diff options
author | Jiri Slaby <jslaby@suse.cz> | 2012-03-05 14:52:27 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-03-08 12:30:51 -0800 |
commit | 01bd730d92bd002adc3f3317d8e3328c629b436c (patch) | |
tree | ff7d9a72c32437616834ff6bb6f092e0bd91dbf6 /drivers/tty | |
parent | 12c8035435fa16e3f6b18049bb1d7815c00a7a58 (diff) |
TTY: amiserial/simserial, use flags from tty_port
This changes flags' type to ulong which is appropriate for all the
set/clear_bits performed in the drivers..
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/amiserial.c | 129 |
1 files changed, 66 insertions, 63 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 8ad64a0f125..7d798262d0c 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -45,7 +45,7 @@ #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) #define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s) + tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s) #else #define DBG_CNT(s) #endif @@ -296,7 +296,7 @@ static void receive_chars(struct serial_state *info) printk("handling break...."); #endif flag = TTY_BREAK; - if (info->flags & ASYNC_SAK) + if (info->tport.flags & ASYNC_SAK) do_SAK(tty); } else if (status & UART_LSR_PE) flag = TTY_PARITY; @@ -377,7 +377,7 @@ static void check_modem_status(struct serial_state *info) if (dstatus & SER_DCD) { icount->dcd++; #ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && + if ((info->tport.flags & ASYNC_HARDPPS_CD) && !(status & SER_DCD)) hardpps(); #endif @@ -387,7 +387,7 @@ static void check_modem_status(struct serial_state *info) wake_up_interruptible(&info->tport.delta_msr_wait); } - if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { + if ((info->tport.flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) { #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) printk("ttyS%d CD now %s...", info->line, (!(status & SER_DCD)) ? "on" : "off"); @@ -402,7 +402,7 @@ static void check_modem_status(struct serial_state *info) tty_hangup(info->tport.tty); } } - if (info->flags & ASYNC_CTS_FLOW) { + if (info->tport.flags & ASYNC_CTS_FLOW) { if (info->tport.tty->hw_stopped) { if (!(status & SER_CTS)) { #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) @@ -503,6 +503,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id) static int startup(struct tty_struct *tty, struct serial_state *info) { + struct tty_port *port = &info->tport; unsigned long flags; int retval=0; unsigned long page; @@ -513,7 +514,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info) local_irq_save(flags); - if (info->flags & ASYNC_INITIALIZED) { + if (port->flags & ASYNC_INITIALIZED) { free_page(page); goto errout; } @@ -560,13 +561,13 @@ static int startup(struct tty_struct *tty, struct serial_state *info) /* * Set up the tty->alt_speed kludge */ - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) tty->alt_speed = 460800; /* @@ -574,7 +575,7 @@ static int startup(struct tty_struct *tty, struct serial_state *info) */ change_speed(tty, info, NULL); - info->flags |= ASYNC_INITIALIZED; + port->flags |= ASYNC_INITIALIZED; local_irq_restore(flags); return 0; @@ -592,7 +593,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) unsigned long flags; struct serial_state *state; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->tport.flags & ASYNC_INITIALIZED)) return; state = info; @@ -633,7 +634,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) set_bit(TTY_IO_ERROR, &tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->tport.flags &= ~ASYNC_INITIALIZED; local_irq_restore(flags); } @@ -645,6 +646,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info) static void change_speed(struct tty_struct *tty, struct serial_state *info, struct ktermios *old_termios) { + struct tty_port *port = &info->tport; int quot = 0, baud_base, baud; unsigned cflag, cval = 0; int bits; @@ -675,8 +677,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, if (!baud) baud = 9600; /* B0 transition handled in rs_set_termios */ baud_base = info->baud_base; - if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + if (baud == 38400 && (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) quot = info->custom_divisor; else { if (baud == 134) @@ -694,7 +695,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, if (!baud) baud = 9600; if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) + (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) quot = info->custom_divisor; else { if (baud == 134) @@ -713,17 +714,17 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info, /* CTS flow control flag and modem status interrupts */ info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) + if (port->flags & ASYNC_HARDPPS_CD) info->IER |= UART_IER_MSI; if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; + port->flags |= ASYNC_CTS_FLOW; info->IER |= UART_IER_MSI; } else - info->flags &= ~ASYNC_CTS_FLOW; + port->flags &= ~ASYNC_CTS_FLOW; if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; + port->flags &= ~ASYNC_CHECK_CD; else { - info->flags |= ASYNC_CHECK_CD; + port->flags |= ASYNC_CHECK_CD; info->IER |= UART_IER_MSI; } /* TBD: @@ -1019,7 +1020,7 @@ static int get_serial_info(struct serial_state *state, tmp.line = state->line; tmp.port = state->port; tmp.irq = state->irq; - tmp.flags = state->flags; + tmp.flags = state->tport.flags; tmp.xmit_fifo_size = state->xmit_fifo_size; tmp.baud_base = state->baud_base; tmp.close_delay = state->tport.close_delay; @@ -1034,6 +1035,7 @@ static int get_serial_info(struct serial_state *state, static int set_serial_info(struct tty_struct *tty, struct serial_state *state, struct serial_struct __user * new_info) { + struct tty_port *port = &state->tport; struct serial_struct new_serial; bool change_spd; int retval = 0; @@ -1042,7 +1044,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, return -EFAULT; tty_lock(); - change_spd = ((new_serial.flags ^ state->flags) & ASYNC_SPD_MASK) || + change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) || new_serial.custom_divisor != state->custom_divisor; if (new_serial.irq != state->irq || new_serial.port != state->port || new_serial.xmit_fifo_size != state->xmit_fifo_size) { @@ -1052,12 +1054,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, if (!serial_isroot()) { if ((new_serial.baud_base != state->baud_base) || - (new_serial.close_delay != state->tport.close_delay) || + (new_serial.close_delay != port->close_delay) || (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ((new_serial.flags & ~ASYNC_USR_MASK) != - (state->flags & ~ASYNC_USR_MASK))) + (port->flags & ~ASYNC_USR_MASK))) return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | + port->flags = ((port->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); state->custom_divisor = new_serial.custom_divisor; goto check_and_exit; @@ -1074,23 +1076,23 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, */ state->baud_base = new_serial.baud_base; - state->flags = ((state->flags & ~ASYNC_FLAGS) | + port->flags = ((port->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->tport.close_delay = new_serial.close_delay * HZ/100; - state->tport.closing_wait = new_serial.closing_wait * HZ/100; - tty->low_latency = (state->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + port->close_delay = new_serial.close_delay * HZ/100; + port->closing_wait = new_serial.closing_wait * HZ/100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: - if (state->flags & ASYNC_INITIALIZED) { + if (port->flags & ASYNC_INITIALIZED) { if (change_spd) { - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) tty->alt_speed = 57600; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) tty->alt_speed = 115200; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) tty->alt_speed = 230400; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) tty->alt_speed = 460800; change_speed(tty, state, NULL); } @@ -1407,7 +1409,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) local_irq_restore(flags); return; } - state->flags |= ASYNC_CLOSING; + state->tport.flags |= ASYNC_CLOSING; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. @@ -1422,7 +1424,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) * line status register. */ state->read_status_mask &= ~UART_LSR_DR; - if (state->flags & ASYNC_INITIALIZED) { + if (state->tport.flags & ASYNC_INITIALIZED) { /* disable receive interrupts */ custom.intena = IF_RBF; mb(); @@ -1449,7 +1451,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) } wake_up_interruptible(&state->tport.open_wait); } - state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + state->tport.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&state->tport.close_wait); local_irq_restore(flags); } @@ -1530,7 +1532,7 @@ static void rs_hangup(struct tty_struct *tty) rs_flush_buffer(tty); shutdown(tty, info); info->tport.count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tport.flags &= ~ASYNC_NORMAL_ACTIVE; info->tport.tty = NULL; wake_up_interruptible(&info->tport.open_wait); } @@ -1548,6 +1550,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, #else struct wait_queue wait = { current, NULL }; #endif + struct tty_port *port = &info->tport; int retval; int do_clocal = 0, extra_count = 0; unsigned long flags; @@ -1557,11 +1560,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, * until it's done, and then try again. */ if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->tport.close_wait); + (port->flags & ASYNC_CLOSING)) { + if (port->flags & ASYNC_CLOSING) + interruptible_sleep_on(&port->close_wait); #ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? + return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); #else return -EAGAIN; @@ -1574,7 +1577,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -1584,23 +1587,23 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, info->tport.count is dropped by one, so that + * this loop, port->count is dropped by one, so that * rs_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&info->tport.open_wait, &wait); + add_wait_queue(&port->open_wait, &wait); #ifdef SERIAL_DEBUG_OPEN printk("block_til_ready before block: ttys%d, count = %d\n", - info->line, info->tport.count); + info->line, port->count); #endif local_irq_save(flags); if (!tty_hung_up_p(filp)) { extra_count = 1; - info->tport.count--; + port->count--; } local_irq_restore(flags); - info->tport.blocked_open++; + port->blocked_open++; while (1) { local_irq_save(flags); if (tty->termios->c_cflag & CBAUD) @@ -1608,9 +1611,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, local_irq_restore(flags); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { + !(port->flags & ASYNC_INITIALIZED)) { #ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) + if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; @@ -1619,7 +1622,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, #endif break; } - if (!(info->flags & ASYNC_CLOSING) && + if (!(port->flags & ASYNC_CLOSING) && (do_clocal || (!(ciab.pra & SER_DCD)) )) break; if (signal_pending(current)) { @@ -1628,24 +1631,24 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, } #ifdef SERIAL_DEBUG_OPEN printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, info->tport.count); + info->line, port->count); #endif tty_unlock(); schedule(); tty_lock(); } __set_current_state(TASK_RUNNING); - remove_wait_queue(&info->tport.open_wait, &wait); + remove_wait_queue(&port->open_wait, &wait); if (extra_count) - info->tport.count++; - info->tport.blocked_open--; + port->count++; + port->blocked_open--; #ifdef SERIAL_DEBUG_OPEN printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, info->tport.count); + info->line, port->count); #endif if (retval) return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; + port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -1670,17 +1673,17 @@ static int rs_open(struct tty_struct *tty, struct file * filp) #ifdef SERIAL_DEBUG_OPEN printk("rs_open %s, count = %d\n", tty->name, info->count); #endif - tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (info->tport.flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) + (info->tport.flags & ASYNC_CLOSING)) { + if (info->tport.flags & ASYNC_CLOSING) interruptible_sleep_on(&info->tport.close_wait); #ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? + return ((info->tport.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); #else return -EAGAIN; @@ -1723,7 +1726,7 @@ static inline void line_info(struct seq_file *m, struct serial_state *state) local_irq_save(flags); status = ciab.pra; - control = (state->flags & ASYNC_INITIALIZED) ? state->MCR : status; + control = (state->tport.flags & ASYNC_INITIALIZED) ? state->MCR : status; local_irq_restore(flags); stat_buf[0] = 0; |