ sp->val &= ~bits;
+
+ iowrite8(sp->val, SCSPTR(sp));
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+ setbits(spi_master_get_devdata(dev->master), PIN_SCK, on);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+ setbits(spi_master_get_devdata(dev->master), PIN_TXD, on);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+ struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
+
+ return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
+{
+ struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
+
+ if (sp->info && sp->info->chip_select)
+ (sp->info->chip_select)(sp->info, dev->chip_select, value);
+}
+
+static int sh_sci_spi_probe(struct platform_device *dev)
+{
+ struct resource *r;
+ struct spi_master *master;
+ struct sh_sci_spi *sp;
+ int ret;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi));
+ if (master == NULL) {
+ dev_err(&dev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ sp = spi_master_get_devdata(master);
+
+ platform_set_drvdata(dev, sp);
+ sp->info = dev->dev.platform_data;
+
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master->bus_num = sp->info->bus_num;
+ sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
+ sp->bitbang.chipselect = sh_sci_spi_chipselect;
+
+ sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1;
+ sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2;
+ sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENOENT;
+ goto err1;
+ }
+ sp->membase = ioremap(r->start, r->end - r->start + 1);
+ if (!sp->membase) {
+ ret = -ENXIO;
+ goto err1;
+ }
+ sp->val = ioread8(SCSPTR(sp));
+ setbits(sp, PIN_INIT, 1);
+
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (!ret)
+ return 0;
+
+ setbits(sp, PIN_INIT, 0);
+ iounmap(sp->membase);
+ err1:
+ spi_master_put(sp->bitbang.master);
+ err0:
+ return ret;
+}
+
+static int sh_sci_spi_remove(struct platform_device *dev)
+{
+ struct sh_sci_spi *sp = platform_get_drvdata(dev);
+
+ iounmap(sp->membase);
+ setbits(sp, PIN_INIT, 0);
+ spi_bitbang_stop(&sp->bitbang);
+ spi_master_put(sp->bitbang.master);
+ return 0;
+}
+
+static struct platform_driver sh_sci_spi_drv = {
+ .probe = sh_sci_spi_probe,
+ .remove = sh_sci_spi_remove,
+ .driver = {
+ .name = "spi_sh_sci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sh_sci_spi_init(void)
+{
+ return platform_driver_register(&sh_sci_spi_drv);
+}
+module_init(sh_sci_spi_init);
+
+static void __exit sh_sci_spi_exit(void)
+{
+ platform_driver_unregister(&sh_sci_spi_drv);
+}
+module_exit(sh_sci_spi_exit);
+
+MODULE_DESCRIPTION("SH SCI SPI Driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL");