summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2009-12-18 17:38:04 +0000
committerMike Frysinger <vapier@gentoo.org>2010-10-18 02:49:38 -0400
commit033f44bd0ebca1809e8274237a64263d909f01a7 (patch)
tree04ba3e37c926c07809e934b0adf39ec6310f7114 /drivers/spi
parent7370ed6b91c37d7022a89a820b0fcd3156fa87fc (diff)
spi/bfin_spi: push all size checks into the transfer function
This reduces duplication between the setup/transfer functions and keeps values cached during setup from overriding values changed on a transfer basis (like bits_per_word). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi_bfin5xx.c57
1 files changed, 14 insertions, 43 deletions
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index d446524aa89..830c7055f15 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -114,10 +114,7 @@ struct slave_data {
u16 flag;
u8 chip_select_num;
- u8 n_bytes;
- u8 width; /* 0 or 1 */
u8 enable_dma;
- u8 bits_per_word; /* 8 or 16 */
u16 cs_chg_udelay; /* Some devices require > 255usec delay */
u32 cs_gpio;
u16 idle_tx_val;
@@ -562,6 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
struct slave_data *chip = NULL;
+ unsigned int bits_per_word;
u8 width;
u16 cr, dma_width, dma_config;
u32 tranf_success = 1;
@@ -641,26 +639,15 @@ static void bfin_spi_pump_transfers(unsigned long data)
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- switch (transfer->bits_per_word) {
- case 8:
+ bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
+ if (bits_per_word == 8) {
drv_data->n_bytes = 1;
width = CFG_SPI_WORDSIZE8;
drv_data->ops = &bfin_transfer_ops_u8;
- break;
-
- case 16:
+ } else {
drv_data->n_bytes = 2;
width = CFG_SPI_WORDSIZE16;
drv_data->ops = &bfin_transfer_ops_u16;
- break;
-
- default:
- /* No change, the same as default setting */
- transfer->bits_per_word = chip->bits_per_word;
- drv_data->n_bytes = chip->n_bytes;
- width = chip->width;
- drv_data->ops = chip->ops;
- break;
}
cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
cr |= (width << 8);
@@ -811,9 +798,9 @@ static void bfin_spi_pump_transfers(unsigned long data)
if (drv_data->tx == NULL)
write_TDBR(drv_data, chip->idle_tx_val);
else {
- if (transfer->bits_per_word == 8)
+ if (bits_per_word == 8)
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
- else if (transfer->bits_per_word == 16)
+ else
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
drv_data->tx += drv_data->n_bytes;
}
@@ -987,9 +974,6 @@ static int bfin_spi_setup(struct spi_device *spi)
struct master_data *drv_data = spi_master_get_devdata(spi->master);
int ret = -EINVAL;
- if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
- goto error;
-
/* Only alloc (or use chip_info) on first setup */
chip_info = NULL;
chip = spi_get_ctldata(spi);
@@ -1023,10 +1007,16 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->enable_dma = chip_info->enable_dma != 0
&& drv_data->master_info->enable_dma;
chip->ctl_reg = chip_info->ctl_reg;
- chip->bits_per_word = chip_info->bits_per_word;
chip->cs_chg_udelay = chip_info->cs_chg_udelay;
chip->idle_tx_val = chip_info->idle_tx_val;
chip->pio_interrupt = chip_info->pio_interrupt;
+ spi->bits_per_word = chip_info->bits_per_word;
+ }
+
+ if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
+ dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+ spi->bits_per_word);
+ goto error;
}
/* translate common spi framework into our register */
@@ -1050,25 +1040,6 @@ static int bfin_spi_setup(struct spi_device *spi)
else
chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
- switch (chip->bits_per_word) {
- case 8:
- chip->n_bytes = 1;
- chip->width = CFG_SPI_WORDSIZE8;
- chip->ops = &bfin_transfer_ops_u8;
- break;
-
- case 16:
- chip->n_bytes = 2;
- chip->width = CFG_SPI_WORDSIZE16;
- chip->ops = &bfin_transfer_ops_u16;
- break;
-
- default:
- dev_err(&spi->dev, "%d bits_per_word is not supported\n",
- chip->bits_per_word);
- goto error;
- }
-
if (chip->enable_dma && chip->pio_interrupt) {
dev_err(&spi->dev, "enable_dma is set, "
"do not set pio_interrupt\n");
@@ -1119,7 +1090,7 @@ static int bfin_spi_setup(struct spi_device *spi)
}
dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",
- spi->modalias, chip->width, chip->enable_dma);
+ spi->modalias, spi->bits_per_word, chip->enable_dma);
dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
chip->ctl_reg, chip->flag);