tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1655 insertions, 0 deletions

diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
new file mode 100644
index 00000000000..c1967ac1c07
--- /dev/null
+++ b/drivers/tty/serial/sunzilog.c
@@ -0,0 +1,1655 @@
+/* sunzilog.c: Zilog serial driver for Sparc systems.
+ *
+ * Driver for Zilog serial chips found on Sun workstations and
+ * servers.  This driver could actually be made more generic.
+ *
+ * This is based on the old drivers/sbus/char/zs.c code.  A lot
+ * of code has been simply moved over directly from there but
+ * much has been rewritten.  Credits therefore go out to Eddie
+ * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
+ * work there.
+ *
+ * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#ifdef CONFIG_SERIO
+#include <linux/serio.h>
+#endif
+#include <linux/init.h>
+#include <linux/of_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunzilog.h"
+
+/* On 32-bit sparcs we need to delay after register accesses
+ * to accommodate sun4 systems, but we do not need to flush writes.
+ * On 64-bit sparc we only need to flush single writes to ensure
+ * completion.
+ */
+#ifndef CONFIG_SPARC64
+#define ZSDELAY()		udelay(5)
+#define ZSDELAY_LONG()		udelay(20)
+#define ZS_WSYNC(channel)	do { } while (0)
+#else
+#define ZSDELAY()
+#define ZSDELAY_LONG()
+#define ZS_WSYNC(__channel) \
+	readb(&((__channel)->control))
+#endif
+
+#define ZS_CLOCK		4915200 /* Zilog input clock rate. */
+#define ZS_CLOCK_DIVISOR	16      /* Divisor this driver uses. */
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_sunzilog_port {
+	struct uart_port		port;
+
+	/* IRQ servicing chain.  */
+	struct uart_sunzilog_port	*next;
+
+	/* Current values of Zilog write registers.  */
+	unsigned char			curregs[NUM_ZSREGS];
+
+	unsigned int			flags;
+#define SUNZILOG_FLAG_CONS_KEYB		0x00000001
+#define SUNZILOG_FLAG_CONS_MOUSE	0x00000002
+#define SUNZILOG_FLAG_IS_CONS		0x00000004
+#define SUNZILOG_FLAG_IS_KGDB		0x00000008
+#define SUNZILOG_FLAG_MODEM_STATUS	0x00000010
+#define SUNZILOG_FLAG_IS_CHANNEL_A	0x00000020
+#define SUNZILOG_FLAG_REGS_HELD		0x00000040
+#define SUNZILOG_FLAG_TX_STOPPED	0x00000080
+#define SUNZILOG_FLAG_TX_ACTIVE		0x00000100
+#define SUNZILOG_FLAG_ESCC		0x00000200
+#define SUNZILOG_FLAG_ISR_HANDLER	0x00000400
+
+	unsigned int cflag;
+
+	unsigned char			parity_mask;
+	unsigned char			prev_status;
+
+#ifdef CONFIG_SERIO
+	struct serio			serio;
+	int				serio_open;
+#endif
+};
+
+static void sunzilog_putchar(struct uart_port *port, int ch);
+
+#define ZILOG_CHANNEL_FROM_PORT(PORT)	((struct zilog_channel __iomem *)((PORT)->membase))
+#define UART_ZILOG(PORT)		((struct uart_sunzilog_port *)(PORT))
+
+#define ZS_IS_KEYB(UP)	((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
+#define ZS_IS_MOUSE(UP)	((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
+#define ZS_IS_CONS(UP)	((UP)->flags & SUNZILOG_FLAG_IS_CONS)
+#define ZS_IS_KGDB(UP)	((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
+#define ZS_WANTS_MODEM_STATUS(UP)	((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
+#define ZS_IS_CHANNEL_A(UP)	((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
+#define ZS_REGS_HELD(UP)	((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
+#define ZS_TX_STOPPED(UP)	((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
+#define ZS_TX_ACTIVE(UP)	((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
+
+/* Reading and writing Zilog8530 registers.  The delays are to make this
+ * driver work on the Sun4 which needs a settling delay after each chip
+ * register access, other machines handle this in hardware via auxiliary
+ * flip-flops which implement the settle time we do in software.
+ *
+ * The port lock must be held and local IRQs must be disabled
+ * when {read,write}_zsreg is invoked.
+ */
+static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
+				unsigned char reg)
+{
+	unsigned char retval;
+
+	writeb(reg, &channel->control);
+	ZSDELAY();
+	retval = readb(&channel->control);
+	ZSDELAY();
+
+	return retval;
+}
+
+static void write_zsreg(struct zilog_channel __iomem *channel,
+			unsigned char reg, unsigned char value)
+{
+	writeb(reg, &channel->control);
+	ZSDELAY();
+	writeb(value, &channel->control);
+	ZSDELAY();
+}
+
+static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
+{
+	int i;
+
+	for (i = 0; i < 32; i++) {
+		unsigned char regval;
+
+		regval = readb(&channel->control);
+		ZSDELAY();
+		if (regval & Rx_CH_AV)
+			break;
+
+		regval = read_zsreg(channel, R1);
+		readb(&channel->data);
+		ZSDELAY();
+
+		if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+			writeb(ERR_RES, &channel->control);
+			ZSDELAY();
+			ZS_WSYNC(channel);
+		}
+	}
+}
+
+/* This function must only be called when the TX is not busy.  The UART
+ * port lock must be held and local interrupts disabled.
+ */
+static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+{
+	int i;
+	int escc;
+	unsigned char r15;
+
+	/* Let pending transmits finish.  */
+	for (i = 0; i < 1000; i++) {
+		unsigned char stat = read_zsreg(channel, R1);
+		if (stat & ALL_SNT)
+			break;
+		udelay(100);
+	}
+
+	writeb(ERR_RES, &channel->control);
+	ZSDELAY();
+	ZS_WSYNC(channel);
+
+	sunzilog_clear_fifo(channel);
+
+	/* Disable all interrupts.  */
+	write_zsreg(channel, R1,
+		    regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
+
+	/* Set parity, sync config, stop bits, and clock divisor.  */
+	write_zsreg(channel, R4, regs[R4]);
+
+	/* Set misc. TX/RX control bits.  */
+	write_zsreg(channel, R10, regs[R10]);
+
+	/* Set TX/RX controls sans the enable bits.  */
+	write_zsreg(channel, R3, regs[R3] & ~RxENAB);
+	write_zsreg(channel, R5, regs[R5] & ~TxENAB);
+
+	/* Synchronous mode config.  */
+	write_zsreg(channel, R6, regs[R6]);
+	write_zsreg(channel, R7, regs[R7]);
+
+	/* Don't mess with the interrupt vector (R2, unused by us) and
+	 * master interrupt control (R9).  We make sure this is setup
+	 * properly at probe time then never touch it again.
+	 */
+
+	/* Disable baud generator.  */
+	write_zsreg(channel, R14, regs[R14] & ~BRENAB);
+
+	/* Clock mode control.  */
+	write_zsreg(channel, R11, regs[R11]);
+
+	/* Lower and upper byte of baud rate generator divisor.  */
+	write_zsreg(channel, R12, regs[R12]);
+	write_zsreg(channel, R13, regs[R13]);
+	
+	/* Now rewrite R14, with BRENAB (if set).  */
+	write_zsreg(channel, R14, regs[R14]);
+
+	/* External status interrupt control.  */
+	write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
+
+	/* ESCC Extension Register */
+	r15 = read_zsreg(channel, R15);
+	if (r15 & 0x01)	{
+		write_zsreg(channel, R7,  regs[R7p]);
+
+		/* External status interrupt and FIFO control.  */
+		write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
+		escc = 1;
+	} else {
+		 /* Clear FIFO bit case it is an issue */
+		regs[R15] &= ~FIFOEN;
+		escc = 0;
+	}
+
+	/* Reset external status interrupts.  */
+	write_zsreg(channel, R0, RES_EXT_INT); /* First Latch  */
+	write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
+
+	/* Rewrite R3/R5, this time without enables masked.  */
+	write_zsreg(channel, R3, regs[R3]);
+	write_zsreg(channel, R5, regs[R5]);
+
+	/* Rewrite R1, this time without IRQ enabled masked.  */
+	write_zsreg(channel, R1, regs[R1]);
+
+	return escc;
+}
+
+/* Reprogram the Zilog channel HW registers with the copies found in the
+ * software state struct.  If the transmitter is busy, we defer this update
+ * until the next TX complete interrupt.  Else, we do it right now.
+ *
+ * The UART port lock must be held and local interrupts disabled.
+ */
+static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
+				       struct zilog_channel __iomem *channel)
+{
+	if (!ZS_REGS_HELD(up)) {
+		if (ZS_TX_ACTIVE(up)) {
+			up->flags |= SUNZILOG_FLAG_REGS_HELD;
+		} else {
+			__load_zsregs(channel, up->curregs);
+		}
+	}
+}
+
+static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
+{
+	unsigned int cur_cflag = up->cflag;
+	int brg, new_baud;
+
+	up->cflag &= ~CBAUD;
+	up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
+
+	brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+	up->curregs[R12] = (brg & 0xff);
+	up->curregs[R13] = (brg >> 8) & 0xff;
+	sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
+}
+
+static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
+					 unsigned char ch, int is_break)
+{
+	if (ZS_IS_KEYB(up)) {
+		/* Stop-A is handled by drivers/char/keyboard.c now. */
+#ifdef CONFIG_SERIO
+		if (up->serio_open)
+			serio_interrupt(&up->serio, ch, 0);
+#endif
+	} else if (ZS_IS_MOUSE(up)) {
+		int ret = suncore_mouse_baud_detection(ch, is_break);
+
+		switch (ret) {
+		case 2:
+			sunzilog_change_mouse_baud(up);
+			/* fallthru */
+		case 1:
+			break;
+
+		case 0:
+#ifdef CONFIG_SERIO
+			if (up->serio_open)
+				serio_interrupt(&up->serio, ch, 0);
+#endif
+			break;
+		};
+	}
+}
+
+static struct tty_struct *
+sunzilog_receive_chars(struct uart_sunzilog_port *up,
+		       struct zilog_channel __iomem *channel)
+{
+	struct tty_struct *tty;
+	unsigned char ch, r1, flag;
+
+	tty = NULL;
+	if (up->port.state != NULL &&		/* Unopened serial console */
+	    up->port.state->port.tty != NULL)	/* Keyboard || mouse */
+		tty = up->port.state->port.tty;
+
+	for (;;) {
+
+		r1 = read_zsreg(channel, R1);
+		if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+			writeb(ERR_RES, &channel->control);
+			ZSDELAY();
+			ZS_WSYNC(channel);
+		}
+
+		ch = readb(&channel->control);
+		ZSDELAY();
+
+		/* This funny hack depends upon BRK_ABRT not interfering
+		 * with the other bits we care about in R1.
+		 */
+		if (ch & BRK_ABRT)
+			r1 |= BRK_ABRT;
+
+		if (!(ch & Rx_CH_AV))
+			break;
+
+		ch = readb(&channel->data);
+		ZSDELAY();
+
+		ch &= up->parity_mask;
+
+		if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
+			sunzilog_kbdms_receive_chars(up, ch, 0);
+			continue;
+		}
+
+		if (tty == NULL) {
+			uart_handle_sysrq_char(&up->port, ch);
+			continue;
+		}
+
+		/* A real serial line, record the character and status.  */
+		flag = TTY_NORMAL;
+		up->port.icount.rx++;
+		if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
+			if (r1 & BRK_ABRT) {
+				r1 &= ~(PAR_ERR | CRC_ERR);
+				up->port.icount.brk++;
+				if (uart_handle_break(&up->port))
+					continue;
+			}
+			else if (r1 & PAR_ERR)
+				up->port.icount.parity++;
+			else if (r1 & CRC_ERR)
+				up->port.icount.frame++;
+			if (r1 & Rx_OVR)
+				up->port.icount.overrun++;
+			r1 &= up->port.read_status_mask;
+			if (r1 & BRK_ABRT)
+				flag = TTY_BREAK;
+			else if (r1 & PAR_ERR)
+				flag = TTY_PARITY;
+			else if (r1 & CRC_ERR)
+				flag = TTY_FRAME;
+		}
+		if (uart_handle_sysrq_char(&up->port, ch))
+			continue;
+
+		if (up->port.ignore_status_mask == 0xff ||
+		    (r1 & up->port.ignore_status_mask) == 0) {
+		    	tty_insert_flip_char(tty, ch, flag);
+		}
+		if (r1 & Rx_OVR)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+
+	return tty;
+}
+
+static void sunzilog_status_handle(struct uart_sunzilog_port *up,
+				   struct zilog_channel __iomem *channel)
+{
+	unsigned char status;
+
+	status = readb(&channel->control);
+	ZSDELAY();
+
+	writeb(RES_EXT_INT, &channel->control);
+	ZSDELAY();
+	ZS_WSYNC(channel);
+
+	if (status & BRK_ABRT) {
+		if (ZS_IS_MOUSE(up))
+			sunzilog_kbdms_receive_chars(up, 0, 1);
+		if (ZS_IS_CONS(up)) {
+			/* Wait for BREAK to deassert to avoid potentially
+			 * confusing the PROM.
+			 */
+			while (1) {
+				status = readb(&channel->control);
+				ZSDELAY();
+				if (!(status & BRK_ABRT))
+					break;
+			}
+			sun_do_break();
+			return;
+		}
+	}
+
+	if (ZS_WANTS_MODEM_STATUS(up)) {
+		if (status & SYNC)
+			up->port.icount.dsr++;
+
+		/* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
+		 * But it does not tell us which bit has changed, we have to keep
+		 * track of this ourselves.
+		 */
+		if ((status ^ up->prev_status) ^ DCD)
+			uart_handle_dcd_change(&up->port,
+					       (status & DCD));
+		if ((status ^ up->prev_status) ^ CTS)
+			uart_handle_cts_change(&up->port,
+					       (status & CTS));
+
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+	}
+
+	up->prev_status = status;
+}
+
+static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
+				    struct zilog_channel __iomem *channel)
+{
+	struct circ_buf *xmit;
+
+	if (ZS_IS_CONS(up)) {
+		unsigned char status = readb(&channel->control);
+		ZSDELAY();
+
+		/* TX still busy?  Just wait for the next TX done interrupt.
+		 *
+		 * It can occur because of how we do serial console writes.  It would
+		 * be nice to transmit console writes just like we normally would for
+		 * a TTY line. (ie. buffered and TX interrupt driven).  That is not
+		 * easy because console writes cannot sleep.  One solution might be
+		 * to poll on enough port->xmit space becomming free.  -DaveM
+		 */
+		if (!(status & Tx_BUF_EMP))
+			return;
+	}
+
+	up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
+
+	if (ZS_REGS_HELD(up)) {
+		__load_zsregs(channel, up->curregs);
+		up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
+	}
+
+	if (ZS_TX_STOPPED(up)) {
+		up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+		goto ack_tx_int;
+	}
+
+	if (up->port.x_char) {
+		up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+		writeb(up->port.x_char, &channel->data);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+
+		up->port.icount.tx++;
+		up->port.x_char = 0;
+		return;
+	}
+
+	if (up->port.state == NULL)
+		goto ack_tx_int;
+	xmit = &up->port.state->xmit;
+	if (uart_circ_empty(xmit))
+		goto ack_tx_int;
+
+	if (uart_tx_stopped(&up->port))
+		goto ack_tx_int;
+
+	up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+	writeb(xmit->buf[xmit->tail], &channel->data);
+	ZSDELAY();
+	ZS_WSYNC(channel);
+
+	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+	up->port.icount.tx++;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&up->port);
+
+	return;
+
+ack_tx_int:
+	writeb(RES_Tx_P, &channel->control);
+	ZSDELAY();
+	ZS_WSYNC(channel);
+}
+
+static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
+{
+	struct uart_sunzilog_port *up = dev_id;
+
+	while (up) {
+		struct zilog_channel __iomem *channel
+			= ZILOG_CHANNEL_FROM_PORT(&up->port);
+		struct tty_struct *tty;
+		unsigned char r3;
+
+		spin_lock(&up->port.lock);
+		r3 = read_zsreg(channel, R3);
+
+		/* Channel A */
+		tty = NULL;
+		if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+			writeb(RES_H_IUS, &channel->control);
+			ZSDELAY();
+			ZS_WSYNC(channel);
+
+			if (r3 & CHARxIP)
+				tty = sunzilog_receive_chars(up, channel);
+			if (r3 & CHAEXT)
+				sunzilog_status_handle(up, channel);
+			if (r3 & CHATxIP)
+				sunzilog_transmit_chars(up, channel);
+		}
+		spin_unlock(&up->port.lock);
+
+		if (tty)
+			tty_flip_buffer_push(tty);
+
+		/* Channel B */
+		up = up->next;
+		channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+		spin_lock(&up->port.lock);
+		tty = NULL;
+		if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+			writeb(RES_H_IUS, &channel->control);
+			ZSDELAY();
+			ZS_WSYNC(channel);
+
+			if (r3 & CHBRxIP)
+				tty = sunzilog_receive_chars(up, channel);
+			if (r3 & CHBEXT)
+				sunzilog_status_handle(up, channel);
+			if (r3 & CHBTxIP)
+				sunzilog_transmit_chars(up, channel);
+		}
+		spin_unlock(&up->port.lock);
+
+		if (tty)
+			tty_flip_buffer_push(tty);
+
+		up = up->next;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* A convenient way to quickly get R0 status.  The caller must _not_ hold the
+ * port lock, it is acquired here.
+ */
+static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
+{
+	struct zilog_channel __iomem *channel;
+	unsigned char status;
+
+	channel = ZILOG_CHANNEL_FROM_PORT(port);
+	status = readb(&channel->control);
+	ZSDELAY();
+
+	return status;
+}
+
+/* The port lock is not held.  */
+static unsigned int sunzilog_tx_empty(struct uart_port *port)
+{
+	unsigned long flags;
+	unsigned char status;
+	unsigned int ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	status = sunzilog_read_channel_status(port);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (status & Tx_BUF_EMP)
+		ret = TIOCSER_TEMT;
+	else
+		ret = 0;
+
+	return ret;
+}
+
+/* The port lock is held and interrupts are disabled.  */
+static unsigned int sunzilog_get_mctrl(struct uart_port *port)
+{
+	unsigned char status;
+	unsigned int ret;
+
+	status = sunzilog_read_channel_status(port);
+
+	ret = 0;
+	if (status & DCD)
+		ret |= TIOCM_CAR;
+	if (status & SYNC)
+		ret |= TIOCM_DSR;
+	if (status & CTS)
+		ret |= TIOCM_CTS;
+
+	return ret;
+}
+
+/* The port lock is held and interrupts are disabled.  */
+static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+	unsigned char set_bits, clear_bits;
+
+	set_bits = clear_bits = 0;
+
+	if (mctrl & TIOCM_RTS)
+		set_bits |= RTS;
+	else
+		clear_bits |= RTS;
+	if (mctrl & TIOCM_DTR)
+		set_bits |= DTR;
+	else
+		clear_bits |= DTR;
+
+	/* NOTE: Not subject to 'transmitter active' rule.  */ 
+	up->curregs[R5] |= set_bits;
+	up->curregs[R5] &= ~clear_bits;
+	write_zsreg(channel, R5, up->curregs[R5]);
+}
+
+/* The port lock is held and interrupts are disabled.  */
+static void sunzilog_stop_tx(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+
+	up->flags |= SUNZILOG_FLAG_TX_STOPPED;
+}
+
+/* The port lock is held and interrupts are disabled.  */
+static void sunzilog_start_tx(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+	unsigned char status;
+
+	up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+	up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+
+	status = readb(&channel->control);
+	ZSDELAY();
+
+	/* TX busy?  Just wait for the TX done interrupt.  */
+	if (!(status & Tx_BUF_EMP))
+		return;
+
+	/* Send the first character to jump-start the TX done
+	 * IRQ sending engine.
+	 */
+	if (port->x_char) {
+		writeb(port->x_char, &channel->data);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+
+		port->icount.tx++;
+		port->x_char = 0;
+	} else {
+		struct circ_buf *xmit = &port->state->xmit;
+
+		writeb(xmit->buf[xmit->tail], &channel->data);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+
+		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+			uart_write_wakeup(&up->port);
+	}
+}
+
+/* The port lock is held.  */
+static void sunzilog_stop_rx(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = UART_ZILOG(port);
+	struct zilog_channel __iomem *channel;
+
+	if (ZS_IS_CONS(up))
+		return;
+
+	channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+	/* Disable all RX interrupts.  */
+	up->curregs[R1] &= ~RxINT_MASK;
+	sunzilog_maybe_update_regs(up, channel);
+}
+
+/* The port lock is held.  */
+static void sunzilog_enable_ms(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+	unsigned char new_reg;
+
+	new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
+	if (new_reg != up->curregs[R15]) {
+		up->curregs[R15] = new_reg;
+
+		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
+	}
+}
+
+/* The port lock is not held.  */
+static void sunzilog_break_ctl(struct uart_port *port, int break_state)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+	unsigned char set_bits, clear_bits, new_reg;
+	unsigned long flags;
+
+	set_bits = clear_bits = 0;
+
+	if (break_state)
+		set_bits |= SND_BRK;
+	else
+		clear_bits |= SND_BRK;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
+	if (new_reg != up->curregs[R5]) {
+		up->curregs[R5] = new_reg;
+
+		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		write_zsreg(channel, R5, up->curregs[R5]);
+	}
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __sunzilog_startup(struct uart_sunzilog_port *up)
+{
+	struct zilog_channel __iomem *channel;
+
+	channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+	up->prev_status = readb(&channel->control);
+
+	/* Enable receiver and transmitter.  */
+	up->curregs[R3] |= RxENAB;
+	up->curregs[R5] |= TxENAB;
+
+	up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+	sunzilog_maybe_update_regs(up, channel);
+}
+
+static int sunzilog_startup(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = UART_ZILOG(port);
+	unsigned long flags;
+
+	if (ZS_IS_CONS(up))
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__sunzilog_startup(up);
+	spin_unlock_irqrestore(&port->lock, flags);
+	return 0;
+}
+
+/*
+ * The test for ZS_IS_CONS is explained by the following e-mail:
+ *****
+ * From: Russell King <rmk@arm.linux.org.uk>
+ * Date: Sun, 8 Dec 2002 10:18:38 +0000
+ *
+ * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
+ * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
+ * > and I noticed that something is not right with reference
+ * > counting in this case. It seems that when the console
+ * > is open by kernel initially, this is not accounted
+ * > as an open, and uart_startup is not called.
+ *
+ * That is correct.  We are unable to call uart_startup when the serial
+ * console is initialised because it may need to allocate memory (as
+ * request_irq does) and the memory allocators may not have been
+ * initialised.
+ *
+ * 1. initialise the port into a state where it can send characters in the
+ *    console write method.
+ *
+ * 2. don't do the actual hardware shutdown in your shutdown() method (but
+ *    do the normal software shutdown - ie, free irqs etc)
+ *****
+ */
+static void sunzilog_shutdown(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = UART_ZILOG(port);
+	struct zilog_channel __iomem *channel;
+	unsigned long flags;
+
+	if (ZS_IS_CONS(up))
+		return;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+	/* Disable receiver and transmitter.  */
+	up->curregs[R3] &= ~RxENAB;
+	up->curregs[R5] &= ~TxENAB;
+
+	/* Disable all interrupts and BRK assertion.  */
+	up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+	up->curregs[R5] &= ~SND_BRK;
+	sunzilog_maybe_update_regs(up, channel);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Shared by TTY driver and serial console setup.  The port lock is held
+ * and local interrupts are disabled.
+ */
+static void
+sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
+		       unsigned int iflag, int brg)
+{
+
+	up->curregs[R10] = NRZ;
+	up->curregs[R11] = TCBR | RCBR;
+
+	/* Program BAUD and clock source. */
+	up->curregs[R4] &= ~XCLK_MASK;
+	up->curregs[R4] |= X16CLK;
+	up->curregs[R12] = brg & 0xff;
+	up->curregs[R13] = (brg >> 8) & 0xff;
+	up->curregs[R14] = BRSRC | BRENAB;
+
+	/* Character size, stop bits, and parity. */
+	up->curregs[R3] &= ~RxN_MASK;
+	up->curregs[R5] &= ~TxN_MASK;
+	switch (cflag & CSIZE) {
+	case CS5:
+		up->curregs[R3] |= Rx5;
+		up->curregs[R5] |= Tx5;
+		up->parity_mask = 0x1f;
+		break;
+	case CS6:
+		up->curregs[R3] |= Rx6;
+		up->curregs[R5] |= Tx6;
+		up->parity_mask = 0x3f;
+		break;
+	case CS7:
+		up->curregs[R3] |= Rx7;
+		up->curregs[R5] |= Tx7;
+		up->parity_mask = 0x7f;
+		break;
+	case CS8:
+	default:
+		up->curregs[R3] |= Rx8;
+		up->curregs[R5] |= Tx8;
+		up->parity_mask = 0xff;
+		break;
+	};
+	up->curregs[R4] &= ~0x0c;
+	if (cflag & CSTOPB)
+		up->curregs[R4] |= SB2;
+	else
+		up->curregs[R4] |= SB1;
+	if (cflag & PARENB)
+		up->curregs[R4] |= PAR_ENAB;
+	else
+		up->curregs[R4] &= ~PAR_ENAB;
+	if (!(cflag & PARODD))
+		up->curregs[R4] |= PAR_EVEN;
+	else
+		up->curregs[R4] &= ~PAR_EVEN;
+
+	up->port.read_status_mask = Rx_OVR;
+	if (iflag & INPCK)
+		up->port.read_status_mask |= CRC_ERR | PAR_ERR;
+	if (iflag & (BRKINT | PARMRK))
+		up->port.read_status_mask |= BRK_ABRT;
+
+	up->port.ignore_status_mask = 0;
+	if (iflag & IGNPAR)
+		up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
+	if (iflag & IGNBRK) {
+		up->port.ignore_status_mask |= BRK_ABRT;
+		if (iflag & IGNPAR)
+			up->port.ignore_status_mask |= Rx_OVR;
+	}
+
+	if ((cflag & CREAD) == 0)
+		up->port.ignore_status_mask = 0xff;
+}
+
+/* The port lock is not held.  */
+static void
+sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
+		     struct ktermios *old)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	unsigned long flags;
+	int baud, brg;
+
+	baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+	sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
+
+	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+		up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
+	else
+		up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
+
+	up->cflag = termios->c_cflag;
+
+	sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunzilog_type(struct uart_port *port)
+{
+	struct uart_sunzilog_port *up = UART_ZILOG(port);
+
+	return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
+}
+
+/* We do not request/release mappings of the registers here, this
+ * happens at early serial probe time.
+ */
+static void sunzilog_release_port(struct uart_port *port)
+{
+}
+
+static int sunzilog_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+/* These do not need to do anything interesting either.  */
+static void sunzilog_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* We do not support letting the user mess with the divisor, IRQ, etc. */
+static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	return -EINVAL;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int sunzilog_get_poll_char(struct uart_port *port)
+{
+	unsigned char ch, r1;
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel
+		= ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+
+	r1 = read_zsreg(channel, R1);
+	if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+		writeb(ERR_RES, &channel->control);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+	}
+
+	ch = readb(&channel->control);
+	ZSDELAY();
+
+	/* This funny hack depends upon BRK_ABRT not interfering
+	 * with the other bits we care about in R1.
+	 */
+	if (ch & BRK_ABRT)
+		r1 |= BRK_ABRT;
+
+	if (!(ch & Rx_CH_AV))
+		return NO_POLL_CHAR;
+
+	ch = readb(&channel->data);
+	ZSDELAY();
+
+	ch &= up->parity_mask;
+	return ch;
+}
+
+static void sunzilog_put_poll_char(struct uart_port *port,
+			unsigned char ch)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
+
+	sunzilog_putchar(&up->port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
+static struct uart_ops sunzilog_pops = {
+	.tx_empty	=	sunzilog_tx_empty,
+	.set_mctrl	=	sunzilog_set_mctrl,
+	.get_mctrl	=	sunzilog_get_mctrl,
+	.stop_tx	=	sunzilog_stop_tx,
+	.start_tx	=	sunzilog_start_tx,
+	.stop_rx	=	sunzilog_stop_rx,
+	.enable_ms	=	sunzilog_enable_ms,
+	.break_ctl	=	sunzilog_break_ctl,
+	.startup	=	sunzilog_startup,
+	.shutdown	=	sunzilog_shutdown,
+	.set_termios	=	sunzilog_set_termios,
+	.type		=	sunzilog_type,
+	.release_port	=	sunzilog_release_port,
+	.request_port	=	sunzilog_request_port,
+	.config_port	=	sunzilog_config_port,
+	.verify_port	=	sunzilog_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	sunzilog_get_poll_char,
+	.poll_put_char	=	sunzilog_put_poll_char,
+#endif
+};
+
+static int uart_chip_count;
+static struct uart_sunzilog_port *sunzilog_port_table;
+static struct zilog_layout __iomem **sunzilog_chip_regs;
+
+static struct uart_sunzilog_port *sunzilog_irq_chain;
+
+static struct uart_driver sunzilog_reg = {
+	.owner		=	THIS_MODULE,
+	.driver_name	=	"sunzilog",
+	.dev_name	=	"ttyS",
+	.major		=	TTY_MAJOR,
+};
+
+static int __init sunzilog_alloc_tables(int num_sunzilog)
+{
+	struct uart_sunzilog_port *up;
+	unsigned long size;
+	int num_channels = num_sunzilog * 2;
+	int i;
+
+	size = num_channels * sizeof(struct uart_sunzilog_port);
+	sunzilog_port_table = kzalloc(size, GFP_KERNEL);
+	if (!sunzilog_port_table)
+		return -ENOMEM;
+
+	for (i = 0; i < num_channels; i++) {
+		up = &sunzilog_port_table[i];
+
+		spin_lock_init(&up->port.lock);
+
+		if (i == 0)
+			sunzilog_irq_chain = up;
+
+		if (i < num_channels - 1)
+			up->next = up + 1;
+		else
+			up->next = NULL;
+	}
+
+	size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
+	sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
+	if (!sunzilog_chip_regs) {
+		kfree(sunzilog_port_table);
+		sunzilog_irq_chain = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void sunzilog_free_tables(void)
+{
+	kfree(sunzilog_port_table);
+	sunzilog_irq_chain = NULL;
+	kfree(sunzilog_chip_regs);
+}
+
+#define ZS_PUT_CHAR_MAX_DELAY	2000	/* 10 ms */
+
+static void sunzilog_putchar(struct uart_port *port, int ch)
+{
+	struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+	int loops = ZS_PUT_CHAR_MAX_DELAY;
+
+	/* This is a timed polling loop so do not switch the explicit
+	 * udelay with ZSDELAY as that is a NOP on some platforms.  -DaveM
+	 */
+	do {
+		unsigned char val = readb(&channel->control);
+		if (val & Tx_BUF_EMP) {
+			ZSDELAY();
+			break;
+		}
+		udelay(5);
+	} while (--loops);
+
+	writeb(ch, &channel->data);
+	ZSDELAY();
+	ZS_WSYNC(channel);
+}
+
+#ifdef CONFIG_SERIO
+
+static DEFINE_SPINLOCK(sunzilog_serio_lock);
+
+static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
+{
+	struct uart_sunzilog_port *up = serio->port_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sunzilog_serio_lock, flags);
+
+	sunzilog_putchar(&up->port, ch);
+
+	spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+	return 0;
+}
+
+static int sunzilog_serio_open(struct serio *serio)
+{
+	struct uart_sunzilog_port *up = serio->port_data;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sunzilog_serio_lock, flags);
+	if (!up->serio_open) {
+		up->serio_open = 1;
+		ret = 0;
+	} else
+		ret = -EBUSY;
+	spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+	return ret;
+}
+
+static void sunzilog_serio_close(struct serio *serio)
+{
+	struct uart_sunzilog_port *up = serio->port_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sunzilog_serio_lock, flags);
+	up->serio_open = 0;
+	spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+}
+
+#endif /* CONFIG_SERIO */
+
+#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
+static void
+sunzilog_console_write(struct console *con, const char *s, unsigned int count)
+{
+	struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+	unsigned long flags;
+	int locked = 1;
+
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
+	} else
+		spin_lock(&up->port.lock);
+
+	uart_console_write(&up->port, s, count, sunzilog_putchar);
+	udelay(2);
+
+	if (locked)
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
+}
+
+static int __init sunzilog_console_setup(struct console *con, char *options)
+{
+	struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+	unsigned long flags;
+	int baud, brg;
+
+	if (up->port.type != PORT_SUNZILOG)
+		return -1;
+
+	printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
+	       (sunzilog_reg.minor - 64) + con->index, con->index);
+
+	/* Get firmware console settings.  */
+	sunserial_console_termios(con, up->port.dev->of_node);
+
+	/* Firmware console speed is limited to 150-->38400 baud so
+	 * this hackish cflag thing is OK.
+	 */
+	switch (con->cflag & CBAUD) {
+	case B150: baud = 150; break;
+	case B300: baud = 300; break;
+	case B600: baud = 600; break;
+	case B1200: baud = 1200; break;
+	case B2400: baud = 2400; break;
+	case B4800: baud = 4800; break;
+	default: case B9600: baud = 9600; break;
+	case B19200: baud = 19200; break;
+	case B38400: baud = 38400; break;
+	};
+
+	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	up->curregs[R15] |= BRKIE;
+	sunzilog_convert_to_zs(up, con->cflag, 0, brg);
+
+	sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+	__sunzilog_startup(up);
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	return 0;
+}
+
+static struct console sunzilog_console_ops = {
+	.name	=	"ttyS",
+	.write	=	sunzilog_console_write,
+	.device	=	uart_console_device,
+	.setup	=	sunzilog_console_setup,
+	.flags	=	CON_PRINTBUFFER,
+	.index	=	-1,
+	.data   =	&sunzilog_reg,
+};
+
+static inline struct console *SUNZILOG_CONSOLE(void)
+{
+	return &sunzilog_console_ops;
+}
+
+#else
+#define SUNZILOG_CONSOLE()	(NULL)
+#endif
+
+static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up)
+{
+	int baud, brg;
+
+	if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
+		up->cflag = B1200 | CS8 | CLOCAL | CREAD;
+		baud = 1200;
+	} else {
+		up->cflag = B4800 | CS8 | CLOCAL | CREAD;
+		baud = 4800;
+	}
+
+	up->curregs[R15] |= BRKIE;
+	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+	sunzilog_convert_to_zs(up, up->cflag, 0, brg);
+	sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+	__sunzilog_startup(up);
+}
+
+#ifdef CONFIG_SERIO
+static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
+{
+	struct serio *serio = &up->serio;
+
+	serio->port_data = up;
+
+	serio->id.type = SERIO_RS232;
+	if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
+		serio->id.proto = SERIO_SUNKBD;
+		strlcpy(serio->name, "zskbd", sizeof(serio->name));
+	} else {
+		serio->id.proto = SERIO_SUN;
+		serio->id.extra = 1;
+		strlcpy(serio->name, "zsms", sizeof(serio->name));
+	}
+	strlcpy(serio->phys,
+		((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+		 "zs/serio0" : "zs/serio1"),
+		sizeof(serio->phys));
+
+	serio->write = sunzilog_serio_write;
+	serio->open = sunzilog_serio_open;
+	serio->close = sunzilog_serio_close;
+	serio->dev.parent = up->port.dev;
+
+	serio_register_port(serio);
+}
+#endif
+
+static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
+{
+	struct zilog_channel __iomem *channel;
+	unsigned long flags;
+	int baud, brg;
+
+	channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (ZS_IS_CHANNEL_A(up)) {
+		write_zsreg(channel, R9, FHWRES);
+		ZSDELAY_LONG();
+		(void) read_zsreg(channel, R0);
+	}
+
+	if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+			 SUNZILOG_FLAG_CONS_MOUSE)) {
+		up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+		up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+		up->curregs[R3] = RxENAB | Rx8;
+		up->curregs[R5] = TxENAB | Tx8;
+		up->curregs[R6] = 0x00; /* SDLC Address */
+		up->curregs[R7] = 0x7E; /* SDLC Flag    */
+		up->curregs[R9] = NV;
+		up->curregs[R7p] = 0x00;
+		sunzilog_init_kbdms(up);
+		/* Only enable interrupts if an ISR handler available */
+		if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+			up->curregs[R9] |= MIE;
+		write_zsreg(channel, R9, up->curregs[R9]);
+	} else {
+		/* Normal serial TTY. */
+		up->parity_mask = 0xff;
+		up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+		up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+		up->curregs[R3] = RxENAB | Rx8;
+		up->curregs[R5] = TxENAB | Tx8;
+		up->curregs[R6] = 0x00; /* SDLC Address */
+		up->curregs[R7] = 0x7E; /* SDLC Flag    */
+		up->curregs[R9] = NV;
+		up->curregs[R10] = NRZ;
+		up->curregs[R11] = TCBR | RCBR;
+		baud = 9600;
+		brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+		up->curregs[R12] = (brg & 0xff);
+		up->curregs[R13] = (brg >> 8) & 0xff;
+		up->curregs[R14] = BRSRC | BRENAB;
+		up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
+		up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
+		if (__load_zsregs(channel, up->curregs)) {
+			up->flags |= SUNZILOG_FLAG_ESCC;
+		}
+		/* Only enable interrupts if an ISR handler available */
+		if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+			up->curregs[R9] |= MIE;
+		write_zsreg(channel, R9, up->curregs[R9]);
+	}
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+#ifdef CONFIG_SERIO
+	if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+			 SUNZILOG_FLAG_CONS_MOUSE))
+		sunzilog_register_serio(up);
+#endif
+}
+
+static int zilog_irq = -1;
+
+static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match)
+{
+	static int kbm_inst, uart_inst;
+	int inst;
+	struct uart_sunzilog_port *up;
+	struct zilog_layout __iomem *rp;
+	int keyboard_mouse = 0;
+	int err;
+
+	if (of_find_property(op->dev.of_node, "keyboard", NULL))
+		keyboard_mouse = 1;
+
+	/* uarts must come before keyboards/mice */
+	if (keyboard_mouse)
+		inst = uart_chip_count + kbm_inst;
+	else
+		inst = uart_inst;
+
+	sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
+					      sizeof(struct zilog_layout),
+					      "zs");
+	if (!sunzilog_chip_regs[inst])
+		return -ENOMEM;
+
+	rp = sunzilog_chip_regs[inst];
+
+	if (zilog_irq == -1)
+		zilog_irq = op->archdata.irqs[0];
+
+	up = &sunzilog_port_table[inst * 2];
+
+	/* Channel A */
+	up[0].port.mapbase = op->resource[0].start + 0x00;
+	up[0].port.membase = (void __iomem *) &rp->channelA;
+	up[0].port.iotype = UPIO_MEM;
+	up[0].port.irq = op->archdata.irqs[0];
+	up[0].port.uartclk = ZS_CLOCK;
+	up[0].port.fifosize = 1;
+	up[0].port.ops = &sunzilog_pops;
+	up[0].port.type = PORT_SUNZILOG;
+	up[0].port.flags = 0;
+	up[0].port.line = (inst * 2) + 0;
+	up[0].port.dev = &op->dev;
+	up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
+	if (keyboard_mouse)
+		up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
+	sunzilog_init_hw(&up[0]);
+
+	/* Channel B */
+	up[1].port.mapbase = op->resource[0].start + 0x04;
+	up[1].port.membase = (void __iomem *) &rp->channelB;
+	up[1].port.iotype = UPIO_MEM;
+	up[1].port.irq = op->archdata.irqs[0];
+	up[1].port.uartclk = ZS_CLOCK;
+	up[1].port.fifosize = 1;
+	up[1].port.ops = &sunzilog_pops;
+	up[1].port.type = PORT_SUNZILOG;
+	up[1].port.flags = 0;
+	up[1].port.line = (inst * 2) + 1;
+	up[1].port.dev = &op->dev;
+	up[1].flags |= 0;
+	if (keyboard_mouse)
+		up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
+	sunzilog_init_hw(&up[1]);
+
+	if (!keyboard_mouse) {
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
+					    &sunzilog_reg, up[0].port.line,
+					    false))
+			up->flags |= SUNZILOG_FLAG_IS_CONS;
+		err = uart_add_one_port(&sunzilog_reg, &up[0].port);
+		if (err) {
+			of_iounmap(&op->resource[0],
+				   rp, sizeof(struct zilog_layout));
+			return err;
+		}
+		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
+					    &sunzilog_reg, up[1].port.line,
+					    false))
+			up->flags |= SUNZILOG_FLAG_IS_CONS;
+		err = uart_add_one_port(&sunzilog_reg, &up[1].port);
+		if (err) {
+			uart_remove_one_port(&sunzilog_reg, &up[0].port);
+			of_iounmap(&op->resource[0],
+				   rp, sizeof(struct zilog_layout));
+			return err;
+		}
+		uart_inst++;
+	} else {
+		printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
+		       "is a %s\n",
+		       dev_name(&op->dev),
+		       (unsigned long long) up[0].port.mapbase,
+		       op->archdata.irqs[0], sunzilog_type(&up[0].port));
+		printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
+		       "is a %s\n",
+		       dev_name(&op->dev),
+		       (unsigned long long) up[1].port.mapbase,
+		       op->archdata.irqs[0], sunzilog_type(&up[1].port));
+		kbm_inst++;
+	}
+
+	dev_set_drvdata(&op->dev, &up[0]);
+
+	return 0;
+}
+
+static void __devexit zs_remove_one(struct uart_sunzilog_port *up)
+{
+	if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
+#ifdef CONFIG_SERIO
+		serio_unregister_port(&up->serio);
+#endif
+	} else
+		uart_remove_one_port(&sunzilog_reg, &up->port);
+}
+
+static int __devexit zs_remove(struct platform_device *op)
+{
+	struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
+	struct zilog_layout __iomem *regs;
+
+	zs_remove_one(&up[0]);
+	zs_remove_one(&up[1]);
+
+	regs = sunzilog_chip_regs[up[0].port.line / 2];
+	of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id zs_match[] = {
+	{
+		.name = "zs",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, zs_match);
+
+static struct of_platform_driver zs_driver = {
+	.driver = {
+		.name = "zs",
+		.owner = THIS_MODULE,
+		.of_match_table = zs_match,
+	},
+	.probe		= zs_probe,
+	.remove		= __devexit_p(zs_remove),
+};
+
+static int __init sunzilog_init(void)
+{
+	struct device_node *dp;
+	int err;
+	int num_keybms = 0;
+	int num_sunzilog = 0;
+
+	for_each_node_by_name(dp, "zs") {
+		num_sunzilog++;
+		if (of_find_property(dp, "keyboard", NULL))
+			num_keybms++;
+	}
+
+	if (num_sunzilog) {
+		err = sunzilog_alloc_tables(num_sunzilog);
+		if (err)
+			goto out;
+
+		uart_chip_count = num_sunzilog - num_keybms;
+
+		err = sunserial_register_minors(&sunzilog_reg,
+						uart_chip_count * 2);
+		if (err)
+			goto out_free_tables;
+	}
+
+	err = of_register_platform_driver(&zs_driver);
+	if (err)
+		goto out_unregister_uart;
+
+	if (zilog_irq != -1) {
+		struct uart_sunzilog_port *up = sunzilog_irq_chain;
+		err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
+				  "zs", sunzilog_irq_chain);
+		if (err)
+			goto out_unregister_driver;
+
+		/* Enable Interrupts */
+		while (up) {
+			struct zilog_channel __iomem *channel;
+
+			/* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
+			channel          = ZILOG_CHANNEL_FROM_PORT(&up->port);
+			up->flags       |= SUNZILOG_FLAG_ISR_HANDLER;
+			up->curregs[R9] |= MIE;
+			write_zsreg(channel, R9, up->curregs[R9]);
+			up = up->next;
+		}
+	}
+
+out:
+	return err;
+
+out_unregister_driver:
+	of_unregister_platform_driver(&zs_driver);
+
+out_unregister_uart:
+	if (num_sunzilog) {
+		sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
+		sunzilog_reg.cons = NULL;
+	}
+
+out_free_tables:
+	sunzilog_free_tables();
+	goto out;
+}
+
+static void __exit sunzilog_exit(void)
+{
+	of_unregister_platform_driver(&zs_driver);
+
+	if (zilog_irq != -1) {
+		struct uart_sunzilog_port *up = sunzilog_irq_chain;
+
+		/* Disable Interrupts */
+		while (up) {
+			struct zilog_channel __iomem *channel;
+
+			/* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
+			channel          = ZILOG_CHANNEL_FROM_PORT(&up->port);
+			up->flags       &= ~SUNZILOG_FLAG_ISR_HANDLER;
+			up->curregs[R9] &= ~MIE;
+			write_zsreg(channel, R9, up->curregs[R9]);
+			up = up->next;
+		}
+
+		free_irq(zilog_irq, sunzilog_irq_chain);
+		zilog_irq = -1;
+	}
+
+	if (sunzilog_reg.nr) {
+		sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
+		sunzilog_free_tables();
+	}
+}
+
+module_init(sunzilog_init);
+module_exit(sunzilog_exit);
+
+MODULE_AUTHOR("David S. Miller");
+MODULE_DESCRIPTION("Sun Zilog serial port driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");