diff options
author | Greg Kroah-Hartman <gregkh@suse.de> | 2011-01-13 12:10:18 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-01-13 12:10:18 -0800 |
commit | ab4382d27412e7e3e7c936e8d50d8888dfac3df8 (patch) | |
tree | 51d96dea2431140358784b6b426715f37f74fd53 /drivers/tty/serial/mpsc.c | |
parent | 728674a7e466628df2aeec6d11a2ae1ef968fb67 (diff) |
tty: move drivers/serial/ to drivers/tty/serial/
The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.
This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/tty/serial/mpsc.c')
-rw-r--r-- | drivers/tty/serial/mpsc.c | 2159 |
1 files changed, 2159 insertions, 0 deletions
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c new file mode 100644 index 00000000000..6a9c6605666 --- /dev/null +++ b/drivers/tty/serial/mpsc.c @@ -0,0 +1,2159 @@ +/* + * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, + * GT64260, MV64340, MV64360, GT96100, ... ). + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * Based on an old MPSC driver that was in the linuxppc tree. It appears to + * have been created by Chris Zankel (formerly of MontaVista) but there + * is no proper Copyright so I'm not sure. Apparently, parts were also + * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c + * by Russell King. + * + * 2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * The MPSC interface is much like a typical network controller's interface. + * That is, you set up separate rings of descriptors for transmitting and + * receiving data. There is also a pool of buffers with (one buffer per + * descriptor) that incoming data are dma'd into or outgoing data are dma'd + * out of. + * + * The MPSC requires two other controllers to be able to work. The Baud Rate + * Generator (BRG) provides a clock at programmable frequencies which determines + * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the + * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the + * MPSC. It is actually the SDMA interrupt that the driver uses to keep the + * transmit and receive "engines" going (i.e., indicate data has been + * transmitted or received). + * + * NOTES: + * + * 1) Some chips have an erratum where several regs cannot be + * read. To work around that, we keep a local copy of those regs in + * 'mpsc_port_info'. + * + * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr + * accesses system mem with coherency enabled. For that reason, the driver + * assumes that coherency for that ctlr has been disabled. This means + * that when in a cache coherent system, the driver has to manually manage + * the data cache on the areas that it touches because the dma_* macro are + * basically no-ops. + * + * 3) There is an erratum (on PPC) where you can't use the instruction to do + * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places + * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. + * + * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. + */ + + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mv643xx.h> +#include <linux/platform_device.h> +#include <linux/gfp.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \ + + MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void __iomem *mpsc_routing_base; + void __iomem *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void __iomem *mpsc_base; + void __iomem *sdma_base; + void __iomem *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + spinlock_t tx_lock; /* transmit lock */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* Main MPSC Configuration Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* Serial DMA Controller Interface Registers */ +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \ + | SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \ + | SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \ + | SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* Baud Rate Generator Interface Registers */ +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 + +/* + * Define how this driver is known to the outside (we've been assigned a + * range on the "Low-density serial ports" major). + */ +#define MPSC_MAJOR 204 +#define MPSC_MINOR_START 44 +#define MPSC_DRIVER_NAME "MPSC" +#define MPSC_DEV_NAME "ttyMM" +#define MPSC_VERSION "1.00" + +static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; +static struct mpsc_shared_regs mpsc_shared_regs; +static struct uart_driver mpsc_reg; + +static void mpsc_start_rx(struct mpsc_port_info *pi); +static void mpsc_free_ring_mem(struct mpsc_port_info *pi); +static void mpsc_release_port(struct uart_port *port); +/* + ****************************************************************************** + * + * Baud Rate Generator Routines (BRG) + * + ****************************************************************************** + */ +static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); + + if (pi->brg_can_tune) + v &= ~(1 << 25); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + + writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, + pi->brg_base + BRG_BTR); +} + +static void mpsc_brg_enable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v |= (1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +static void mpsc_brg_disable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v &= ~(1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +/* + * To set the baud, we adjust the CDV field in the BRG_BCR reg. + * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. + * However, the input clock is divided by 16 in the MPSC b/c of how + * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our + * calculation by 16 to account for that. So the real calculation + * that accounts for the way the mpsc is set up is: + * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. + */ +static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) +{ + u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; + u32 v; + + mpsc_brg_disable(pi); + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & 0xffff0000) | (cdv & 0xffff); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + mpsc_brg_enable(pi); +} + +/* + ****************************************************************************** + * + * Serial DMA Routines (SDMA) + * + ****************************************************************************** + */ + +static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) +{ + u32 v; + + pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", + pi->port.line, burst_size); + + burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ + + if (burst_size < 2) + v = 0x0; /* 1 64-bit word */ + else if (burst_size < 4) + v = 0x1; /* 2 64-bit words */ + else if (burst_size < 8) + v = 0x2; /* 4 64-bit words */ + else + v = 0x3; /* 8 64-bit words */ + + writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), + pi->sdma_base + SDMA_SDC); +} + +static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) +{ + pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, + burst_size); + + writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, + pi->sdma_base + SDMA_SDC); + mpsc_sdma_burstsize(pi, burst_size); +} + +static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) +{ + u32 old, v; + + pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); + + old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : + readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v &= ~mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + if (pi->port.line) + old >>= 8; + return old & 0xf; +} + +static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) +{ + u32 v; + + pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); + + v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m + : readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v |= mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); +} + +static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_CAUSE_m = 0; + writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE + + pi->port.line); +} + +static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, + struct mpsc_rx_desc *rxre_p) +{ + pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", + pi->port.line, (u32)rxre_p); + + writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); +} + +static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, + struct mpsc_tx_desc *txre_p) +{ + writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); + writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); +} + +static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) +{ + u32 v; + + v = readl(pi->sdma_base + SDMA_SDCM); + if (val) + v |= val; + else + v = 0; + wmb(); + writel(v, pi->sdma_base + SDMA_SDCM); + wmb(); +} + +static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi) +{ + return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; +} + +static void mpsc_sdma_start_tx(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre, *txre_p; + + /* If tx isn't running & there's a desc ready to go, start it */ + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { + txre_p = (struct mpsc_tx_desc *) + (pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE)); + + mpsc_sdma_set_tx_ring(pi, txre_p); + mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); + } + } +} + +static void mpsc_sdma_stop(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); + + /* Abort any SDMA transfers */ + mpsc_sdma_cmd(pi, 0); + mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); + + /* Clear the SDMA current and first TX and RX pointers */ + mpsc_sdma_set_tx_ring(pi, NULL); + mpsc_sdma_set_rx_ring(pi, NULL); + + /* Disable interrupts */ + mpsc_sdma_intr_mask(pi, 0xf); + mpsc_sdma_intr_ack(pi); +} + +/* + ****************************************************************************** + * + * Multi-Protocol Serial Controller Routines (MPSC) + * + ****************************************************************************** + */ + +static void mpsc_hw_init(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); + + /* Set up clock routing */ + if (pi->mirror_regs) { + v = pi->shared_regs->MPSC_MRR_m; + v &= ~0x1c7; + pi->shared_regs->MPSC_MRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = pi->shared_regs->MPSC_RCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_RCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = pi->shared_regs->MPSC_TCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_TCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } else { + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); + v &= ~0x1c7; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } + + /* Put MPSC in UART mode & enabel Tx/Rx egines */ + writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); + + /* No preamble, 16x divider, low-latency, */ + writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + mpsc_set_baudrate(pi, pi->default_baud); + + if (pi->mirror_regs) { + pi->MPSC_CHR_1_m = 0; + pi->MPSC_CHR_2_m = 0; + } + writel(0, pi->mpsc_base + MPSC_CHR_1); + writel(0, pi->mpsc_base + MPSC_CHR_2); + writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); + writel(0, pi->mpsc_base + MPSC_CHR_4); + writel(0, pi->mpsc_base + MPSC_CHR_5); + writel(0, pi->mpsc_base + MPSC_CHR_6); + writel(0, pi->mpsc_base + MPSC_CHR_7); + writel(0, pi->mpsc_base + MPSC_CHR_8); + writel(0, pi->mpsc_base + MPSC_CHR_9); + writel(0, pi->mpsc_base + MPSC_CHR_10); +} + +static void mpsc_enter_hunt(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) + udelay(10); + } +} + +static void mpsc_freeze(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v |= MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_unfreeze(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v &= ~MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + + pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); +} + +static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", + pi->port.line, len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + + v = (v & ~(1 << 14)) | ((len & 0x1) << 14); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p) +{ + u32 v; + + pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); + + v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : + readl(pi->mpsc_base + MPSC_CHR_2); + + p &= 0x3; + v = (v & ~0xc000c) | (p << 18) | (p << 2); + + if (pi->mirror_regs) + pi->MPSC_CHR_2_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_2); +} + +/* + ****************************************************************************** + * + * Driver Init Routines + * + ****************************************************************************** + */ + +static void mpsc_init_hw(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); + + mpsc_brg_init(pi, pi->brg_clk_src); + mpsc_brg_enable(pi); + mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ + mpsc_sdma_stop(pi); + mpsc_hw_init(pi); +} + +static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) +{ + int rc = 0; + + pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", + pi->port.line); + + if (!pi->dma_region) { + if (!dma_supported(pi->port.dev, 0xffffffff)) { + printk(KERN_ERR "MPSC: Inadequate DMA support\n"); + rc = -ENXIO; + } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + MPSC_DMA_ALLOC_SIZE, + &pi->dma_region_p, GFP_KERNEL)) + == NULL) { + printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); + rc = -ENOMEM; + } + } + + return rc; +} + +static void mpsc_free_ring_mem(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); + + if (pi->dma_region) { + dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p); + pi->dma_region = NULL; + pi->dma_region_p = (dma_addr_t)NULL; + } +} + +static void mpsc_init_rings(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct mpsc_tx_desc *txre; + dma_addr_t dp, dp_p; + u8 *bp, *bp_p; + int i; + + pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); + + /* + * Descriptors & buffers are multiples of cacheline size and must be + * cacheline aligned. + */ + dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment()); + dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment()); + + /* + * Partition dma region into rx ring descriptor, rx buffers, + * tx ring descriptors, and tx buffers. + */ + pi->rxr = dp; + pi->rxr_p = dp_p; + dp += MPSC_RXR_SIZE; + dp_p += MPSC_RXR_SIZE; + + pi->rxb = (u8 *)dp; + pi->rxb_p = (u8 *)dp_p; + dp += MPSC_RXB_SIZE; + dp_p += MPSC_RXB_SIZE; + + pi->rxr_posn = 0; + + pi->txr = dp; + pi->txr_p = dp_p; + dp += MPSC_TXR_SIZE; + dp_p += MPSC_TXR_SIZE; + + pi->txb = (u8 *)dp; + pi->txb_p = (u8 *)dp_p; + + pi->txr_head = 0; + pi->txr_tail = 0; + + /* Init rx ring descriptors */ + dp = pi->rxr; + dp_p = pi->rxr_p; + bp = pi->rxb; + bp_p = pi->rxb_p; + + for (i = 0; i < MPSC_RXR_ENTRIES; i++) { + rxre = (struct mpsc_rx_desc *)dp; + + rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); + rxre->bytecnt = cpu_to_be16(0); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); + rxre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_RXRE_SIZE; + dp_p += MPSC_RXRE_SIZE; + bp += MPSC_RXBE_SIZE; + bp_p += MPSC_RXBE_SIZE; + } + rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ + + /* Init tx ring descriptors */ + dp = pi->txr; + dp_p = pi->txr_p; + bp = pi->txb; + bp_p = pi->txb_p; + + for (i = 0; i < MPSC_TXR_ENTRIES; i++) { + txre = (struct mpsc_tx_desc *)dp; + + txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); + txre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_TXRE_SIZE; + dp_p += MPSC_TXRE_SIZE; + bp += MPSC_TXBE_SIZE; + bp_p += MPSC_TXBE_SIZE; + } + txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ + + dma_cache_sync(pi->port.dev, (void *)pi->dma_region, + MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)pi->dma_region, + (ulong)pi->dma_region + + MPSC_DMA_ALLOC_SIZE); +#endif + + return; +} + +static void mpsc_uninit_rings(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + pi->rxr = 0; + pi->rxr_p = 0; + pi->rxb = NULL; + pi->rxb_p = NULL; + pi->rxr_posn = 0; + + pi->txr = 0; + pi->txr_p = 0; + pi->txb = NULL; + pi->txb_p = NULL; + pi->txr_head = 0; + pi->txr_tail = 0; +} + +static int mpsc_make_ready(struct mpsc_port_info *pi) +{ + int rc; + + pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); + + if (!pi->ready) { + mpsc_init_hw(pi); + if ((rc = mpsc_alloc_ring_mem(pi))) + return rc; + mpsc_init_rings(pi); + pi->ready = 1; + } + + return 0; +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + ****************************************************************************** + * + * Interrupt Handling Routines + * + ****************************************************************************** + */ + +static int mpsc_rx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct tty_struct *tty = pi->port.state->port.tty; + u32 cmdstat, bytes_in, i; + int rc = 0; + u8 *bp; + char flag = TTY_NORMAL; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* + * Loop through Rx descriptors handling ones that have been completed. + */ + while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) + & SDMA_DESC_CMDSTAT_O)) { + bytes_in = be16_to_cpu(rxre->bytecnt); +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + /* Following use of tty struct directly is deprecated */ + if (unlikely(tty_buffer_request_room(tty, bytes_in) + < bytes_in)) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the bytes + * but must do so to clear interrupts. + */ + } + + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + + /* + * Other than for parity error, the manual provides little + * info on what data will be in a frame flagged by any of + * these errors. For parity error, it is the last byte in + * the buffer that had the error. As for the rest, I guess + * we'll assume there is no data in the buffer. + * If there is...it gets lost. + */ + if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) { + + pi->port.icount.rx++; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ + pi->port.icount.brk++; + + if (uart_handle_break(&pi->port)) + goto next_frame; + } else if (cmdstat & SDMA_DESC_CMDSTAT_FR) { + pi->port.icount.frame++; + } else if (cmdstat & SDMA_DESC_CMDSTAT_OR) { + pi->port.icount.overrun++; + } + + cmdstat &= pi->port.read_status_mask; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) + flag = TTY_BREAK; + else if (cmdstat & SDMA_DESC_CMDSTAT_FR) + flag = TTY_FRAME; + else if (cmdstat & SDMA_DESC_CMDSTAT_OR) + flag = TTY_OVERRUN; + else if (cmdstat & SDMA_DESC_CMDSTAT_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(&pi->port, *bp)) { + bp++; + bytes_in--; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + goto next_frame; + } + + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) + && !(cmdstat & pi->port.ignore_status_mask)) { + tty_insert_flip_char(tty, *bp, flag); + } else { + for (i=0; i<bytes_in; i++) + tty_insert_flip_char(tty, *bp++, TTY_NORMAL); + + pi->port.icount.rx += bytes_in; + } + +next_frame: + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *) + (pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + rc = 1; + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + + tty_flip_buffer_push(tty); + return rc; +} + +static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) +{ + struct mpsc_tx_desc *txre; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_head * MPSC_TXRE_SIZE)); + + txre->bytecnt = cpu_to_be16(count); + txre->shadow = txre->bytecnt; + wmb(); /* ensure cmdstat is last field updated */ + txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L + | ((intr) ? SDMA_DESC_CMDSTAT_EI : 0)); + wmb(); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif +} + +static void mpsc_copy_tx_data(struct mpsc_port_info *pi) +{ + struct circ_buf *xmit = &pi->port.state->xmit; + u8 *bp; + u32 i; + + /* Make sure the desc ring isn't full */ + while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) + < (MPSC_TXR_ENTRIES - 1)) { + if (pi->port.x_char) { + /* + * Ideally, we should use the TCS field in + * CHR_1 to put the x_char out immediately but + * errata prevents us from being able to read + * CHR_2 to know that its safe to write to + * CHR_1. Instead, just put it in-band with + * all the other Tx data. + */ + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + *bp = pi->port.x_char; + pi->port.x_char = 0; + i = 1; + } else if (!uart_circ_empty(xmit) + && !uart_tx_stopped(&pi->port)) { + i = min((u32)MPSC_TXBE_SIZE, + (u32)uart_circ_chars_pending(xmit)); + i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE)); + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + memcpy(bp, &xmit->buf[xmit->tail], i); + xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&pi->port); + } else { /* All tx data copied into ring bufs */ + return; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 1); + + /* Advance to next descriptor */ + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + } +} + +static int mpsc_tx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre; + int rc = 0; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { + rc = 1; + pi->port.icount.tx += be16_to_cpu(txre->bytecnt); + pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); + + /* If no more data to tx, fall out of loop */ + if (pi->txr_head == pi->txr_tail) + break; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, + MPSC_TXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + } + + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); /* start next desc if ready */ + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + return rc; +} + +/* + * This is the driver's interrupt handler. To avoid a race, we first clear + * the interrupt, then handle any completed Rx/Tx descriptors. When done + * handling those descriptors, we restart the Rx/Tx engines if they're stopped. + */ +static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) +{ + struct mpsc_port_info *pi = dev_id; + ulong iflags; + int rc = IRQ_NONE; + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); + + spin_lock_irqsave(&pi->port.lock, iflags); + mpsc_sdma_intr_ack(pi); + if (mpsc_rx_intr(pi)) + rc = IRQ_HANDLED; + if (mpsc_tx_intr(pi)) + rc = IRQ_HANDLED; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); + return rc; +} + +/* + ****************************************************************************** + * + * serial_core.c Interface routines + * + ****************************************************************************** + */ +static uint mpsc_tx_empty(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong iflags; + uint rc; + + spin_lock_irqsave(&pi->port.lock, iflags); + rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + return rc; +} + +static void mpsc_set_mctrl(struct uart_port *port, uint mctrl) +{ + /* Have no way to set modem control lines AFAICT */ +} + +static uint mpsc_get_mctrl(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 mflags, status; + + status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m + : readl(pi->mpsc_base + MPSC_CHR_10); + + mflags = 0; + if (status & 0x1) + mflags |= TIOCM_CTS; + if (status & 0x2) + mflags |= TIOCM_CAR; + + return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ +} + +static void mpsc_stop_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_tx[%d]\n", port->line); + + mpsc_freeze(pi); +} + +static void mpsc_start_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + mpsc_unfreeze(pi); + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + + pr_debug("mpsc_start_tx[%d]\n", port->line); +} + +static void mpsc_start_rx(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); + + if (pi->rcv_data) { + mpsc_enter_hunt(pi); + mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); + } +} + +static void mpsc_stop_rx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA) + udelay(10); + } + + mpsc_sdma_cmd(pi, SDMA_SDCM_AR); +} + +static void mpsc_enable_ms(struct uart_port *port) +{ +} + +static void mpsc_break_ctl(struct uart_port *port, int ctl) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong flags; + u32 v; + + v = ctl ? 0x00ff0000 : 0; + + spin_lock_irqsave(&pi->port.lock, flags); + if (pi->mirror_regs) + pi->MPSC_CHR_1_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_1); + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static int mpsc_startup(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 flag = 0; + int rc; + + pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", + port->line, pi->port.irq); + + if ((rc = mpsc_make_ready(pi)) == 0) { + /* Setup IRQ handler */ + mpsc_sdma_intr_ack(pi); + + /* If irq's are shared, need to set flag */ + if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) + flag = IRQF_SHARED; + + if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, + "mpsc-sdma", pi)) + printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", + pi->port.irq); + + mpsc_sdma_intr_unmask(pi, 0xf); + mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p + + (pi->rxr_posn * MPSC_RXRE_SIZE))); + } + + return rc; +} + +static void mpsc_shutdown(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); + + mpsc_sdma_stop(pi); + free_irq(pi->port.irq, pi); +} + +static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 baud; + ulong flags; + u32 chr_bits, stop_bits, par; + + pi->c_iflag = termios->c_iflag; + pi->c_cflag = termios->c_cflag; + + switch (termios->c_cflag & CSIZE) { + case CS5: + chr_bits = MPSC_MPCR_CL_5; + break; + case CS6: + chr_bits = MPSC_MPCR_CL_6; + break; + case CS7: + chr_bits = MPSC_MPCR_CL_7; + break; + case CS8: + default: + chr_bits = MPSC_MPCR_CL_8; + break; + } + + if (termios->c_cflag & CSTOPB) + stop_bits = MPSC_MPCR_SBL_2; + else + stop_bits = MPSC_MPCR_SBL_1; + + par = MPSC_CHR_2_PAR_EVEN; + if (termios->c_cflag & PARENB) + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_ODD; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_MARK; + else + par = MPSC_CHR_2_PAR_SPACE; + } +#endif + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + + spin_lock_irqsave(&pi->port.lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + mpsc_set_char_length(pi, chr_bits); + mpsc_set_stop_bit_length(pi, stop_bits); + mpsc_set_parity(pi, par); + mpsc_set_baudrate(pi, baud); + + /* Characters/events to read */ + pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; + + if (termios->c_iflag & INPCK) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & (BRKINT | PARMRK)) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; + + /* Characters/events to ignore */ + pi->port.ignore_status_mask = 0; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & IGNBRK) { + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; + } + + if ((termios->c_cflag & CREAD)) { + if (!pi->rcv_data) { + pi->rcv_data = 1; + mpsc_start_rx(pi); + } + } else if (pi->rcv_data) { + mpsc_stop_rx(port); + pi->rcv_data = 0; + } + + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static const char *mpsc_type(struct uart_port *port) +{ + pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); + return MPSC_DRIVER_NAME; +} + +static int mpsc_request_port(struct uart_port *port) +{ + /* Should make chip/platform specific call */ + return 0; +} + +static void mpsc_release_port(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + if (pi->ready) { + mpsc_uninit_rings(pi); + mpsc_free_ring_mem(pi); + pi->ready = 0; + } +} + +static void mpsc_config_port(struct uart_port *port, int flags) +{ +} + +static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + int rc = 0; + + pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) + rc = -EINVAL; + else if (pi->port.irq != ser->irq) + rc = -EINVAL; + else if (ser->io_type != SERIAL_IO_MEM) + rc = -EINVAL; + else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ + rc = -EINVAL; + else if ((void *)pi->port.mapbase != ser->iomem_base) + rc = -EINVAL; + else if (pi->port.iobase != ser->port) + rc = -EINVAL; + else if (ser->hub6 != 0) + rc = -EINVAL; + + return rc; +} +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static char poll_buf[2048]; +static int poll_ptr; +static int poll_cnt; +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c); + +static int mpsc_get_poll_char(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + struct mpsc_rx_desc *rxre; + u32 cmdstat, bytes_in, i; + u8 *bp; + + if (!serial_polled) + serial_polled = 1; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + poll_ptr = 0; + poll_cnt = 0; + + while (poll_cnt == 0) { + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn*MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + /* + * Loop through Rx descriptors handling ones that have + * been completed. + */ + while (poll_cnt == 0 && + !((cmdstat = be32_to_cpu(rxre->cmdstat)) & + SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *) bp, + MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) { + poll_buf[poll_cnt] = *bp; + poll_cnt++; + } else { + for (i = 0; i < bytes_in; i++) { + poll_buf[poll_cnt] = *bp++; + poll_cnt++; + } + pi->port.icount.rx += bytes_in; + } + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & + (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + } + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + + return 0; +} + + +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 data; + + data = readl(pi->mpsc_base + MPSC_MPCR); + writeb(c, pi->mpsc_base + MPSC_CHR_1); + mb(); + data = readl(pi->mpsc_base + MPSC_CHR_2); + data |= MPSC_CHR_2_TTCS; + writel(data, pi->mpsc_base + MPSC_CHR_2); + mb(); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); +} +#endif + +static struct uart_ops mpsc_pops = { + .tx_empty = mpsc_tx_empty, + .set_mctrl = mpsc_set_mctrl, + .get_mctrl = mpsc_get_mctrl, + .stop_tx = mpsc_stop_tx, + .start_tx = mpsc_start_tx, + .stop_rx = mpsc_stop_rx, + .enable_ms = mpsc_enable_ms, + .break_ctl = mpsc_break_ctl, + .startup = mpsc_startup, + .shutdown = mpsc_shutdown, + .set_termios = mpsc_set_termios, + .type = mpsc_type, + .release_port = mpsc_release_port, + .request_port = mpsc_request_port, + .config_port = mpsc_config_port, + .verify_port = mpsc_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mpsc_get_poll_char, + .poll_put_char = mpsc_put_poll_char, +#endif +}; + +/* + ****************************************************************************** + * + * Console Interface Routines + * + ****************************************************************************** + */ + +#ifdef CONFIG_SERIAL_MPSC_CONSOLE +static void mpsc_console_write(struct console *co, const char *s, uint count) +{ + struct mpsc_port_info *pi = &mpsc_ports[co->index]; + u8 *bp, *dp, add_cr = 0; + int i; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + while (pi->txr_head != pi->txr_tail) { + while (mpsc_sdma_tx_active(pi)) + udelay(100); + mpsc_sdma_intr_ack(pi); + mpsc_tx_intr(pi); + } + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + while (count > 0) { + bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + + for (i = 0; i < MPSC_TXBE_SIZE; i++) { + if (count == 0) + break; + + if (add_cr) { + *(dp++) = '\r'; + add_cr = 0; + } else { + *(dp++) = *s; + + if (*(s++) == '\n') { /* add '\r' after '\n' */ + add_cr = 1; + count++; + } + } + + count--; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 0); + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + mpsc_sdma_start_tx(pi); + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); +} + +static int __init mpsc_console_setup(struct console *co, char *options) +{ + struct mpsc_port_info *pi; + int baud, bits, parity, flow; + + pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); + + if (co->index >= MPSC_NUM_CTLRS) + co->index = 0; + + pi = &mpsc_ports[co->index]; + + baud = pi->default_baud; + bits = pi->default_bits; + parity = pi->default_parity; + flow = pi->default_flow; + + if (!pi->port.ops) + return -ENODEV; + + spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&pi->port, co, baud, parity, bits, flow); +} + +static struct console mpsc_console = { + .name = MPSC_DEV_NAME, + .write = mpsc_console_write, + .device = uart_console_device, + .setup = mpsc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mpsc_reg, +}; + +static int __init mpsc_late_console_init(void) +{ + pr_debug("mpsc_late_console_init: Enter\n"); + + if (!(mpsc_console.flags & CON_ENABLED)) + register_console(&mpsc_console); + return 0; +} + +late_initcall(mpsc_late_console_init); + +#define MPSC_CONSOLE &mpsc_console +#else +#define MPSC_CONSOLE NULL +#endif +/* + ****************************************************************************** + * + * Dummy Platform Driver to extract & map shared register regions + * + ****************************************************************************** + */ +static void mpsc_resource_err(char *s) +{ + printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); +} + +static int mpsc_shared_map_regs(struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_ROUTING_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE, + "mpsc_routing_regs")) { + mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_shared_regs.mpsc_routing_base_p = r->start; + } else { + mpsc_resource_err("MPSC routing base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_INTR_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE, + "sdma_intr_regs")) { + mpsc_shared_regs.sdma_intr_base = ioremap(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + mpsc_shared_regs.sdma_intr_base_p = r->start; + } else { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_resource_err("SDMA intr base"); + return -ENOMEM; + } + + return 0; +} + +static void mpsc_shared_unmap_regs(void) +{ + if (!mpsc_shared_regs.mpsc_routing_base) { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + } + if (!mpsc_shared_regs.sdma_intr_base) { + iounmap(mpsc_shared_regs.sdma_intr_base); + release_mem_region(mpsc_shared_regs.sdma_intr_base_p, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + } + + mpsc_shared_regs.mpsc_routing_base = NULL; + mpsc_shared_regs.sdma_intr_base = NULL; + + mpsc_shared_regs.mpsc_routing_base_p = 0; + mpsc_shared_regs.sdma_intr_base_p = 0; +} + +static int mpsc_shared_drv_probe(struct platform_device *dev) +{ + struct mpsc_shared_pdata *pdata; + int rc = -ENODEV; + + if (dev->id == 0) { + if (!(rc = mpsc_shared_map_regs(dev))) { + pdata = (struct mpsc_shared_pdata *) + dev->dev.platform_data; + + mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; + mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; + mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = + pdata->intr_cause_val; + mpsc_shared_regs.SDMA_INTR_MASK_m = + pdata->intr_mask_val; + + rc = 0; + } + } + + return rc; +} + +static int mpsc_shared_drv_remove(struct platform_device *dev) +{ + int rc = -ENODEV; + + if (dev->id == 0) { + mpsc_shared_unmap_regs(); + mpsc_shared_regs.MPSC_MRR_m = 0; + mpsc_shared_regs.MPSC_RCRR_m = 0; + mpsc_shared_regs.MPSC_TCRR_m = 0; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; + mpsc_shared_regs.SDMA_INTR_MASK_m = 0; + rc = 0; + } + + return rc; +} + +static struct platform_driver mpsc_shared_driver = { + .probe = mpsc_shared_drv_probe, + .remove = mpsc_shared_drv_remove, + .driver = { + .name = MPSC_SHARED_NAME, + }, +}; + +/* + ****************************************************************************** + * + * Driver Interface Routines + * + ****************************************************************************** + */ +static struct uart_driver mpsc_reg = { + .owner = THIS_MODULE, + .driver_name = MPSC_DRIVER_NAME, + .dev_name = MPSC_DEV_NAME, + .major = MPSC_MAJOR, + .minor = MPSC_MINOR_START, + .nr = MPSC_NUM_CTLRS, + .cons = MPSC_CONSOLE, +}; + +static int mpsc_drv_map_regs(struct mpsc_port_info *pi, + struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) + && request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, + "mpsc_regs")) { + pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); + pi->mpsc_base_p = r->start; + } else { + mpsc_resource_err("MPSC base"); + goto err; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { + pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); + pi->sdma_base_p = r->start; + } else { + mpsc_resource_err("SDMA base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + goto err; + } + + if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) { + pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); + pi->brg_base_p = r->start; + } else { + mpsc_resource_err("BRG base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + if (pi->sdma_base) { + iounmap(pi->sdma_base); + pi->sdma_base = NULL; + } + goto err; + } + return 0; + +err: + return -ENOMEM; +} + +static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi) +{ + if (!pi->mpsc_base) { + iounmap(pi->mpsc_base); + release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); + } + if (!pi->sdma_base) { + iounmap(pi->sdma_base); + release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); + } + if (!pi->brg_base) { + iounmap(pi->brg_base); + release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); + } + + pi->mpsc_base = NULL; + pi->sdma_base = NULL; + pi->brg_base = NULL; + + pi->mpsc_base_p = 0; + pi->sdma_base_p = 0; + pi->brg_base_p = 0; +} + +static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, + struct platform_device *pd, int num) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pd->dev.platform_data; + + pi->port.uartclk = pdata->brg_clk_freq; + pi->port.iotype = UPIO_MEM; + pi->port.line = num; + pi->port.type = PORT_MPSC; + pi->port.fifosize = MPSC_TXBE_SIZE; + pi->port.membase = pi->mpsc_base; + pi->port.mapbase = (ulong)pi->mpsc_base; + pi->port.ops = &mpsc_pops; + + pi->mirror_regs = pdata->mirror_regs; + pi->cache_mgmt = pdata->cache_mgmt; + pi->brg_can_tune = pdata->brg_can_tune; + pi->brg_clk_src = pdata->brg_clk_src; + pi->mpsc_max_idle = pdata->max_idle; + pi->default_baud = pdata->default_baud; + pi->default_bits = pdata->default_bits; + pi->default_parity = pdata->default_parity; + pi->default_flow = pdata->default_flow; + + /* Initial values of mirrored regs */ + pi->MPSC_CHR_1_m = pdata->chr_1_val; + pi->MPSC_CHR_2_m = pdata->chr_2_val; + pi->MPSC_CHR_10_m = pdata->chr_10_val; + pi->MPSC_MPCR_m = pdata->mpcr_val; + pi->BRG_BCR_m = pdata->bcr_val; + + pi->shared_regs = &mpsc_shared_regs; + + pi->port.irq = platform_get_irq(pd, 0); +} + +static int mpsc_drv_probe(struct platform_device *dev) +{ + struct mpsc_port_info *pi; + int rc = -ENODEV; + + pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + pi = &mpsc_ports[dev->id]; + + if (!(rc = mpsc_drv_map_regs(pi, dev))) { + mpsc_drv_get_platform_data(pi, dev, dev->id); + pi->port.dev = &dev->dev; + + if (!(rc = mpsc_make_ready(pi))) { + spin_lock_init(&pi->tx_lock); + if (!(rc = uart_add_one_port(&mpsc_reg, + &pi->port))) { + rc = 0; + } else { + mpsc_release_port((struct uart_port *) + pi); + mpsc_drv_unmap_regs(pi); + } + } else { + mpsc_drv_unmap_regs(pi); + } + } + } + + return rc; +} + +static int mpsc_drv_remove(struct platform_device *dev) +{ + pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); + mpsc_release_port((struct uart_port *) + &mpsc_ports[dev->id].port); + mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); + return 0; + } else { + return -ENODEV; + } +} + +static struct platform_driver mpsc_driver = { + .probe = mpsc_drv_probe, + .remove = mpsc_drv_remove, + .driver = { + .name = MPSC_CTLR_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mpsc_drv_init(void) +{ + int rc; + + printk(KERN_INFO "Serial: MPSC driver\n"); + + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); + + if (!(rc = uart_register_driver(&mpsc_reg))) { + if (!(rc = platform_driver_register(&mpsc_shared_driver))) { + if ((rc = platform_driver_register(&mpsc_driver))) { + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + } + } else { + uart_unregister_driver(&mpsc_reg); + } + } + + return rc; +} + +static void __exit mpsc_drv_exit(void) +{ + platform_driver_unregister(&mpsc_driver); + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); +} + +module_init(mpsc_drv_init); +module_exit(mpsc_drv_exit); + +MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); +MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); +MODULE_VERSION(MPSC_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); +MODULE_ALIAS("platform:" MPSC_CTLR_NAME); |