Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 202 insertions, 0 deletions

diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
new file mode 100644
index 00000000000..1fad1618df6
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -0,0 +1,202 @@
+/**
+ * dwc3-keystone.c - Keystone Specific Glue layer
+ *
+ * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+/* USBSS register offsets */
+#define USBSS_REVISION		0x0000
+#define USBSS_SYSCONFIG		0x0010
+#define USBSS_IRQ_EOI		0x0018
+#define USBSS_IRQSTATUS_RAW_0	0x0020
+#define USBSS_IRQSTATUS_0	0x0024
+#define USBSS_IRQENABLE_SET_0	0x0028
+#define USBSS_IRQENABLE_CLR_0	0x002c
+
+/* IRQ register bits */
+#define USBSS_IRQ_EOI_LINE(n)	BIT(n)
+#define USBSS_IRQ_EVENT_ST	BIT(0)
+#define USBSS_IRQ_COREIRQ_EN	BIT(0)
+#define USBSS_IRQ_COREIRQ_CLR	BIT(0)
+
+static u64 kdwc3_dma_mask;
+
+struct dwc3_keystone {
+	struct device			*dev;
+	struct clk			*clk;
+	void __iomem			*usbss;
+};
+
+static inline u32 kdwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void kdwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+static void kdwc3_enable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val |= USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static void kdwc3_disable_irqs(struct dwc3_keystone *kdwc)
+{
+	u32 val;
+
+	val = kdwc3_readl(kdwc->usbss, USBSS_IRQENABLE_SET_0);
+	val &= ~USBSS_IRQ_COREIRQ_EN;
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, val);
+}
+
+static irqreturn_t dwc3_keystone_interrupt(int irq, void *_kdwc)
+{
+	struct dwc3_keystone	*kdwc = _kdwc;
+
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_CLR_0, USBSS_IRQ_COREIRQ_CLR);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQSTATUS_0, USBSS_IRQ_EVENT_ST);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQENABLE_SET_0, USBSS_IRQ_COREIRQ_EN);
+	kdwc3_writel(kdwc->usbss, USBSS_IRQ_EOI, USBSS_IRQ_EOI_LINE(0));
+
+	return IRQ_HANDLED;
+}
+
+static int kdwc3_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct device_node	*node = pdev->dev.of_node;
+	struct dwc3_keystone	*kdwc;
+	struct resource		*res;
+	int			error, irq;
+
+	kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL);
+	if (!kdwc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kdwc);
+
+	kdwc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "missing usbss resource\n");
+		return -EINVAL;
+	}
+
+	kdwc->usbss = devm_ioremap_resource(dev, res);
+	if (IS_ERR(kdwc->usbss))
+		return PTR_ERR(kdwc->usbss);
+
+	kdwc3_dma_mask = dma_get_mask(dev);
+	dev->dma_mask = &kdwc3_dma_mask;
+
+	kdwc->clk = devm_clk_get(kdwc->dev, "usb");
+
+	error = clk_prepare_enable(kdwc->clk);
+	if (error < 0) {
+		dev_dbg(kdwc->dev, "unable to enable usb clock, err %d\n",
+			error);
+		return error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing irq\n");
+		goto err_irq;
+	}
+
+	error = devm_request_irq(dev, irq, dwc3_keystone_interrupt, IRQF_SHARED,
+			dev_name(dev), kdwc);
+	if (error) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n",
+				irq, error);
+		goto err_irq;
+	}
+
+	kdwc3_enable_irqs(kdwc);
+
+	error = of_platform_populate(node, NULL, NULL, dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create dwc3 core\n");
+		goto err_core;
+	}
+
+	return 0;
+
+err_core:
+	kdwc3_disable_irqs(kdwc);
+err_irq:
+	clk_disable_unprepare(kdwc->clk);
+
+	return error;
+}
+
+static int kdwc3_remove_core(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int kdwc3_remove(struct platform_device *pdev)
+{
+	struct dwc3_keystone *kdwc = platform_get_drvdata(pdev);
+
+	kdwc3_disable_irqs(kdwc);
+	device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core);
+	clk_disable_unprepare(kdwc->clk);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id kdwc3_of_match[] = {
+	{ .compatible = "ti,keystone-dwc3", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, kdwc3_of_match);
+
+static struct platform_driver kdwc3_driver = {
+	.probe		= kdwc3_probe,
+	.remove		= kdwc3_remove,
+	.driver		= {
+		.name	= "keystone-dwc3",
+		.owner	        = THIS_MODULE,
+		.of_match_table	= kdwc3_of_match,
+	},
+};
+
+module_platform_driver(kdwc3_driver);
+
+MODULE_ALIAS("platform:keystone-dwc3");
+MODULE_AUTHOR("WingMan Kwok <w-kwok2@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 KEYSTONE Glue Layer");