Merge 3.9-rc5 into tty-next

We need the fixes here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 54 insertions, 24 deletions

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c
index e5ddfd6fc46..46528d57be7 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3422,6 +3422,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
 #endif
 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
 #ifndef MODULE
 /* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
  * working as well for the module options so we don't break people.  We
@@ -3436,7 +3437,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
 static void __used s8250_options(void)
 {
 #undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
 
 	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
 	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
@@ -3448,5 +3449,6 @@ static void __used s8250_options(void)
 #endif
 }
 #else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
 #endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa76825229d..26e3a97ab15 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA	0xc001
 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
 #define PCI_VENDOR_ID_WCH		0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S	0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S	0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF	0x5046
 #define PCI_DEVICE_ID_WCH_CH353_2S1P	0x7053
@@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice      = PCI_ANY_ID,
 		.setup          = pci_wch_ch353_setup,
 	},
+	/* WCH CH352 2S card (16550 clone) */
+	{
+		.vendor		= PCI_VENDOR_ID_WCH,
+		.device		= PCI_DEVICE_ID_WCH_CH352_2S,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_wch_ch353_setup,
+	},
 	/*
 	 * ASIX devices with FIFO bug
 	 */
@@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	/*
 	 * Commtech, Inc. Fastcom adapters
 	 */
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 2ef9537bcb2..80fe91e64a5 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -33,6 +33,23 @@ config SERIAL_8250
 	  Most people will say Y or M here, so that they can use serial mice,
 	  modems and similar devices connecting to the standard serial ports.
 
+config SERIAL_8250_DEPRECATED_OPTIONS
+	bool "Support 8250_core.* kernel options (DEPRECATED)"
+	depends on SERIAL_8250
+	default y
+	---help---
+	  In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+	  accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+	  8250.nr_uarts=4. We now renamed the module back to 8250, but if
+	  anybody noticed in 3.7 and changed their userspace we still have to
+	  keep the 8350_core.* options around until they revert the changes
+	  they already did.
+
+	  If 8250 is built as a module, this adds 8250_core alias instead. 
+
+	  If you did not notice yet and/or you have userspace from pre-3.7, it
+	  is safe (and recommended) to say N here.
+
 config SERIAL_8250_PNP
 	bool "8250/16550 PNP device support" if EXPERT
 	depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a23838a4d53..36d68d05430 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the 8250 serial device drivers.
 #
 
-obj-$(CONFIG_SERIAL_8250)		+= 8250_core.o
-8250_core-y				:= 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP)	+= 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
+obj-$(CONFIG_SERIAL_8250)		+= 8250.o
+8250-y					:= 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA)		+= 8250_dma.o
 obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d4a7c241b75..3467462869c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -158,7 +158,7 @@ struct atmel_uart_port {
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
 
 #ifdef SUPPORT_SYSRQ
 static struct console atmel_console;
@@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
 		 * auto-enumerate it */
-		ret = find_first_zero_bit(&atmel_ports_in_use,
-				sizeof(atmel_ports_in_use));
+		ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
 
-	if (ret > ATMEL_MAX_UART) {
+	if (ret >= ATMEL_MAX_UART) {
 		ret = -ENODEV;
 		goto err;
 	}
 
-	if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+	if (test_and_set_bit(ret, atmel_ports_in_use)) {
 		/* port already in use */
 		ret = -EBUSY;
 		goto err;
@@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
 
 	/* "port" is allocated statically, so we shouldn't free it */
 
-	clear_bit(port->line, &atmel_ports_in_use);
+	clear_bit(port->line, atmel_ports_in_use);
 
 	clk_put(atmel_port->clk);
 
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index e343d667085..451687cb968 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -968,6 +968,7 @@ static struct uart_ops sunsu_pops = {
 #define UART_NR	4
 
 static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
 
 #ifdef CONFIG_SERIO
 
@@ -1337,13 +1338,8 @@ static int __init sunsu_console_setup(struct console *co, char *options)
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
 
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index >= UART_NR)
-		co->index = 0;
+	if (co->index > nr_inst)
+		return -ENODEV;
 	port = &sunsu_ports[co->index].port;
 
 	/*
@@ -1408,7 +1404,6 @@ static enum su_type su_get_type(struct device_node *dp)
 
 static int su_probe(struct platform_device *op)
 {
-	static int inst;
 	struct device_node *dp = op->dev.of_node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
@@ -1418,16 +1413,16 @@ static int su_probe(struct platform_device *op)
 
 	type = su_get_type(dp);
 	if (type == SU_PORT_PORT) {
-		if (inst >= UART_NR)
+		if (nr_inst >= UART_NR)
 			return -EINVAL;
-		up = &sunsu_ports[inst];
+		up = &sunsu_ports[nr_inst];
 	} else {
 		up = kzalloc(sizeof(*up), GFP_KERNEL);
 		if (!up)
 			return -ENOMEM;
 	}
 
-	up->port.line = inst;
+	up->port.line = nr_inst;
 
 	spin_lock_init(&up->port.lock);
 
@@ -1461,6 +1456,8 @@ static int su_probe(struct platform_device *op)
 		}
 		dev_set_drvdata(&op->dev, up);
 
+		nr_inst++;
+
 		return 0;
 	}
 
@@ -1488,7 +1485,7 @@ static int su_probe(struct platform_device *op)
 
 	dev_set_drvdata(&op->dev, up);
 
-	inst++;
+	nr_inst++;
 
 	return 0;
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 974c361a91f..4e5c77834c5 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -578,6 +578,8 @@ static int xuartps_startup(struct uart_port *port)
 	/* Receive Timeout register is enabled with value of 10 */
 	xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
 
+	/* Clear out any pending interrupts before enabling them */
+	xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
 
 	/* Set the Interrupt Registers with desired interrupts */
 	xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |