Merge branch 'overlayfs-current' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-linus

"The biggest change is to rename the filesystem from "overlayfs" to "overlay".
This will allow legacy overlayfs to be easily carried by distros alongside the
new mainline one.  Also fix a couple of copy-up races and allow escaping comma
character in filenames."

The last bit is about commas in pathname mount options...

1 files changed, 29 insertions, 16 deletions

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 461bf3d033a..5a1f1070b70 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -459,6 +459,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	int measure_freq;
 	int ret;
 
+	if (!cpufreq_get_current_driver()) {
+		dev_dbg(&pdev->dev, "no cpufreq driver!");
+		return -EPROBE_DEFER;
+	}
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -521,6 +525,30 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->thermal_clk)) {
+		ret = PTR_ERR(data->thermal_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to get thermal clk: %d\n", ret);
+		cpufreq_cooling_unregister(data->cdev);
+		return ret;
+	}
+
+	/*
+	 * Thermal sensor needs clk on to get correct value, normally
+	 * we should enable its clk before taking measurement and disable
+	 * clk after measurement is done, but if alarm function is enabled,
+	 * hardware will auto measure the temperature periodically, so we
+	 * need to keep the clk always on for alarm function.
+	 */
+	ret = clk_prepare_enable(data->thermal_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+		cpufreq_cooling_unregister(data->cdev);
+		return ret;
+	}
+
 	data->tz = thermal_zone_device_register("imx_thermal_zone",
 						IMX_TRIP_NUM,
 						BIT(IMX_TRIP_PASSIVE), data,
@@ -531,26 +559,11 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		ret = PTR_ERR(data->tz);
 		dev_err(&pdev->dev,
 			"failed to register thermal zone device %d\n", ret);
+		clk_disable_unprepare(data->thermal_clk);
 		cpufreq_cooling_unregister(data->cdev);
 		return ret;
 	}
 
-	data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(data->thermal_clk)) {
-		dev_warn(&pdev->dev, "failed to get thermal clk!\n");
-	} else {
-		/*
-		 * Thermal sensor needs clk on to get correct value, normally
-		 * we should enable its clk before taking measurement and disable
-		 * clk after measurement is done, but if alarm function is enabled,
-		 * hardware will auto measure the temperature periodically, so we
-		 * need to keep the clk always on for alarm function.
-		 */
-		ret = clk_prepare_enable(data->thermal_clk);
-		if (ret)
-			dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
-	}
-
 	/* Enable measurements at ~ 10 Hz */
 	regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
 	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */