summaryrefslogtreecommitdiffstats
path: root/drivers/tty/synclink_gt.c
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2011-02-22 16:14:56 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2011-02-22 16:14:56 -0800
commita6afd9f3e819de4795fcd356e5bfad446e4323f2 (patch)
tree3402b3981867fd4057b4eb33583b6300ae93b9a6 /drivers/tty/synclink_gt.c
parent44ed76b78e158d852f640d533b7acc08b91f2132 (diff)
tty: move a number of tty drivers from drivers/char/ to drivers/tty/
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/tty/synclink_gt.c')
-rw-r--r--drivers/tty/synclink_gt.c5161
1 files changed, 5161 insertions, 0 deletions
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
new file mode 100644
index 00000000000..a35dd549a00
--- /dev/null
+++ b/drivers/tty/synclink_gt.c
@@ -0,0 +1,5161 @@
+/*
+ * Device driver for Microgate SyncLink GT serial adapters.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * DEBUG OUTPUT DEFINITIONS
+ *
+ * uncomment lines below to enable specific types of debug output
+ *
+ * DBGINFO information - most verbose output
+ * DBGERR serious errors
+ * DBGBH bottom half service routine debugging
+ * DBGISR interrupt service routine debugging
+ * DBGDATA output receive and transmit data
+ * DBGTBUF output transmit DMA buffers and registers
+ * DBGRBUF output receive DMA buffers and registers
+ */
+
+#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
+#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
+#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
+#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
+#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
+/*#define DBGTBUF(info) dump_tbufs(info)*/
+/*#define DBGRBUF(info) dump_rbufs(info)*/
+
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+#include <linux/termios.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/synclink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/types.h>
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+/*
+ * module identification
+ */
+static char *driver_name = "SyncLink GT";
+static char *tty_driver_name = "synclink_gt";
+static char *tty_dev_prefix = "ttySLG";
+MODULE_LICENSE("GPL");
+#define MGSL_MAGIC 0x5401
+#define MAX_DEVICES 32
+
+static struct pci_device_id pci_table[] = {
+ {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,}, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void remove_one(struct pci_dev *dev);
+static struct pci_driver pci_driver = {
+ .name = "synclink_gt",
+ .id_table = pci_table,
+ .probe = init_one,
+ .remove = __devexit_p(remove_one),
+};
+
+static bool pci_registered;
+
+/*
+ * module configuration and status
+ */
+static struct slgt_info *slgt_device_list;
+static int slgt_device_count;
+
+static int ttymajor;
+static int debug_level;
+static int maxframe[MAX_DEVICES];
+
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+
+MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
+MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
+MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
+
+/*
+ * tty support and callbacks
+ */
+static struct tty_driver *serial_driver;
+
+static int open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
+
+static int write(struct tty_struct *tty, const unsigned char *buf, int count);
+static int put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static int chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static int set_break(struct tty_struct *tty, int break_state);
+
+/*
+ * generic HDLC support and callbacks
+ */
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(struct slgt_info *info);
+static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
+static int hdlcdev_init(struct slgt_info *info);
+static void hdlcdev_exit(struct slgt_info *info);
+#endif
+
+
+/*
+ * device specific structures, macros and functions
+ */
+
+#define SLGT_MAX_PORTS 4
+#define SLGT_REG_SIZE 256
+
+/*
+ * conditional wait facility
+ */
+struct cond_wait {
+ struct cond_wait *next;
+ wait_queue_head_t q;
+ wait_queue_t wait;
+ unsigned int data;
+};
+static void init_cond_wait(struct cond_wait *w, unsigned int data);
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
+static void flush_cond_wait(struct cond_wait **head);
+
+/*
+ * DMA buffer descriptor and access macros
+ */
+struct slgt_desc
+{
+ __le16 count;
+ __le16 status;
+ __le32 pbuf; /* physical address of data buffer */
+ __le32 next; /* physical address of next descriptor */
+
+ /* driver book keeping */
+ char *buf; /* virtual address of data buffer */
+ unsigned int pdesc; /* physical address of this descriptor */
+ dma_addr_t buf_dma_addr;
+ unsigned short buf_count;
+};
+
+#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
+#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
+#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
+#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
+#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
+#define desc_count(a) (le16_to_cpu((a).count))
+#define desc_status(a) (le16_to_cpu((a).status))
+#define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
+#define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
+#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
+#define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
+#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
+
+struct _input_signal_events {
+ int ri_up;
+ int ri_down;
+ int dsr_up;
+ int dsr_down;
+ int dcd_up;
+ int dcd_down;
+ int cts_up;
+ int cts_down;
+};
+
+/*
+ * device instance data structure
+ */
+struct slgt_info {
+ void *if_ptr; /* General purpose pointer (used by SPPP) */
+ struct tty_port port;
+
+ struct slgt_info *next_device; /* device list link */
+
+ int magic;
+
+ char device_name[25];
+ struct pci_dev *pdev;
+
+ int port_count; /* count of ports on adapter */
+ int adapter_num; /* adapter instance number */
+ int port_num; /* port instance number */
+
+ /* array of pointers to port contexts on this adapter */
+ struct slgt_info *port_array[SLGT_MAX_PORTS];
+
+ int line; /* tty line instance number */
+
+ struct mgsl_icount icount;
+
+ int timeout;
+ int x_char; /* xon/xoff character */
+ unsigned int read_status_mask;
+ unsigned int ignore_status_mask;
+
+ wait_queue_head_t status_event_wait_q;
+ wait_queue_head_t event_wait_q;
+ struct timer_list tx_timer;
+ struct timer_list rx_timer;
+
+ unsigned int gpio_present;
+ struct cond_wait *gpio_wait_q;
+
+ spinlock_t lock; /* spinlock for synchronizing with ISR */
+
+ struct work_struct task;
+ u32 pending_bh;
+ bool bh_requested;
+ bool bh_running;
+
+ int isr_overflow;
+ bool irq_requested; /* true if IRQ requested */
+ bool irq_occurred; /* for diagnostics use */
+
+ /* device configuration */
+
+ unsigned int bus_type;
+ unsigned int irq_level;
+ unsigned long irq_flags;
+
+ unsigned char __iomem * reg_addr; /* memory mapped registers address */
+ u32 phys_reg_addr;
+ bool reg_addr_requested;
+
+ MGSL_PARAMS params; /* communications parameters */
+ u32 idle_mode;
+ u32 max_frame_size; /* as set by device config */
+
+ unsigned int rbuf_fill_level;
+ unsigned int rx_pio;
+ unsigned int if_mode;
+ unsigned int base_clock;
+ unsigned int xsync;
+ unsigned int xctrl;
+
+ /* device status */
+
+ bool rx_enabled;
+ bool rx_restart;
+
+ bool tx_enabled;
+ bool tx_active;
+
+ unsigned char signals; /* serial signal states */
+ int init_error; /* initialization error */
+
+ unsigned char *tx_buf;
+ int tx_count;
+
+ char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+ char char_buf[MAX_ASYNC_BUFFER_SIZE];
+ bool drop_rts_on_tx_done;
+ struct _input_signal_events input_signal_events;
+
+ int dcd_chkcount; /* check counts to prevent */
+ int cts_chkcount; /* too many IRQs if a signal */
+ int dsr_chkcount; /* is floating */
+ int ri_chkcount;
+
+ char *bufs; /* virtual address of DMA buffer lists */
+ dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
+
+ unsigned int rbuf_count;
+ struct slgt_desc *rbufs;
+ unsigned int rbuf_current;
+ unsigned int rbuf_index;
+ unsigned int rbuf_fill_index;
+ unsigned short rbuf_fill_count;
+
+ unsigned int tbuf_count;
+ struct slgt_desc *tbufs;
+ unsigned int tbuf_current;
+ unsigned int tbuf_start;
+
+ unsigned char *tmp_rbuf;
+ unsigned int tmp_rbuf_count;
+
+ /* SPPP/Cisco HDLC device parts */
+
+ int netcount;
+ spinlock_t netlock;
+#if SYNCLINK_GENERIC_HDLC
+ struct net_device *netdev;
+#endif
+
+};
+
+static MGSL_PARAMS default_params = {
+ .mode = MGSL_MODE_HDLC,
+ .loopback = 0,
+ .flags = HDLC_FLAG_UNDERRUN_ABORT15,
+ .encoding = HDLC_ENCODING_NRZI_SPACE,
+ .clock_speed = 0,
+ .addr_filter = 0xff,
+ .crc_type = HDLC_CRC_16_CCITT,
+ .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
+ .preamble = HDLC_PREAMBLE_PATTERN_NONE,
+ .data_rate = 9600,
+ .data_bits = 8,
+ .stop_bits = 1,
+ .parity = ASYNC_PARITY_NONE
+};
+
+
+#define BH_RECEIVE 1
+#define BH_TRANSMIT 2
+#define BH_STATUS 4
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+#define DMABUFSIZE 256
+#define DESC_LIST_SIZE 4096
+
+#define MASK_PARITY BIT1
+#define MASK_FRAMING BIT0
+#define MASK_BREAK BIT14
+#define MASK_OVERRUN BIT4
+
+#define GSR 0x00 /* global status */
+#define JCR 0x04 /* JTAG control */
+#define IODR 0x08 /* GPIO direction */
+#define IOER 0x0c /* GPIO interrupt enable */
+#define IOVR 0x10 /* GPIO value */
+#define IOSR 0x14 /* GPIO interrupt status */
+#define TDR 0x80 /* tx data */
+#define RDR 0x80 /* rx data */
+#define TCR 0x82 /* tx control */
+#define TIR 0x84 /* tx idle */
+#define TPR 0x85 /* tx preamble */
+#define RCR 0x86 /* rx control */
+#define VCR 0x88 /* V.24 control */
+#define CCR 0x89 /* clock control */
+#define BDR 0x8a /* baud divisor */
+#define SCR 0x8c /* serial control */
+#define SSR 0x8e /* serial status */
+#define RDCSR 0x90 /* rx DMA control/status */
+#define TDCSR 0x94 /* tx DMA control/status */
+#define RDDAR 0x98 /* rx DMA descriptor address */
+#define TDDAR 0x9c /* tx DMA descriptor address */
+#define XSR 0x40 /* extended sync pattern */
+#define XCR 0x44 /* extended control */
+
+#define RXIDLE BIT14
+#define RXBREAK BIT14
+#define IRQ_TXDATA BIT13
+#define IRQ_TXIDLE BIT12
+#define IRQ_TXUNDER BIT11 /* HDLC */
+#define IRQ_RXDATA BIT10
+#define IRQ_RXIDLE BIT9 /* HDLC */
+#define IRQ_RXBREAK BIT9 /* async */
+#define IRQ_RXOVER BIT8
+#define IRQ_DSR BIT7
+#define IRQ_CTS BIT6
+#define IRQ_DCD BIT5
+#define IRQ_RI BIT4
+#define IRQ_ALL 0x3ff0
+#define IRQ_MASTER BIT0
+
+#define slgt_irq_on(info, mask) \
+ wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
+#define slgt_irq_off(info, mask) \
+ wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
+
+static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
+static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
+static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
+static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
+static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
+static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
+
+static void msc_set_vcr(struct slgt_info *info);
+
+static int startup(struct slgt_info *info);
+static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
+static void shutdown(struct slgt_info *info);
+static void program_hw(struct slgt_info *info);
+static void change_params(struct slgt_info *info);
+
+static int register_test(struct slgt_info *info);
+static int irq_test(struct slgt_info *info);
+static int loopback_test(struct slgt_info *info);
+static int adapter_test(struct slgt_info *info);
+
+static void reset_adapter(struct slgt_info *info);
+static void reset_port(struct slgt_info *info);
+static void async_mode(struct slgt_info *info);
+static void sync_mode(struct slgt_info *info);
+
+static void rx_stop(struct slgt_info *info);
+static void rx_start(struct slgt_info *info);
+static void reset_rbufs(struct slgt_info *info);
+static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
+static void rdma_reset(struct slgt_info *info);
+static bool rx_get_frame(struct slgt_info *info);
+static bool rx_get_buf(struct slgt_info *info);
+
+static void tx_start(struct slgt_info *info);
+static void tx_stop(struct slgt_info *info);
+static void tx_set_idle(struct slgt_info *info);
+static unsigned int free_tbuf_count(struct slgt_info *info);
+static unsigned int tbuf_bytes(struct slgt_info *info);
+static void reset_tbufs(struct slgt_info *info);
+static void tdma_reset(struct slgt_info *info);
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
+
+static void get_signals(struct slgt_info *info);
+static void set_signals(struct slgt_info *info);
+static void enable_loopback(struct slgt_info *info);
+static void set_rate(struct slgt_info *info, u32 data_rate);
+
+static int bh_action(struct slgt_info *info);
+static void bh_handler(struct work_struct *work);
+static void bh_transmit(struct slgt_info *info);
+static void isr_serial(struct slgt_info *info);
+static void isr_rdma(struct slgt_info *info);
+static void isr_txeom(struct slgt_info *info, unsigned short status);
+static void isr_tdma(struct slgt_info *info);
+
+static int alloc_dma_bufs(struct slgt_info *info);
+static void free_dma_bufs(struct slgt_info *info);
+static int alloc_desc(struct slgt_info *info);
+static void free_desc(struct slgt_info *info);
+static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
+static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
+
+static int alloc_tmp_rbuf(struct slgt_info *info);
+static void free_tmp_rbuf(struct slgt_info *info);
+
+static void tx_timeout(unsigned long context);
+static void rx_timeout(unsigned long context);
+
+/*
+ * ioctl handlers
+ */
+static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
+static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
+static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
+static int get_txidle(struct slgt_info *info, int __user *idle_mode);
+static int set_txidle(struct slgt_info *info, int idle_mode);
+static int tx_enable(struct slgt_info *info, int enable);
+static int tx_abort(struct slgt_info *info);
+static int rx_enable(struct slgt_info *info, int enable);
+static int modem_input_wait(struct slgt_info *info,int arg);
+static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
+static int tiocmget(struct tty_struct *tty);
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+static int set_break(struct tty_struct *tty, int break_state);
+static int get_interface(struct slgt_info *info, int __user *if_mode);
+static int set_interface(struct slgt_info *info, int if_mode);
+static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
+static int get_xsync(struct slgt_info *info, int __user *if_mode);
+static int set_xsync(struct slgt_info *info, int if_mode);
+static int get_xctrl(struct slgt_info *info, int __user *if_mode);
+static int set_xctrl(struct slgt_info *info, int if_mode);
+
+/*
+ * driver functions
+ */
+static void add_device(struct slgt_info *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int claim_resources(struct slgt_info *info);
+static void release_resources(struct slgt_info *info);
+
+/*
+ * DEBUG OUTPUT CODE
+ */
+#ifndef DBGINFO
+#define DBGINFO(fmt)
+#endif
+#ifndef DBGERR
+#define DBGERR(fmt)
+#endif
+#ifndef DBGBH
+#define DBGBH(fmt)
+#endif
+#ifndef DBGISR
+#define DBGISR(fmt)
+#endif
+
+#ifdef DBGDATA
+static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
+{
+ int i;
+ int linecount;
+ printk("%s %s data:\n",info->device_name, label);
+ while(count) {
+ linecount = (count > 16) ? 16 : count;
+ for(i=0; i < linecount; i++)
+ printk("%02X ",(unsigned char)data[i]);
+ for(;i<17;i++)
+ printk(" ");
+ for(i=0;i<linecount;i++) {
+ if (data[i]>=040 && data[i]<=0176)
+ printk("%c",data[i]);
+ else
+ printk(".");
+ }
+ printk("\n");
+ data += linecount;
+ count -= linecount;
+ }
+}
+#else
+#define DBGDATA(info, buf, size, label)
+#endif
+
+#ifdef DBGTBUF
+static void dump_tbufs(struct slgt_info *info)
+{
+ int i;
+ printk("tbuf_current=%d\n", info->tbuf_current);
+ for (i=0 ; i < info->tbuf_count ; i++) {
+ printk("%d: count=%04X status=%04X\n",
+ i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
+ }
+}
+#else
+#define DBGTBUF(info)
+#endif
+
+#ifdef DBGRBUF
+static void dump_rbufs(struct slgt_info *info)
+{
+ int i;
+ printk("rbuf_current=%d\n", info->rbuf_current);
+ for (i=0 ; i < info->rbuf_count ; i++) {
+ printk("%d: count=%04X status=%04X\n",
+ i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
+ }
+}
+#else
+#define DBGRBUF(info)
+#endif
+
+static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
+{
+#ifdef SANITY_CHECK
+ if (!info) {
+ printk("null struct slgt_info for (%s) in %s\n", devname, name);
+ return 1;
+ }
+ if (info->magic != MGSL_MAGIC) {
+ printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
+ return 1;
+ }
+#else
+ if (!info)
+ return 1;
+#endif
+ return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf - pass receive data to line discipline
+ */
+static void ldisc_receive_buf(struct tty_struct *tty,
+ const __u8 *data, char *flags, int count)
+{
+ struct tty_ldisc *ld;
+ if (!tty)
+ return;
+ ld = tty_ldisc_ref(tty);
+ if (ld) {
+ if (ld->ops->receive_buf)
+ ld->ops->receive_buf(tty, data, flags, count);
+ tty_ldisc_deref(ld);
+ }
+}
+
+/* tty callbacks */
+
+static int open(struct tty_struct *tty, struct file *filp)
+{
+ struct slgt_info *info;
+ int retval, line;
+ unsigned long flags;
+
+ line = tty->index;
+ if ((line < 0) || (line >= slgt_device_count)) {
+ DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
+ return -ENODEV;
+ }
+
+ info = slgt_device_list;
+ while(info && info->line != line)
+ info = info->next_device;
+ if (sanity_check(info, tty->name, "open"))
+ return -ENODEV;
+ if (info->init_error) {
+ DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
+ return -ENODEV;
+ }
+
+ tty->driver_data = info;
+ info->port.tty = tty;
+
+ DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
+
+ /* If port is closing, signal caller to try again */
+ if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+ if (info->port.flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->port.close_wait);
+ retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+ goto cleanup;
+ }
+
+ mutex_lock(&info->port.mutex);
+ info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->netcount) {
+ retval = -EBUSY;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ mutex_unlock(&info->port.mutex);
+ goto cleanup;
+ }
+ info->port.count++;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ if (info->port.count == 1) {
+ /* 1st open on this device, init hardware */
+ retval = startup(info);
+ if (retval < 0) {
+ mutex_unlock(&info->port.mutex);
+ goto cleanup;
+ }
+ }
+ mutex_unlock(&info->port.mutex);
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+ DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
+ goto cleanup;
+ }
+
+ retval = 0;
+
+cleanup:
+ if (retval) {
+ if (tty->count == 1)
+ info->port.tty = NULL; /* tty layer will release tty struct */
+ if(info->port.count)
+ info->port.count--;
+ }
+
+ DBGINFO(("%s open rc=%d\n", info->device_name, retval));
+ return retval;
+}
+
+static void close(struct tty_struct *tty, struct file *filp)
+{
+ struct slgt_info *info = tty->driver_data;
+
+ if (sanity_check(info, tty->name, "close"))
+ return;
+ DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
+
+ if (tty_port_close_start(&info->port, tty, filp) == 0)
+ goto cleanup;
+
+ mutex_lock(&info->port.mutex);
+ if (info->port.flags & ASYNC_INITIALIZED)
+ wait_until_sent(tty, info->timeout);
+ flush_buffer(tty);
+ tty_ldisc_flush(tty);
+
+ shutdown(info);
+ mutex_unlock(&info->port.mutex);
+
+ tty_port_close_end(&info->port, tty);
+ info->port.tty = NULL;
+cleanup:
+ DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
+}
+
+static void hangup(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "hangup"))
+ return;
+ DBGINFO(("%s hangup\n", info->device_name));
+
+ flush_buffer(tty);
+
+ mutex_lock(&info->port.mutex);
+ shutdown(info);
+
+ spin_lock_irqsave(&info->port.lock, flags);
+ info->port.count = 0;
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->port.tty = NULL;
+ spin_unlock_irqrestore(&info->port.lock, flags);
+ mutex_unlock(&info->port.mutex);
+
+ wake_up_interruptible(&info->port.open_wait);
+}
+
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ DBGINFO(("%s set_termios\n", tty->driver->name));
+
+ change_params(info);
+
+ /* Handle transition to B0 status */
+ if (old_termios->c_cflag & CBAUD &&
+ !(tty->termios->c_cflag & CBAUD)) {
+ info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ tty->termios->c_cflag & CBAUD) {
+ info->signals |= SerialSignal_DTR;
+ if (!(tty->termios->c_cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags)) {
+ info->signals |= SerialSignal_RTS;
+ }
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if (old_termios->c_cflag & CRTSCTS &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ tx_release(tty);
+ }
+}
+
+static void update_tx_timer(struct slgt_info *info)
+{
+ /*
+ * use worst case speed of 1200bps to calculate transmit timeout
+ * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
+ */
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ int timeout = (tbuf_bytes(info) * 7) + 1000;
+ mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
+ }
+}
+
+static int write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ int ret = 0;
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "write"))
+ return -EIO;
+
+ DBGINFO(("%s write count=%d\n", info->device_name, count));
+
+ if (!info->tx_buf || (count > info->max_frame_size))
+ return -EIO;
+
+ if (!count || tty->stopped || tty->hw_stopped)
+ return 0;
+
+ spin_lock_irqsave(&info->lock, flags);
+
+ if (info->tx_count) {
+ /* send accumulated data from send_char() */
+ if (!tx_load(info, info->tx_buf, info->tx_count))
+ goto cleanup;
+ info->tx_count = 0;
+ }
+
+ if (tx_load(info, buf, count))
+ ret = count;
+
+cleanup:
+ spin_unlock_irqrestore(&info->lock, flags);
+ DBGINFO(("%s write rc=%d\n", info->device_name, ret));
+ return ret;
+}
+
+static int put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+ int ret = 0;
+
+ if (sanity_check(info, tty->name, "put_char"))
+ return 0;
+ DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
+ if (!info->tx_buf)
+ return 0;
+ spin_lock_irqsave(&info->lock,flags);
+ if (info->tx_count < info->max_frame_size) {
+ info->tx_buf[info->tx_count++] = ch;
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return ret;
+}
+
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "send_xchar"))
+ return;
+ DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
+ info->x_char = ch;
+ if (ch) {
+ spin_lock_irqsave(&info->lock,flags);
+ if (!info->tx_enabled)
+ tx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+
+ if (!info )
+ return;
+ if (sanity_check(info, tty->name, "wait_until_sent"))
+ return;
+ DBGINFO(("%s wait_until_sent entry\n", info->device_name));
+ if (!(info->port.flags & ASYNC_INITIALIZED))
+ goto exit;
+
+ orig_jiffies = jiffies;
+
+ /* Set check interval to 1/5 of estimated time to
+ * send a character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ * Note: use tight timings here to satisfy the NIST-PCTS.
+ */
+
+ if (info->params.data_rate) {
+ char_time = info->timeout/(32 * 5);
+ if (!char_time)
+ char_time++;
+ } else
+ char_time = 1;
+
+ if (timeout)
+ char_time = min_t(unsigned long, char_time, timeout);
+
+ while (info->tx_active) {
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+exit:
+ DBGINFO(("%s wait_until_sent exit\n", info->device_name));
+}
+
+static int write_room(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ int ret;
+
+ if (sanity_check(info, tty->name, "write_room"))
+ return 0;
+ ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
+ DBGINFO(("%s write_room=%d\n", info->device_name, ret));
+ return ret;
+}
+
+static void flush_chars(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "flush_chars"))
+ return;
+ DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
+
+ if (info->tx_count <= 0 || tty->stopped ||
+ tty->hw_stopped || !info->tx_buf)
+ return;
+
+ DBGINFO(("%s flush_chars start transmit\n", info->device_name));
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+ info->tx_count = 0;
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+static void flush_buffer(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "flush_buffer"))
+ return;
+ DBGINFO(("%s flush_buffer\n", info->device_name));
+
+ spin_lock_irqsave(&info->lock, flags);
+ info->tx_count = 0;
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ tty_wakeup(tty);
+}
+
+/*
+ * throttle (stop) transmitter
+ */
+static void tx_hold(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "tx_hold"))
+ return;
+ DBGINFO(("%s tx_hold\n", info->device_name));
+ spin_lock_irqsave(&info->lock,flags);
+ if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
+ tx_stop(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/*
+ * release (start) transmitter
+ */
+static void tx_release(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "tx_release"))
+ return;
+ DBGINFO(("%s tx_release\n", info->device_name));
+ spin_lock_irqsave(&info->lock, flags);
+ if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
+ info->tx_count = 0;
+ spin_unlock_irqrestore(&info->lock, flags);
+}
+
+/*
+ * Service an IOCTL request
+ *
+ * Arguments
+ *
+ * tty pointer to tty instance data
+ * cmd IOCTL command code
+ * arg command argument/context
+ *
+ * Return 0 if success, otherwise error code
+ */
+static int ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct slgt_info *info = tty->driver_data;
+ void __user *argp = (void __user *)arg;
+ int ret;
+
+ if (sanity_check(info, tty->name, "ioctl"))
+ return -ENODEV;
+ DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCMIWAIT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case MGSL_IOCWAITEVENT:
+ return wait_mgsl_event(info, argp);
+ case TIOCMIWAIT:
+ return modem_input_wait(info,(int)arg);
+ case MGSL_IOCSGPIO:
+ return set_gpio(info, argp);
+ case MGSL_IOCGGPIO:
+ return get_gpio(info, argp);
+ case MGSL_IOCWAITGPIO:
+ return wait_gpio(info, argp);
+ case MGSL_IOCGXSYNC:
+ return get_xsync(info, argp);
+ case MGSL_IOCSXSYNC:
+ return set_xsync(info, (int)arg);
+ case MGSL_IOCGXCTRL:
+ return get_xctrl(info, argp);
+ case MGSL_IOCSXCTRL:
+ return set_xctrl(info, (int)arg);
+ }
+ mutex_lock(&info->port.mutex);
+ switch (cmd) {
+ case MGSL_IOCGPARAMS:
+ ret = get_params(info, argp);
+ break;
+ case MGSL_IOCSPARAMS:
+ ret = set_params(info, argp);
+ break;
+ case MGSL_IOCGTXIDLE:
+ ret = get_txidle(info, argp);
+ break;
+ case MGSL_IOCSTXIDLE:
+ ret = set_txidle(info, (int)arg);
+ break;
+ case MGSL_IOCTXENABLE:
+ ret = tx_enable(info, (int)arg);
+ break;
+ case MGSL_IOCRXENABLE:
+ ret = rx_enable(info, (int)arg);
+ break;
+ case MGSL_IOCTXABORT:
+ ret = tx_abort(info);
+ break;
+ case MGSL_IOCGSTATS:
+ ret = get_stats(info, argp);
+ break;
+ case MGSL_IOCGIF:
+ ret = get_interface(info, argp);
+ break;
+ case MGSL_IOCSIF:
+ ret = set_interface(info,(int)arg);
+ break;
+ default:
+ ret = -ENOIOCTLCMD;
+ }
+ mutex_unlock(&info->port.mutex);
+ return ret;
+}
+
+static int get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+
+{
+ struct slgt_info *info = tty->driver_data;
+ struct mgsl_icount cnow; /* kernel counter temps */
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ icount->cts = cnow.cts;
+ icount->dsr = cnow.dsr;
+ icount->rng = cnow.rng;
+ icount->dcd = cnow.dcd;
+ icount->rx = cnow.rx;
+ icount->tx = cnow.tx;
+ icount->frame = cnow.frame;
+ icount->overrun = cnow.overrun;
+ icount->parity = cnow.parity;
+ icount->brk = cnow.brk;
+ icount->buf_overrun = cnow.buf_overrun;
+
+ return 0;
+}
+
+/*
+ * support for 32 bit ioctl calls on 64 bit systems
+ */
+#ifdef CONFIG_COMPAT
+static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
+{
+ struct MGSL_PARAMS32 tmp_params;
+
+ DBGINFO(("%s get_params32\n", info->device_name));
+ memset(&tmp_params, 0, sizeof(tmp_params));
+ tmp_params.mode = (compat_ulong_t)info->params.mode;
+ tmp_params.loopback = info->params.loopback;
+ tmp_params.flags = info->params.flags;
+ tmp_params.encoding = info->params.encoding;
+ tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
+ tmp_params.addr_filter = info->params.addr_filter;
+ tmp_params.crc_type = info->params.crc_type;
+ tmp_params.preamble_length = info->params.preamble_length;
+ tmp_params.preamble = info->params.preamble;
+ tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
+ tmp_params.data_bits = info->params.data_bits;
+ tmp_params.stop_bits = info->params.stop_bits;
+ tmp_params.parity = info->params.parity;
+ if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
+ return -EFAULT;
+ return 0;
+}
+
+static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
+{
+ struct MGSL_PARAMS32 tmp_params;
+
+ DBGINFO(("%s set_params32\n", info->device_name));
+ if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
+ return -EFAULT;
+
+ spin_lock(&info->lock);
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
+ info->base_clock = tmp_params.clock_speed;
+ } else {
+ info->params.mode = tmp_params.mode;
+ info->params.loopback = tmp_params.loopback;
+ info->params.flags = tmp_params.flags;
+ info->params.encoding = tmp_params.encoding;
+ info->params.clock_speed = tmp_params.clock_speed;
+ info->params.addr_filter = tmp_params.addr_filter;
+ info->params.crc_type = tmp_params.crc_type;
+ info->params.preamble_length = tmp_params.preamble_length;
+ info->params.preamble = tmp_params.preamble;
+ info->params.data_rate = tmp_params.data_rate;
+ info->params.data_bits = tmp_params.data_bits;
+ info->params.stop_bits = tmp_params.stop_bits;
+ info->params.parity = tmp_params.parity;
+ }
+ spin_unlock(&info->lock);
+
+ program_hw(info);
+
+ return 0;
+}
+
+static long slgt_compat_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct slgt_info *info = tty->driver_data;
+ int rc = -ENOIOCTLCMD;
+
+ if (sanity_check(info, tty->name, "compat_ioctl"))
+ return -ENODEV;
+ DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
+
+ switch (cmd) {
+
+ case MGSL_IOCSPARAMS32:
+ rc = set_params32(info, compat_ptr(arg));
+ break;
+
+ case MGSL_IOCGPARAMS32:
+ rc = get_params32(info, compat_ptr(arg));
+ break;
+
+ case MGSL_IOCGPARAMS:
+ case MGSL_IOCSPARAMS:
+ case MGSL_IOCGTXIDLE:
+ case MGSL_IOCGSTATS:
+ case MGSL_IOCWAITEVENT:
+ case MGSL_IOCGIF:
+ case MGSL_IOCSGPIO:
+ case MGSL_IOCGGPIO:
+ case MGSL_IOCWAITGPIO:
+ case MGSL_IOCGXSYNC:
+ case MGSL_IOCGXCTRL:
+ case MGSL_IOCSTXIDLE:
+ case MGSL_IOCTXENABLE:
+ case MGSL_IOCRXENABLE:
+ case MGSL_IOCTXABORT:
+ case TIOCMIWAIT:
+ case MGSL_IOCSIF:
+ case MGSL_IOCSXSYNC:
+ case MGSL_IOCSXCTRL:
+ rc = ioctl(tty, cmd, arg);
+ break;
+ }
+
+ DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
+ return rc;
+}
+#else
+#define slgt_compat_ioctl NULL
+#endif /* ifdef CONFIG_COMPAT */
+
+/*
+ * proc fs support
+ */
+static inline void line_info(struct seq_file *m, struct slgt_info *info)
+{
+ char stat_buf[30];
+ unsigned long flags;
+
+ seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
+ info->device_name, info->phys_reg_addr,
+ info->irq_level, info->max_frame_size);
+
+ /* output current serial signal states */
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if (info->signals & SerialSignal_RTS)
+ strcat(stat_buf, "|RTS");
+ if (info->signals & SerialSignal_CTS)
+ strcat(stat_buf, "|CTS");
+ if (info->signals & SerialSignal_DTR)
+ strcat(stat_buf, "|DTR");
+ if (info->signals & SerialSignal_DSR)
+ strcat(stat_buf, "|DSR");
+ if (info->signals & SerialSignal_DCD)
+ strcat(stat_buf, "|CD");
+ if (info->signals & SerialSignal_RI)
+ strcat(stat_buf, "|RI");
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ seq_printf(m, "\tHDLC txok:%d rxok:%d",
+ info->icount.txok, info->icount.rxok);
+ if (info->icount.txunder)
+ seq_printf(m, " txunder:%d", info->icount.txunder);
+ if (info->icount.txabort)
+ seq_printf(m, " txabort:%d", info->icount.txabort);
+ if (info->icount.rxshort)
+ seq_printf(m, " rxshort:%d", info->icount.rxshort);
+ if (info->icount.rxlong)
+ seq_printf(m, " rxlong:%d", info->icount.rxlong);
+ if (info->icount.rxover)
+ seq_printf(m, " rxover:%d", info->icount.rxover);
+ if (info->icount.rxcrc)
+ seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
+ } else {
+ seq_printf(m, "\tASYNC tx:%d rx:%d",
+ info->icount.tx, info->icount.rx);
+ if (info->icount.frame)
+ seq_printf(m, " fe:%d", info->icount.frame);
+ if (info->icount.parity)
+ seq_printf(m, " pe:%d", info->icount.parity);
+ if (info->icount.brk)
+ seq_printf(m, " brk:%d", info->icount.brk);
+ if (info->icount.overrun)
+ seq_printf(m, " oe:%d", info->icount.overrun);
+ }
+
+ /* Append serial signal status to end */
+ seq_printf(m, " %s\n", stat_buf+1);
+
+ seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+ info->tx_active,info->bh_requested,info->bh_running,
+ info->pending_bh);
+}
+
+/* Called to print information about devices
+ */
+static int synclink_gt_proc_show(struct seq_file *m, void *v)
+{
+ struct slgt_info *info;
+
+ seq_puts(m, "synclink_gt driver\n");
+
+ info = slgt_device_list;
+ while( info ) {
+ line_info(m, info);
+ info = info->next_device;
+ }
+ return 0;
+}
+
+static int synclink_gt_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, synclink_gt_proc_show, NULL);
+}
+
+static const struct file_operations synclink_gt_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = synclink_gt_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * return count of bytes in transmit buffer
+ */
+static int chars_in_buffer(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ int count;
+ if (sanity_check(info, tty->name, "chars_in_buffer"))
+ return 0;
+ count = tbuf_bytes(info);
+ DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
+ return count;
+}
+
+/*
+ * signal remote device to throttle send data (our receive data)
+ */
+static void throttle(struct tty_struct * tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "throttle"))
+ return;
+ DBGINFO(("%s throttle\n", info->device_name));
+ if (I_IXOFF(tty))
+ send_xchar(tty, STOP_CHAR(tty));
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->lock,flags);
+ info->signals &= ~SerialSignal_RTS;
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+/*
+ * signal remote device to stop throttling send data (our receive data)
+ */
+static void unthrottle(struct tty_struct * tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "unthrottle"))
+ return;
+ DBGINFO(("%s unthrottle\n", info->device_name));
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ send_xchar(tty, START_CHAR(tty));
+ }
+ if (tty->termios->c_cflag & CRTSCTS) {
+ spin_lock_irqsave(&info->lock,flags);
+ info->signals |= SerialSignal_RTS;
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+}
+
+/*
+ * set or clear transmit break condition
+ * break_state -1=set break condition, 0=clear
+ */
+static int set_break(struct tty_struct *tty, int break_state)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned short value;
+ unsigned long flags;
+
+ if (sanity_check(info, tty->name, "set_break"))
+ return -EINVAL;
+ DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
+
+ spin_lock_irqsave(&info->lock,flags);
+ value = rd_reg16(info, TCR);
+ if (break_state == -1)
+ value |= BIT6;
+ else
+ value &= ~BIT6;
+ wr_reg16(info, TCR, value);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+#if SYNCLINK_GENERIC_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev pointer to network device structure
+ * encoding serial encoding setting
+ * parity FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+ unsigned short parity)
+{
+ struct slgt_info *info = dev_to_port(dev);
+ unsigned char new_encoding;
+ unsigned short new_crctype;
+
+ /* return error if TTY interface open */
+ if (info->port.count)
+ return -EBUSY;
+
+ DBGINFO(("%s hdlcdev_attach\n", info->device_name));
+
+ switch (encoding)
+ {
+ case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
+ case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+ case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+ case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+ case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+ default: return -EINVAL;
+ }
+
+ switch (parity)
+ {
+ case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
+ case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+ case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+ default: return -EINVAL;
+ }
+
+ info->params.encoding = new_encoding;
+ info->params.crc_type = new_crctype;
+
+ /* if network interface up, reprogram hardware */
+ if (info->netcount)
+ program_hw(info);
+
+ return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb socket buffer containing HDLC frame
+ * dev pointer to network device structure
+ */
+static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct slgt_info *info = dev_to_port(dev);
+ unsigned long flags;
+
+ DBGINFO(("%s hdlc_xmit\n", dev->name));
+
+ if (!skb->len)
+ return NETDEV_TX_OK;
+
+ /* stop sending until this frame completes */
+ netif_stop_queue(dev);
+
+ /* update network statistics */
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ /* save start time for transmit timeout detection */
+ dev->trans_start = jiffies;
+
+ spin_lock_irqsave(&info->lock, flags);
+ tx_load(info, skb->data, skb->len);
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ /* done with socket buffer, so free it */
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+ struct slgt_info *info = dev_to_port(dev);
+ int rc;
+ unsigned long flags;
+
+ if (!try_module_get(THIS_MODULE))
+ return -EBUSY;
+
+ DBGINFO(("%s hdlcdev_open\n", dev->name));
+
+ /* generic HDLC layer open processing */
+ if ((rc = hdlc_open(dev)))
+ return rc;
+
+ /* arbitrate between network and tty opens */
+ spin_lock_irqsave(&info->netlock, flags);
+ if (info->port.count != 0 || info->netcount != 0) {
+ DBGINFO(("%s hdlc_open busy\n", dev->name));
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return -EBUSY;
+ }
+ info->netcount=1;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ /* claim resources and init adapter */
+ if ((rc = startup(info)) != 0) {
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ spin_unlock_irqrestore(&info->netlock, flags);
+ return rc;
+ }
+
+ /* assert DTR and RTS, apply hardware settings */
+ info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ program_hw(info);
+
+ /* enable network layer transmit */
+ dev->trans_start = jiffies;
+ netif_start_queue(dev);
+
+ /* inform generic HDLC layer of current DCD status */
+ spin_lock_irqsave(&info->lock, flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock, flags);
+ if (info->signals & SerialSignal_DCD)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+ struct slgt_info *info = dev_to_port(dev);
+ unsigned long flags;
+
+ DBGINFO(("%s hdlcdev_close\n", dev->name));
+
+ netif_stop_queue(dev);
+
+ /* shutdown adapter and release resources */
+ shutdown(info);
+
+ hdlc_close(dev);
+
+ spin_lock_irqsave(&info->netlock, flags);
+ info->netcount=0;
+ spin_unlock_irqrestore(&info->netlock, flags);
+
+ module_put(THIS_MODULE);
+ return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev pointer to network device structure
+ * ifr pointer to network interface request structure
+ * cmd IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ struct slgt_info *info = dev_to_port(dev);
+ unsigned int flags;
+
+ DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
+
+ /* return error if TTY interface open */
+ if (info->port.count)
+ return -EBUSY;
+
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ memset(&new_line, 0, sizeof(new_line));
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE: /* return current sync_serial_settings */
+
+ ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+
+ flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+
+ switch (flags){
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+ case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
+ case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+ default: new_line.clock_type = CLOCK_DEFAULT;
+ }
+
+ new_line.clock_rate = info->params.clock_speed;
+ new_line.loopback = info->params.loopback ? 1:0;
+
+ if (copy_to_user(line, &new_line, size))
+ return -EFAULT;
+ return 0;
+
+ case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ switch (new_line.clock_type)
+ {
+ case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+ case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+ case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
+ case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
+ case CLOCK_DEFAULT: flags = info->params.flags &
+ (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
+ default: return -EINVAL;
+ }
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+ HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
+ HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+ HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
+ info->params.flags |= flags;
+
+ info->params.loopback = new_line.loopback;
+
+ if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+ info->params.clock_speed = new_line.clock_rate;
+ else
+ info->params.clock_speed = 0;
+
+ /* if network interface up, reprogram hardware */
+ if (info->netcount)
+ program_hw(info);
+ return 0;
+
+ default:
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+ struct slgt_info *info = dev_to_port(dev);
+ unsigned long flags;
+
+ DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
+
+ dev->stats.tx_errors++;
+ dev->stats.tx_aborted_errors++;
+
+ spin_lock_irqsave(&info->lock,flags);
+ tx_stop(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info pointer to device instance information
+ */
+static void hdlcdev_tx_done(struct slgt_info *info)
+{
+ if (netif_queue_stopped(info->netdev))
+ netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info pointer to device instance information
+ * buf pointer to buffer contianing frame data
+ * size count of data bytes in buf
+ */
+static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
+{
+ struct sk_buff *skb = dev_alloc_skb(size);
+ struct net_device *dev = info->netdev;
+
+ DBGINFO(("%s hdlcdev_rx\n", dev->name));
+
+ if (skb == NULL) {
+ DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
+ dev->stats.rx_dropped++;
+ return;
+ }
+
+ memcpy(skb_put(skb, size), buf, size);
+
+ skb->protocol = hdlc_type_trans(skb, dev);
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += size;
+
+ netif_rx(skb);
+}
+
+static const struct net_device_ops hdlcdev_ops = {
+ .ndo_open = hdlcdev_open,
+ .ndo_stop = hdlcdev_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = hdlcdev_ioctl,
+ .ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(struct slgt_info *info)
+{
+ int rc;
+ struct net_device *dev;
+ hdlc_device *hdlc;
+
+ /* allocate and initialize network and HDLC layer objects */
+
+ if (!(dev = alloc_hdlcdev(info))) {
+ printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
+ return -ENOMEM;
+ }
+
+ /* for network layer reporting purposes only */
+ dev->mem_start = info->phys_reg_addr;
+ dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
+ dev->irq = info->irq_level;
+
+ /* network layer callbacks and settings */
+ dev->netdev_ops = &hdlcdev_ops;
+ dev->watchdog_timeo = 10 * HZ;
+ dev->tx_queue_len = 50;
+
+ /* generic HDLC layer callbacks and settings */
+ hdlc = dev_to_hdlc(dev);
+ hdlc->attach = hdlcdev_attach;
+ hdlc->xmit = hdlcdev_xmit;
+
+ /* register objects with HDLC layer */
+ if ((rc = register_hdlc_device(dev))) {
+ printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+ free_netdev(dev);
+ return rc;
+ }
+
+ info->netdev = dev;
+ return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info pointer to device instance information
+ */
+static void hdlcdev_exit(struct slgt_info *info)
+{
+ unregister_hdlc_device(info->netdev);
+ free_netdev(info->netdev);
+ info->netdev = NULL;
+}
+
+#endif /* ifdef CONFIG_HDLC */
+
+/*
+ * get async data from rx DMA buffers
+ */
+static void rx_async(struct slgt_info *info)
+{
+ struct tty_struct *tty = info->port.tty;
+ struct mgsl_icount *icount = &info->icount;
+ unsigned int start, end;
+ unsigned char *p;
+ unsigned char status;
+ struct slgt_desc *bufs = info->rbufs;
+ int i, count;
+ int chars = 0;
+ int stat;
+ unsigned char ch;
+
+ start = end = info->rbuf_current;
+
+ while(desc_complete(bufs[end])) {
+ count = desc_count(bufs[end]) - info->rbuf_index;
+ p = bufs[end].buf + info->rbuf_index;
+
+ DBGISR(("%s rx_async count=%d\n", info->device_name, count));
+ DBGDATA(info, p, count, "rx");
+
+ for(i=0 ; i < count; i+=2, p+=2) {
+ ch = *p;
+ icount->rx++;
+
+ stat = 0;
+
+ if ((status = *(p+1) & (BIT1 + BIT0))) {
+ if (status & BIT1)
+ icount->parity++;
+ else if (status & BIT0)
+ icount->frame++;
+ /* discard char if tty control flags say so */
+ if (status & info->ignore_status_mask)
+ continue;
+ if (status & BIT1)
+ stat = TTY_PARITY;
+ else if (status & BIT0)
+ stat = TTY_FRAME;
+ }
+ if (tty) {
+ tty_insert_flip_char(tty, ch, stat);
+ chars++;
+ }
+ }
+
+ if (i < count) {
+ /* receive buffer not completed */
+ info->rbuf_index += i;
+ mod_timer(&info->rx_timer, jiffies + 1);
+ break;
+ }
+
+ info->rbuf_index = 0;
+ free_rbufs(info, end, end);
+
+ if (++end == info->rbuf_count)
+ end = 0;
+
+ /* if entire list searched then no frame available */
+ if (end == start)
+ break;
+ }
+
+ if (tty && chars)
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * return next bottom half action to perform
+ */
+static int bh_action(struct slgt_info *info)
+{
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ if (info->pending_bh & BH_RECEIVE) {
+ info->pending_bh &= ~BH_RECEIVE;
+ rc = BH_RECEIVE;
+ } else if (info->pending_bh & BH_TRANSMIT) {
+ info->pending_bh &= ~BH_TRANSMIT;
+ rc = BH_TRANSMIT;
+ } else if (info->pending_bh & BH_STATUS) {
+ info->pending_bh &= ~BH_STATUS;
+ rc = BH_STATUS;
+ } else {
+ /* Mark BH routine as complete */
+ info->bh_running = false;
+ info->bh_requested = false;
+ rc = 0;
+ }
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ return rc;
+}
+
+/*
+ * perform bottom half processing
+ */
+static void bh_handler(struct work_struct *work)
+{
+ struct slgt_info *info = container_of(work, struct slgt_info, task);
+ int action;
+
+ if (!info)
+ return;
+ info->bh_running = true;
+
+ while((action = bh_action(info))) {
+ switch (action) {
+ case BH_RECEIVE:
+ DBGBH(("%s bh receive\n", info->device_name));
+ switch(info->params.mode) {
+ case MGSL_MODE_ASYNC:
+ rx_async(info);
+ break;
+ case MGSL_MODE_HDLC:
+ while(rx_get_frame(info));
+ break;
+ case MGSL_MODE_RAW:
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
+ case MGSL_MODE_XSYNC:
+ while(rx_get_buf(info));
+ break;
+ }
+ /* restart receiver if rx DMA buffers exhausted */
+ if (info->rx_restart)
+ rx_start(info);
+ break;
+ case BH_TRANSMIT:
+ bh_transmit(info);
+ break;
+ case BH_STATUS:
+ DBGBH(("%s bh status\n", info->device_name));
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+ break;
+ default:
+ DBGBH(("%s unknown action\n", info->device_name));
+ break;
+ }
+ }
+ DBGBH(("%s bh_handler exit\n", info->device_name));
+}
+
+static void bh_transmit(struct slgt_info *info)
+{
+ struct tty_struct *tty = info->port.tty;
+
+ DBGBH(("%s bh_transmit\n", info->device_name));
+ if (tty)
+ tty_wakeup(tty);
+}
+
+static void dsr_change(struct slgt_info *info, unsigned short status)
+{
+ if (status & BIT3) {
+ info->signals |= SerialSignal_DSR;
+ info->input_signal_events.dsr_up++;
+ } else {
+ info->signals &= ~SerialSignal_DSR;
+ info->input_signal_events.dsr_down++;
+ }
+ DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
+ if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+ slgt_irq_off(info, IRQ_DSR);
+ return;
+ }
+ info->icount.dsr++;
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+ info->pending_bh |= BH_STATUS;
+}
+
+static void cts_change(struct slgt_info *info, unsigned short status)
+{
+ if (status & BIT2) {
+ info->signals |= SerialSignal_CTS;
+ info->input_signal_events.cts_up++;
+ } else {
+ info->signals &= ~SerialSignal_CTS;
+ info->input_signal_events.cts_down++;
+ }
+ DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
+ if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+ slgt_irq_off(info, IRQ_CTS);
+ return;
+ }
+ info->icount.cts++;
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+ info->pending_bh |= BH_STATUS;
+
+ if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (info->port.tty) {
+ if (info->port.tty->hw_stopped) {
+ if (info->signals & SerialSignal_CTS) {
+ info->port.tty->hw_stopped = 0;
+ info->pending_bh |= BH_TRANSMIT;
+ return;
+ }
+ } else {
+ if (!(info->signals & SerialSignal_CTS))
+ info->port.tty->hw_stopped = 1;
+ }
+ }
+ }
+}
+
+static void dcd_change(struct slgt_info *info, unsigned short status)
+{
+ if (status & BIT1) {
+ info->signals |= SerialSignal_DCD;
+ info->input_signal_events.dcd_up++;
+ } else {
+ info->signals &= ~SerialSignal_DCD;
+ info->input_signal_events.dcd_down++;
+ }
+ DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
+ if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+ slgt_irq_off(info, IRQ_DCD);
+ return;
+ }
+ info->icount.dcd++;
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount) {
+ if (info->signals & SerialSignal_DCD)
+ netif_carrier_on(info->netdev);
+ else
+ netif_carrier_off(info->netdev);
+ }
+#endif
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+ info->pending_bh |= BH_STATUS;
+
+ if (info->port.flags & ASYNC_CHECK_CD) {
+ if (info->signals & SerialSignal_DCD)
+ wake_up_interruptible(&info->port.open_wait);
+ else {
+ if (info->port.tty)
+ tty_hangup(info->port.tty);
+ }
+ }
+}
+
+static void ri_change(struct slgt_info *info, unsigned short status)
+{
+ if (status & BIT0) {
+ info->signals |= SerialSignal_RI;
+ info->input_signal_events.ri_up++;
+ } else {
+ info->signals &= ~SerialSignal_RI;
+ info->input_signal_events.ri_down++;
+ }
+ DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
+ if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
+ slgt_irq_off(info, IRQ_RI);
+ return;
+ }
+ info->icount.rng++;
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+ info->pending_bh |= BH_STATUS;
+}
+
+static void isr_rxdata(struct slgt_info *info)
+{
+ unsigned int count = info->rbuf_fill_count;
+ unsigned int i = info->rbuf_fill_index;
+ unsigned short reg;
+
+ while (rd_reg16(info, SSR) & IRQ_RXDATA) {
+ reg = rd_reg16(info, RDR);
+ DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
+ if (desc_complete(info->rbufs[i])) {
+ /* all buffers full */
+ rx_stop(info);
+ info->rx_restart = 1;
+ continue;
+ }
+ info->rbufs[i].buf[count++] = (unsigned char)reg;
+ /* async mode saves status byte to buffer for each data byte */
+ if (info->params.mode == MGSL_MODE_ASYNC)
+ info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
+ if (count == info->rbuf_fill_level || (reg & BIT10)) {
+ /* buffer full or end of frame */
+ set_desc_count(info->rbufs[i], count);
+ set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
+ info->rbuf_fill_count = count = 0;
+ if (++i == info->rbuf_count)
+ i = 0;
+ info->pending_bh |= BH_RECEIVE;
+ }
+ }
+
+ info->rbuf_fill_index = i;
+ info->rbuf_fill_count = count;
+}
+
+static void isr_serial(struct slgt_info *info)
+{
+ unsigned short status = rd_reg16(info, SSR);
+
+ DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
+
+ wr_reg16(info, SSR, status); /* clear pending */
+
+ info->irq_occurred = true;
+
+ if (info->params.mode == MGSL_MODE_ASYNC) {
+ if (status & IRQ_TXIDLE) {
+ if (info->tx_active)
+ isr_txeom(info, status);
+ }
+ if (info->rx_pio && (status & IRQ_RXDATA))
+ isr_rxdata(info);
+ if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
+ info->icount.brk++;
+ /* process break detection if tty control allows */
+ if (info->port.tty) {
+ if (!(status & info->ignore_status_mask)) {
+ if (info->read_status_mask & MASK_BREAK) {
+ tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
+ if (info->port.flags & ASYNC_SAK)
+ do_SAK(info->port.tty);
+ }
+ }
+ }
+ }
+ } else {
+ if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
+ isr_txeom(info, status);
+ if (info->rx_pio && (status & IRQ_RXDATA))
+ isr_rxdata(info);
+ if (status & IRQ_RXIDLE) {
+ if (status & RXIDLE)
+ info->icount.rxidle++;
+ else
+ info->icount.exithunt++;
+ wake_up_interruptible(&info->event_wait_q);
+ }
+
+ if (status & IRQ_RXOVER)
+ rx_start(info);
+ }
+
+ if (status & IRQ_DSR)
+ dsr_change(info, status);
+ if (status & IRQ_CTS)
+ cts_change(info, status);
+ if (status & IRQ_DCD)
+ dcd_change(info, status);
+ if (status & IRQ_RI)
+ ri_change(info, status);
+}
+
+static void isr_rdma(struct slgt_info *info)
+{
+ unsigned int status = rd_reg32(info, RDCSR);
+
+ DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
+
+ /* RDCSR (rx DMA control/status)
+ *
+ * 31..07 reserved
+ * 06 save status byte to DMA buffer
+ * 05 error
+ * 04 eol (end of list)
+ * 03 eob (end of buffer)
+ * 02 IRQ enable
+ * 01 reset
+ * 00 enable
+ */
+ wr_reg32(info, RDCSR, status); /* clear pending */
+
+ if (status & (BIT5 + BIT4)) {
+ DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
+ info->rx_restart = true;
+ }
+ info->pending_bh |= BH_RECEIVE;
+}
+
+static void isr_tdma(struct slgt_info *info)
+{
+ unsigned int status = rd_reg32(info, TDCSR);
+
+ DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
+
+ /* TDCSR (tx DMA control/status)
+ *
+ * 31..06 reserved
+ * 05 error
+ * 04 eol (end of list)
+ * 03 eob (end of buffer)
+ * 02 IRQ enable
+ * 01 reset
+ * 00 enable
+ */
+ wr_reg32(info, TDCSR, status); /* clear pending */
+
+ if (status & (BIT5 + BIT4 + BIT3)) {
+ // another transmit buffer has completed
+ // run bottom half to get more send data from user
+ info->pending_bh |= BH_TRANSMIT;
+ }
+}
+
+/*
+ * return true if there are unsent tx DMA buffers, otherwise false
+ *
+ * if there are unsent buffers then info->tbuf_start
+ * is set to index of first unsent buffer
+ */
+static bool unsent_tbufs(struct slgt_info *info)
+{
+ unsigned int i = info->tbuf_current;
+ bool rc = false;
+
+ /*
+ * search backwards from last loaded buffer (precedes tbuf_current)
+ * for first unsent buffer (desc_count > 0)
+ */
+
+ do {
+ if (i)
+ i--;
+ else
+ i = info->tbuf_count - 1;
+ if (!desc_count(info->tbufs[i]))
+ break;
+ info->tbuf_start = i;
+ rc = true;
+ } while (i != info->tbuf_current);
+
+ return rc;
+}
+
+static void isr_txeom(struct slgt_info *info, unsigned short status)
+{
+ DBGISR(("%s txeom status=%04x\n", info->device_name, status));
+
+ slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
+ tdma_reset(info);
+ if (status & IRQ_TXUNDER) {
+ unsigned short val = rd_reg16(info, TCR);
+ wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
+ wr_reg16(info, TCR, val); /* clear reset bit */
+ }
+
+ if (info->tx_active) {
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ if (status & IRQ_TXUNDER)
+ info->icount.txunder++;
+ else if (status & IRQ_TXIDLE)
+ info->icount.txok++;
+ }
+
+ if (unsent_tbufs(info)) {
+ tx_start(info);
+ update_tx_timer(info);
+ return;
+ }
+ info->tx_active = false;
+
+ del_timer(&info->tx_timer);
+
+ if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
+ info->signals &= ~SerialSignal_RTS;
+ info->drop_rts_on_tx_done = false;
+ set_signals(info);
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_tx_done(info);
+ else
+#endif
+ {
+ if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
+ tx_stop(info);
+ return;
+ }
+ info->pending_bh |= BH_TRANSMIT;
+ }
+ }
+}
+
+static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
+{
+ struct cond_wait *w, *prev;
+
+ /* wake processes waiting for specific transitions */
+ for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
+ if (w->data & changed) {
+ w->data = state;
+ wake_up_interruptible(&w->q);
+ if (prev != NULL)
+ prev->next = w->next;
+ else
+ info->gpio_wait_q = w->next;
+ } else
+ prev = w;
+ }
+}
+
+/* interrupt service routine
+ *
+ * irq interrupt number
+ * dev_id device ID supplied during interrupt registration
+ */
+static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
+{
+ struct slgt_info *info = dev_id;
+ unsigned int gsr;
+ unsigned int i;
+
+ DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
+
+ while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
+ DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
+ info->irq_occurred = true;
+ for(i=0; i < info->port_count ; i++) {
+ if (info->port_array[i] == NULL)
+ continue;
+ spin_lock(&info->port_array[i]->lock);
+ if (gsr & (BIT8 << i))
+ isr_serial(info->port_array[i]);
+ if (gsr & (BIT16 << (i*2)))
+ isr_rdma(info->port_array[i]);
+ if (gsr & (BIT17 << (i*2)))
+ isr_tdma(info->port_array[i]);
+ spin_unlock(&info->port_array[i]->lock);
+ }
+ }
+
+ if (info->gpio_present) {
+ unsigned int state;
+ unsigned int changed;
+ spin_lock(&info->lock);
+ while ((changed = rd_reg32(info, IOSR)) != 0) {
+ DBGISR(("%s iosr=%08x\n", info->device_name, changed));
+ /* read latched state of GPIO signals */
+ state = rd_reg32(info, IOVR);
+ /* clear pending GPIO interrupt bits */
+ wr_reg32(info, IOSR, changed);
+ for (i=0 ; i < info->port_count ; i++) {
+ if (info->port_array[i] != NULL)
+ isr_gpio(info->port_array[i], changed, state);
+ }
+ }
+ spin_unlock(&info->lock);
+ }
+
+ for(i=0; i < info->port_count ; i++) {
+ struct slgt_info *port = info->port_array[i];
+ if (port == NULL)
+ continue;
+ spin_lock(&port->lock);
+ if ((port->port.count || port->netcount) &&
+ port->pending_bh && !port->bh_running &&
+ !port->bh_requested) {
+ DBGISR(("%s bh queued\n", port->device_name));
+ schedule_work(&port->task);
+ port->bh_requested = true;
+ }
+ spin_unlock(&port->lock);
+ }
+
+ DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
+ return IRQ_HANDLED;
+}
+
+static int startup(struct slgt_info *info)
+{
+ DBGINFO(("%s startup\n", info->device_name));
+
+ if (info->port.flags & ASYNC_INITIALIZED)
+ return 0;
+
+ if (!info->tx_buf) {
+ info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+ if (!info->tx_buf) {
+ DBGERR(("%s can't allocate tx buffer\n", info->device_name));
+ return -ENOMEM;
+ }
+ }
+
+ info->pending_bh = 0;
+
+ memset(&info->icount, 0, sizeof(info->icount));
+
+ /* program hardware for current parameters */
+ change_params(info);
+
+ if (info->port.tty)
+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+ info->port.flags |= ASYNC_INITIALIZED;
+
+ return 0;
+}
+
+/*
+ * called by close() and hangup() to shutdown hardware
+ */
+static void shutdown(struct slgt_info *info)
+{
+ unsigned long flags;
+
+ if (!(info->port.flags & ASYNC_INITIALIZED))
+ return;
+
+ DBGINFO(("%s shutdown\n", info->device_name));
+
+ /* clear status wait queue because status changes */
+ /* can't happen after shutting down the hardware */
+ wake_up_interruptible(&info->status_event_wait_q);
+ wake_up_interruptible(&info->event_wait_q);
+
+ del_timer_sync(&info->tx_timer);
+ del_timer_sync(&info->rx_timer);
+
+ kfree(info->tx_buf);
+ info->tx_buf = NULL;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ tx_stop(info);
+ rx_stop(info);
+
+ slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+
+ if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ set_signals(info);
+ }
+
+ flush_cond_wait(&info->gpio_wait_q);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ if (info->port.tty)
+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+
+ info->port.flags &= ~ASYNC_INITIALIZED;
+}
+
+static void program_hw(struct slgt_info *info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ rx_stop(info);
+ tx_stop(info);
+
+ if (info->params.mode != MGSL_MODE_ASYNC ||
+ info->netcount)
+ sync_mode(info);
+ else
+ async_mode(info);
+
+ set_signals(info);
+
+ info->dcd_chkcount = 0;
+ info->cts_chkcount = 0;
+ info->ri_chkcount = 0;
+ info->dsr_chkcount = 0;
+
+ slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
+ get_signals(info);
+
+ if (info->netcount ||
+ (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
+ rx_start(info);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/*
+ * reconfigure adapter based on new parameters
+ */
+static void change_params(struct slgt_info *info)
+{
+ unsigned cflag;
+ int bits_per_char;
+
+ if (!info->port.tty || !info->port.tty->termios)
+ return;
+ DBGINFO(("%s change_params\n", info->device_name));
+
+ cflag = info->port.tty->termios->c_cflag;
+
+ /* if B0 rate (hangup) specified then negate DTR and RTS */
+ /* otherwise assert DTR and RTS */
+ if (cflag & CBAUD)
+ info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+ /* byte size and parity */
+
+ switch (cflag & CSIZE) {
+ case CS5: info->params.data_bits = 5; break;
+ case CS6: info->params.data_bits = 6; break;
+ case CS7: info->params.data_bits = 7; break;
+ case CS8: info->params.data_bits = 8; break;
+ default: info->params.data_bits = 7; break;
+ }
+
+ info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
+
+ if (cflag & PARENB)
+ info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
+ else
+ info->params.parity = ASYNC_PARITY_NONE;
+
+ /* calculate number of jiffies to transmit a full
+ * FIFO (32 bytes) at specified data rate
+ */
+ bits_per_char = info->params.data_bits +
+ info->params.stop_bits + 1;
+
+ info->params.data_rate = tty_get_baud_rate(info->port.tty);
+
+ if (info->params.data_rate) {
+ info->timeout = (32*HZ*bits_per_char) /
+ info->params.data_rate;
+ }
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+ if (cflag & CRTSCTS)
+ info->port.flags |= ASYNC_CTS_FLOW;
+ else
+ info->port.flags &= ~ASYNC_CTS_FLOW;
+
+ if (cflag & CLOCAL)
+ info->port.flags &= ~ASYNC_CHECK_CD;
+ else
+ info->port.flags |= ASYNC_CHECK_CD;
+
+ /* process tty input control flags */
+
+ info->read_status_mask = IRQ_RXOVER;
+ if (I_INPCK(info->port.tty))
+ info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask |= MASK_BREAK;
+ if (I_IGNPAR(info->port.tty))
+ info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
+ if (I_IGNBRK(info->port.tty)) {
+ info->ignore_status_mask |= MASK_BREAK;
+ /* If ignoring parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->port.tty))
+ info->ignore_status_mask |= MASK_OVERRUN;
+ }
+
+ program_hw(info);
+}
+
+static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
+{
+ DBGINFO(("%s get_stats\n", info->device_name));
+ if (!user_icount) {
+ memset(&info->icount, 0, sizeof(info->icount));
+ } else {
+ if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
+{
+ DBGINFO(("%s get_params\n", info->device_name));
+ if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
+ return -EFAULT;
+ return 0;
+}
+
+static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
+{
+ unsigned long flags;
+ MGSL_PARAMS tmp_params;
+
+ DBGINFO(("%s set_params\n", info->device_name));
+ if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
+ return -EFAULT;
+
+ spin_lock_irqsave(&info->lock, flags);
+ if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
+ info->base_clock = tmp_params.clock_speed;
+ else
+ memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ program_hw(info);
+
+ return 0;
+}
+
+static int get_txidle(struct slgt_info *info, int __user *idle_mode)
+{
+ DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
+ if (put_user(info->idle_mode, idle_mode))
+ return -EFAULT;
+ return 0;
+}
+
+static int set_txidle(struct slgt_info *info, int idle_mode)
+{
+ unsigned long flags;
+ DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
+ spin_lock_irqsave(&info->lock,flags);
+ info->idle_mode = idle_mode;
+ if (info->params.mode != MGSL_MODE_ASYNC)
+ tx_set_idle(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int tx_enable(struct slgt_info *info, int enable)
+{
+ unsigned long flags;
+ DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
+ spin_lock_irqsave(&info->lock,flags);
+ if (enable) {
+ if (!info->tx_enabled)
+ tx_start(info);
+ } else {
+ if (info->tx_enabled)
+ tx_stop(info);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+/*
+ * abort transmit HDLC frame
+ */
+static int tx_abort(struct slgt_info *info)
+{
+ unsigned long flags;
+ DBGINFO(("%s tx_abort\n", info->device_name));
+ spin_lock_irqsave(&info->lock,flags);
+ tdma_reset(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int rx_enable(struct slgt_info *info, int enable)
+{
+ unsigned long flags;
+ unsigned int rbuf_fill_level;
+ DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
+ spin_lock_irqsave(&info->lock,flags);
+ /*
+ * enable[31..16] = receive DMA buffer fill level
+ * 0 = noop (leave fill level unchanged)
+ * fill level must be multiple of 4 and <= buffer size
+ */
+ rbuf_fill_level = ((unsigned int)enable) >> 16;
+ if (rbuf_fill_level) {
+ if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
+ spin_unlock_irqrestore(&info->lock, flags);
+ return -EINVAL;
+ }
+ info->rbuf_fill_level = rbuf_fill_level;
+ if (rbuf_fill_level < 128)
+ info->rx_pio = 1; /* PIO mode */
+ else
+ info->rx_pio = 0; /* DMA mode */
+ rx_stop(info); /* restart receiver to use new fill level */
+ }
+
+ /*
+ * enable[1..0] = receiver enable command
+ * 0 = disable
+ * 1 = enable
+ * 2 = enable or force hunt mode if already enabled
+ */
+ enable &= 3;
+ if (enable) {
+ if (!info->rx_enabled)
+ rx_start(info);
+ else if (enable == 2) {
+ /* force hunt mode (write 1 to RCR[3]) */
+ wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
+ }
+ } else {
+ if (info->rx_enabled)
+ rx_stop(info);
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+/*
+ * wait for specified event to occur
+ */
+static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
+{
+ unsigned long flags;
+ int s;
+ int rc=0;
+ struct mgsl_icount cprev, cnow;
+ int events;
+ int mask;
+ struct _input_signal_events oldsigs, newsigs;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (get_user(mask, mask_ptr))
+ return -EFAULT;
+
+ DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
+
+ spin_lock_irqsave(&info->lock,flags);
+
+ /* return immediately if state matches requested events */
+ get_signals(info);
+ s = info->signals;
+
+ events = mask &
+ ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+ ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+ ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+ if (events) {
+ spin_unlock_irqrestore(&info->lock,flags);
+ goto exit;
+ }
+
+ /* save current irq counts */
+ cprev = info->icount;
+ oldsigs = info->input_signal_events;
+
+ /* enable hunt and idle irqs if needed */
+ if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
+ unsigned short val = rd_reg16(info, SCR);
+ if (!(val & IRQ_RXIDLE))
+ wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&info->event_wait_q, &wait);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get current irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ newsigs = info->input_signal_events;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (newsigs.dsr_up == oldsigs.dsr_up &&
+ newsigs.dsr_down == oldsigs.dsr_down &&
+ newsigs.dcd_up == oldsigs.dcd_up &&
+ newsigs.dcd_down == oldsigs.dcd_down &&
+ newsigs.cts_up == oldsigs.cts_up &&
+ newsigs.cts_down == oldsigs.cts_down &&
+ newsigs.ri_up == oldsigs.ri_up &&
+ newsigs.ri_down == oldsigs.ri_down &&
+ cnow.exithunt == cprev.exithunt &&
+ cnow.rxidle == cprev.rxidle) {
+ rc = -EIO;
+ break;
+ }
+
+ events = mask &
+ ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
+ (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+ (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
+ (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+ (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
+ (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+ (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
+ (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
+ (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
+ (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
+ if (events)
+ break;
+
+ cprev = cnow;
+ oldsigs = newsigs;
+ }
+
+ remove_wait_queue(&info->event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+
+
+ if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+ spin_lock_irqsave(&info->lock,flags);
+ if (!waitqueue_active(&info->event_wait_q)) {
+ /* disable enable exit hunt mode/idle rcvd IRQs */
+ wr_reg16(info, SCR,
+ (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
+ }
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+exit:
+ if (rc == 0)
+ rc = put_user(events, mask_ptr);
+ return rc;
+}
+
+static int get_interface(struct slgt_info *info, int __user *if_mode)
+{
+ DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
+ if (put_user(info->if_mode, if_mode))
+ return -EFAULT;
+ return 0;
+}
+
+static int set_interface(struct slgt_info *info, int if_mode)
+{
+ unsigned long flags;
+ unsigned short val;
+
+ DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
+ spin_lock_irqsave(&info->lock,flags);
+ info->if_mode = if_mode;
+
+ msc_set_vcr(info);
+
+ /* TCR (tx control) 07 1=RTS driver control */
+ val = rd_reg16(info, TCR);
+ if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+ val |= BIT7;
+ else
+ val &= ~BIT7;
+ wr_reg16(info, TCR, val);
+
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int get_xsync(struct slgt_info *info, int __user *xsync)
+{
+ DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync));
+ if (put_user(info->xsync, xsync))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * set extended sync pattern (1 to 4 bytes) for extended sync mode
+ *
+ * sync pattern is contained in least significant bytes of value
+ * most significant byte of sync pattern is oldest (1st sent/detected)
+ */
+static int set_xsync(struct slgt_info *info, int xsync)
+{
+ unsigned long flags;
+
+ DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync));
+ spin_lock_irqsave(&info->lock, flags);
+ info->xsync = xsync;
+ wr_reg32(info, XSR, xsync);
+ spin_unlock_irqrestore(&info->lock, flags);
+ return 0;
+}
+
+static int get_xctrl(struct slgt_info *info, int __user *xctrl)
+{
+ DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl));
+ if (put_user(info->xctrl, xctrl))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * set extended control options
+ *
+ * xctrl[31:19] reserved, must be zero
+ * xctrl[18:17] extended sync pattern length in bytes
+ * 00 = 1 byte in xsr[7:0]
+ * 01 = 2 bytes in xsr[15:0]
+ * 10 = 3 bytes in xsr[23:0]
+ * 11 = 4 bytes in xsr[31:0]
+ * xctrl[16] 1 = enable terminal count, 0=disabled
+ * xctrl[15:0] receive terminal count for fixed length packets
+ * value is count minus one (0 = 1 byte packet)
+ * when terminal count is reached, receiver
+ * automatically returns to hunt mode and receive
+ * FIFO contents are flushed to DMA buffers with
+ * end of frame (EOF) status
+ */
+static int set_xctrl(struct slgt_info *info, int xctrl)
+{
+ unsigned long flags;
+
+ DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl));
+ spin_lock_irqsave(&info->lock, flags);
+ info->xctrl = xctrl;
+ wr_reg32(info, XCR, xctrl);
+ spin_unlock_irqrestore(&info->lock, flags);
+ return 0;
+}
+
+/*
+ * set general purpose IO pin state and direction
+ *
+ * user_gpio fields:
+ * state each bit indicates a pin state
+ * smask set bit indicates pin state to set
+ * dir each bit indicates a pin direction (0=input, 1=output)
+ * dmask set bit indicates pin direction to set
+ */
+static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ unsigned long flags;
+ struct gpio_desc gpio;
+ __u32 data;
+
+ if (!info->gpio_present)
+ return -EINVAL;
+ if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
+ info->device_name, gpio.state, gpio.smask,
+ gpio.dir, gpio.dmask));
+
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
+ if (gpio.dmask) {
+ data = rd_reg32(info, IODR);
+ data |= gpio.dmask & gpio.dir;
+ data &= ~(gpio.dmask & ~gpio.dir);
+ wr_reg32(info, IODR, data);
+ }
+ if (gpio.smask) {
+ data = rd_reg32(info, IOVR);
+ data |= gpio.smask & gpio.state;
+ data &= ~(gpio.smask & ~gpio.state);
+ wr_reg32(info, IOVR, data);
+ }
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+
+ return 0;
+}
+
+/*
+ * get general purpose IO pin state and direction
+ */
+static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ struct gpio_desc gpio;
+ if (!info->gpio_present)
+ return -EINVAL;
+ gpio.state = rd_reg32(info, IOVR);
+ gpio.smask = 0xffffffff;
+ gpio.dir = rd_reg32(info, IODR);
+ gpio.dmask = 0xffffffff;
+ if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
+ info->device_name, gpio.state, gpio.dir));
+ return 0;
+}
+
+/*
+ * conditional wait facility
+ */
+static void init_cond_wait(struct cond_wait *w, unsigned int data)
+{
+ init_waitqueue_head(&w->q);
+ init_waitqueue_entry(&w->wait, current);
+ w->data = data;
+}
+
+static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
+{
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&w->q, &w->wait);
+ w->next = *head;
+ *head = w;
+}
+
+static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
+{
+ struct cond_wait *w, *prev;
+ remove_wait_queue(&cw->q, &cw->wait);
+ set_current_state(TASK_RUNNING);
+ for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
+ if (w == cw) {
+ if (prev != NULL)
+ prev->next = w->next;
+ else
+ *head = w->next;
+ break;
+ }
+ }
+}
+
+static void flush_cond_wait(struct cond_wait **head)
+{
+ while (*head != NULL) {
+ wake_up_interruptible(&(*head)->q);
+ *head = (*head)->next;
+ }
+}
+
+/*
+ * wait for general purpose I/O pin(s) to enter specified state
+ *
+ * user_gpio fields:
+ * state - bit indicates target pin state
+ * smask - set bit indicates watched pin
+ *
+ * The wait ends when at least one watched pin enters the specified
+ * state. When 0 (no error) is returned, user_gpio->state is set to the
+ * state of all GPIO pins when the wait ends.
+ *
+ * Note: Each pin may be a dedicated input, dedicated output, or
+ * configurable input/output. The number and configuration of pins
+ * varies with the specific adapter model. Only input pins (dedicated
+ * or configured) can be monitored with this function.
+ */
+static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
+{
+ unsigned long flags;
+ int rc = 0;
+ struct gpio_desc gpio;
+ struct cond_wait wait;
+ u32 state;
+
+ if (!info->gpio_present)
+ return -EINVAL;
+ if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
+ return -EFAULT;
+ DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
+ info->device_name, gpio.state, gpio.smask));
+ /* ignore output pins identified by set IODR bit */
+ if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
+ return -EINVAL;
+ init_cond_wait(&wait, gpio.smask);
+
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
+ /* enable interrupts for watched pins */
+ wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
+ /* get current pin states */
+ state = rd_reg32(info, IOVR);
+
+ if (gpio.smask & ~(state ^ gpio.state)) {
+ /* already in target state */
+ gpio.state = state;
+ } else {
+ /* wait for target state */
+ add_cond_wait(&info->gpio_wait_q, &wait);
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+ schedule();
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
+ else
+ gpio.state = wait.data;
+ spin_lock_irqsave(&info->port_array[0]->lock, flags);
+ remove_cond_wait(&info->gpio_wait_q, &wait);
+ }
+
+ /* disable all GPIO interrupts if no waiting processes */
+ if (info->gpio_wait_q == NULL)
+ wr_reg32(info, IOER, 0);
+ spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
+
+ if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
+ rc = -EFAULT;
+ return rc;
+}
+
+static int modem_input_wait(struct slgt_info *info,int arg)
+{
+ unsigned long flags;
+ int rc;
+ struct mgsl_icount cprev, cnow;
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* save current irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cprev = info->icount;
+ add_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ for(;;) {
+ schedule();
+ if (signal_pending(current)) {
+ rc = -ERESTARTSYS;
+ break;
+ }
+
+ /* get new irq counts */
+ spin_lock_irqsave(&info->lock,flags);
+ cnow = info->icount;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ /* if no change, wait aborted for some reason */
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+ rc = -EIO;
+ break;
+ }
+
+ /* check for change in caller specified modem input */
+ if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+ (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+ (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
+ (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+ rc = 0;
+ break;
+ }
+
+ cprev = cnow;
+ }
+ remove_wait_queue(&info->status_event_wait_q, &wait);
+ set_current_state(TASK_RUNNING);
+ return rc;
+}
+
+/*
+ * return state of serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned int result;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+ ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+ ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+ ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
+ ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+ ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+ DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
+ return result;
+}
+
+/*
+ * set modem control signals (DTR/RTS)
+ *
+ * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
+ * TIOCMSET = set/clear signal values
+ * value bit mask for command
+ */
+static int tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct slgt_info *info = tty->driver_data;
+ unsigned long flags;
+
+ DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
+
+ if (set & TIOCM_RTS)
+ info->signals |= SerialSignal_RTS;
+ if (set & TIOCM_DTR)
+ info->signals |= SerialSignal_DTR;
+ if (clear & TIOCM_RTS)
+ info->signals &= ~SerialSignal_RTS;
+ if (clear & TIOCM_DTR)
+ info->signals &= ~SerialSignal_DTR;
+
+ spin_lock_irqsave(&info->lock,flags);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return 0;
+}
+
+static int carrier_raised(struct tty_port *port)
+{
+ unsigned long flags;
+ struct slgt_info *info = container_of(port, struct slgt_info, port);
+
+ spin_lock_irqsave(&info->lock,flags);
+ get_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ return (info->signals & SerialSignal_DCD) ? 1 : 0;
+}
+
+static void dtr_rts(struct tty_port *port, int on)
+{
+ unsigned long flags;
+ struct slgt_info *info = container_of(port, struct slgt_info, port);
+
+ spin_lock_irqsave(&info->lock,flags);
+ if (on)
+ info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ else
+ info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ set_signals(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+}
+
+
+/*
+ * block current process until the device is ready to open
+ */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct slgt_info *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ bool do_clocal = false;
+ bool extra_count = false;
+ unsigned long flags;
+ int cd;
+ struct tty_port *port = &info->port;
+
+ DBGINFO(("%s block_til_ready\n", tty->driver->name));
+
+ if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+ /* nonblock mode is set or port is not enabled */
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = true;
+
+ /* Wait for carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, port->count is dropped by one, so that
+ * close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ spin_lock_irqsave(&info->lock, flags);
+ if (!tty_hung_up_p(filp)) {
+ extra_count = true;
+ port->count--;
+ }
+ spin_unlock_irqrestore(&info->lock, flags);
+ port->blocked_open++;
+
+ while (1) {
+ if ((tty->termios->c_cflag & CBAUD))
+ tty_port_raise_dtr_rts(port);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+ break;
+ }
+
+ cd = tty_port_carrier_raised(port);
+
+ if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
+ break;
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+
+ DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
+ tty_unlock();
+ schedule();
+ tty_lock();
+ }
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+
+ if (extra_count)
+ port->count++;
+ port->blocked_open--;
+
+ if (!retval)
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+
+ DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
+ return retval;
+}
+
+static int alloc_tmp_rbuf(struct slgt_info *info)
+{
+ info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
+ if (info->tmp_rbuf == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+static void free_tmp_rbuf(struct slgt_info *info)
+{
+ kfree(info->tmp_rbuf);
+ info->tmp_rbuf = NULL;
+}
+
+/*
+ * allocate DMA descriptor lists.
+ */
+static int alloc_desc(struct slgt_info *info)
+{
+ unsigned int i;
+ unsigned int pbufs;
+
+ /* allocate memory to hold descriptor lists */
+ info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
+ if (info->bufs == NULL)
+ return -ENOMEM;
+
+ memset(info->bufs, 0, DESC_LIST_SIZE);
+
+ info->rbufs = (struct slgt_desc*)info->bufs;
+ info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
+
+ pbufs = (unsigned int)info->bufs_dma_addr;
+
+ /*
+ * Build circular lists of descriptors
+ */
+
+ for (i=0; i < info->rbuf_count; i++) {
+ /* physical address of this descriptor */
+ info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
+
+ /* physical address of next descriptor */
+ if (i == info->rbuf_count - 1)
+ info->rbufs[i].next = cpu_to_le32(pbufs);
+ else
+ info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
+ set_desc_count(info->rbufs[i], DMABUFSIZE);
+ }
+
+ for (i=0; i < info->tbuf_count; i++) {
+ /* physical address of this descriptor */
+ info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
+
+ /* physical address of next descriptor */
+ if (i == info->tbuf_count - 1)
+ info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
+ else
+ info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
+ }
+
+ return 0;
+}
+
+static void free_desc(struct slgt_info *info)
+{
+ if (info->bufs != NULL) {
+ pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
+ info->bufs = NULL;
+ info->rbufs = NULL;
+ info->tbufs = NULL;
+ }
+}
+
+static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
+{
+ int i;
+ for (i=0; i < count; i++) {
+ if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
+ return -ENOMEM;
+ bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
+ }
+ return 0;
+}
+
+static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
+{
+ int i;
+ for (i=0; i < count; i++) {
+ if (bufs[i].buf == NULL)
+ continue;
+ pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
+ bufs[i].buf = NULL;
+ }
+}
+
+static int alloc_dma_bufs(struct slgt_info *info)
+{
+ info->rbuf_count = 32;
+ info->tbuf_count = 32;
+
+ if (alloc_desc(info) < 0 ||
+ alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
+ alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
+ alloc_tmp_rbuf(info) < 0) {
+ DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
+ return -ENOMEM;
+ }
+ reset_rbufs(info);
+ return 0;
+}
+
+static void free_dma_bufs(struct slgt_info *info)
+{
+ if (info->bufs) {
+ free_bufs(info, info->rbufs, info->rbuf_count);
+ free_bufs(info, info->tbufs, info->tbuf_count);
+ free_desc(info);
+ }
+ free_tmp_rbuf(info);
+}
+
+static int claim_resources(struct slgt_info *info)
+{
+ if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
+ DBGERR(("%s reg addr conflict, addr=%08X\n",
+ info->device_name, info->phys_reg_addr));
+ info->init_error = DiagStatus_AddressConflict;
+ goto errout;
+ }
+ else
+ info->reg_addr_requested = true;
+
+ info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
+ if (!info->reg_addr) {
+ DBGERR(("%s cant map device registers, addr=%08X\n",
+ info->device_name, info->phys_reg_addr));
+ info->init_error = DiagStatus_CantAssignPciResources;
+ goto errout;
+ }
+ return 0;
+
+errout:
+ release_resources(info);
+ return -ENODEV;
+}
+
+static void release_resources(struct slgt_info *info)
+{
+ if (info->irq_requested) {
+ free_irq(info->irq_level, info);
+ info->irq_requested = false;
+ }
+
+ if (info->reg_addr_requested) {
+ release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
+ info->reg_addr_requested = false;
+ }
+
+ if (info->reg_addr) {
+ iounmap(info->reg_addr);
+ info->reg_addr = NULL;
+ }
+}
+
+/* Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ */
+static void add_device(struct slgt_info *info)
+{
+ char *devstr;
+
+ info->next_device = NULL;
+ info->line = slgt_device_count;
+ sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
+
+ if (info->line < MAX_DEVICES) {
+ if (maxframe[info->line])
+ info->max_frame_size = maxframe[info->line];
+ }
+
+ slgt_device_count++;
+
+ if (!slgt_device_list)
+ slgt_device_list = info;
+ else {
+ struct slgt_info *current_dev = slgt_device_list;
+ while(current_dev->next_device)
+ current_dev = current_dev->next_device;
+ current_dev->next_device = info;
+ }
+
+ if (info->max_frame_size < 4096)
+ info->max_frame_size = 4096;
+ else if (info->max_frame_size > 65535)
+ info->max_frame_size = 65535;
+
+ switch(info->pdev->device) {
+ case SYNCLINK_GT_DEVICE_ID:
+ devstr = "GT";
+ break;
+ case SYNCLINK_GT2_DEVICE_ID:
+ devstr = "GT2";
+ break;
+ case SYNCLINK_GT4_DEVICE_ID:
+ devstr = "GT4";
+ break;
+ case SYNCLINK_AC_DEVICE_ID:
+ devstr = "AC";
+ info->params.mode = MGSL_MODE_ASYNC;
+ break;
+ default:
+ devstr = "(unknown model)";
+ }
+ printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
+ devstr, info->device_name, info->phys_reg_addr,
+ info->irq_level, info->max_frame_size);
+
+#if SYNCLINK_GENERIC_HDLC
+ hdlcdev_init(info);
+#endif
+}
+
+static const struct tty_port_operations slgt_port_ops = {
+ .carrier_raised = carrier_raised,
+ .dtr_rts = dtr_rts,
+};
+
+/*
+ * allocate device instance structure, return NULL on failure
+ */
+static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+{
+ struct slgt_info *info;
+
+ info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
+
+ if (!info) {
+ DBGERR(("%s device alloc failed adapter=%d port=%d\n",
+ driver_name, adapter_num, port_num));
+ } else {
+ tty_port_init(&info->port);
+ info->port.ops = &slgt_port_ops;
+ info->magic = MGSL_MAGIC;
+ INIT_WORK(&info->task, bh_handler);
+ info->max_frame_size = 4096;
+ info->base_clock = 14745600;
+ info->rbuf_fill_level = DMABUFSIZE;
+ info->port.close_delay = 5*HZ/10;
+ info->port.closing_wait = 30*HZ;
+ init_waitqueue_head(&info->status_event_wait_q);
+ init_waitqueue_head(&info->event_wait_q);
+ spin_lock_init(&info->netlock);
+ memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+ info->idle_mode = HDLC_TXIDLE_FLAGS;
+ info->adapter_num = adapter_num;
+ info->port_num = port_num;
+
+ setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+ setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
+
+ /* Copy configuration info to device instance data */
+ info->pdev = pdev;
+ info->irq_level = pdev->irq;
+ info->phys_reg_addr = pci_resource_start(pdev,0);
+
+ info->bus_type = MGSL_BUS_TYPE_PCI;
+ info->irq_flags = IRQF_SHARED;
+
+ info->init_error = -1; /* assume error, set to 0 on successful init */
+ }
+
+ return info;
+}
+
+static void device_init(int adapter_num, struct pci_dev *pdev)
+{
+ struct slgt_info *port_array[SLGT_MAX_PORTS];
+ int i;
+ int port_count = 1;
+
+ if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
+ port_count = 2;
+ else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
+ port_count = 4;
+
+ /* allocate device instances for all ports */
+ for (i=0; i < port_count; ++i) {
+ port_array[i] = alloc_dev(adapter_num, i, pdev);
+ if (port_array[i] == NULL) {
+ for (--i; i >= 0; --i)
+ kfree(port_array[i]);
+ return;
+ }
+ }
+
+ /* give copy of port_array to all ports and add to device list */
+ for (i=0; i < port_count; ++i) {
+ memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
+ add_device(port_array[i]);
+ port_array[i]->port_count = port_count;
+ spin_lock_init(&port_array[i]->lock);
+ }
+
+ /* Allocate and claim adapter resources */
+ if (!claim_resources(port_array[0])) {
+
+ alloc_dma_bufs(port_array[0]);
+
+ /* copy resource information from first port to others */
+ for (i = 1; i < port_count; ++i) {
+ port_array[i]->irq_level = port_array[0]->irq_level;
+ port_array[i]->reg_addr = port_array[0]->reg_addr;
+ alloc_dma_bufs(port_array[i]);
+ }
+
+ if (request_irq(port_array[0]->irq_level,
+ slgt_interrupt,
+ port_array[0]->irq_flags,
+ port_array[0]->device_name,
+ port_array[0]) < 0) {
+ DBGERR(("%s request_irq failed IRQ=%d\n",
+ port_array[0]->device_name,
+ port_array[0]->irq_level));
+ } else {
+ port_array[0]->irq_requested = true;
+ adapter_test(port_array[0]);
+ for (i=1 ; i < port_count ; i++) {
+ port_array[i]->init_error = port_array[0]->init_error;
+ port_array[i]->gpio_present = port_array[0]->gpio_present;
+ }
+ }
+ }
+
+ for (i=0; i < port_count; ++i)
+ tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
+}
+
+static int __devinit init_one(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ if (pci_enable_device(dev)) {
+ printk("error enabling pci device %p\n", dev);
+ return -EIO;
+ }
+ pci_set_master(dev);
+ device_init(slgt_device_count, dev);
+ return 0;
+}
+
+static void __devexit remove_one(struct pci_dev *dev)
+{
+}
+
+static const struct tty_operations ops = {
+ .open = open,
+ .close = close,
+ .write = write,
+ .put_char = put_char,
+ .flush_chars = flush_chars,
+ .write_room = write_room,
+ .chars_in_buffer = chars_in_buffer,
+ .flush_buffer = flush_buffer,
+ .ioctl = ioctl,
+ .compat_ioctl = slgt_compat_ioctl,
+ .throttle = throttle,
+ .unthrottle = unthrottle,
+ .send_xchar = send_xchar,
+ .break_ctl = set_break,
+ .wait_until_sent = wait_until_sent,
+ .set_termios = set_termios,
+ .stop = tx_hold,
+ .start = tx_release,
+ .hangup = hangup,
+ .tiocmget = tiocmget,
+ .tiocmset = tiocmset,
+ .get_icount = get_icount,
+ .proc_fops = &synclink_gt_proc_fops,
+};
+
+static void slgt_cleanup(void)
+{
+ int rc;
+ struct slgt_info *info;
+ struct slgt_info *tmp;
+
+ printk(KERN_INFO "unload %s\n", driver_name);
+
+ if (serial_driver) {
+ for (info=slgt_device_list ; info != NULL ; info=info->next_device)
+ tty_unregister_device(serial_driver, info->line);
+ if ((rc = tty_unregister_driver(serial_driver)))
+ DBGERR(("tty_unregister_driver error=%d\n", rc));
+ put_tty_driver(serial_driver);
+ }
+
+ /* reset devices */
+ info = slgt_device_list;
+ while(info) {
+ reset_port(info);
+ info = info->next_device;
+ }
+
+ /* release devices */
+ info = slgt_device_list;
+ while(info) {
+#if SYNCLINK_GENERIC_HDLC
+ hdlcdev_exit(info);
+#endif
+ free_dma_bufs(info);
+ free_tmp_rbuf(info);
+ if (info->port_num == 0)
+ release_resources(info);
+ tmp = info;
+ info = info->next_device;
+ kfree(tmp);
+ }
+
+ if (pci_registered)
+ pci_unregister_driver(&pci_driver);
+}
+
+/*
+ * Driver initialization entry point.
+ */
+static int __init slgt_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO "%s\n", driver_name);
+
+ serial_driver = alloc_tty_driver(MAX_DEVICES);
+ if (!serial_driver) {
+ printk("%s can't allocate tty driver\n", driver_name);
+ return -ENOMEM;
+ }
+
+ /* Initialize the tty_driver structure */
+
+ serial_driver->owner = THIS_MODULE;
+ serial_driver->driver_name = tty_driver_name;
+ serial_driver->name = tty_dev_prefix;
+ serial_driver->major = ttymajor;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(serial_driver, &ops);
+ if ((rc = tty_register_driver(serial_driver)) < 0) {
+ DBGERR(("%s can't register serial driver\n", driver_name));
+ put_tty_driver(serial_driver);
+ serial_driver = NULL;
+ goto error;
+ }
+
+ printk(KERN_INFO "%s, tty major#%d\n",
+ driver_name, serial_driver->major);
+
+ slgt_device_count = 0;
+ if ((rc = pci_register_driver(&pci_driver)) < 0) {
+ printk("%s pci_register_driver error=%d\n", driver_name, rc);
+ goto error;
+ }
+ pci_registered = true;
+
+ if (!slgt_device_list)
+ printk("%s no devices found\n",driver_name);
+
+ return 0;
+
+error:
+ slgt_cleanup();
+ return rc;
+}
+
+static void __exit slgt_exit(void)
+{
+ slgt_cleanup();
+}
+
+module_init(slgt_init);
+module_exit(slgt_exit);
+
+/*
+ * register access routines
+ */
+
+#define CALC_REGADDR() \
+ unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
+ if (addr >= 0x80) \
+ reg_addr += (info->port_num) * 32; \
+ else if (addr >= 0x40) \
+ reg_addr += (info->port_num) * 16;
+
+static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
+{
+ CALC_REGADDR();
+ return readb((void __iomem *)reg_addr);
+}
+
+static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
+{
+ CALC_REGADDR();
+ writeb(value, (void __iomem *)reg_addr);
+}
+
+static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
+{
+ CALC_REGADDR();
+ return readw((void __iomem *)reg_addr);
+}
+
+static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
+{
+ CALC_REGADDR();
+ writew(value, (void __iomem *)reg_addr);
+}
+
+static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
+{
+ CALC_REGADDR();
+ return readl((void __iomem *)reg_addr);
+}
+
+static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
+{
+ CALC_REGADDR();
+ writel(value, (void __iomem *)reg_addr);
+}
+
+static void rdma_reset(struct slgt_info *info)
+{
+ unsigned int i;
+
+ /* set reset bit */
+ wr_reg32(info, RDCSR, BIT1);
+
+ /* wait for enable bit cleared */
+ for(i=0 ; i < 1000 ; i++)
+ if (!(rd_reg32(info, RDCSR) & BIT0))
+ break;
+}
+
+static void tdma_reset(struct slgt_info *info)
+{
+ unsigned int i;
+
+ /* set reset bit */
+ wr_reg32(info, TDCSR, BIT1);
+
+ /* wait for enable bit cleared */
+ for(i=0 ; i < 1000 ; i++)
+ if (!(rd_reg32(info, TDCSR) & BIT0))
+ break;
+}
+
+/*
+ * enable internal loopback
+ * TxCLK and RxCLK are generated from BRG
+ * and TxD is looped back to RxD internally.
+ */
+static void enable_loopback(struct slgt_info *info)
+{
+ /* SCR (serial control) BIT2=looopback enable */
+ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ /* CCR (clock control)
+ * 07..05 tx clock source (010 = BRG)
+ * 04..02 rx clock source (010 = BRG)
+ * 01 auxclk enable (0 = disable)
+ * 00 BRG enable (1 = enable)
+ *
+ * 0100 1001
+ */
+ wr_reg8(info, CCR, 0x49);
+
+ /* set speed if available, otherwise use default */
+ if (info->params.clock_speed)
+ set_rate(info, info->params.clock_speed);
+ else
+ set_rate(info, 3686400);
+ }
+}
+
+/*
+ * set baud rate generator to specified rate
+ */
+static void set_rate(struct slgt_info *info, u32 rate)
+{
+ unsigned int div;
+ unsigned int osc = info->base_clock;
+
+ /* div = osc/rate - 1
+ *
+ * Round div up if osc/rate is not integer to
+ * force to next slowest rate.
+ */
+
+ if (rate) {
+ div = osc/rate;
+ if (!(osc % rate) && div)
+ div--;
+ wr_reg16(info, BDR, (unsigned short)div);
+ }
+}
+
+static void rx_stop(struct slgt_info *info)
+{
+ unsigned short val;
+
+ /* disable and reset receiver */
+ val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
+ wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
+ wr_reg16(info, RCR, val); /* clear reset bit */
+
+ slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
+
+ /* clear pending rx interrupts */
+ wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
+
+ rdma_reset(info);
+
+ info->rx_enabled = false;
+ info->rx_restart = false;
+}
+
+static void rx_start(struct slgt_info *info)
+{
+ unsigned short val;
+
+ slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
+
+ /* clear pending rx overrun IRQ */
+ wr_reg16(info, SSR, IRQ_RXOVER);
+
+ /* reset and disable receiver */
+ val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
+ wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
+ wr_reg16(info, RCR, val); /* clear reset bit */
+
+ rdma_reset(info);
+ reset_rbufs(info);
+
+ if (info->rx_pio) {
+ /* rx request when rx FIFO not empty */
+ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
+ slgt_irq_on(info, IRQ_RXDATA);
+ if (info->params.mode == MGSL_MODE_ASYNC) {
+ /* enable saving of rx status */
+ wr_reg32(info, RDCSR, BIT6);
+ }
+ } else {
+ /* rx request when rx FIFO half full */
+ wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
+ /* set 1st descriptor address */
+ wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ /* enable rx DMA and DMA interrupt */
+ wr_reg32(info, RDCSR, (BIT2 + BIT0));
+ } else {
+ /* enable saving of rx status, rx DMA and DMA interrupt */
+ wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+ }
+ }
+
+ slgt_irq_on(info, IRQ_RXOVER);
+
+ /* enable receiver */
+ wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
+
+ info->rx_restart = false;
+ info->rx_enabled = true;
+}
+
+static void tx_start(struct slgt_info *info)
+{
+ if (!info->tx_enabled) {
+ wr_reg16(info, TCR,
+ (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
+ info->tx_enabled = true;
+ }
+
+ if (desc_count(info->tbufs[info->tbuf_start])) {
+ info->drop_rts_on_tx_done = false;
+
+ if (info->params.mode != MGSL_MODE_ASYNC) {
+ if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
+ get_signals(info);
+ if (!(info->signals & SerialSignal_RTS)) {
+ info->signals |= SerialSignal_RTS;
+ set_signals(info);
+ info->drop_rts_on_tx_done = true;
+ }
+ }
+
+ slgt_irq_off(info, IRQ_TXDATA);
+ slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
+ /* clear tx idle and underrun status bits */
+ wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
+ } else {
+ slgt_irq_off(info, IRQ_TXDATA);
+ slgt_irq_on(info, IRQ_TXIDLE);
+ /* clear tx idle status bit */
+ wr_reg16(info, SSR, IRQ_TXIDLE);
+ }
+ /* set 1st descriptor address and start DMA */
+ wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
+ wr_reg32(info, TDCSR, BIT2 + BIT0);
+ info->tx_active = true;
+ }
+}
+
+static void tx_stop(struct slgt_info *info)
+{
+ unsigned short val;
+
+ del_timer(&info->tx_timer);
+
+ tdma_reset(info);
+
+ /* reset and disable transmitter */
+ val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
+ wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
+
+ slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
+
+ /* clear tx idle and underrun status bit */
+ wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
+
+ reset_tbufs(info);
+
+ info->tx_enabled = false;
+ info->tx_active = false;
+}
+
+static void reset_port(struct slgt_info *info)
+{
+ if (!info->reg_addr)
+ return;
+
+ tx_stop(info);
+ rx_stop(info);
+
+ info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ set_signals(info);
+
+ slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+}
+
+static void reset_adapter(struct slgt_info *info)
+{
+ int i;
+ for (i=0; i < info->port_count; ++i) {
+ if (info->port_array[i])
+ reset_port(info->port_array[i]);
+ }
+}
+
+static void async_mode(struct slgt_info *info)
+{
+ unsigned short val;
+
+ slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+ tx_stop(info);
+ rx_stop(info);
+
+ /* TCR (tx control)
+ *
+ * 15..13 mode, 010=async
+ * 12..10 encoding, 000=NRZ
+ * 09 parity enable
+ * 08 1=odd parity, 0=even parity
+ * 07 1=RTS driver control
+ * 06 1=break enable
+ * 05..04 character length
+ * 00=5 bits
+ * 01=6 bits
+ * 10=7 bits
+ * 11=8 bits
+ * 03 0=1 stop bit, 1=2 stop bits
+ * 02 reset
+ * 01 enable
+ * 00 auto-CTS enable
+ */
+ val = 0x4000;
+
+ if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+ val |= BIT7;
+
+ if (info->params.parity != ASYNC_PARITY_NONE) {
+ val |= BIT9;
+ if (info->params.parity == ASYNC_PARITY_ODD)
+ val |= BIT8;
+ }
+
+ switch (info->params.data_bits)
+ {
+ case 6: val |= BIT4; break;
+ case 7: val |= BIT5; break;
+ case 8: val |= BIT5 + BIT4; break;
+ }
+
+ if (info->params.stop_bits != 1)
+ val |= BIT3;
+
+ if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+ val |= BIT0;
+
+ wr_reg16(info, TCR, val);
+
+ /* RCR (rx control)
+ *
+ * 15..13 mode, 010=async
+ * 12..10 encoding, 000=NRZ
+ * 09 parity enable
+ * 08 1=odd parity, 0=even parity
+ * 07..06 reserved, must be 0
+ * 05..04 character length
+ * 00=5 bits
+ * 01=6 bits
+ * 10=7 bits
+ * 11=8 bits
+ * 03 reserved, must be zero
+ * 02 reset
+ * 01 enable
+ * 00 auto-DCD enable
+ */
+ val = 0x4000;
+
+ if (info->params.parity != ASYNC_PARITY_NONE) {
+ val |= BIT9;
+ if (info->params.parity == ASYNC_PARITY_ODD)
+ val |= BIT8;
+ }
+
+ switch (info->params.data_bits)
+ {
+ case 6: val |= BIT4; break;
+ case 7: val |= BIT5; break;
+ case 8: val |= BIT5 + BIT4; break;
+ }
+
+ if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+ val |= BIT0;
+
+ wr_reg16(info, RCR, val);
+
+ /* CCR (clock control)
+ *
+ * 07..05 011 = tx clock source is BRG/16
+ * 04..02 010 = rx clock source is BRG
+ * 01 0 = auxclk disabled
+ * 00 1 = BRG enabled
+ *
+ * 0110 1001
+ */
+ wr_reg8(info, CCR, 0x69);
+
+ msc_set_vcr(info);
+
+ /* SCR (serial control)
+ *
+ * 15 1=tx req on FIFO half empty
+ * 14 1=rx req on FIFO half full
+ * 13 tx data IRQ enable
+ * 12 tx idle IRQ enable
+ * 11 rx break on IRQ enable
+ * 10 rx data IRQ enable
+ * 09 rx break off IRQ enable
+ * 08 overrun IRQ enable
+ * 07 DSR IRQ enable
+ * 06 CTS IRQ enable
+ * 05 DCD IRQ enable
+ * 04 RI IRQ enable
+ * 03 0=16x sampling, 1=8x sampling
+ * 02 1=txd->rxd internal loopback enable
+ * 01 reserved, must be zero
+ * 00 1=master IRQ enable
+ */
+ val = BIT15 + BIT14 + BIT0;
+ /* JCR[8] : 1 = x8 async mode feature available */
+ if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
+ ((info->base_clock < (info->params.data_rate * 16)) ||
+ (info->base_clock % (info->params.data_rate * 16)))) {
+ /* use 8x sampling */
+ val |= BIT3;
+ set_rate(info, info->params.data_rate * 8);
+ } else {
+ /* use 16x sampling */
+ set_rate(info, info->params.data_rate * 16);
+ }
+ wr_reg16(info, SCR, val);
+
+ slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
+
+ if (info->params.loopback)
+ enable_loopback(info);
+}
+
+static void sync_mode(struct slgt_info *info)
+{
+ unsigned short val;
+
+ slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
+ tx_stop(info);
+ rx_stop(info);
+
+ /* TCR (tx control)
+ *
+ * 15..13 mode
+ * 000=HDLC/SDLC
+ * 001=raw bit synchronous
+ * 010=asynchronous/isochronous
+ * 011=monosync byte synchronous
+ * 100=bisync byte synchronous
+ * 101=xsync byte synchronous
+ * 12..10 encoding
+ * 09 CRC enable
+ * 08 CRC32
+ * 07 1=RTS driver control
+ * 06 preamble enable
+ * 05..04 preamble length
+ * 03 share open/close flag
+ * 02 reset
+ * 01 enable
+ * 00 auto-CTS enable
+ */
+ val = BIT2;
+
+ switch(info->params.mode) {
+ case MGSL_MODE_XSYNC:
+ val |= BIT15 + BIT13;
+ break;
+ case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+ case MGSL_MODE_BISYNC: val |= BIT15; break;
+ case MGSL_MODE_RAW: val |= BIT13; break;
+ }
+ if (info->if_mode & MGSL_INTERFACE_RTS_EN)
+ val |= BIT7;
+
+ switch(info->params.encoding)
+ {
+ case HDLC_ENCODING_NRZB: val |= BIT10; break;
+ case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
+ case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
+ case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
+ case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
+ }
+
+ switch (info->params.crc_type & HDLC_CRC_MASK)
+ {
+ case HDLC_CRC_16_CCITT: val |= BIT9; break;
+ case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
+ }
+
+ if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
+ val |= BIT6;
+
+ switch (info->params.preamble_length)
+ {
+ case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
+ case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
+ case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
+ }
+
+ if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+ val |= BIT0;
+
+ wr_reg16(info, TCR, val);
+
+ /* TPR (transmit preamble) */
+
+ switch (info->params.preamble)
+ {
+ case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
+ case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
+ case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
+ case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
+ case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
+ default: val = 0x7e; break;
+ }
+ wr_reg8(info, TPR, (unsigned char)val);
+
+ /* RCR (rx control)
+ *
+ * 15..13 mode
+ * 000=HDLC/SDLC
+ * 001=raw bit synchronous
+ * 010=asynchronous/isochronous
+ * 011=monosync byte synchronous
+ * 100=bisync byte synchronous
+ * 101=xsync byte synchronous
+ * 12..10 encoding
+ * 09 CRC enable
+ * 08 CRC32
+ * 07..03 reserved, must be 0
+ * 02 reset
+ * 01 enable
+ * 00 auto-DCD enable
+ */
+ val = 0;
+
+ switch(info->params.mode) {
+ case MGSL_MODE_XSYNC:
+ val |= BIT15 + BIT13;
+ break;
+ case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
+ case MGSL_MODE_BISYNC: val |= BIT15; break;
+ case MGSL_MODE_RAW: val |= BIT13; break;
+ }
+
+ switch(info->params.encoding)
+ {
+ case HDLC_ENCODING_NRZB: val |= BIT10; break;
+ case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
+ case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
+ case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
+ case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
+ }
+
+ switch (info->params.crc_type & HDLC_CRC_MASK)
+ {
+ case HDLC_CRC_16_CCITT: val |= BIT9; break;
+ case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
+ }
+
+ if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+ val |= BIT0;
+
+ wr_reg16(info, RCR, val);
+
+ /* CCR (clock control)
+ *
+ * 07..05 tx clock source
+ * 04..02 rx clock source
+ * 01 auxclk enable
+ * 00 BRG enable
+ */
+ val = 0;
+
+ if (info->params.flags & HDLC_FLAG_TXC_BRG)
+ {
+ // when RxC source is DPLL, BRG generates 16X DPLL
+ // reference clock, so take TxC from BRG/16 to get
+ // transmit clock at actual data rate
+ if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+ val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
+ else
+ val |= BIT6; /* 010, txclk = BRG */
+ }
+ else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
+ val |= BIT7; /* 100, txclk = DPLL Input */
+ else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
+ val |= BIT5; /* 001, txclk = RXC Input */
+
+ if (info->params.flags & HDLC_FLAG_RXC_BRG)
+ val |= BIT3; /* 010, rxclk = BRG */
+ else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+ val |= BIT4; /* 100, rxclk = DPLL */
+ else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
+ val |= BIT2; /* 001, rxclk = TXC Input */
+
+ if (info->params.clock_speed)
+ val |= BIT1 + BIT0;
+
+ wr_reg8(info, CCR, (unsigned char)val);
+
+ if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
+ {
+ // program DPLL mode
+ switch(info->params.encoding)
+ {
+ case HDLC_ENCODING_BIPHASE_MARK:
+ case HDLC_ENCODING_BIPHASE_SPACE:
+ val = BIT7; break;
+ case HDLC_ENCODING_BIPHASE_LEVEL:
+ case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
+ val = BIT7 + BIT6; break;
+ default: val = BIT6; // NRZ encodings
+ }
+ wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
+
+ // DPLL requires a 16X reference clock from BRG
+ set_rate(info, info->params.clock_speed * 16);
+ }
+ else
+ set_rate(info, info->params.clock_speed);
+
+ tx_set_idle(info);
+
+ msc_set_vcr(info);
+
+ /* SCR (serial control)
+ *
+ * 15 1=tx req on FIFO half empty
+ * 14 1=rx req on FIFO half full
+ * 13 tx data IRQ enable
+ * 12 tx idle IRQ enable
+ * 11 underrun IRQ enable
+ * 10 rx data IRQ enable
+ * 09 rx idle IRQ enable
+ * 08 overrun IRQ enable
+ * 07 DSR IRQ enable
+ * 06 CTS IRQ enable
+ * 05 DCD IRQ enable
+ * 04 RI IRQ enable
+ * 03 reserved, must be zero
+ * 02 1=txd->rxd internal loopback enable
+ * 01 reserved, must be zero
+ * 00 1=master IRQ enable
+ */
+ wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
+
+ if (info->params.loopback)
+ enable_loopback(info);
+}
+
+/*
+ * set transmit idle mode
+ */
+static void tx_set_idle(struct slgt_info *info)
+{
+ unsigned char val;
+ unsigned short tcr;
+
+ /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
+ * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
+ */
+ tcr = rd_reg16(info, TCR);
+ if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
+ /* disable preamble, set idle size to 16 bits */
+ tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
+ /* MSB of 16 bit idle specified in tx preamble register (TPR) */
+ wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
+ } else if (!(tcr & BIT6)) {
+ /* preamble is disabled, set idle size to 8 bits */
+ tcr &= ~(BIT5 + BIT4);
+ }
+ wr_reg16(info, TCR, tcr);
+
+ if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
+ /* LSB of custom tx idle specified in tx idle register */
+ val = (unsigned char)(info->idle_mode & 0xff);
+ } else {
+ /* standard 8 bit idle patterns */
+ switch(info->idle_mode)
+ {
+ case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
+ case HDLC_TXIDLE_ALT_ZEROS_ONES:
+ case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
+ case HDLC_TXIDLE_ZEROS:
+ case HDLC_TXIDLE_SPACE: val = 0x00; break;
+ default: val = 0xff;
+ }
+ }
+
+ wr_reg8(info, TIR, val);
+}
+
+/*
+ * get state of V24 status (input) signals
+ */
+static void get_signals(struct slgt_info *info)
+{
+ unsigned short status = rd_reg16(info, SSR);
+
+ /* clear all serial signals except DTR and RTS */
+ info->signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+ if (status & BIT3)
+ info->signals |= SerialSignal_DSR;
+ if (status & BIT2)
+ info->signals |= SerialSignal_CTS;
+ if (status & BIT1)
+ info->signals |= SerialSignal_DCD;
+ if (status & BIT0)
+ info->signals |= SerialSignal_RI;
+}
+
+/*
+ * set V.24 Control Register based on current configuration
+ */
+static void msc_set_vcr(struct slgt_info *info)
+{
+ unsigned char val = 0;
+
+ /* VCR (V.24 control)
+ *
+ * 07..04 serial IF select
+ * 03 DTR
+ * 02 RTS
+ * 01 LL
+ * 00 RL
+ */
+
+ switch(info->if_mode & MGSL_INTERFACE_MASK)
+ {
+ case MGSL_INTERFACE_RS232:
+ val |= BIT5; /* 0010 */
+ break;
+ case MGSL_INTERFACE_V35:
+ val |= BIT7 + BIT6 + BIT5; /* 1110 */
+ break;
+ case MGSL_INTERFACE_RS422:
+ val |= BIT6; /* 0100 */
+ break;
+ }
+
+ if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
+ val |= BIT4;
+ if (info->signals & SerialSignal_DTR)
+ val |= BIT3;
+ if (info->signals & SerialSignal_RTS)
+ val |= BIT2;
+ if (info->if_mode & MGSL_INTERFACE_LL)
+ val |= BIT1;
+ if (info->if_mode & MGSL_INTERFACE_RL)
+ val |= BIT0;
+ wr_reg8(info, VCR, val);
+}
+
+/*
+ * set state of V24 control (output) signals
+ */
+static void set_signals(struct slgt_info *info)
+{
+ unsigned char val = rd_reg8(info, VCR);
+ if (info->signals & SerialSignal_DTR)
+ val |= BIT3;
+ else
+ val &= ~BIT3;
+ if (info->signals & SerialSignal_RTS)
+ val |= BIT2;
+ else
+ val &= ~BIT2;
+ wr_reg8(info, VCR, val);
+}
+
+/*
+ * free range of receive DMA buffers (i to last)
+ */
+static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
+{
+ int done = 0;
+
+ while(!done) {
+ /* reset current buffer for reuse */
+ info->rbufs[i].status = 0;
+ set_desc_count(info->rbufs[i], info->rbuf_fill_level);
+ if (i == last)
+ done = 1;
+ if (++i == info->rbuf_count)
+ i = 0;
+ }
+ info->rbuf_current = i;
+}
+
+/*
+ * mark all receive DMA buffers as free
+ */
+static void reset_rbufs(struct slgt_info *info)
+{
+ free_rbufs(info, 0, info->rbuf_count - 1);
+ info->rbuf_fill_index = 0;
+ info->rbuf_fill_count = 0;
+}
+
+/*
+ * pass receive HDLC frame to upper layer
+ *
+ * return true if frame available, otherwise false
+ */
+static bool rx_get_frame(struct slgt_info *info)
+{
+ unsigned int start, end;
+ unsigned short status;
+ unsigned int framesize = 0;
+ unsigned long flags;
+ struct tty_struct *tty = info->port.tty;
+ unsigned char addr_field = 0xff;
+ unsigned int crc_size = 0;
+
+ switch (info->params.crc_type & HDLC_CRC_MASK) {
+ case HDLC_CRC_16_CCITT: crc_size = 2; break;
+ case HDLC_CRC_32_CCITT: crc_size = 4; break;
+ }
+
+check_again:
+
+ framesize = 0;
+ addr_field = 0xff;
+ start = end = info->rbuf_current;
+
+ for (;;) {
+ if (!desc_complete(info->rbufs[end]))
+ goto cleanup;
+
+ if (framesize == 0 && info->params.addr_filter != 0xff)
+ addr_field = info->rbufs[end].buf[0];
+
+ framesize += desc_count(info->rbufs[end]);
+
+ if (desc_eof(info->rbufs[end]))
+ break;
+
+ if (++end == info->rbuf_count)
+ end = 0;
+
+ if (end == info->rbuf_current) {
+ if (info->rx_enabled){
+ spin_lock_irqsave(&info->lock,flags);
+ rx_start(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+ }
+ goto cleanup;
+ }
+ }
+
+ /* status
+ *
+ * 15 buffer complete
+ * 14..06 reserved
+ * 05..04 residue
+ * 02 eof (end of frame)
+ * 01 CRC error
+ * 00 abort
+ */
+ status = desc_status(info->rbufs[end]);
+
+ /* ignore CRC bit if not using CRC (bit is undefined) */
+ if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
+ status &= ~BIT1;
+
+ if (framesize == 0 ||
+ (addr_field != 0xff && addr_field != info->params.addr_filter)) {
+ free_rbufs(info, start, end);
+ goto check_again;
+ }
+
+ if (framesize < (2 + crc_size) || status & BIT0) {
+ info->icount.rxshort++;
+ framesize = 0;
+ } else if (status & BIT1) {
+ info->icount.rxcrc++;
+ if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
+ framesize = 0;
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ if (framesize == 0) {
+ info->netdev->stats.rx_errors++;
+ info->netdev->stats.rx_frame_errors++;
+ }
+#endif
+
+ DBGBH(("%s rx frame status=%04X size=%d\n",
+ info->device_name, status, framesize));
+ DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
+
+ if (framesize) {
+ if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
+ framesize -= crc_size;
+ crc_size = 0;
+ }
+
+ if (framesize > info->max_frame_size + crc_size)
+ info->icount.rxlong++;
+ else {
+ /* copy dma buffer(s) to contiguous temp buffer */
+ int copy_count = framesize;
+ int i = start;
+ unsigned char *p = info->tmp_rbuf;
+ info->tmp_rbuf_count = framesize;
+
+ info->icount.rxok++;
+
+ while(copy_count) {
+ int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
+ memcpy(p, info->rbufs[i].buf, partial_count);
+ p += partial_count;
+ copy_count -= partial_count;
+ if (++i == info->rbuf_count)
+ i = 0;
+ }
+
+ if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
+ *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
+ framesize++;
+ }
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_rx(info,info->tmp_rbuf, framesize);
+ else
+#endif
+ ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
+ }
+ }
+ free_rbufs(info, start, end);
+ return true;
+
+cleanup:
+ return false;
+}
+
+/*
+ * pass receive buffer (RAW synchronous mode) to tty layer
+ * return true if buffer available, otherwise false
+ */
+static bool rx_get_buf(struct slgt_info *info)
+{
+ unsigned int i = info->rbuf_current;
+ unsigned int count;
+
+ if (!desc_complete(info->rbufs[i]))
+ return false;
+ count = desc_count(info->rbufs[i]);
+ switch(info->params.mode) {
+ case MGSL_MODE_MONOSYNC:
+ case MGSL_MODE_BISYNC:
+ case MGSL_MODE_XSYNC:
+ /* ignore residue in byte synchronous modes */
+ if (desc_residue(info->rbufs[i]))
+ count--;
+ break;
+ }
+ DBGDATA(info, info->rbufs[i].buf, count, "rx");
+ DBGINFO(("rx_get_buf size=%d\n", count));
+ if (count)
+ ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
+ info->flag_buf, count);
+ free_rbufs(info, i, i);
+ return true;
+}
+
+static void reset_tbufs(struct slgt_info *info)
+{
+ unsigned int i;
+ info->tbuf_current = 0;
+ for (i=0 ; i < info->tbuf_count ; i++) {
+ info->tbufs[i].status = 0;
+ info->tbufs[i].count = 0;
+ }
+}
+
+/*
+ * return number of free transmit DMA buffers
+ */
+static unsigned int free_tbuf_count(struct slgt_info *info)
+{
+ unsigned int count = 0;
+ unsigned int i = info->tbuf_current;
+
+ do
+ {
+ if (desc_count(info->tbufs[i]))
+ break; /* buffer in use */
+ ++count;
+ if (++i == info->tbuf_count)
+ i=0;
+ } while (i != info->tbuf_current);
+
+ /* if tx DMA active, last zero count buffer is in use */
+ if (count && (rd_reg32(info, TDCSR) & BIT0))
+ --count;
+
+ return count;
+}
+
+/*
+ * return number of bytes in unsent transmit DMA buffers
+ * and the serial controller tx FIFO
+ */
+static unsigned int tbuf_bytes(struct slgt_info *info)
+{
+ unsigned int total_count = 0;
+ unsigned int i = info->tbuf_current;
+ unsigned int reg_value;
+ unsigned int count;
+ unsigned int active_buf_count = 0;
+
+ /*
+ * Add descriptor counts for all tx DMA buffers.
+ * If count is zero (cleared by DMA controller after read),
+ * the buffer is complete or is actively being read from.
+ *
+ * Record buf_count of last buffer with zero count starting
+ * from current ring position. buf_count is mirror
+ * copy of count and is not cleared by serial controller.
+ * If DMA controller is active, that buffer is actively
+ * being read so add to total.
+ */
+ do {
+ count = desc_count(info->tbufs[i]);
+ if (count)
+ total_count += count;
+ else if (!total_count)
+ active_buf_count = info->tbufs[i].buf_count;
+ if (++i == info->tbuf_count)
+ i = 0;
+ } while (i != info->tbuf_current);
+
+ /* read tx DMA status register */
+ reg_value = rd_reg32(info, TDCSR);
+
+ /* if tx DMA active, last zero count buffer is in use */
+ if (reg_value & BIT0)
+ total_count += active_buf_count;
+
+ /* add tx FIFO count = reg_value[15..8] */
+ total_count += (reg_value >> 8) & 0xff;
+
+ /* if transmitter active add one byte for shift register */
+ if (info->tx_active)
+ total_count++;
+
+ return total_count;
+}
+
+/*
+ * load data into transmit DMA buffer ring and start transmitter if needed
+ * return true if data accepted, otherwise false (buffers full)
+ */
+static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
+{
+ unsigned short count;
+ unsigned int i;
+ struct slgt_desc *d;
+
+ /* check required buffer space */
+ if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
+ return false;
+
+ DBGDATA(info, buf, size, "tx");
+
+ /*
+ * copy data to one or more DMA buffers in circular ring
+ * tbuf_start = first buffer for this data
+ * tbuf_current = next free buffer
+ *
+ * Copy all data before making data visible to DMA controller by
+ * setting descriptor count of the first buffer.
+ * This prevents an active DMA controller from reading the first DMA
+ * buffers of a frame and stopping before the final buffers are filled.
+ */
+
+ info->tbuf_start = i = info->tbuf_current;
+
+ while (size) {
+ d = &info->tbufs[i];
+
+ count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
+ memcpy(d->buf, buf, count);
+
+ size -= count;
+ buf += count;
+
+ /*
+ * set EOF bit for last buffer of HDLC frame or
+ * for every buffer in raw mode
+ */
+ if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
+ info->params.mode == MGSL_MODE_RAW)
+ set_desc_eof(*d, 1);
+ else
+ set_desc_eof(*d, 0);
+
+ /* set descriptor count for all but first buffer */
+ if (i != info->tbuf_start)
+ set_desc_count(*d, count);
+ d->buf_count = count;
+
+ if (++i == info->tbuf_count)
+ i = 0;
+ }
+
+ info->tbuf_current = i;
+
+ /* set first buffer count to make new data visible to DMA controller */
+ d = &info->tbufs[info->tbuf_start];
+ set_desc_count(*d, d->buf_count);
+
+ /* start transmitter if needed and update transmit timeout */
+ if (!info->tx_active)
+ tx_start(info);
+ update_tx_timer(info);
+
+ return true;
+}
+
+static int register_test(struct slgt_info *info)
+{
+ static unsigned short patterns[] =
+ {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
+ static unsigned int count = ARRAY_SIZE(patterns);
+ unsigned int i;
+ int rc = 0;
+
+ for (i=0 ; i < count ; i++) {
+ wr_reg16(info, TIR, patterns[i]);
+ wr_reg16(info, BDR, patterns[(i+1)%count]);
+ if ((rd_reg16(info, TIR) != patterns[i]) ||
+ (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
+ rc = -ENODEV;
+ break;
+ }
+ }
+ info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
+ info->init_error = rc ? 0 : DiagStatus_AddressFailure;
+ return rc;
+}
+
+static int irq_test(struct slgt_info *info)
+{
+ unsigned long timeout;
+ unsigned long flags;
+ struct tty_struct *oldtty = info->port.tty;
+ u32 speed = info->params.data_rate;
+
+ info->params.data_rate = 921600;
+ info->port.tty = NULL;
+
+ spin_lock_irqsave(&info->lock, flags);
+ async_mode(info);
+ slgt_irq_on(info, IRQ_TXIDLE);
+
+ /* enable transmitter */
+ wr_reg16(info, TCR,
+ (unsigned short)(rd_reg16(info, TCR) | BIT1));
+
+ /* write one byte and wait for tx idle */
+ wr_reg16(info, TDR, 0);
+
+ /* assume failure */
+ info->init_error = DiagStatus_IrqFailure;
+ info->irq_occurred = false;
+
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ timeout=100;
+ while(timeout-- && !info->irq_occurred)
+ msleep_interruptible(10);
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_port(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ info->params.data_rate = speed;
+ info->port.tty = oldtty;
+
+ info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
+ return info->irq_occurred ? 0 : -ENODEV;
+}
+
+static int loopback_test_rx(struct slgt_info *info)
+{
+ unsigned char *src, *dest;
+ int count;
+
+ if (desc_complete(info->rbufs[0])) {
+ count = desc_count(info->rbufs[0]);
+ src = info->rbufs[0].buf;
+ dest = info->tmp_rbuf;
+
+ for( ; count ; count-=2, src+=2) {
+ /* src=data byte (src+1)=status byte */
+ if (!(*(src+1) & (BIT9 + BIT8))) {
+ *dest = *src;
+ dest++;
+ info->tmp_rbuf_count++;
+ }
+ }
+ DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
+ return 1;
+ }
+ return 0;
+}
+
+static int loopback_test(struct slgt_info *info)
+{
+#define TESTFRAMESIZE 20
+
+ unsigned long timeout;
+ u16 count = TESTFRAMESIZE;
+ unsigned char buf[TESTFRAMESIZE];
+ int rc = -ENODEV;
+ unsigned long flags;
+
+ struct tty_struct *oldtty = info->port.tty;
+ MGSL_PARAMS params;
+
+ memcpy(&params, &info->params, sizeof(params));
+
+ info->params.mode = MGSL_MODE_ASYNC;
+ info->params.data_rate = 921600;
+ info->params.loopback = 1;
+ info->port.tty = NULL;
+
+ /* build and send transmit frame */
+ for (count = 0; count < TESTFRAMESIZE; ++count)
+ buf[count] = (unsigned char)count;
+
+ info->tmp_rbuf_count = 0;
+ memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
+
+ /* program hardware for HDLC and enabled receiver */
+ spin_lock_irqsave(&info->lock,flags);
+ async_mode(info);
+ rx_start(info);
+ tx_load(info, buf, count);
+ spin_unlock_irqrestore(&info->lock, flags);
+
+ /* wait for receive complete */
+ for (timeout = 100; timeout; --timeout) {
+ msleep_interruptible(10);
+ if (loopback_test_rx(info)) {
+ rc = 0;
+ break;
+ }
+ }
+
+ /* verify received frame length and contents */
+ if (!rc && (info->tmp_rbuf_count != count ||
+ memcmp(buf, info->tmp_rbuf, count))) {
+ rc = -ENODEV;
+ }
+
+ spin_lock_irqsave(&info->lock,flags);
+ reset_adapter(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+ memcpy(&info->params, &params, sizeof(info->params));
+ info->port.tty = oldtty;
+
+ info->init_error = rc ? DiagStatus_DmaFailure : 0;
+ return rc;
+}
+
+static int adapter_test(struct slgt_info *info)
+{
+ DBGINFO(("testing %s\n", info->device_name));
+ if (register_test(info) < 0) {
+ printk("register test failure %s addr=%08X\n",
+ info->device_name, info->phys_reg_addr);
+ } else if (irq_test(info) < 0) {
+ printk("IRQ test failure %s IRQ=%d\n",
+ info->device_name, info->irq_level);
+ } else if (loopback_test(info) < 0) {
+ printk("loopback test failure %s\n", info->device_name);
+ }
+ return info->init_error;
+}
+
+/*
+ * transmit timeout handler
+ */
+static void tx_timeout(unsigned long context)
+{
+ struct slgt_info *info = (struct slgt_info*)context;
+ unsigned long flags;
+
+ DBGINFO(("%s tx_timeout\n", info->device_name));
+ if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
+ info->icount.txtimeout++;
+ }
+ spin_lock_irqsave(&info->lock,flags);
+ tx_stop(info);
+ spin_unlock_irqrestore(&info->lock,flags);
+
+#if SYNCLINK_GENERIC_HDLC
+ if (info->netcount)
+ hdlcdev_tx_done(info);
+ else
+#endif
+ bh_transmit(info);
+}
+
+/*
+ * receive buffer polling timer
+ */
+static void rx_timeout(unsigned long context)
+{
+ struct slgt_info *info = (struct slgt_info*)context;
+ unsigned long flags;
+
+ DBGINFO(("%s rx_timeout\n", info->device_name));
+ spin_lock_irqsave(&info->lock, flags);
+ info->pending_bh |= BH_RECEIVE;
+ spin_unlock_irqrestore(&info->lock, flags);
+ bh_handler(&info->task);
+}
+