diff options
| author | Tomoya MORINAGA <tomoya.rohm@gmail.com> | 2012-07-06 17:19:42 +0900 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-07-17 09:27:31 -0700 |
| commit | ae213f30358e5bf68a05badf059bb4d9115755f5 (patch) | |
| tree | 3e000b89eb0226e938f6e0a3e98bd8461f6ceecc /drivers/tty/serial | |
| parent | 669bd45f117cc8c7309acd6b6bb054fe4d9e46c0 (diff) | |
pch_uart: Fix rx error interrupt setting issue
Rx Error interrupt(E.G. parity error) is not enabled.
So, when parity error occurs, error interrupt is not occurred.
As a result, the received data is not dropped.
This patch adds enable/disable rx error interrupt code.
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/pch_uart.c | 18 |
1 files changed, 12 insertions, 6 deletions
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index c5bc23d6ade..2cc9b469462 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -757,7 +757,8 @@ static void pch_dma_rx_complete(void *arg) tty_flip_buffer_push(tty); tty_kref_put(tty); async_tx_ack(priv->desc_rx); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } static void pch_dma_tx_complete(void *arg) @@ -812,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv) int rx_size; int ret; if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); return 0; } buf = &priv->rxbuf; @@ -1081,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) case PCH_UART_IID_RDR: /* Received Data Ready */ if (priv->use_dma) { pch_uart_hal_disable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); ret = dma_handle_rx(priv); if (!ret) pch_uart_hal_enable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } else { ret = handle_rx(priv); } @@ -1211,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port) struct eg20t_port *priv; priv = container_of(port, struct eg20t_port, port); priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } /* Enable the modem status interrupts. */ @@ -1304,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port) pch_request_dma(port); priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); uart_update_timeout(port, CS8, default_baud); return 0; |