Merge tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY updates from Greg Kroah-Hartman:
 "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
  window.

  Nothing major in here, just lots of incremental changes from Alan and
  Jiri reworking some tty core things to behave better and to get a more
  solid grasp on some of the nasty tty locking issues.

  There are a few tty and serial driver updates in here as well.

  All of this has been in the linux-next releases for a while with no
  problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
  serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
  serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
  serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
  serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
  Revert "serial_core: Update buffer overrun statistics."
  tty: hvc_xen: NULL dereference on allocation failure
  tty: Fix LED error return
  tty: Allow uart_register/unregister/register
  tty: move global ldisc idle waitqueue to the individual ldisc
  serial8250-em: Add DT support
  serial8250-em: clk_get() IS_ERR() error handling fix
  serial_core: Update buffer overrun statistics.
  tty: drop the pty lock during hangup
  cris: fix missing tty arg in wait_event_interruptible_tty call
  tty/amiserial: Add missing argument for tty_unlock()
  tty_lock: Localise the lock
  pty: Lock the devpts bits privately
  tty_lock: undo the old tty_lock use on the ctty
  serial8250-em: Emma Mobile UART driver V2
  Add missing call to uart_update_timeout()
  ...

1 files changed, 18 insertions, 91 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 062ef8c2b3c..4ad721fb840 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -68,30 +68,6 @@
 #define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
 #define UART_DUMMY_DR_RX	(1 << 16)
 
-
-#define UART_WA_SAVE_NR 14
-
-static void pl011_lockup_wa(unsigned long data);
-static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
-	ST_UART011_DMAWM,
-	ST_UART011_TIMEOUT,
-	ST_UART011_LCRH_RX,
-	UART011_IBRD,
-	UART011_FBRD,
-	ST_UART011_LCRH_TX,
-	UART011_IFLS,
-	ST_UART011_XFCR,
-	ST_UART011_XON1,
-	ST_UART011_XON2,
-	ST_UART011_XOFF1,
-	ST_UART011_XOFF2,
-	UART011_CR,
-	UART011_IMSC
-};
-
-static u32 uart_wa_regdata[UART_WA_SAVE_NR];
-static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
-
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
 	unsigned int		ifls;
@@ -101,6 +77,7 @@ struct vendor_data {
 	bool			oversampling;
 	bool			interrupt_may_hang;   /* vendor-specific */
 	bool			dma_threshold;
+	bool			cts_event_workaround;
 };
 
 static struct vendor_data vendor_arm = {
@@ -110,6 +87,7 @@ static struct vendor_data vendor_arm = {
 	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
 	.dma_threshold		= false,
+	.cts_event_workaround	= false,
 };
 
 static struct vendor_data vendor_st = {
@@ -120,6 +98,7 @@ static struct vendor_data vendor_st = {
 	.oversampling		= true,
 	.interrupt_may_hang	= true,
 	.dma_threshold		= true,
+	.cts_event_workaround	= true,
 };
 
 static struct uart_amba_port *amba_ports[UART_NR];
@@ -1055,69 +1034,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 #define pl011_dma_flush_buffer	NULL
 #endif
 
-
-/*
- * pl011_lockup_wa
- * This workaround aims to break the deadlock situation
- * when after long transfer over uart in hardware flow
- * control, uart interrupt registers cannot be cleared.
- * Hence uart transfer gets blocked.
- *
- * It is seen that during such deadlock condition ICR
- * don't get cleared even on multiple write. This leads
- * pass_counter to decrease and finally reach zero. This
- * can be taken as trigger point to run this UART_BT_WA.
- *
- */
-static void pl011_lockup_wa(unsigned long data)
-{
-	struct uart_amba_port *uap = amba_ports[0];
-	void __iomem *base = uap->port.membase;
-	struct circ_buf *xmit = &uap->port.state->xmit;
-	struct tty_struct *tty = uap->port.state->port.tty;
-	int buf_empty_retries = 200;
-	int loop;
-
-	/* Stop HCI layer from submitting data for tx */
-	tty->hw_stopped = 1;
-	while (!uart_circ_empty(xmit)) {
-		if (buf_empty_retries-- == 0)
-			break;
-		udelay(100);
-	}
-
-	/* Backup registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
-
-	/* Disable UART so that FIFO data is flushed out */
-	writew(0x00, uap->port.membase + UART011_CR);
-
-	/* Soft reset UART module */
-	if (uap->port.dev->platform_data) {
-		struct amba_pl011_data *plat;
-
-		plat = uap->port.dev->platform_data;
-		if (plat->reset)
-			plat->reset();
-	}
-
-	/* Restore registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		writew(uart_wa_regdata[loop] ,
-				uap->port.membase + uart_wa_reg[loop]);
-
-	/* Initialise the old status of the modem signals */
-	uap->old_status = readw(uap->port.membase + UART01x_FR) &
-		UART01x_FR_MODEM_ANY;
-
-	if (readl(base + UART011_MIS) & 0x2)
-		printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
-
-	/* Start Tx/Rx */
-	tty->hw_stopped = 0;
-}
-
 static void pl011_stop_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1246,12 +1162,26 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
 	int handled = 0;
+	unsigned int dummy_read;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
 	status = readw(uap->port.membase + UART011_MIS);
 	if (status) {
 		do {
+			if (uap->vendor->cts_event_workaround) {
+				/* workaround to make sure that all bits are unlocked.. */
+				writew(0x00, uap->port.membase + UART011_ICR);
+
+				/*
+				 * WA: introduce 26ns(1 uart clk) delay before W1C;
+				 * single apb access will incur 2 pclk(133.12Mhz) delay,
+				 * so add 2 dummy reads
+				 */
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+			}
+
 			writew(status & ~(UART011_TXIS|UART011_RTIS|
 					  UART011_RXIS),
 			       uap->port.membase + UART011_ICR);
@@ -1268,11 +1198,8 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (status & UART011_TXIS)
 				pl011_tx_chars(uap);
 
-			if (pass_counter-- == 0) {
-				if (uap->interrupt_may_hang)
-					tasklet_schedule(&pl011_lockup_tlet);
+			if (pass_counter-- == 0)
 				break;
-			}
 
 			status = readw(uap->port.membase + UART011_MIS);
 		} while (status != 0);