summaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
authorSonic Zhang <sonic.zhang@analog.com>2007-12-04 23:45:21 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-12-05 09:21:20 -0800
commit07612e5f224613020c0ba17ce28e8eac052ef8ce (patch)
treea401cf425ee349496cf4bfa2015bad601aa6f730 /drivers/spi
parent62310e51ac10c5e50998240e49a84d2e28377a48 (diff)
spi: spi_bfin: resequence DMA start/stop
Set correct baud for spi mmc and enable SPI only after DMA is started. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi_bfin5xx.c30
1 files changed, 19 insertions, 11 deletions
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 4dc7e674932..a85bcb30659 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -231,13 +231,13 @@ static int restore_state(struct driver_data *drv_data)
dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
/* Load the registers */
- cs_deactive(drv_data, chip);
write_BAUD(drv_data, chip->baud);
chip->ctl_reg &= (~BIT_CTL_TIMOD);
chip->ctl_reg |= (chip->width << 8);
write_CTRL(drv_data, chip->ctl_reg);
bfin_spi_enable(drv_data);
+ cs_active(drv_data, chip);
if (ret)
dev_dbg(&drv_data->pdev->dev,
@@ -767,6 +767,7 @@ static void pump_transfers(unsigned long data)
disable_dma(drv_data->dma_channel);
clear_dma_irqstat(drv_data->dma_channel);
+ bfin_spi_disable(drv_data);
/* config dma channel */
dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
@@ -789,9 +790,6 @@ static void pump_transfers(unsigned long data)
dev_dbg(&drv_data->pdev->dev,
"doing autobuffer DMA out.\n");
- /* set SPI transfer mode */
- write_CTRL(drv_data, (cr | CFG_SPI_DMAWRITE));
-
/* no irq in autobuffer mode */
dma_config =
(DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
@@ -800,7 +798,13 @@ static void pump_transfers(unsigned long data)
(unsigned long)drv_data->tx);
enable_dma(drv_data->dma_channel);
- /* just return here, there can only be one transfer in this mode */
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
+
+ /* just return here, there can only be one transfer
+ * in this mode
+ */
message->status = 0;
giveback(drv_data);
return;
@@ -811,9 +815,6 @@ static void pump_transfers(unsigned long data)
/* set transfer mode, and enable SPI */
dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n");
- /* set SPI transfer mode */
- write_CTRL(drv_data, (cr | CFG_SPI_DMAREAD));
-
/* clear tx reg soformer data is not shifted out */
write_TDBR(drv_data, 0xFFFF);
@@ -827,12 +828,13 @@ static void pump_transfers(unsigned long data)
(unsigned long)drv_data->rx);
enable_dma(drv_data->dma_channel);
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAREAD | BIT_CTL_ENABLE));
+
} else if (drv_data->tx != NULL) {
dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
- /* set SPI transfer mode */
- write_CTRL(drv_data, (cr | CFG_SPI_DMAWRITE));
-
/* start dma */
dma_enable_irq(drv_data->dma_channel);
dma_config = (RESTART | dma_width | DI_EN);
@@ -840,6 +842,10 @@ static void pump_transfers(unsigned long data)
set_dma_start_addr(drv_data->dma_channel,
(unsigned long)drv_data->tx);
enable_dma(drv_data->dma_channel);
+
+ /* start SPI transfer */
+ write_CTRL(drv_data,
+ (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
}
} else {
/* IO mode write then read */
@@ -1142,6 +1148,8 @@ static int setup(struct spi_device *spi)
peripheral_request(ssel[spi->master->bus_num]
[chip->chip_select_num-1], DRV_NAME);
+ cs_deactive(drv_data, chip);
+
return 0;
}