Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

1 files changed, 34 insertions, 24 deletions

diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc12d2f..f17d9f3d84a 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -711,15 +711,11 @@ static void ldisc_receive_buf(struct tty_struct *tty,
 
 /* tty callbacks */
 
-/* Called when a port is opened.  Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
+static int install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	SLMP_INFO *info;
-	int retval, line;
-	unsigned long flags;
+	int line = tty->index;
 
-	line = tty->index;
 	if (line >= synclinkmp_device_count) {
 		printk("%s(%d): open with invalid line #%d.\n",
 			__FILE__,__LINE__,line);
@@ -727,17 +723,30 @@ static int open(struct tty_struct *tty, struct file *filp)
 	}
 
 	info = synclinkmp_device_list;
-	while(info && info->line != line)
+	while (info && info->line != line)
 		info = info->next_device;
 	if (sanity_check(info, tty->name, "open"))
 		return -ENODEV;
-	if ( info->init_error ) {
+	if (info->init_error) {
 		printk("%s(%d):%s device is not allocated, init error=%d\n",
-			__FILE__,__LINE__,info->device_name,info->init_error);
+			__FILE__, __LINE__, info->device_name,
+			info->init_error);
 		return -ENODEV;
 	}
 
 	tty->driver_data = info;
+
+	return tty_port_install(&info->port, driver, tty);
+}
+
+/* Called when a port is opened.  Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+	int retval;
+
 	info->port.tty = tty;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
@@ -873,7 +882,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	/* Handle transition to B0 status */
 	if (old_termios->c_cflag & CBAUD &&
-	    !(tty->termios->c_cflag & CBAUD)) {
+	    !(tty->termios.c_cflag & CBAUD)) {
 		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock,flags);
 	 	set_signals(info);
@@ -882,9 +891,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	/* Handle transition away from B0 status */
 	if (!(old_termios->c_cflag & CBAUD) &&
-	    tty->termios->c_cflag & CBAUD) {
+	    tty->termios.c_cflag & CBAUD) {
 		info->serial_signals |= SerialSignal_DTR;
- 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		if (!(tty->termios.c_cflag & CRTSCTS) ||
  		    !test_bit(TTY_THROTTLED, &tty->flags)) {
 			info->serial_signals |= SerialSignal_RTS;
  		}
@@ -895,7 +904,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	/* Handle turning off CRTSCTS */
 	if (old_termios->c_cflag & CRTSCTS &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
+	    !(tty->termios.c_cflag & CRTSCTS)) {
 		tty->hw_stopped = 0;
 		tx_release(tty);
 	}
@@ -1473,7 +1482,7 @@ static void throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
 
- 	if (tty->termios->c_cflag & CRTSCTS) {
+ 	if (tty->termios.c_cflag & CRTSCTS) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals &= ~SerialSignal_RTS;
 	 	set_signals(info);
@@ -1502,7 +1511,7 @@ static void unthrottle(struct tty_struct * tty)
 			send_xchar(tty, START_CHAR(tty));
 	}
 
- 	if (tty->termios->c_cflag & CRTSCTS) {
+ 	if (tty->termios.c_cflag & CRTSCTS) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals |= SerialSignal_RTS;
 	 	set_signals(info);
@@ -2491,7 +2500,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 			}
 		}
 
-		if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+		if (tty_port_cts_enabled(&info->port) &&
 		     (status & MISCSTATUS_CTS_LATCHED) ) {
 			if ( info->port.tty ) {
 				if (info->port.tty->hw_stopped) {
@@ -2708,7 +2717,7 @@ static void shutdown(SLMP_INFO * info)
 
 	reset_port(info);
 
- 	if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ 	if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
  		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
 		set_signals(info);
 	}
@@ -2749,7 +2758,7 @@ static void program_hw(SLMP_INFO *info)
 
 	get_signals(info);
 
-	if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+	if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock,flags);
@@ -2762,14 +2771,14 @@ static void change_params(SLMP_INFO *info)
 	unsigned cflag;
 	int bits_per_char;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!info->port.tty)
 		return;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):%s change_params()\n",
 			 __FILE__,__LINE__, info->device_name );
 
-	cflag = info->port.tty->termios->c_cflag;
+	cflag = info->port.tty->termios.c_cflag;
 
 	/* if B0 rate (hangup) specified then negate DTR and RTS */
 	/* otherwise assert DTR and RTS */
@@ -3306,7 +3315,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 		return 0;
 	}
 
-	if (tty->termios->c_cflag & CLOCAL)
+	if (tty->termios.c_cflag & CLOCAL)
 		do_clocal = true;
 
 	/* Wait for carrier detect and the line to become
@@ -3332,7 +3341,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 	port->blocked_open++;
 
 	while (1) {
-		if (tty->termios->c_cflag & CBAUD)
+		if (tty->termios.c_cflag & CBAUD)
 			tty_port_raise_dtr_rts(port);
 
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -3357,9 +3366,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 			printk("%s(%d):%s block_til_ready() count=%d\n",
 				 __FILE__,__LINE__, tty->driver->name, port->count );
 
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 
 	set_current_state(TASK_RUNNING);
@@ -3881,6 +3890,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 }
 
 static const struct tty_operations ops = {
+	.install = install,
 	.open = open,
 	.close = close,
 	.write = write,