Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 31 insertions, 21 deletions

diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 4a752e730c5..9e9f122162f 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -59,7 +59,7 @@
 	.offset	= DWC3_ ##nm - DWC3_GLOBALS_REGS_START,	\
 }
 
-static struct debugfs_reg32 dwc3_regs[] = {
+static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GSBUSCFG0),
 	dump_register(GSBUSCFG1),
 	dump_register(GTXTHRCFG),
@@ -372,6 +372,7 @@ static struct debugfs_reg32 dwc3_regs[] = {
 
 	dump_register(OCFG),
 	dump_register(OCTL),
+	dump_register(OEVT),
 	dump_register(OEVTEN),
 	dump_register(OSTS),
 };
@@ -577,8 +578,14 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)
 	case DWC3_LINK_STATE_LPBK:
 		seq_printf(s, "Loopback\n");
 		break;
+	case DWC3_LINK_STATE_RESET:
+		seq_printf(s, "Reset\n");
+		break;
+	case DWC3_LINK_STATE_RESUME:
+		seq_printf(s, "Resume\n");
+		break;
 	default:
-		seq_printf(s, "UNKNOWN %d\n", reg);
+		seq_printf(s, "UNKNOWN %d\n", state);
 	}
 
 	return 0;
@@ -661,28 +668,31 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
 		goto err1;
 	}
 
-#if IS_ENABLED(CONFIG_USB_DWC3_GADGET)
-	file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_mode_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_testmode_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
+		file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_mode_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
 	}
 
-	file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
-			dwc, &dwc3_link_state_fops);
-	if (!file) {
-		ret = -ENOMEM;
-		goto err1;
+	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
+			IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+		file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_testmode_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
+
+		file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
+				dwc, &dwc3_link_state_fops);
+		if (!file) {
+			ret = -ENOMEM;
+			goto err1;
+		}
 	}
-#endif
 
 	return 0;