Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)

3 files changed, 24 insertions, 17 deletions

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index c89990f5e01..101ffc965ee 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -866,50 +866,50 @@ static void cxacru_poll_status(struct work_struct *work)
 	instance->line_status = buf[CXINF_LINE_STATUS];
 	switch (instance->line_status) {
 	case 0:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: down\n");
 		break;
 
 	case 1:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: attempting to activate\n");
 		break;
 
 	case 2:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: training\n");
 		break;
 
 	case 3:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: channel analysis\n");
 		break;
 
 	case 4:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: exchange\n");
 		break;
 
 	case 5:
 		atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
-		atm_dev->signal = ATM_PHY_SIG_FOUND;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
 
 		atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
 		     buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
 		break;
 
 	case 6:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: waiting\n");
 		break;
 
 	case 7:
-		atm_dev->signal = ATM_PHY_SIG_LOST;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 		atm_info(usbatm, "ADSL line: initializing\n");
 		break;
 
 	default:
-		atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+		atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
 		atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
 		break;
 	}
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 1335456b4f9..80f9617d3a1 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -525,7 +525,7 @@ static void speedtch_check_status(struct work_struct *work)
 
 		switch (status) {
 		case 0:
-			atm_dev->signal = ATM_PHY_SIG_LOST;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 			if (instance->last_status)
 				atm_info(usbatm, "ADSL line is down\n");
 			/* It may never resync again unless we ask it to... */
@@ -533,12 +533,12 @@ static void speedtch_check_status(struct work_struct *work)
 			break;
 
 		case 0x08:
-			atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
 			atm_info(usbatm, "ADSL line is blocked?\n");
 			break;
 
 		case 0x10:
-			atm_dev->signal = ATM_PHY_SIG_LOST;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
 			atm_info(usbatm, "ADSL line is synchronising\n");
 			break;
 
@@ -554,7 +554,7 @@ static void speedtch_check_status(struct work_struct *work)
 			}
 
 			atm_dev->link_rate = down_speed * 1000 / 424;
-			atm_dev->signal = ATM_PHY_SIG_FOUND;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
 
 			atm_info(usbatm,
 				 "ADSL line is up (%d kb/s down | %d kb/s up)\n",
@@ -562,7 +562,7 @@ static void speedtch_check_status(struct work_struct *work)
 			break;
 
 		default:
-			atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+			atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
 			atm_info(usbatm, "unknown line state %02x\n", status);
 			break;
 		}
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index e213d3fa492..ebae9448014 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -575,6 +575,13 @@ MODULE_PARM_DESC(annex,
 			sc->usbatm->atm_dev->type = val; \
 	} while (0)
 
+#define UPDATE_ATM_SIGNAL(val) \
+	do { \
+		if (sc->usbatm->atm_dev) \
+			atm_dev_signal_change(sc->usbatm->atm_dev, val); \
+	} while (0)
+
+
 /* Firmware loading */
 #define LOAD_INTERNAL     0xA0
 #define F8051_USBCS       0x7f92
@@ -1359,7 +1366,7 @@ static int uea_stat_e1(struct uea_softc *sc)
 	/* always update it as atm layer could not be init when we switch to
 	 * operational state
 	 */
-	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
 
 	/* wake up processes waiting for synchronization */
 	wake_up(&sc->sync_q);
@@ -1498,7 +1505,7 @@ static int uea_stat_e4(struct uea_softc *sc)
 	/* always update it as atm layer could not be init when we switch to
 	 * operational state
 	 */
-	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND);
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_FOUND);
 
 	/* wake up processes waiting for synchronization */
 	wake_up(&sc->sync_q);
@@ -1825,7 +1832,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	 * So we will failed to wait Ready CMV.
 	 */
 	sc->cmv_ack = 0;
-	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
+	UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
 
 	/* reset statistics */
 	memset(&sc->stats, 0, sizeof(struct uea_stats));