Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)

21 files changed, 2571 insertions, 304 deletions

diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index de0160e3f8c..d5bfd41707e 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work)
 #endif   
 }
 
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
 static int startup(struct m68k_serial * info)
 {
 	m68328_uart *uart = &uart_addr[info->line];
@@ -967,7 +945,7 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
         local_irq_restore(flags);
 }
 
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
@@ -1347,7 +1325,6 @@ rs68328_init(void)
 	    info->count = 0;
 	    info->blocked_open = 0;
 	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
 	    init_waitqueue_head(&info->open_wait);
 	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 664ceb0a158..8c9c3c0745d 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -159,7 +159,6 @@ struct m68k_serial {
 	int			xmit_tail;
 	int			xmit_cnt;
 	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index bc21eeae8fd..0a3e8787ed5 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value)
 }
 #endif
 
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+static int rs_360_tiocmget(struct tty_struct *tty)
 {
 	ser_info_t *info = (ser_info_t *)tty->driver_data;
 	unsigned int result = 0;
@@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+static int rs_360_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 #ifdef modem_control
@@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+static int rs_360_ioctl(struct tty_struct *tty,
 		    unsigned int cmd, unsigned long arg)
 {
 	int error;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6f7fd..b3b881bc471 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
 	return 0;
 }
 
+static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
+{
+	unsigned char status;
+
+	status = serial_in(up, 0x04); /* EXCR2 */
+#define PRESL(x) ((x) & 0x30)
+	if (PRESL(status) == 0x10) {
+		/* already in high speed mode */
+		return 0;
+	} else {
+		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+		serial_outp(up, 0x04, status);
+	}
+	return 1;
+}
+
 /*
  * We know that the chip has FIFOs.  Does it have an EFR?  The
  * EFR is located in the same register position as the IIR and
@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			quot = serial_dl_read(up);
 			quot <<= 3;
 
-			status1 = serial_in(up, 0x04); /* EXCR2 */
-			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-			serial_outp(up, 0x04, status1);
-
-			serial_dl_write(up, quot);
+			if (ns16550a_goto_highspeed(up))
+				serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
 	struct uart_8250_port *up = &serial8250_ports[line];
 
 	if (up->capabilities & UART_NATSEMI) {
-		unsigned char tmp;
-
 		/* Ensure it's still in high speed mode */
 		serial_outp(up, UART_LCR, 0xE0);
 
-		tmp = serial_in(up, 0x04); /* EXCR2 */
-		tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
-		tmp |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
-		serial_outp(up, 0x04, tmp);
+		ns16550a_goto_highspeed(up);
 
 		serial_outp(up, UART_LCR, 0);
+		up->port.uartclk = 921600*16;
 	}
 	uart_resume_port(&serial8250_reg, &up->port);
 }
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2b8334601c8..d9ccbf82509 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1319,6 +1319,18 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MSM_HS
+	tristate "MSM UART High Speed: Serial Driver"
+	depends on ARCH_MSM
+	select SERIAL_CORE
+	help
+	  If you have a machine based on MSM family of SoCs, you
+	  can enable its onboard high speed serial port by enabling
+	  this option.
+
+	  Choose M here to compile it as a module. The module will be
+	  called msm_serial_hs.
+
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
 	depends on ARM && ARCH_VT8500
@@ -1588,12 +1600,25 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH UART"
-	depends on PCI && DMADEVICES
+	tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
+	depends on PCI
 	select SERIAL_CORE
-	select PCH_DMA
 	help
 	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+	  This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+	  Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
+config SERIAL_MSM_SMD
+	bool "Enable tty device interface for some SMD ports"
+	default n
+	depends on MSM_SMD
+	help
+	  Enables userspace clients to read and write to some streaming SMD
+	  ports via tty device interface for MSM chipset.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 8ea92e9c73b..d94dc005c8a 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
+obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
@@ -92,3 +93,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
 obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
 obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
+obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index f9b49b5ff5e..8f014bb916b 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS];
 
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE)
 
-int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart
-				       *platp)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
-
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->flags = ASYNC_BOOT_AUTOCONF;
-		port->ops = &altera_jtaguart_ops;
-	}
-
-	return 0;
-}
-
 #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS)
 static void altera_jtaguart_console_putc(struct console *co, const char c)
 {
@@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co,
 	if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS)
 		return -EINVAL;
 	port = &altera_jtaguart_ports[co->index].port;
-	if (port->membase == 0)
+	if (port->membase == NULL)
 		return -ENODEV;
 	return 0;
 }
@@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
-	int i;
+	struct resource *res_irq, *res_mem;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) {
-		port = &altera_jtaguart_ports[i].port;
+	/* -1 emphasizes that the platform must have one port, no .N suffix */
+	if (i == -1)
+		i = 0;
 
-		port->line = i;
-		port->type = PORT_ALTERA_JTAGUART;
-		port->mapbase = platp[i].mapbase;
-		port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
-		port->iotype = SERIAL_IO_MEM;
-		port->irq = platp[i].irq;
-		port->ops = &altera_jtaguart_ops;
-		port->flags = ASYNC_BOOT_AUTOCONF;
+	if (i >= ALTERA_JTAGUART_MAXPORTS)
+		return -EINVAL;
 
-		uart_add_one_port(&altera_jtaguart_driver, port);
-	}
+	port = &altera_jtaguart_ports[i].port;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res_mem)
+		port->mapbase = res_mem->start;
+	else if (platp)
+		port->mapbase = platp->mapbase;
+	else
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res_irq)
+		port->irq = res_irq->start;
+	else if (platp)
+		port->irq = platp->irq;
+	else
+		return -ENODEV;
+
+	port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE);
+	if (!port->membase)
+		return -ENOMEM;
+
+	port->line = i;
+	port->type = PORT_ALTERA_JTAGUART;
+	port->iotype = SERIAL_IO_MEM;
+	port->ops = &altera_jtaguart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+
+	uart_add_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
@@ -454,13 +455,13 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
-	int i;
+	int i = pdev->id;
 
-	for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) {
-		port = &altera_jtaguart_ports[i].port;
-		if (port)
-			uart_remove_one_port(&altera_jtaguart_driver, port);
-	}
+	if (i == -1)
+		i = 0;
+
+	port = &altera_jtaguart_ports[i].port;
+	uart_remove_one_port(&altera_jtaguart_driver, port);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 721216292a5..3a573528555 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -86,16 +86,12 @@ struct altera_uart {
 
 static u32 altera_uart_readl(struct uart_port *port, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	return readl(port->membase + (reg << platp->bus_shift));
+	return readl(port->membase + (reg << port->regshift));
 }
 
 static void altera_uart_writel(struct uart_port *port, u32 dat, int reg)
 {
-	struct altera_uart_platform_uart *platp = port->private_data;
-
-	writel(dat, port->membase + (reg << platp->bus_shift));
+	writel(dat, port->membase + (reg << port->regshift));
 }
 
 static unsigned int altera_uart_tx_empty(struct uart_port *port)
@@ -546,13 +542,17 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	if (!port->membase)
 		return -ENOMEM;
 
+	if (platp)
+		port->regshift = platp->bus_shift;
+	else
+		port->regshift = 0;
+
 	port->line = i;
 	port->type = PORT_ALTERA_UART;
 	port->iotype = SERIAL_IO_MEM;
 	port->uartclk = platp->uartclk;
 	port->ops = &altera_uart_ops;
 	port->flags = UPF_BOOT_AUTOCONF;
-	port->private_data = platp;
 
 	uart_add_one_port(&altera_uart_driver, port);
 
@@ -561,9 +561,15 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 
 static int __devexit altera_uart_remove(struct platform_device *pdev)
 {
-	struct uart_port *port = &altera_uart_ports[pdev->id].port;
+	struct uart_port *port;
+	int i = pdev->id;
 
+	if (i == -1)
+		i = 0;
+
+	port = &altera_uart_ports[i].port;
 	uart_remove_one_port(&altera_uart_driver, port);
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2a1d52fb493..f119d176110 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void atmel_set_ldisc(struct uart_port *port, int new)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		atmel_enable_ms(port);
+	} else {
+		port->flags &= ~UPF_HARDPPS_CD;
+	}
+}
+
 /*
  * Return string describing the specified port
  */
@@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = {
 	.shutdown	= atmel_shutdown,
 	.flush_buffer	= atmel_flush_buffer,
 	.set_termios	= atmel_set_termios,
+	.set_ldisc	= atmel_set_ldisc,
 	.type		= atmel_type,
 	.release_port	= atmel_release_port,
 	.request_port	= atmel_request_port,
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index e95c524d9d1..c3ec0a61d85 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev)
 		sport->port.mapbase = res->start;
 
 		sport->port.irq = platform_get_irq(pdev, 0);
-		if (sport->port.irq < 0) {
+		if ((int)sport->port.irq < 0) {
 			dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n");
 			ret = -ENOENT;
 			goto out_error_unmap;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index bcc31f2140a..225123b37f1 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state)
 }
 
 static int
-rs_tiocmset(struct tty_struct *tty, struct file *file,
-		unsigned int set, unsigned int clear)
+rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned long flags;
@@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 static int
-rs_tiocmget(struct tty_struct *tty, struct file *file)
+rs_tiocmget(struct tty_struct *tty)
 {
 	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 	unsigned int result;
@@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file)
 
 
 static int
-rs_ioctl(struct tty_struct *tty, struct file * file,
+rs_ioctl(struct tty_struct *tty,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index ab93763862d..8ee5a41d340 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -8,7 +8,7 @@
  *		      Jan Dumon <j.dumon@option.com>
  *
  * Copyright (C) 2009, 2010 Intel Corp
- * Russ Gorby <richardx.r.gorby@intel.com>
+ * Russ Gorby <russ.gorby@intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -67,6 +67,7 @@
 #define IFX_SPI_MORE_MASK		0x10
 #define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
 #define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_MODE			SPI_MODE_1
 #define IFX_SPI_TTY_ID			0
 #define IFX_SPI_TIMEOUT_SEC		2
 #define IFX_SPI_HEADER_0		(-1)
@@ -76,7 +77,7 @@
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
 
 /* local variables */
-static int spi_b16 = 1;			/* 8 or 16 bit word length */
+static int spi_bpw = 16;		/* 8, 16 or 32 bit word length */
 static struct tty_driver *tty_drv;
 static struct ifx_spi_device *saved_ifx_dev;
 static struct lock_class_key ifx_spi_key;
@@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg)
  *	Map the signal state into Linux modem flags and report the value
  *	in Linux terms
  */
-static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+static int ifx_spi_tiocmget(struct tty_struct *tty)
 {
 	unsigned int value;
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
 /**
  *	ifx_spi_tiocmset	-	set modem bits
  *	@tty: the tty structure
- *	@filp: file handle issuing the request
  *	@set: bits to set
  *	@clear: bits to clear
  *
@@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
  *
  *	FIXME: do we need to kick the tranfers when we do this ?
  */
-static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+static int ifx_spi_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
@@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data)
 		/* note len is BYTES, not transfers */
 		ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
 		ifx_dev->spi_xfer.cs_change = 0;
-		ifx_dev->spi_xfer.speed_hz = 12500000;
+		ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
 		/* ifx_dev->spi_xfer.speed_hz = 390625; */
-		ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+		ifx_dev->spi_xfer.bits_per_word = spi_bpw;
 
 		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
 		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
@@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data)
 		/*
 		 * setup dma pointers
 		 */
-		if (ifx_dev->is_6160) {
+		if (ifx_dev->use_dma) {
 			ifx_dev->spi_msg.is_dma_mapped = 1;
 			ifx_dev->tx_dma = ifx_dev->tx_bus;
 			ifx_dev->rx_dma = ifx_dev->rx_bus;
@@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
 		goto error_ret;
 	}
 
-	pport->ops = &ifx_tty_port_ops;
 	tty_port_init(pport);
+	pport->ops = &ifx_tty_port_ops;
 	ifx_dev->minor = IFX_SPI_TTY_ID;
 	ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
 					       &ifx_dev->spi_dev->dev);
@@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 {
 	int ret;
 	int srdy;
-	struct ifx_modem_platform_data *pl_data = NULL;
+	struct ifx_modem_platform_data *pl_data;
 	struct ifx_spi_device *ifx_dev;
 
 	if (saved_ifx_dev) {
@@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
+	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+	if (!pl_data) {
+		dev_err(&spi->dev, "missing platform data!");
+		return -ENODEV;
+	}
+
 	/* initialize structure to hold our device variables */
 	ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
 	if (!ifx_dev) {
@@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 	init_timer(&ifx_dev->spi_timer);
 	ifx_dev->spi_timer.function = ifx_spi_timeout;
 	ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
-	ifx_dev->is_6160 = pl_data->is_6160;
+	ifx_dev->modem = pl_data->modem_type;
+	ifx_dev->use_dma = pl_data->use_dma;
+	ifx_dev->max_hz = pl_data->max_hz;
+	/* initialize spi mode, etc */
+	spi->max_speed_hz = ifx_dev->max_hz;
+	spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode);
+	spi->bits_per_word = spi_bpw;
+	ret = spi_setup(spi);
+	if (ret) {
+		dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+		return -ENODEV;
+	}
 
 	/* ensure SPI protocol flags are initialized to enable transfer */
 	ifx_dev->spi_more = 0;
 	ifx_dev->spi_slave_cts = 0;
 
 	/*initialize transfer and dma buffers */
-	ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->tx_bus,
 				GFP_KERNEL);
@@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		ret = -ENOMEM;
 		goto error_ret;
 	}
-	ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+	ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent,
 				IFX_SPI_TRANSFER_SIZE,
 				&ifx_dev->rx_bus,
 				GFP_KERNEL);
@@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		goto error_ret;
 	}
 
-	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
-	if (pl_data) {
-		ifx_dev->gpio.reset = pl_data->rst_pmu;
-		ifx_dev->gpio.po = pl_data->pwr_on;
-		ifx_dev->gpio.mrdy = pl_data->mrdy;
-		ifx_dev->gpio.srdy = pl_data->srdy;
-		ifx_dev->gpio.reset_out = pl_data->rst_out;
-	} else {
-		dev_err(&spi->dev, "missing platform data!");
-		ret = -ENODEV;
-		goto error_ret;
-	}
+	ifx_dev->gpio.reset = pl_data->rst_pmu;
+	ifx_dev->gpio.po = pl_data->pwr_on;
+	ifx_dev->gpio.mrdy = pl_data->mrdy;
+	ifx_dev->gpio.srdy = pl_data->srdy;
+	ifx_dev->gpio.reset_out = pl_data->rst_out;
 
 	dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
 		 ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
@@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = {
 MODULE_DEVICE_TABLE(spi, ifx_id_table);
 
 /* spi operations */
-static const struct spi_driver ifx_spi_driver_6160 = {
+static const struct spi_driver ifx_spi_driver = {
 	.driver = {
-		.name = "ifx6160",
+		.name = DRVNAME,
 		.bus = &spi_bus_type,
 		.pm = &ifx_spi_pm,
 		.owner = THIS_MODULE},
@@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
 	tty_unregister_driver(tty_drv);
-	spi_unregister_driver((void *)&ifx_spi_driver_6160);
+	spi_unregister_driver((void *)&ifx_spi_driver);
 }
 
 /**
@@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void)
 		return result;
 	}
 
-	result = spi_register_driver((void *)&ifx_spi_driver_6160);
+	result = spi_register_driver((void *)&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index deb7b8d977d..e8464baf9e7 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -29,8 +29,6 @@
 #define DRVNAME				"ifx6x60"
 #define TTYNAME				"ttyIFX"
 
-/* #define IFX_THROTTLE_CODE */
-
 #define IFX_SPI_MAX_MINORS		1
 #define IFX_SPI_TRANSFER_SIZE		2048
 #define IFX_SPI_FIFO_SIZE		4096
@@ -88,7 +86,9 @@ struct ifx_spi_device {
 	dma_addr_t rx_dma;
 	dma_addr_t tx_dma;
 
-	int is_6160;				/* Modem type */
+	int modem;		/* Modem type */
+	int use_dma;		/* provide dma-able addrs in SPI msg */
+	long max_hz;		/* max SPI frequency */
 
 	spinlock_t write_lock;
 	int write_pending;
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index d40010a22ec..c111f36f5d2 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -16,9 +16,7 @@
  *    2/3 chan to port 1, 4/5 chan to port 3. Even number chans
  *    are used for RX, odd chans for TX
  *
- * 2. In A0 stepping, UART will not support TX half empty flag
- *
- * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
+ * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always
  *    asserted, only when the HW is reset the DDCD and DDSR will
  *    be triggered
  */
@@ -41,8 +39,6 @@
 #include <linux/io.h>
 #include <linux/debugfs.h>
 
-#define  MFD_HSU_A0_STEPPING	1
-
 #define HSU_DMA_BUF_SIZE	2048
 
 #define chan_readl(chan, offset)	readl(chan->reg + offset)
@@ -51,7 +47,10 @@
 #define mfd_readl(obj, offset)		readl(obj->reg + offset)
 #define mfd_writel(obj, offset, val)	writel(val, obj->reg + offset)
 
-#define HSU_DMA_TIMEOUT_CHECK_FREQ	(HZ/10)
+static int hsu_dma_enable;
+module_param(hsu_dma_enable, int, 0);
+MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
+bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
 
 struct hsu_dma_buffer {
 	u8		*buf;
@@ -65,7 +64,6 @@ struct hsu_dma_chan {
 	enum dma_data_direction	dirt;
 	struct uart_hsu_port	*uport;
 	void __iomem		*reg;
-	struct timer_list	rx_timer; /* only needed by RX channel */
 };
 
 struct uart_hsu_port {
@@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf
 					 | (0x1 << 24)	/* timeout bit, see HSU Errata 1 */
 					 );
 	chan_writel(rxc, HSU_CH_CR, 0x3);
-
-	mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
 }
 
 /* Protected by spin_lock_irqsave(port->lock) */
@@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 		chan_writel(chan, HSU_CH_CR, 0x3);
 		return;
 	}
-	del_timer(&chan->rx_timer);
 
 	dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
 			dbuf->dma_size, DMA_FROM_DEVICE);
@@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
 	tty_flip_buffer_push(tty);
 
 	chan_writel(chan, HSU_CH_CR, 0x3);
-	chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ;
-	add_timer(&chan->rx_timer);
 
 }
 
@@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up)
 		return;
 	}
 
-#ifndef MFD_HSU_A0_STEPPING
+	/* The IRQ is for TX FIFO half-empty */
 	count = up->port.fifosize / 2;
-#else
-	/*
-	 * A0 only supports fully empty IRQ, and the first char written
-	 * into it won't clear the EMPT bit, so we may need be cautious
-	 * by useing a shorter buffer
-	 */
-	count = up->port.fifosize - 4;
-#endif
+
 	do {
 		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state)
 /*
  * What special to do:
  * 1. chose the 64B fifo mode
- * 2. make sure not to select half empty mode for A0 stepping
- * 3. start dma or pio depends on configuration
- * 4. we only allocate dma memory when needed
+ * 2. start dma or pio depends on configuration
+ * 3. we only allocate dma memory when needed
  */
 static int serial_hsu_startup(struct uart_port *port)
 {
@@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port)
 		container_of(port, struct uart_hsu_port, port);
 	unsigned long flags;
 
-	del_timer_sync(&up->rxc->rx_timer);
-
 	/* Disable interrupts from this port */
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
@@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B;
 
 	fcr |= UART_FCR_HSU_64B_FIFO;
-#ifdef MFD_HSU_A0_STEPPING
-	/* A0 doesn't support half empty IRQ */
-	fcr |= UART_FCR_FULL_EMPT_TXI;
-#endif
 
 	/*
 	 * Ok, we're now changing the port state.  Do it with
@@ -1343,28 +1322,6 @@ err_disable:
 	return ret;
 }
 
-static void hsu_dma_rx_timeout(unsigned long data)
-{
-	struct hsu_dma_chan *chan = (void *)data;
-	struct uart_hsu_port *up = chan->uport;
-	struct hsu_dma_buffer *dbuf = &up->rxbuf;
-	int count = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
-
-	if (!count) {
-		mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
-		goto exit;
-	}
-
-	hsu_dma_rx(up, 0);
-exit:
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
 static void hsu_global_init(void)
 {
 	struct hsu_port *hsu;
@@ -1415,6 +1372,12 @@ static void hsu_global_init(void)
 
 		serial_hsu_ports[i] = uport;
 		uport->index = i;
+
+		if (hsu_dma_enable & (1<<i))
+			uport->use_dma = 1;
+		else
+			uport->use_dma = 0;
+
 		uport++;
 	}
 
@@ -1427,12 +1390,6 @@ static void hsu_global_init(void)
 		dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET +
 				i * HSU_DMA_CHANS_REG_LENGTH;
 
-		/* Work around for RX */
-		if (dchan->dirt == DMA_FROM_DEVICE) {
-			init_timer(&dchan->rx_timer);
-			dchan->rx_timer.function = hsu_dma_rx_timeout;
-			dchan->rx_timer.data = (unsigned long)dchan;
-		}
 		dchan++;
 	}
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index b62857bf2fd..37e13c3d91d 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -51,7 +51,7 @@
 struct uart_max3110 {
 	struct uart_port port;
 	struct spi_device *spi;
-	char name[24];
+	char name[SPI_NAME_SIZE];
 
 	wait_queue_head_t wq;
 	struct task_struct *main_thread;
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
new file mode 100644
index 00000000000..2e7fc9cee9c
--- /dev/null
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -0,0 +1,1880 @@
+/*
+ * MSM 7k/8k High speed uart driver
+ *
+ * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2008 Google Inc.
+ * Modified: Nick Pelly <npelly@google.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * Has optional support for uart power management independent of linux
+ * suspend/resume:
+ *
+ * RX wakeup.
+ * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
+ * UART RX pin). This should only be used if there is not a wakeup
+ * GPIO on the UART CTS, and the first RX byte is known (for example, with the
+ * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will
+ * always be lost. RTS will be asserted even while the UART is off in this mode
+ * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
+ */
+
+#include <linux/module.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <linux/platform_data/msm_serial_hs.h>
+
+/* HSUART Registers */
+#define UARTDM_MR1_ADDR 0x0
+#define UARTDM_MR2_ADDR 0x4
+
+/* Data Mover result codes */
+#define RSLT_FIFO_CNTR_BMSK (0xE << 28)
+#define RSLT_VLD            BIT(1)
+
+/* write only register */
+#define UARTDM_CSR_ADDR 0x8
+#define UARTDM_CSR_115200 0xFF
+#define UARTDM_CSR_57600  0xEE
+#define UARTDM_CSR_38400  0xDD
+#define UARTDM_CSR_28800  0xCC
+#define UARTDM_CSR_19200  0xBB
+#define UARTDM_CSR_14400  0xAA
+#define UARTDM_CSR_9600   0x99
+#define UARTDM_CSR_7200   0x88
+#define UARTDM_CSR_4800   0x77
+#define UARTDM_CSR_3600   0x66
+#define UARTDM_CSR_2400   0x55
+#define UARTDM_CSR_1200   0x44
+#define UARTDM_CSR_600    0x33
+#define UARTDM_CSR_300    0x22
+#define UARTDM_CSR_150    0x11
+#define UARTDM_CSR_75     0x00
+
+/* write only register */
+#define UARTDM_TF_ADDR 0x70
+#define UARTDM_TF2_ADDR 0x74
+#define UARTDM_TF3_ADDR 0x78
+#define UARTDM_TF4_ADDR 0x7C
+
+/* write only register */
+#define UARTDM_CR_ADDR 0x10
+#define UARTDM_IMR_ADDR 0x14
+
+#define UARTDM_IPR_ADDR 0x18
+#define UARTDM_TFWR_ADDR 0x1c
+#define UARTDM_RFWR_ADDR 0x20
+#define UARTDM_HCR_ADDR 0x24
+#define UARTDM_DMRX_ADDR 0x34
+#define UARTDM_IRDA_ADDR 0x38
+#define UARTDM_DMEN_ADDR 0x3c
+
+/* UART_DM_NO_CHARS_FOR_TX */
+#define UARTDM_NCF_TX_ADDR 0x40
+
+#define UARTDM_BADR_ADDR 0x44
+
+#define UARTDM_SIM_CFG_ADDR 0x80
+/* Read Only register */
+#define UARTDM_SR_ADDR 0x8
+
+/* Read Only register */
+#define UARTDM_RF_ADDR  0x70
+#define UARTDM_RF2_ADDR 0x74
+#define UARTDM_RF3_ADDR 0x78
+#define UARTDM_RF4_ADDR 0x7C
+
+/* Read Only register */
+#define UARTDM_MISR_ADDR 0x10
+
+/* Read Only register */
+#define UARTDM_ISR_ADDR 0x14
+#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38
+
+#define UARTDM_RXFS_ADDR 0x50
+
+/* Register field Mask Mapping */
+#define UARTDM_SR_PAR_FRAME_BMSK        BIT(5)
+#define UARTDM_SR_OVERRUN_BMSK          BIT(4)
+#define UARTDM_SR_TXEMT_BMSK            BIT(3)
+#define UARTDM_SR_TXRDY_BMSK            BIT(2)
+#define UARTDM_SR_RXRDY_BMSK            BIT(0)
+
+#define UARTDM_CR_TX_DISABLE_BMSK       BIT(3)
+#define UARTDM_CR_RX_DISABLE_BMSK       BIT(1)
+#define UARTDM_CR_TX_EN_BMSK            BIT(2)
+#define UARTDM_CR_RX_EN_BMSK            BIT(0)
+
+/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */
+#define RESET_RX                0x10
+#define RESET_TX                0x20
+#define RESET_ERROR_STATUS      0x30
+#define RESET_BREAK_INT         0x40
+#define START_BREAK             0x50
+#define STOP_BREAK              0x60
+#define RESET_CTS               0x70
+#define RESET_STALE_INT         0x80
+#define RFR_LOW                 0xD0
+#define RFR_HIGH                0xE0
+#define CR_PROTECTION_EN        0x100
+#define STALE_EVENT_ENABLE      0x500
+#define STALE_EVENT_DISABLE     0x600
+#define FORCE_STALE_EVENT       0x400
+#define CLEAR_TX_READY          0x300
+#define RESET_TX_ERROR          0x800
+#define RESET_TX_DONE           0x810
+
+#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
+#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
+#define UARTDM_MR1_CTS_CTL_BMSK 0x40
+#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80
+
+#define UARTDM_MR2_ERROR_MODE_BMSK 0x40
+#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30
+
+/* bits per character configuration */
+#define FIVE_BPC  (0 << 4)
+#define SIX_BPC   (1 << 4)
+#define SEVEN_BPC (2 << 4)
+#define EIGHT_BPC (3 << 4)
+
+#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc
+#define STOP_BIT_ONE (1 << 2)
+#define STOP_BIT_TWO (3 << 2)
+
+#define UARTDM_MR2_PARITY_MODE_BMSK 0x3
+
+/* Parity configuration */
+#define NO_PARITY 0x0
+#define EVEN_PARITY 0x1
+#define ODD_PARITY 0x2
+#define SPACE_PARITY 0x3
+
+#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
+#define UARTDM_IPR_STALE_LSB_BMSK 0x1f
+
+/* These can be used for both ISR and IMR register */
+#define UARTDM_ISR_TX_READY_BMSK        BIT(7)
+#define UARTDM_ISR_CURRENT_CTS_BMSK     BIT(6)
+#define UARTDM_ISR_DELTA_CTS_BMSK       BIT(5)
+#define UARTDM_ISR_RXLEV_BMSK           BIT(4)
+#define UARTDM_ISR_RXSTALE_BMSK         BIT(3)
+#define UARTDM_ISR_RXBREAK_BMSK         BIT(2)
+#define UARTDM_ISR_RXHUNT_BMSK          BIT(1)
+#define UARTDM_ISR_TXLEV_BMSK           BIT(0)
+
+/* Field definitions for UART_DM_DMEN*/
+#define UARTDM_TX_DM_EN_BMSK 0x1
+#define UARTDM_RX_DM_EN_BMSK 0x2
+
+#define UART_FIFOSIZE 64
+#define UARTCLK 7372800
+
+/* Rx DMA request states */
+enum flush_reason {
+	FLUSH_NONE,
+	FLUSH_DATA_READY,
+	FLUSH_DATA_INVALID,  /* values after this indicate invalid data */
+	FLUSH_IGNORE = FLUSH_DATA_INVALID,
+	FLUSH_STOP,
+	FLUSH_SHUTDOWN,
+};
+
+/* UART clock states */
+enum msm_hs_clk_states_e {
+	MSM_HS_CLK_PORT_OFF,     /* port not in use */
+	MSM_HS_CLK_OFF,          /* clock disabled */
+	MSM_HS_CLK_REQUEST_OFF,  /* disable after TX and RX flushed */
+	MSM_HS_CLK_ON,           /* clock enabled */
+};
+
+/* Track the forced RXSTALE flush during clock off sequence.
+ * These states are only valid during MSM_HS_CLK_REQUEST_OFF */
+enum msm_hs_clk_req_off_state_e {
+	CLK_REQ_OFF_START,
+	CLK_REQ_OFF_RXSTALE_ISSUED,
+	CLK_REQ_OFF_FLUSH_ISSUED,
+	CLK_REQ_OFF_RXSTALE_FLUSHED,
+};
+
+/**
+ * struct msm_hs_tx
+ * @tx_ready_int_en: ok to dma more tx?
+ * @dma_in_flight: tx dma in progress
+ * @xfer: top level DMA command pointer structure
+ * @command_ptr: third level command struct pointer
+ * @command_ptr_ptr: second level command list struct pointer
+ * @mapped_cmd_ptr: DMA view of third level command struct
+ * @mapped_cmd_ptr_ptr: DMA view of second level command list struct
+ * @tx_count: number of bytes to transfer in DMA transfer
+ * @dma_base: DMA view of UART xmit buffer
+ *
+ * This structure describes a single Tx DMA transaction. MSM DMA
+ * commands have two levels of indirection. The top level command
+ * ptr points to a list of command ptr which in turn points to a
+ * single DMA 'command'. In our case each Tx transaction consists
+ * of a single second level pointer pointing to a 'box type' command.
+ */
+struct msm_hs_tx {
+	unsigned int tx_ready_int_en;
+	unsigned int dma_in_flight;
+	struct msm_dmov_cmd xfer;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	dma_addr_t mapped_cmd_ptr_ptr;
+	int tx_count;
+	dma_addr_t dma_base;
+};
+
+/**
+ * struct msm_hs_rx
+ * @flush: Rx DMA request state
+ * @xfer: top level DMA command pointer structure
+ * @cmdptr_dmaaddr: DMA view of second level command structure
+ * @command_ptr: third level DMA command pointer structure
+ * @command_ptr_ptr: second level DMA command list pointer
+ * @mapped_cmd_ptr: DMA view of the third level command structure
+ * @wait: wait for DMA completion before shutdown
+ * @buffer: destination buffer for RX DMA
+ * @rbuffer: DMA view of buffer
+ * @pool: dma pool out of which coherent rx buffer is allocated
+ * @tty_work: private work-queue for tty flip buffer push task
+ *
+ * This structure describes a single Rx DMA transaction. Rx DMA
+ * transactions use box mode DMA commands.
+ */
+struct msm_hs_rx {
+	enum flush_reason flush;
+	struct msm_dmov_cmd xfer;
+	dma_addr_t cmdptr_dmaaddr;
+	dmov_box *command_ptr;
+	u32 *command_ptr_ptr;
+	dma_addr_t mapped_cmd_ptr;
+	wait_queue_head_t wait;
+	dma_addr_t rbuffer;
+	unsigned char *buffer;
+	struct dma_pool *pool;
+	struct work_struct tty_work;
+};
+
+/**
+ * struct msm_hs_rx_wakeup
+ * @irq: IRQ line to be configured as interrupt source on Rx activity
+ * @ignore: boolean value. 1 = ignore the wakeup interrupt
+ * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
+ * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
+ *
+ * This is an optional structure required for UART Rx GPIO IRQ based
+ * wakeup from low power state. UART wakeup can be triggered by RX activity
+ * (using a wakeup GPIO on the UART RX pin). This should only be used if
+ * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
+ * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
+ * since the first RX byte will always be lost. RTS will be asserted even
+ * while the UART is clocked off in this mode of operation.
+ */
+struct msm_hs_rx_wakeup {
+	int irq;  /* < 0 indicates low power wakeup disabled */
+	unsigned char ignore;
+	unsigned char inject_rx;
+	char rx_to_inject;
+};
+
+/**
+ * struct msm_hs_port
+ * @uport: embedded uart port structure
+ * @imr_reg: shadow value of UARTDM_IMR
+ * @clk: uart input clock handle
+ * @tx: Tx transaction related data structure
+ * @rx: Rx transaction related data structure
+ * @dma_tx_channel: Tx DMA command channel
+ * @dma_rx_channel Rx DMA command channel
+ * @dma_tx_crci: Tx channel rate control interface number
+ * @dma_rx_crci: Rx channel rate control interface number
+ * @clk_off_timer: Timer to poll DMA event completion before clock off
+ * @clk_off_delay: clk_off_timer poll interval
+ * @clk_state: overall clock state
+ * @clk_req_off_state: post flush clock states
+ * @rx_wakeup: optional rx_wakeup feature related data
+ * @exit_lpm_cb: optional callback to exit low power mode
+ *
+ * Low level serial port structure.
+ */
+struct msm_hs_port {
+	struct uart_port uport;
+	unsigned long imr_reg;
+	struct clk *clk;
+	struct msm_hs_tx tx;
+	struct msm_hs_rx rx;
+
+	int dma_tx_channel;
+	int dma_rx_channel;
+	int dma_tx_crci;
+	int dma_rx_crci;
+
+	struct hrtimer clk_off_timer;
+	ktime_t clk_off_delay;
+	enum msm_hs_clk_states_e clk_state;
+	enum msm_hs_clk_req_off_state_e clk_req_off_state;
+
+	struct msm_hs_rx_wakeup rx_wakeup;
+	void (*exit_lpm_cb)(struct uart_port *);
+};
+
+#define MSM_UARTDM_BURST_SIZE 16   /* DM burst size (in bytes) */
+#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE
+#define UARTDM_RX_BUF_SIZE 512
+
+#define UARTDM_NR 2
+
+static struct msm_hs_port q_uart_port[UARTDM_NR];
+static struct platform_driver msm_serial_hs_platform_driver;
+static struct uart_driver msm_hs_driver;
+static struct uart_ops msm_hs_ops;
+static struct workqueue_struct *msm_hs_workqueue;
+
+#define UARTDM_TO_MSM(uart_port) \
+	container_of((uart_port), struct msm_hs_port, uport)
+
+static unsigned int use_low_power_rx_wakeup(struct msm_hs_port
+						   *msm_uport)
+{
+	return (msm_uport->rx_wakeup.irq >= 0);
+}
+
+static unsigned int msm_hs_read(struct uart_port *uport,
+				       unsigned int offset)
+{
+	return ioread32(uport->membase + offset);
+}
+
+static void msm_hs_write(struct uart_port *uport, unsigned int offset,
+				 unsigned int value)
+{
+	iowrite32(value, uport->membase + offset);
+}
+
+static void msm_hs_release_port(struct uart_port *port)
+{
+	iounmap(port->membase);
+}
+
+static int msm_hs_request_port(struct uart_port *port)
+{
+	port->membase = ioremap(port->mapbase, PAGE_SIZE);
+	if (unlikely(!port->membase))
+		return -ENOMEM;
+
+	/* configure the CR Protection to Enable */
+	msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN);
+	return 0;
+}
+
+static int __devexit msm_hs_remove(struct platform_device *pdev)
+{
+
+	struct msm_hs_port *msm_uport;
+	struct device *dev;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	dev = msm_uport->uport.dev;
+
+	dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+		      msm_uport->rx.rbuffer);
+	dma_pool_destroy(msm_uport->rx.pool);
+
+	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+			 DMA_TO_DEVICE);
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
+			 DMA_TO_DEVICE);
+
+	uart_remove_one_port(&msm_hs_driver, &msm_uport->uport);
+	clk_put(msm_uport->clk);
+
+	/* Free the tx resources */
+	kfree(msm_uport->tx.command_ptr);
+	kfree(msm_uport->tx.command_ptr_ptr);
+
+	/* Free the rx resources */
+	kfree(msm_uport->rx.command_ptr);
+	kfree(msm_uport->rx.command_ptr_ptr);
+
+	iounmap(msm_uport->uport.membase);
+
+	return 0;
+}
+
+static int msm_hs_init_clk_locked(struct uart_port *uport)
+{
+	int ret;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	ret = clk_enable(msm_uport->clk);
+	if (ret) {
+		printk(KERN_ERR "Error could not turn on UART clk\n");
+		return ret;
+	}
+
+	/* Set up the MREG/NREG/DREG/MNDREG */
+	ret = clk_set_rate(msm_uport->clk, uport->uartclk);
+	if (ret) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		clk_disable(msm_uport->clk);
+		return ret;
+	}
+
+	msm_uport->clk_state = MSM_HS_CLK_ON;
+	return 0;
+}
+
+/* Enable and Disable clocks  (Used for power management) */
+static void msm_hs_pm(struct uart_port *uport, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (use_low_power_rx_wakeup(msm_uport) ||
+	    msm_uport->exit_lpm_cb)
+		return;  /* ignore linux PM states,
+			    use msm_hs_request_clock API */
+
+	switch (state) {
+	case 0:
+		clk_enable(msm_uport->clk);
+		break;
+	case 3:
+		clk_disable(msm_uport->clk);
+		break;
+	default:
+		dev_err(uport->dev, "msm_serial: Unknown PM state %d\n",
+			state);
+	}
+}
+
+/*
+ * programs the UARTDM_CSR register with correct bit rates
+ *
+ * Interrupts should be disabled before we are called, as
+ * we modify Set Baud rate
+ * Set receive stale interrupt level, dependant on Bit Rate
+ * Goal is to have around 8 ms before indicate stale.
+ * roundup (((Bit Rate * .008) / 10) + 1
+ */
+static void msm_hs_set_bps_locked(struct uart_port *uport,
+				  unsigned int bps)
+{
+	unsigned long rxstale;
+	unsigned long data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	switch (bps) {
+	case 300:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75);
+		rxstale = 1;
+		break;
+	case 600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150);
+		rxstale = 1;
+		break;
+	case 1200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300);
+		rxstale = 1;
+		break;
+	case 2400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600);
+		rxstale = 1;
+		break;
+	case 4800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200);
+		rxstale = 1;
+		break;
+	case 9600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		rxstale = 2;
+		break;
+	case 14400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600);
+		rxstale = 3;
+		break;
+	case 19200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800);
+		rxstale = 4;
+		break;
+	case 28800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200);
+		rxstale = 6;
+		break;
+	case 38400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600);
+		rxstale = 8;
+		break;
+	case 57600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400);
+		rxstale = 16;
+		break;
+	case 76800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200);
+		rxstale = 16;
+		break;
+	case 115200:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800);
+		rxstale = 31;
+		break;
+	case 230400:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600);
+		rxstale = 31;
+		break;
+	case 460800:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	case 4000000:
+	case 3686400:
+	case 3200000:
+	case 3500000:
+	case 3000000:
+	case 2500000:
+	case 1500000:
+	case 1152000:
+	case 1000000:
+	case 921600:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
+		rxstale = 31;
+		break;
+	default:
+		msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
+		/* default to 9600 */
+		bps = 9600;
+		rxstale = 2;
+		break;
+	}
+	if (bps > 460800)
+		uport->uartclk = bps * 16;
+	else
+		uport->uartclk = UARTCLK;
+
+	if (clk_set_rate(msm_uport->clk, uport->uartclk)) {
+		printk(KERN_WARNING "Error setting clock rate on UART\n");
+		return;
+	}
+
+	data = rxstale & UARTDM_IPR_STALE_LSB_BMSK;
+	data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2);
+
+	msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+}
+
+/*
+ * termios :  new ktermios
+ * oldtermios:  old ktermios previous setting
+ *
+ * Configure the serial port
+ */
+static void msm_hs_set_termios(struct uart_port *uport,
+			       struct ktermios *termios,
+			       struct ktermios *oldtermios)
+{
+	unsigned int bps;
+	unsigned long data;
+	unsigned long flags;
+	unsigned int c_cflag = termios->c_cflag;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* 300 is the minimum baud support by the driver  */
+	bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000);
+
+	/* Temporary remapping  200 BAUD to 3.2 mbps */
+	if (bps == 200)
+		bps = 3200000;
+
+	msm_hs_set_bps_locked(uport, bps);
+
+	data = msm_hs_read(uport, UARTDM_MR2_ADDR);
+	data &= ~UARTDM_MR2_PARITY_MODE_BMSK;
+	/* set parity */
+	if (PARENB == (c_cflag & PARENB)) {
+		if (PARODD == (c_cflag & PARODD))
+			data |= ODD_PARITY;
+		else if (CMSPAR == (c_cflag & CMSPAR))
+			data |= SPACE_PARITY;
+		else
+			data |= EVEN_PARITY;
+	}
+
+	/* Set bits per char */
+	data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK;
+
+	switch (c_cflag & CSIZE) {
+	case CS5:
+		data |= FIVE_BPC;
+		break;
+	case CS6:
+		data |= SIX_BPC;
+		break;
+	case CS7:
+		data |= SEVEN_BPC;
+		break;
+	default:
+		data |= EIGHT_BPC;
+		break;
+	}
+	/* stop bits */
+	if (c_cflag & CSTOPB) {
+		data |= STOP_BIT_TWO;
+	} else {
+		/* otherwise 1 stop bit */
+		data |= STOP_BIT_ONE;
+	}
+	data |= UARTDM_MR2_ERROR_MODE_BMSK;
+	/* write parity/bits per char/stop bit configuration */
+	msm_hs_write(uport, UARTDM_MR2_ADDR, data);
+
+	/* Configure HW flow control */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK);
+
+	if (c_cflag & CRTSCTS) {
+		data |= UARTDM_MR1_CTS_CTL_BMSK;
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+	}
+
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	uport->ignore_status_mask = termios->c_iflag & INPCK;
+	uport->ignore_status_mask |= termios->c_iflag & IGNPAR;
+	uport->read_status_mask = (termios->c_cflag & CREAD);
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, 0);
+
+	/* Set Transmit software time out */
+	uart_update_timeout(uport, c_cflag, bps);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+
+	if (msm_uport->rx.flush == FLUSH_NONE) {
+		msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+	}
+
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*
+ *  Standard API, Transmitter
+ *  Any character in the transmit shift register is sent
+ */
+static unsigned int msm_hs_tx_empty(struct uart_port *uport)
+{
+	unsigned int data;
+	unsigned int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	data = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (data & UARTDM_SR_TXEMT_BMSK)
+		ret = TIOCSER_TEMT;
+
+	clk_disable(msm_uport->clk);
+
+	return ret;
+}
+
+/*
+ *  Standard API, Stop transmitter.
+ *  Any character in the transmit shift register is sent as
+ *  well as the current data mover transfer .
+ */
+static void msm_hs_stop_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_uport->tx.tx_ready_int_en = 0;
+}
+
+/*
+ *  Standard API, Stop receiver as soon as possible.
+ *
+ *  Function immediately terminates the operation of the
+ *  channel receiver and any incoming characters are lost. None
+ *  of the receiver status bits are affected by this command and
+ *  characters that are already in the receive FIFO there.
+ */
+static void msm_hs_stop_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	clk_enable(msm_uport->clk);
+
+	/* disable dlink */
+	data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+	data &= ~UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Disable the receiver */
+	if (msm_uport->rx.flush == FLUSH_NONE)
+		msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN)
+		msm_uport->rx.flush = FLUSH_STOP;
+
+	clk_disable(msm_uport->clk);
+}
+
+/*  Transmit the next chunk of data */
+static void msm_hs_submit_tx_locked(struct uart_port *uport)
+{
+	int left;
+	int tx_count;
+	dma_addr_t src_addr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct circ_buf *tx_buf = &msm_uport->uport.state->xmit;
+
+	if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) {
+		msm_hs_stop_tx_locked(uport);
+		return;
+	}
+
+	tx->dma_in_flight = 1;
+
+	tx_count = uart_circ_chars_pending(tx_buf);
+
+	if (UARTDM_TX_BUF_SIZE < tx_count)
+		tx_count = UARTDM_TX_BUF_SIZE;
+
+	left = UART_XMIT_SIZE - tx_buf->tail;
+
+	if (tx_count > left)
+		tx_count = left;
+
+	src_addr = tx->dma_base + tx_buf->tail;
+	dma_sync_single_for_device(uport->dev, src_addr, tx_count,
+				   DMA_TO_DEVICE);
+
+	tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) |
+				     ((tx_count + 15) >> 4);
+	tx->command_ptr->src_row_addr = src_addr;
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr,
+				   sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
+
+	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
+				   sizeof(u32 *), DMA_TO_DEVICE);
+
+	/* Save tx_count to use in Callback */
+	tx->tx_count = tx_count;
+	msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count);
+
+	/* Disable the tx_ready interrupt */
+	msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer);
+}
+
+/* Start to receive the next chunk of data */
+static void msm_hs_start_rx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE);
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE);
+	msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	msm_uport->rx.flush = FLUSH_NONE;
+	msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer);
+
+	/* might have finished RX and be ready to clock off */
+	hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay,
+			HRTIMER_MODE_REL);
+}
+
+/* Enable the transmitter Interrupt */
+static void msm_hs_start_tx_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	if (msm_uport->exit_lpm_cb)
+		msm_uport->exit_lpm_cb(uport);
+
+	if (msm_uport->tx.tx_ready_int_en == 0) {
+		msm_uport->tx.tx_ready_int_en = 1;
+		msm_hs_submit_tx_locked(uport);
+	}
+
+	clk_disable(msm_uport->clk);
+}
+
+/*
+ *  This routine is called when we are done with a DMA transfer
+ *
+ *  This routine is registered with Data mover when we set
+ *  up a Data Mover transfer. It is called from Data mover ISR
+ *  when the DMA transfer is done.
+ */
+static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport;
+
+	/* DMA did not finish properly */
+	WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) &&
+		!(result & RSLT_VLD));
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer);
+
+	spin_lock_irqsave(&msm_uport->uport.lock, flags);
+	clk_enable(msm_uport->clk);
+
+	msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK;
+	msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&msm_uport->uport.lock, flags);
+}
+
+/*
+ * This routine is called when we are done with a DMA transfer or the
+ * a flush has been sent to the data mover driver.
+ *
+ * This routine is registered with Data mover when we set up a Data Mover
+ *  transfer. It is called from Data mover ISR when the DMA transfer is done.
+ */
+static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
+					unsigned int result,
+					struct msm_dmov_errdata *err)
+{
+	int retval;
+	int rx_count;
+	unsigned long status;
+	unsigned int error_f = 0;
+	unsigned long flags;
+	unsigned int flush;
+	struct tty_struct *tty;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+
+	msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer);
+	uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	tty = uport->state->port.tty;
+
+	msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+
+	status = msm_hs_read(uport, UARTDM_SR_ADDR);
+
+	/* overflow is not connect to data in a FIFO */
+	if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) &&
+		     (uport->read_status_mask & CREAD))) {
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		uport->icount.buf_overrun++;
+		error_f = 1;
+	}
+
+	if (!(uport->ignore_status_mask & INPCK))
+		status = status & ~(UARTDM_SR_PAR_FRAME_BMSK);
+
+	if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) {
+		/* Can not tell difference between parity & frame error */
+		uport->icount.parity++;
+		error_f = 1;
+		if (uport->ignore_status_mask & IGNPAR)
+			tty_insert_flip_char(tty, 0, TTY_PARITY);
+	}
+
+	if (error_f)
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+
+	if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED)
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED;
+
+	flush = msm_uport->rx.flush;
+	if (flush == FLUSH_IGNORE)
+		msm_hs_start_rx_locked(uport);
+	if (flush == FLUSH_STOP)
+		msm_uport->rx.flush = FLUSH_SHUTDOWN;
+	if (flush >= FLUSH_DATA_INVALID)
+		goto out;
+
+	rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR);
+
+	if (0 != (uport->read_status_mask & CREAD)) {
+		retval = tty_insert_flip_string(tty, msm_uport->rx.buffer,
+						rx_count);
+		BUG_ON(retval != rx_count);
+	}
+
+	msm_hs_start_rx_locked(uport);
+
+out:
+	clk_disable(msm_uport->clk);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (flush < FLUSH_DATA_INVALID)
+		queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+}
+
+static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
+{
+	struct msm_hs_port *msm_uport =
+			container_of(work, struct msm_hs_port, rx.tty_work);
+	struct tty_struct *tty = msm_uport->uport.state->port.tty;
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ *  Standard API, Current states of modem control inputs
+ *
+ * Since CTS can be handled entirely by HARDWARE we always
+ * indicate clear to send and count on the TX FIFO to block when
+ * it fills up.
+ *
+ * - TIOCM_DCD
+ * - TIOCM_CTS
+ * - TIOCM_DSR
+ * - TIOCM_RI
+ *  (Unsupported) DCD and DSR will return them high. RI will return low.
+ */
+static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport)
+{
+	return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
+}
+
+/*
+ * True enables UART auto RFR, which indicates we are ready for data if the RX
+ * buffer is not full. False disables auto RFR, and deasserts RFR to indicate
+ * we are not ready for data. Must be called with UART clock on.
+ */
+static void set_rfr_locked(struct uart_port *uport, int auto_rfr)
+{
+	unsigned int data;
+
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+
+	if (auto_rfr) {
+		/* enable auto ready-for-receiving */
+		data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+	} else {
+		/* disable auto ready-for-receiving */
+		data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK;
+		msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+		/* RFR is active low, set high */
+		msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH);
+	}
+}
+
+/*
+ *  Standard API, used to set or clear RFR
+ */
+static void msm_hs_set_mctrl_locked(struct uart_port *uport,
+				    unsigned int mctrl)
+{
+	unsigned int auto_rfr;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	auto_rfr = TIOCM_RTS & mctrl ? 1 : 0;
+	set_rfr_locked(uport, auto_rfr);
+
+	clk_disable(msm_uport->clk);
+}
+
+/* Standard API, Enable modem status (CTS) interrupt  */
+static void msm_hs_enable_ms_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+
+	/* Enable DELTA_CTS Interrupt */
+	msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	clk_disable(msm_uport->clk);
+
+}
+
+/*
+ *  Standard API, Break Signal
+ *
+ * Control the transmission of a break signal. ctl eq 0 => break
+ * signal terminate ctl ne 0 => start break signal
+ */
+static void msm_hs_break_ctl(struct uart_port *uport, int ctl)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	clk_enable(msm_uport->clk);
+	msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK);
+	clk_disable(msm_uport->clk);
+}
+
+static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (cfg_flags & UART_CONFIG_TYPE) {
+		uport->type = PORT_MSM;
+		msm_hs_request_port(uport);
+	}
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+/*  Handle CTS changes (Called from interrupt handler) */
+static void msm_hs_handle_delta_cts(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* clear interrupt */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	uport->icount.cts++;
+
+	clk_disable(msm_uport->clk);
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	/* clear the IOCTL TIOCMIWAIT if called */
+	wake_up_interruptible(&uport->state->port.delta_msr_wait);
+}
+
+/* check if the TX path is flushed, and if so clock off
+ * returns 0 did not clock off, need to retry (still sending final byte)
+ *        -1 did not clock off, do not retry
+ *         1 if we clocked off
+ */
+static int msm_hs_check_clock_off_locked(struct uart_port *uport)
+{
+	unsigned long sr_status;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+
+	/* Cancel if tx tty buffer is not empty, dma is in flight,
+	 * or tx fifo is not empty, or rx fifo is not empty */
+	if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF ||
+	    !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight ||
+	    (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) ||
+	    !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK))  {
+		return -1;
+	}
+
+	/* Make sure the uart is finished with the last byte */
+	sr_status = msm_hs_read(uport, UARTDM_SR_ADDR);
+	if (!(sr_status & UARTDM_SR_TXEMT_BMSK))
+		return 0;  /* retry */
+
+	/* Make sure forced RXSTALE flush complete */
+	switch (msm_uport->clk_req_off_state) {
+	case CLK_REQ_OFF_START:
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED;
+		msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT);
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_ISSUED:
+	case CLK_REQ_OFF_FLUSH_ISSUED:
+		return 0;  /* RXSTALE flush not complete - retry */
+	case CLK_REQ_OFF_RXSTALE_FLUSHED:
+		break;  /* continue */
+	}
+
+	if (msm_uport->rx.flush != FLUSH_SHUTDOWN) {
+		if (msm_uport->rx.flush == FLUSH_NONE)
+			msm_hs_stop_rx_locked(uport);
+		return 0;  /* come back later to really clock off */
+	}
+
+	/* we really want to clock off */
+	clk_disable(msm_uport->clk);
+	msm_uport->clk_state = MSM_HS_CLK_OFF;
+
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		msm_uport->rx_wakeup.ignore = 1;
+		enable_irq(msm_uport->rx_wakeup.irq);
+	}
+	return 1;
+}
+
+static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer)
+{
+	unsigned long flags;
+	int ret = HRTIMER_NORESTART;
+	struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port,
+						     clk_off_timer);
+	struct uart_port *uport = &msm_uport->uport;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	if (!msm_hs_check_clock_off_locked(uport)) {
+		hrtimer_forward_now(timer, msm_uport->clk_off_delay);
+		ret = HRTIMER_RESTART;
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return ret;
+}
+
+static irqreturn_t msm_hs_isr(int irq, void *dev)
+{
+	unsigned long flags;
+	unsigned long isr_status;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR);
+
+	/* Uart RX starting */
+	if (isr_status & UARTDM_ISR_RXLEV_BMSK) {
+		msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+	/* Stale rx interrupt */
+	if (isr_status & UARTDM_ISR_RXSTALE_BMSK) {
+		msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
+		msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+
+		if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED)
+			msm_uport->clk_req_off_state =
+					CLK_REQ_OFF_FLUSH_ISSUED;
+		if (rx->flush == FLUSH_NONE) {
+			rx->flush = FLUSH_DATA_READY;
+			msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
+		}
+	}
+	/* tx ready interrupt */
+	if (isr_status & UARTDM_ISR_TX_READY_BMSK) {
+		/* Clear  TX Ready */
+		msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY);
+
+		if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) {
+			msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+			msm_hs_write(uport, UARTDM_IMR_ADDR,
+				     msm_uport->imr_reg);
+		}
+
+		/* Complete DMA TX transactions and submit new transactions */
+		tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE;
+
+		tx->dma_in_flight = 0;
+
+		uport->icount.tx += tx->tx_count;
+		if (tx->tx_ready_int_en)
+			msm_hs_submit_tx_locked(uport);
+
+		if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS)
+			uart_write_wakeup(uport);
+	}
+	if (isr_status & UARTDM_ISR_TXLEV_BMSK) {
+		/* TX FIFO is empty */
+		msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+		if (!msm_hs_check_clock_off_locked(uport))
+			hrtimer_start(&msm_uport->clk_off_timer,
+				      msm_uport->clk_off_delay,
+				      HRTIMER_MODE_REL);
+	}
+
+	/* Change in CTS interrupt */
+	if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
+		msm_hs_handle_delta_cts(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+void msm_hs_request_clock_off_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	if (msm_uport->clk_state == MSM_HS_CLK_ON) {
+		msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF;
+		msm_uport->clk_req_off_state = CLK_REQ_OFF_START;
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 0);
+		msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
+		msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+	}
+}
+
+/**
+ * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart
+ * clock once pending TX is flushed and Rx DMA command is terminated.
+ * @uport: uart_port structure for the device instance.
+ *
+ * This functions puts the device into a partially active low power mode. It
+ * waits to complete all pending tx transactions, flushes ongoing Rx DMA
+ * command and terminates UART side Rx transaction, puts UART HW in non DMA
+ * mode and then clocks off the device. A client calls this when no UART
+ * data is expected. msm_request_clock_on() must be called before any further
+ * UART can be sent or received.
+ */
+void msm_hs_request_clock_off(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_off_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+void msm_hs_request_clock_on_locked(struct uart_port *uport)
+{
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	unsigned int data;
+
+	switch (msm_uport->clk_state) {
+	case MSM_HS_CLK_OFF:
+		clk_enable(msm_uport->clk);
+		disable_irq_nosync(msm_uport->rx_wakeup.irq);
+		/* fall-through */
+	case MSM_HS_CLK_REQUEST_OFF:
+		if (msm_uport->rx.flush == FLUSH_STOP ||
+		    msm_uport->rx.flush == FLUSH_SHUTDOWN) {
+			msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+			data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
+			data |= UARTDM_RX_DM_EN_BMSK;
+			msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+		}
+		hrtimer_try_to_cancel(&msm_uport->clk_off_timer);
+		if (msm_uport->rx.flush == FLUSH_SHUTDOWN)
+			msm_hs_start_rx_locked(uport);
+		if (!use_low_power_rx_wakeup(msm_uport))
+			set_rfr_locked(uport, 1);
+		if (msm_uport->rx.flush == FLUSH_STOP)
+			msm_uport->rx.flush = FLUSH_IGNORE;
+		msm_uport->clk_state = MSM_HS_CLK_ON;
+		break;
+	case MSM_HS_CLK_ON:
+		break;
+	case MSM_HS_CLK_PORT_OFF:
+		break;
+	}
+}
+
+/**
+ * msm_hs_request_clock_on - Switch the device from partially active low
+ * power mode to fully active (i.e. clock on) mode.
+ * @uport: uart_port structure for the device.
+ *
+ * This function switches on the input clock, puts UART HW into DMA mode
+ * and enqueues an Rx DMA command if the device was in partially active
+ * mode. It has no effect if called with the device in inactive state.
+ */
+void msm_hs_request_clock_on(struct uart_port *uport)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	msm_hs_request_clock_on_locked(uport);
+	spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
+{
+	unsigned int wakeup = 0;
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = dev;
+	struct uart_port *uport = &msm_uport->uport;
+	struct tty_struct *tty = NULL;
+
+	spin_lock_irqsave(&uport->lock, flags);
+	if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
+		/* ignore the first irq - it is a pending irq that occured
+		 * before enable_irq() */
+		if (msm_uport->rx_wakeup.ignore)
+			msm_uport->rx_wakeup.ignore = 0;
+		else
+			wakeup = 1;
+	}
+
+	if (wakeup) {
+		/* the uart was clocked off during an rx, wake up and
+		 * optionally inject char into tty rx */
+		msm_hs_request_clock_on_locked(uport);
+		if (msm_uport->rx_wakeup.inject_rx) {
+			tty = uport->state->port.tty;
+			tty_insert_flip_char(tty,
+					     msm_uport->rx_wakeup.rx_to_inject,
+					     TTY_NORMAL);
+			queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
+		}
+	}
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static const char *msm_hs_type(struct uart_port *port)
+{
+	return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL;
+}
+
+/* Called when port is opened */
+static int msm_hs_startup(struct uart_port *uport)
+{
+	int ret;
+	int rfr_level;
+	unsigned long flags;
+	unsigned int data;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct circ_buf *tx_buf = &uport->state->xmit;
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	rfr_level = uport->fifosize;
+	if (rfr_level > 16)
+		rfr_level -= 16;
+
+	tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE,
+				      DMA_TO_DEVICE);
+
+	/* do not let tty layer execute RX in global workqueue, use a
+	 * dedicated workqueue managed by this driver */
+	uport->state->port.tty->low_latency = 1;
+
+	/* turn on uart clk */
+	ret = msm_hs_init_clk_locked(uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Turning uartclk failed!\n");
+		goto err_msm_hs_init_clk;
+	}
+
+	/* Set auto RFR Level */
+	data = msm_hs_read(uport, UARTDM_MR1_ADDR);
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK;
+	data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK;
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2));
+	data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level);
+	msm_hs_write(uport, UARTDM_MR1_ADDR, data);
+
+	/* Make sure RXSTALE count is non-zero */
+	data = msm_hs_read(uport, UARTDM_IPR_ADDR);
+	if (!data) {
+		data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK;
+		msm_hs_write(uport, UARTDM_IPR_ADDR, data);
+	}
+
+	/* Enable Data Mover Mode */
+	data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK;
+	msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
+
+	/* Reset TX */
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
+	msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW);
+	/* Turn on Uart Receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK);
+
+	/* Turn on Uart Transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK);
+
+	/* Initialize the tx */
+	tx->tx_ready_int_en = 0;
+	tx->dma_in_flight = 0;
+
+	tx->xfer.complete_func = msm_hs_dmov_tx_callback;
+	tx->xfer.execute_func = NULL;
+
+	tx->command_ptr->cmd = CMD_LC |
+	    CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX;
+
+	tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+
+	tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16);
+
+	tx->command_ptr->dst_row_addr =
+	    msm_uport->uport.mapbase + UARTDM_TF_ADDR;
+
+
+	/* Turn on Uart Receive */
+	rx->xfer.complete_func = msm_hs_dmov_rx_callback;
+	rx->xfer.execute_func = NULL;
+
+	rx->command_ptr->cmd = CMD_LC |
+	    CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX;
+
+	rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
+					   | (MSM_UARTDM_BURST_SIZE);
+	rx->command_ptr->row_offset =  MSM_UARTDM_BURST_SIZE;
+	rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR;
+
+
+	msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK;
+	/* Enable reading the current CTS, no harm even if CTS is ignored */
+	msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK;
+
+	msm_hs_write(uport, UARTDM_TFWR_ADDR, 0);  /* TXLEV on empty TX fifo */
+
+
+	ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH,
+			  "msm_hs_uart", msm_uport);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n");
+		goto err_request_irq;
+	}
+	if (use_low_power_rx_wakeup(msm_uport)) {
+		ret = request_irq(msm_uport->rx_wakeup.irq,
+				  msm_hs_rx_wakeup_isr,
+				  IRQF_TRIGGER_FALLING,
+				  "msm_hs_rx_wakeup", msm_uport);
+		if (unlikely(ret)) {
+			printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n");
+			free_irq(uport->irq, msm_uport);
+			goto err_request_irq;
+		}
+		disable_irq(msm_uport->rx_wakeup.irq);
+	}
+
+	spin_lock_irqsave(&uport->lock, flags);
+
+	msm_hs_write(uport, UARTDM_RFWR_ADDR, 0);
+	msm_hs_start_rx_locked(uport);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+	ret = pm_runtime_set_active(uport->dev);
+	if (ret)
+		dev_err(uport->dev, "set active error:%d\n", ret);
+	pm_runtime_enable(uport->dev);
+
+	return 0;
+
+err_request_irq:
+err_msm_hs_init_clk:
+	dma_unmap_single(uport->dev, tx->dma_base,
+				UART_XMIT_SIZE, DMA_TO_DEVICE);
+	return ret;
+}
+
+/* Initialize tx and rx data structures */
+static int __devinit uartdm_init_port(struct uart_port *uport)
+{
+	int ret = 0;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+	struct msm_hs_tx *tx = &msm_uport->tx;
+	struct msm_hs_rx *rx = &msm_uport->rx;
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr)
+		return -ENOMEM;
+
+	tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!tx->command_ptr_ptr) {
+		ret = -ENOMEM;
+		goto err_tx_command_ptr_ptr;
+	}
+
+	tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+	tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
+						tx->command_ptr_ptr,
+						sizeof(u32 *), DMA_TO_DEVICE);
+	tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
+
+	init_waitqueue_head(&rx->wait);
+
+	rx->pool = dma_pool_create("rx_buffer_pool", uport->dev,
+				   UARTDM_RX_BUF_SIZE, 16, 0);
+	if (!rx->pool) {
+		pr_err("%s(): cannot allocate rx_buffer_pool", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_create;
+	}
+
+	rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer);
+	if (!rx->buffer) {
+		pr_err("%s(): cannot allocate rx->buffer", __func__);
+		ret = -ENOMEM;
+		goto err_dma_pool_alloc;
+	}
+
+	/* Allocate the command pointer. Needs to be 64 bit aligned */
+	rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr;
+	}
+
+	rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	if (!rx->command_ptr_ptr) {
+		pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
+		ret = -ENOMEM;
+		goto err_rx_command_ptr_ptr;
+	}
+
+	rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) |
+					 (UARTDM_RX_BUF_SIZE >> 4);
+
+	rx->command_ptr->dst_row_addr = rx->rbuffer;
+
+	rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr,
+					    sizeof(dmov_box), DMA_TO_DEVICE);
+
+	*rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
+
+	rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
+					    sizeof(u32 *), DMA_TO_DEVICE);
+	rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
+
+	INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
+
+	return ret;
+
+err_rx_command_ptr_ptr:
+	kfree(rx->command_ptr);
+err_rx_command_ptr:
+	dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
+						msm_uport->rx.rbuffer);
+err_dma_pool_alloc:
+	dma_pool_destroy(msm_uport->rx.pool);
+err_dma_pool_create:
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
+				sizeof(u32 *), DMA_TO_DEVICE);
+	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
+				sizeof(dmov_box), DMA_TO_DEVICE);
+	kfree(msm_uport->tx.command_ptr_ptr);
+err_tx_command_ptr_ptr:
+	kfree(msm_uport->tx.command_ptr);
+	return ret;
+}
+
+static int __devinit msm_hs_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct uart_port *uport;
+	struct msm_hs_port *msm_uport;
+	struct resource *resource;
+	const struct msm_serial_hs_platform_data *pdata =
+						pdev->dev.platform_data;
+
+	if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
+		printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	msm_uport = &q_uart_port[pdev->id];
+	uport = &msm_uport->uport;
+
+	uport->dev = &pdev->dev;
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	uport->mapbase = resource->start;
+	uport->irq = platform_get_irq(pdev, 0);
+	if (unlikely(uport->irq < 0))
+		return -ENXIO;
+
+	if (unlikely(set_irq_wake(uport->irq, 1)))
+		return -ENXIO;
+
+	if (pdata == NULL || pdata->rx_wakeup_irq < 0)
+		msm_uport->rx_wakeup.irq = -1;
+	else {
+		msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq;
+		msm_uport->rx_wakeup.ignore = 1;
+		msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup;
+		msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject;
+
+		if (unlikely(msm_uport->rx_wakeup.irq < 0))
+			return -ENXIO;
+
+		if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1)))
+			return -ENXIO;
+	}
+
+	if (pdata == NULL)
+		msm_uport->exit_lpm_cb = NULL;
+	else
+		msm_uport->exit_lpm_cb = pdata->exit_lpm_cb;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_channels");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_channel = resource->start;
+	msm_uport->dma_rx_channel = resource->end;
+
+	resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+						"uartdm_crci");
+	if (unlikely(!resource))
+		return -ENXIO;
+
+	msm_uport->dma_tx_crci = resource->start;
+	msm_uport->dma_rx_crci = resource->end;
+
+	uport->iotype = UPIO_MEM;
+	uport->fifosize = UART_FIFOSIZE;
+	uport->ops = &msm_hs_ops;
+	uport->flags = UPF_BOOT_AUTOCONF;
+	uport->uartclk = UARTCLK;
+	msm_uport->imr_reg = 0x0;
+	msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk");
+	if (IS_ERR(msm_uport->clk))
+		return PTR_ERR(msm_uport->clk);
+
+	ret = uartdm_init_port(uport);
+	if (unlikely(ret))
+		return ret;
+
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+	hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+	msm_uport->clk_off_timer.function = msm_hs_clk_off_retry;
+	msm_uport->clk_off_delay = ktime_set(0, 1000000);  /* 1ms */
+
+	uport->line = pdev->id;
+	return uart_add_one_port(&msm_hs_driver, uport);
+}
+
+static int __init msm_serial_hs_init(void)
+{
+	int ret, i;
+
+	/* Init all UARTS as non-configured */
+	for (i = 0; i < UARTDM_NR; i++)
+		q_uart_port[i].uport.type = PORT_UNKNOWN;
+
+	msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs");
+	if (unlikely(!msm_hs_workqueue))
+		return -ENOMEM;
+
+	ret = uart_register_driver(&msm_hs_driver);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_uart_register_driver;
+	}
+
+	ret = platform_driver_register(&msm_serial_hs_platform_driver);
+	if (ret) {
+		printk(KERN_ERR "%s failed to load\n", __func__);
+		goto err_platform_driver_register;
+	}
+
+	return ret;
+
+err_platform_driver_register:
+	uart_unregister_driver(&msm_hs_driver);
+err_uart_register_driver:
+	destroy_workqueue(msm_hs_workqueue);
+	return ret;
+}
+module_init(msm_serial_hs_init);
+
+/*
+ *  Called by the upper layer when port is closed.
+ *     - Disables the port
+ *     - Unhook the ISR
+ */
+static void msm_hs_shutdown(struct uart_port *uport)
+{
+	unsigned long flags;
+	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
+
+	BUG_ON(msm_uport->rx.flush < FLUSH_STOP);
+
+	spin_lock_irqsave(&uport->lock, flags);
+	clk_enable(msm_uport->clk);
+
+	/* Disable the transmitter */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK);
+	/* Disable the receiver */
+	msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK);
+
+	pm_runtime_disable(uport->dev);
+	pm_runtime_set_suspended(uport->dev);
+
+	/* Free the interrupt */
+	free_irq(uport->irq, msm_uport);
+	if (use_low_power_rx_wakeup(msm_uport))
+		free_irq(msm_uport->rx_wakeup.irq, msm_uport);
+
+	msm_uport->imr_reg = 0;
+	msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
+
+	wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN);
+
+	clk_disable(msm_uport->clk);  /* to balance local clk_enable() */
+	if (msm_uport->clk_state != MSM_HS_CLK_OFF)
+		clk_disable(msm_uport->clk);  /* to balance clk_state */
+	msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
+
+	dma_unmap_single(uport->dev, msm_uport->tx.dma_base,
+			 UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+	spin_unlock_irqrestore(&uport->lock, flags);
+
+	if (cancel_work_sync(&msm_uport->rx.tty_work))
+		msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work);
+}
+
+static void __exit msm_serial_hs_exit(void)
+{
+	flush_workqueue(msm_hs_workqueue);
+	destroy_workqueue(msm_hs_workqueue);
+	platform_driver_unregister(&msm_serial_hs_platform_driver);
+	uart_unregister_driver(&msm_hs_driver);
+}
+module_exit(msm_serial_hs_exit);
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_hs_runtime_idle(struct device *dev)
+{
+	/*
+	 * returning success from idle results in runtime suspend to be
+	 * called
+	 */
+	return 0;
+}
+
+static int msm_hs_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_on(&msm_uport->uport);
+	return 0;
+}
+
+static int msm_hs_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev, struct
+						    platform_device, dev);
+	struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
+
+	msm_hs_request_clock_off(&msm_uport->uport);
+	return 0;
+}
+#else
+#define msm_hs_runtime_idle NULL
+#define msm_hs_runtime_resume NULL
+#define msm_hs_runtime_suspend NULL
+#endif
+
+static const struct dev_pm_ops msm_hs_dev_pm_ops = {
+	.runtime_suspend = msm_hs_runtime_suspend,
+	.runtime_resume  = msm_hs_runtime_resume,
+	.runtime_idle    = msm_hs_runtime_idle,
+};
+
+static struct platform_driver msm_serial_hs_platform_driver = {
+	.probe = msm_hs_probe,
+	.remove = __devexit_p(msm_hs_remove),
+	.driver = {
+		.name = "msm_serial_hs",
+		.owner = THIS_MODULE,
+		.pm   = &msm_hs_dev_pm_ops,
+	},
+};
+
+static struct uart_driver msm_hs_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial_hs",
+	.dev_name = "ttyHS",
+	.nr = UARTDM_NR,
+	.cons = 0,
+};
+
+static struct uart_ops msm_hs_ops = {
+	.tx_empty = msm_hs_tx_empty,
+	.set_mctrl = msm_hs_set_mctrl_locked,
+	.get_mctrl = msm_hs_get_mctrl_locked,
+	.stop_tx = msm_hs_stop_tx_locked,
+	.start_tx = msm_hs_start_tx_locked,
+	.stop_rx = msm_hs_stop_rx_locked,
+	.enable_ms = msm_hs_enable_ms_locked,
+	.break_ctl = msm_hs_break_ctl,
+	.startup = msm_hs_startup,
+	.shutdown = msm_hs_shutdown,
+	.set_termios = msm_hs_set_termios,
+	.pm = msm_hs_pm,
+	.type = msm_hs_type,
+	.config_port = msm_hs_config_port,
+	.release_port = msm_hs_release_port,
+	.request_port = msm_hs_request_port,
+};
+
+MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset");
+MODULE_VERSION("1.2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
new file mode 100644
index 00000000000..beeff1e8609
--- /dev/null
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -0,0 +1,236 @@
+/* drivers/tty/serial/msm_smd_tty.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+
+#include <mach/msm_smd.h>
+
+#define MAX_SMD_TTYS 32
+
+struct smd_tty_info {
+	struct tty_port port;
+	smd_channel_t *ch;
+};
+
+struct smd_tty_channel_desc {
+	int id;
+	const char *name;
+};
+
+static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
+
+static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
+	{ .id = 0, .name = "SMD_DS" },
+	{ .id = 27, .name = "SMD_GPSNMEA" },
+};
+
+static const struct smd_tty_channel_desc *smd_tty_channels =
+		smd_default_tty_channels;
+static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
+
+static void smd_tty_notify(void *priv, unsigned event)
+{
+	unsigned char *ptr;
+	int avail;
+	struct smd_tty_info *info = priv;
+	struct tty_struct *tty;
+
+	if (event != SMD_EVENT_DATA)
+		return;
+
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
+		return;
+
+	for (;;) {
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+		avail = smd_read_avail(info->ch);
+		if (avail == 0)
+			break;
+
+		avail = tty_prepare_flip_string(tty, &ptr, avail);
+
+		if (smd_read(info->ch, ptr, avail) != avail) {
+			/* shouldn't be possible since we're in interrupt
+			** context here and nobody else could 'steal' our
+			** characters.
+			*/
+			pr_err("OOPS - smd_tty_buffer mismatch?!");
+		}
+
+		tty_flip_buffer_push(tty);
+	}
+
+	/* XXX only when writable and necessary */
+	tty_wakeup(tty);
+	tty_kref_put(tty);
+}
+
+static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
+{
+	int i, res = 0;
+	int n = tty->index;
+	const char *name = NULL;
+	struct smd_tty_info *info = smd_tty + n;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		if (smd_tty_channels[i].id == n) {
+			name = smd_tty_channels[i].name;
+			break;
+		}
+	}
+	if (!name)
+		return -ENODEV;
+
+	if (info->ch)
+		smd_kick(info->ch);
+	else
+		res = smd_open(name, &info->ch, info, smd_tty_notify);
+
+	if (!res)
+		tty->driver_data = info;
+
+	return res;
+}
+
+static void smd_tty_port_shutdown(struct tty_port *tport)
+{
+	struct smd_tty_info *info;
+	struct tty_struct *tty = tty_port_tty_get(tport);
+
+	info = tty->driver_data;
+	if (info->ch) {
+		smd_close(info->ch);
+		info->ch = 0;
+	}
+
+	tty->driver_data = 0;
+	tty_kref_put(tty);
+}
+
+static int smd_tty_open(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = smd_tty + tty->index;
+
+	return tty_port_open(&info->port, tty, f);
+}
+
+static void smd_tty_close(struct tty_struct *tty, struct file *f)
+{
+	struct smd_tty_info *info = tty->driver_data;
+
+	tty_port_close(&info->port, tty, f);
+}
+
+static int smd_tty_write(struct tty_struct *tty,
+			 const unsigned char *buf, int len)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	int avail;
+
+	/* if we're writing to a packet channel we will
+	** never be able to write more data than there
+	** is currently space for
+	*/
+	avail = smd_write_avail(info->ch);
+	if (len > avail)
+		len = avail;
+
+	return smd_write(info->ch, buf, len);
+}
+
+static int smd_tty_write_room(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_write_avail(info->ch);
+}
+
+static int smd_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	return smd_read_avail(info->ch);
+}
+
+static void smd_tty_unthrottle(struct tty_struct *tty)
+{
+	struct smd_tty_info *info = tty->driver_data;
+	smd_kick(info->ch);
+}
+
+static const struct tty_port_operations smd_tty_port_ops = {
+	.shutdown = smd_tty_port_shutdown,
+	.activate = smd_tty_port_activate,
+};
+
+static const struct tty_operations smd_tty_ops = {
+	.open = smd_tty_open,
+	.close = smd_tty_close,
+	.write = smd_tty_write,
+	.write_room = smd_tty_write_room,
+	.chars_in_buffer = smd_tty_chars_in_buffer,
+	.unthrottle = smd_tty_unthrottle,
+};
+
+static struct tty_driver *smd_tty_driver;
+
+static int __init smd_tty_init(void)
+{
+	int ret, i;
+
+	smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
+	if (smd_tty_driver == 0)
+		return -ENOMEM;
+
+	smd_tty_driver->owner = THIS_MODULE;
+	smd_tty_driver->driver_name = "smd_tty_driver";
+	smd_tty_driver->name = "smd";
+	smd_tty_driver->major = 0;
+	smd_tty_driver->minor_start = 0;
+	smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+	smd_tty_driver->init_termios = tty_std_termios;
+	smd_tty_driver->init_termios.c_iflag = 0;
+	smd_tty_driver->init_termios.c_oflag = 0;
+	smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+	smd_tty_driver->init_termios.c_lflag = 0;
+	smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
+		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_set_operations(smd_tty_driver, &smd_tty_ops);
+
+	ret = tty_register_driver(smd_tty_driver);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < smd_tty_channels_len; i++) {
+		tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
+		smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
+		tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+	}
+
+	return 0;
+}
+
+module_init(smd_tty_init);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 5c7abe4c94d..6a18ca6ddaa 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -160,17 +160,17 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
  * A few common types, add more as needed.
  */
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
-	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
-	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
-	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
-	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
-	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
-	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
+	{ .compatible = "ns8250",   .data = (void *)PORT_8250, },
+	{ .compatible = "ns16450",  .data = (void *)PORT_16450, },
+	{ .compatible = "ns16550a", .data = (void *)PORT_16550A, },
+	{ .compatible = "ns16550",  .data = (void *)PORT_16550, },
+	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
+	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
-	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
-					.data = (void *)PORT_NWPSERIAL, },
+	{ .compatible = "ibm,qpace-nwp-serial",
+		.data = (void *)PORT_NWPSERIAL, },
 #endif
-	{ .type = "serial",			      .data = (void *)PORT_UNKNOWN, },
+	{ .type = "serial",         .data = (void *)PORT_UNKNOWN, },
 	{ /* end of list */ },
 };
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7f2f0105878..763537943a5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -20,6 +20,10 @@
  * this driver as required for the omap-platform.
  */
 
+#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status)
 			if (up->port.line == up->port.cons->index) {
 				/* Recover the break flag from console xmit */
 				lsr |= up->lsr_break_flag;
-				up->lsr_break_flag = 0;
 			}
 #endif
 			if (lsr & UART_LSR_BI)
@@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port)
 	up->ier = UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 
+	/* Enable module level wake up */
+	serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
-	/* Enable module level wake up */
-	serial_out(up, UART_OMAP_WER,
-		(state != 0) ? OMAP_UART_WER_MOD_WKUP : 0);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 70a61458ec4..a9ad7f33526 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -21,6 +21,7 @@
 #include <linux/serial_core.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/dmi.h>
 
 #include <linux/dmaengine.h>
 #include <linux/pch_dma.h>
@@ -40,10 +41,11 @@ enum {
 
 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
 
-#define PCH_UART_NR_GE_256FIFO		1
-#define PCH_UART_NR_GE_64FIFO		3
-#define PCH_UART_NR_GE	(PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
-#define PCH_UART_NR	PCH_UART_NR_GE
+/* Set the max number of UART port
+ * Intel EG20T PCH: 4 port
+ * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+*/
+#define PCH_UART_NR	4
 
 #define PCH_UART_HANDLED_RX_INT	(1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
 #define PCH_UART_HANDLED_TX_INT	(1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
@@ -192,6 +194,8 @@ enum {
 #define PCH_UART_HAL_LOOP		(PCH_UART_MCR_LOOP)
 #define PCH_UART_HAL_AFE		(PCH_UART_MCR_AFE)
 
+#define PCI_VENDOR_ID_ROHM		0x10DB
+
 struct pch_uart_buffer {
 	unsigned char *buf;
 	int size;
@@ -215,6 +219,7 @@ struct eg20t_port {
 	struct pch_uart_buffer rxbuf;
 	unsigned int dmsr;
 	unsigned int fcr;
+	unsigned int mcr;
 	unsigned int use_dma;
 	unsigned int use_dma_flag;
 	struct dma_async_tx_descriptor	*desc_tx;
@@ -223,13 +228,44 @@ struct eg20t_port {
 	struct pch_dma_slave		param_rx;
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
-	struct scatterlist		sg_tx;
+	struct scatterlist		*sg_tx_p;
+	int				nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
 	dma_addr_t			rx_buf_dma;
 };
 
+/**
+ * struct pch_uart_driver_data - private data structure for UART-DMA
+ * @port_type:			The number of DMA channel
+ * @line_no:			UART port line number (0, 1, 2...)
+ */
+struct pch_uart_driver_data {
+	int port_type;
+	int line_no;
+};
+
+enum pch_uart_num_t {
+	pch_et20t_uart0 = 0,
+	pch_et20t_uart1,
+	pch_et20t_uart2,
+	pch_et20t_uart3,
+	pch_ml7213_uart0,
+	pch_ml7213_uart1,
+	pch_ml7213_uart2,
+};
+
+static struct pch_uart_driver_data drv_dat[] = {
+	[pch_et20t_uart0] = {PCH_UART_8LINE, 0},
+	[pch_et20t_uart1] = {PCH_UART_2LINE, 1},
+	[pch_et20t_uart2] = {PCH_UART_2LINE, 2},
+	[pch_et20t_uart3] = {PCH_UART_2LINE, 3},
+	[pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
+};
+
 static unsigned int default_baud = 9600;
 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
@@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 
 	div = DIV_ROUND(priv->base_baud / 16, baud);
 	if (div < 0 || USHRT_MAX <= div) {
-		pr_err("Invalid Baud(div=0x%x)\n", div);
+		dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 		return -EINVAL;
 	}
 
@@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	dlm = ((unsigned int)div >> 8) & 0x00FFU;
 
 	if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
-		pr_err("Invalid parity(0x%x)\n", parity);
+		dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
 		return -EINVAL;
 	}
 
 	if (bits & ~PCH_UART_LCR_WLS) {
-		pr_err("Invalid bits(0x%x)\n", bits);
+		dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
 		return -EINVAL;
 	}
 
 	if (stb & ~PCH_UART_LCR_STB) {
-		pr_err("Invalid STB(0x%x)\n", stb);
+		dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
 		return -EINVAL;
 	}
 
@@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	lcr |= bits;
 	lcr |= stb;
 
-	pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+	dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
 		 __func__, baud, div, lcr, jiffies);
 	iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 	iowrite8(dll, priv->membase + PCH_UART_DLL);
@@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
 				    unsigned int flag)
 {
 	if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
-		pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+		dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
+			__func__, flag);
 		return -EINVAL;
 	}
 
@@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
 	u8 fcr;
 
 	if (dmamode & ~PCH_UART_FCR_DMS) {
-		pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+		dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
+			__func__, dmamode);
 		return -EINVAL;
 	}
 
 	if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
-		pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+		dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
+			__func__, fifo_size);
 		return -EINVAL;
 	}
 
 	if (trigger & ~PCH_UART_FCR_RFTL) {
-		pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+		dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
+			__func__, trigger);
 		return -EINVAL;
 	}
 
@@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
 	return get_msr(priv, priv->membase);
 }
 
-static int pch_uart_hal_write(struct eg20t_port *priv,
+static void pch_uart_hal_write(struct eg20t_port *priv,
 			      const unsigned char *buf, int tx_size)
 {
 	int i;
@@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv,
 		thr = buf[i++];
 		iowrite8(thr, priv->membase + PCH_UART_THR);
 	}
-	return i;
 }
 
 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
@@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return -EBUSY;
 	}
 
@@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
 	struct uart_port *port = &priv->port;
 
 	if (port->x_char) {
-		pr_debug("%s:X character send %02x (%lu)\n", __func__,
-			port->x_char, jiffies);
+		dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
+			__func__, port->x_char, jiffies);
 		buf[0] = port->x_char;
 		port->x_char = 0;
 		ret = 1;
@@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size)
 	port = &priv->port;
 	tty = tty_port_tty_get(&port->state->port);
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return 0;
 	}
 
@@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Tx DMA */
 	param = &priv->param_tx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line;
+	param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
+
 	param->tx_reg = port->mapbase + UART_TX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
+			__func__);
 		return;
 	}
 	priv->chan_tx = chan;
@@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port)
 	/* Set Rx DMA */
 	param = &priv->param_rx;
 	param->dma_dev = &dma_dev->dev;
-	param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+	param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
+
 	param->rx_reg = port->mapbase + UART_RX;
 	chan = dma_request_channel(mask, filter, param);
 	if (!chan) {
-		pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
+			__func__);
 		dma_release_channel(priv->chan_tx);
 		return;
 	}
@@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	int count;
 
 	if (!tty) {
-		pr_debug("%s:tty is busy now", __func__);
+		dev_dbg(priv->port.dev, "%s:tty is busy now", __func__);
 		return;
 	}
 
-	if (dma_push_rx(priv, priv->trigger_level))
+	dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
+	count = dma_push_rx(priv, priv->trigger_level);
+	if (count)
 		tty_flip_buffer_push(tty);
-
 	tty_kref_put(tty);
+	async_tx_ack(priv->desc_rx);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
 }
 
 static void pch_dma_tx_complete(void *arg)
@@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg)
 	struct eg20t_port *priv = arg;
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = priv->sg_tx_p;
+	int i;
 
-	xmit->tail += sg_dma_len(&priv->sg_tx);
+	for (i = 0; i < priv->nent; i++, sg++) {
+		xmit->tail += sg_dma_len(sg);
+		port->icount.tx += sg_dma_len(sg);
+	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
-	port->icount.tx += sg_dma_len(&priv->sg_tx);
-
 	async_tx_ack(priv->desc_tx);
+	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
+	priv->nent = 0;
+	kfree(priv->sg_tx_p);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
 
-static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+static int pop_tx(struct eg20t_port *priv, int size)
 {
 	int count = 0;
 	struct uart_port *port = &priv->port;
@@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
 		int cnt_to_end =
 		    CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 		int sz = min(size - count, cnt_to_end);
-		memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+		pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
 		xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
 		count += sz;
 	} while (!uart_circ_empty(xmit) && count < size);
 
 pop_tx_end:
-	pr_debug("%d characters. Remained %d characters. (%lu)\n",
+	dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
 		 count, size - count, jiffies);
 
 	return count;
@@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
 
-	sg_dma_len(sg) = priv->fifo_size;
+	sg_dma_len(sg) = priv->trigger_level;
 
 	sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
 		     sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
@@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
 			sg, 1, DMA_FROM_DEVICE,
-			DMA_PREP_INTERRUPT);
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
 	if (!desc)
 		return 0;
 
@@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	int ret;
 	int fifo_size;
 	int tx_size;
 	int size;
 	int tx_empty;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 	size = min(xmit->head - xmit->tail, fifo_size);
-	tx_size = pop_tx(priv, xmit->buf, size);
+	if (size < 0)
+		size = fifo_size;
+
+	tx_size = pop_tx(priv, size);
 	if (tx_size > 0) {
-		ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
-		port->icount.tx += ret;
+		port->icount.tx += tx_size;
 		tx_empty = 0;
 	}
 
 	priv->tx_empty = tx_empty;
 
-	if (tx_empty)
+	if (tx_empty) {
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+	}
 
 	return PCH_UART_HANDLED_TX_INT;
 }
@@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 {
 	struct uart_port *port = &priv->port;
 	struct circ_buf *xmit = &port->state->xmit;
-	struct scatterlist *sg = &priv->sg_tx;
+	struct scatterlist *sg;
 	int nent;
 	int fifo_size;
 	int tx_empty;
 	struct dma_async_tx_descriptor *desc;
+	int num;
+	int i;
+	int bytes;
+	int size;
+	int rem;
 
 	if (!priv->start_tx) {
-		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
+			__func__, jiffies);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		priv->tx_empty = 1;
+		return 0;
+	}
+
+	if (priv->tx_dma_use) {
+		dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
+			__func__, jiffies);
 		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 		priv->tx_empty = 1;
 		return 0;
@@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 		fifo_size--;
 	}
 
-	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+	bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
+			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+			     xmit->tail, UART_XMIT_SIZE));
+	if (!bytes) {
+		dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		uart_write_wakeup(port);
+		return 0;
+	}
+
+	if (bytes > fifo_size) {
+		num = bytes / fifo_size + 1;
+		size = fifo_size;
+		rem = bytes % fifo_size;
+	} else {
+		num = 1;
+		size = bytes;
+		rem = bytes;
+	}
+
+	dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
+		__func__, num, size, rem);
 
 	priv->tx_dma_use = 1;
 
-	sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+	priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
 
-	sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
-		    UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+	sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
+	sg = priv->sg_tx_p;
 
-	nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+	for (i = 0; i < num; i++, sg++) {
+		if (i == (num - 1))
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    rem, fifo_size * i);
+		else
+			sg_set_page(sg, virt_to_page(xmit->buf),
+				    size, fifo_size * i);
+	}
+
+	sg = priv->sg_tx_p;
+	nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
 	if (!nent) {
-		pr_err("%s:dma_map_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
-
-	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
-	sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
-			      sg->offset;
-	sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
-			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
-			     xmit->tail, UART_XMIT_SIZE));
+	priv->nent = nent;
+
+	for (i = 0; i < nent; i++, sg++) {
+		sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
+			      fifo_size * i;
+		sg_dma_address(sg) = (sg_dma_address(sg) &
+				    ~(UART_XMIT_SIZE - 1)) + sg->offset;
+		if (i == (nent - 1))
+			sg_dma_len(sg) = rem;
+		else
+			sg_dma_len(sg) = size;
+	}
 
 	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
-		sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+					priv->sg_tx_p, nent, DMA_TO_DEVICE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
-		pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+		dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",
+			__func__);
 		return 0;
 	}
-
-	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
+	dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
 	priv->desc_tx = desc;
 	desc->callback = pch_dma_tx_complete;
 	desc->callback_param = priv;
@@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			}
 			break;
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
-			if (priv->use_dma)
+			if (priv->use_dma) {
+				pch_uart_hal_disable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
 				ret = dma_handle_rx(priv);
-			else
+				if (!ret)
+					pch_uart_hal_enable_interrupt(priv,
+							PCH_UART_HAL_RX_INT);
+			} else {
 				ret = handle_rx(priv);
+			}
 			break;
 		case PCH_UART_IID_RDR_TO:	/* Received Data Ready
 						   (FIFO Timeout) */
@@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 			ret = PCH_UART_HANDLED_MS_INT;
 			break;
 		default:	/* Never junp to this label */
-			pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+			dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+				iid, jiffies);
 			ret = -1;
 			break;
 		}
@@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port)
 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	u32 mcr = 0;
-	unsigned int dat;
 	struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
 
 	if (mctrl & TIOCM_DTR)
@@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	if (mctrl & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;
 
-	if (mctrl) {
-		dat = pch_uart_get_mctrl(port);
-		dat |= mcr;
-		iowrite8(dat, priv->membase + UART_MCR);
-	}
+	if (priv->mcr & UART_MCR_AFE)
+		mcr |= UART_MCR_AFE;
+
+	if (mctrl)
+		iowrite8(mcr, priv->membase + UART_MCR);
 }
 
 static void pch_uart_stop_tx(struct uart_port *port)
@@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 
-	if (priv->use_dma)
-		if (priv->tx_dma_use)
+	if (priv->use_dma) {
+		if (priv->tx_dma_use) {
+			dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
+				__func__);
 			return;
+		}
+	}
 
 	priv->start_tx = 1;
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
@@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port)
 
 	priv = container_of(port, struct eg20t_port, port);
 	priv->tx_empty = 1;
-	port->uartclk = priv->base_baud;
+
+	if (port->uartclk)
+		priv->base_baud = port->uartclk;
+	else
+		port->uartclk = priv->base_baud;
+
 	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
 	ret = pch_uart_hal_set_line(priv, default_baud,
 			      PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
@@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port)
 	ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
 			      PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
 	if (ret)
-		pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+		dev_err(priv->port.dev,
+			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
 	if (priv->use_dma_flag)
 		pch_free_dma(port);
@@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port,
 	} else {
 		parity = PCH_UART_HAL_PARITY_NONE;
 	}
+
+	/* Only UART0 has auto hardware flow function */
+	if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
+		priv->mcr |= UART_MCR_AFE;
+	else
+		priv->mcr &= ~UART_MCR_AFE;
+
 	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
@@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port,
 
 	priv = container_of(port, struct eg20t_port, port);
 	if (serinfo->flags & UPF_LOW_LATENCY) {
-		pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+		dev_info(priv->port.dev,
+			"PCH UART : Use PIO Mode (without DMA)\n");
 		priv->use_dma = 0;
 		serinfo->flags &= ~UPF_LOW_LATENCY;
 	} else {
 #ifndef CONFIG_PCH_DMA
-		pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+		dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
+			__func__);
 		return -EOPNOTSUPP;
 #endif
 		priv->use_dma = 1;
 		priv->use_dma_flag = 1;
-		pr_info("PCH UART : Use DMA Mode\n");
+		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
 	}
 
 	return 0;
@@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = {
 };
 
 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
-						int port_type)
+					     const struct pci_device_id *id)
 {
 	struct eg20t_port *priv;
 	int ret;
@@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	unsigned int mapbase;
 	unsigned char *rxbuf;
 	int fifosize, base_baud;
-	static int num;
+	int port_type;
+	struct pch_uart_driver_data *board;
+
+	board = &drv_dat[id->driver_data];
+	port_type = board->port_type;
 
 	priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
 	if (priv == NULL)
@@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	if (!rxbuf)
 		goto init_port_free_txbuf;
 
+	base_baud = 1843200; /* 1.8432MHz */
+
+	/* quirk for CM-iTC board */
+	if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+		base_baud = 192000000; /* 192.0MHz */
+
 	switch (port_type) {
 	case PORT_UNKNOWN:
-		fifosize = 256; /* UART0 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 256; /* EG20T/ML7213: UART0 */
 		break;
 	case PORT_8250:
-		fifosize = 64; /* UART1~3 */
-		base_baud = 1843200; /* 1.8432MHz */
+		fifosize = 64; /* EG20T:UART1~3  ML7213: UART1~2*/
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
@@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.ops = &pch_uart_ops;
 	priv->port.flags = UPF_BOOT_AUTOCONF;
 	priv->port.fifosize = fifosize;
-	priv->port.line = num++;
+	priv->port.line = board->line_no;
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
+	spin_lock_init(&priv->port.lock);
+
 	pci_set_drvdata(pdev, priv);
 	pch_uart_hal_request(pdev, fifosize, base_baud);
+
 	ret = uart_add_one_port(&pch_uart_driver, &priv->port);
 	if (ret < 0)
 		goto init_port_hal_free;
@@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
-	 .driver_data = PCH_UART_8LINE},
+	 .driver_data = pch_et20t_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart1},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart2},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
-	 .driver_data = PCH_UART_2LINE},
+	 .driver_data = pch_et20t_uart3},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
+	 .driver_data = pch_ml7213_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
+	 .driver_data = pch_ml7213_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
+	 .driver_data = pch_ml7213_uart2},
 	{0,},
 };
 
@@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
 	if (ret < 0)
 		goto probe_error;
 
-	priv = pch_uart_init_port(pdev, id->driver_data);
+	priv = pch_uart_init_port(pdev, id);
 	if (!priv) {
 		ret = -EBUSY;
 		goto probe_disable_device;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 460a72d91bb..733fe8e73f0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty,
 	return put_user(result, value);
 }
 
-static int uart_tiocmget(struct tty_struct *tty, struct file *file)
+static int uart_tiocmget(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
 	struct tty_port *port = &state->port;
@@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 	int result = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		result = uport->mctrl;
-
 		spin_lock_irq(&uport->lock);
 		result |= uport->ops->get_mctrl(uport);
 		spin_unlock_irq(&uport->lock);
@@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int
-uart_tiocmset(struct tty_struct *tty, struct file *file,
-	      unsigned int set, unsigned int clear)
+uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *uport = state->uart_port;
@@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	int ret = -EIO;
 
 	mutex_lock(&port->mutex);
-	if ((!file || !tty_hung_up_p(file)) &&
-	    !(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
 		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
@@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty,
  * Called via sys_ioctl.  We can use spin_lock_irq() here.
  */
 static int
-uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
+uart_ioctl(struct tty_struct *tty, unsigned int cmd,
 	   unsigned long arg)
 {
 	struct uart_state *state = tty->driver_data;
@@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 
 	mutex_lock(&port->mutex);
 
-	if (tty_hung_up_p(filp)) {
+	if (tty->flags & (1 << TTY_IO_ERROR)) {
 		ret = -EIO;
 		goto out_up;
 	}
@@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (console_suspend_enabled && uart_console(uport)) {
+	if (uart_console(uport)) {
 		/*
 		 * First try to use the console cflag setting.
 		 */
@@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 		if (port->tty && port->tty->termios && termios.c_cflag == 0)
 			termios = *(port->tty->termios);
 
-		uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
-		console_start(uport->cons);
+		if (console_suspend_enabled)
+			console_start(uport->cons);
 	}
 
 	if (port->flags & ASYNC_SUSPENDED) {