tty/8250_early: Turn serial_in/serial_out into weak symbols.

Allows overriding default methods serial_in/serial_out.

In such platform specific replacement it is possible to use
other regshift, biased register offset, any other manipulation
that is not covered with common default methods.

Overriding default methods may be useful for platforms which got
serial peripheral with registers represented in big endian.
In this situation and assuming that 32 bit operations / alignment
is required then it may be useful to swab words before/after
accessing the serial registers.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 21 insertions, 21 deletions

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 843a150ba10..f53a7db4350 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -48,7 +48,7 @@ struct early_serial8250_device {
 
 static struct early_serial8250_device early_device;
 
-static unsigned int __init serial_in(struct uart_port *port, int offset)
+unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
 	switch (port->iotype) {
 	case UPIO_MEM:
@@ -62,7 +62,7 @@ static unsigned int __init serial_in(struct uart_port *port, int offset)
 	}
 }
 
-static void __init serial_out(struct uart_port *port, int offset, int value)
+void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
 	switch (port->iotype) {
 	case UPIO_MEM:
@@ -84,7 +84,7 @@ static void __init wait_for_xmitr(struct uart_port *port)
 	unsigned int status;
 
 	for (;;) {
-		status = serial_in(port, UART_LSR);
+		status = serial8250_early_in(port, UART_LSR);
 		if ((status & BOTH_EMPTY) == BOTH_EMPTY)
 			return;
 		cpu_relax();
@@ -94,7 +94,7 @@ static void __init wait_for_xmitr(struct uart_port *port)
 static void __init serial_putc(struct uart_port *port, int c)
 {
 	wait_for_xmitr(port);
-	serial_out(port, UART_TX, c);
+	serial8250_early_out(port, UART_TX, c);
 }
 
 static void __init early_serial8250_write(struct console *console,
@@ -104,14 +104,14 @@ static void __init early_serial8250_write(struct console *console,
 	unsigned int ier;
 
 	/* Save the IER and disable interrupts */
-	ier = serial_in(port, UART_IER);
-	serial_out(port, UART_IER, 0);
+	ier = serial8250_early_in(port, UART_IER);
+	serial8250_early_out(port, UART_IER, 0);
 
 	uart_console_write(port, s, count, serial_putc);
 
 	/* Wait for transmitter to become empty and restore the IER */
 	wait_for_xmitr(port);
-	serial_out(port, UART_IER, ier);
+	serial8250_early_out(port, UART_IER, ier);
 }
 
 static unsigned int __init probe_baud(struct uart_port *port)
@@ -119,11 +119,11 @@ static unsigned int __init probe_baud(struct uart_port *port)
 	unsigned char lcr, dll, dlm;
 	unsigned int quot;
 
-	lcr = serial_in(port, UART_LCR);
-	serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
-	dll = serial_in(port, UART_DLL);
-	dlm = serial_in(port, UART_DLM);
-	serial_out(port, UART_LCR, lcr);
+	lcr = serial8250_early_in(port, UART_LCR);
+	serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+	dll = serial8250_early_in(port, UART_DLL);
+	dlm = serial8250_early_in(port, UART_DLM);
+	serial8250_early_out(port, UART_LCR, lcr);
 
 	quot = (dlm << 8) | dll;
 	return (port->uartclk / 16) / quot;
@@ -135,17 +135,17 @@ static void __init init_port(struct early_serial8250_device *device)
 	unsigned int divisor;
 	unsigned char c;
 
-	serial_out(port, UART_LCR, 0x3);	/* 8n1 */
-	serial_out(port, UART_IER, 0);		/* no interrupt */
-	serial_out(port, UART_FCR, 0);		/* no fifo */
-	serial_out(port, UART_MCR, 0x3);	/* DTR + RTS */
+	serial8250_early_out(port, UART_LCR, 0x3);	/* 8n1 */
+	serial8250_early_out(port, UART_IER, 0);	/* no interrupt */
+	serial8250_early_out(port, UART_FCR, 0);	/* no fifo */
+	serial8250_early_out(port, UART_MCR, 0x3);	/* DTR + RTS */
 
 	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
-	c = serial_in(port, UART_LCR);
-	serial_out(port, UART_LCR, c | UART_LCR_DLAB);
-	serial_out(port, UART_DLL, divisor & 0xff);
-	serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
-	serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
+	c = serial8250_early_in(port, UART_LCR);
+	serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
+	serial8250_early_out(port, UART_DLL, divisor & 0xff);
+	serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
 static int __init parse_options(struct early_serial8250_device *device,