diff options
| author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2012-05-03 19:51:36 -0700 |
|---|---|---|
| committer | Nicholas Bellinger <nab@linux-iscsi.org> | 2012-05-09 15:25:59 -0700 |
| commit | c52661d60f636d17e26ad834457db333bd1df494 (patch) | |
| tree | aae98b77a08e526e69f7840932ef6b70a6cfd0e9 /drivers/usb/gadget/Makefile | |
| parent | d5dc28eb92f2a2305a02cb3a5f1ed36542d47512 (diff) | |
usb-gadget: Initial merge of target module for UASP + BOT
This fabric uses the target framework to provide a usb gadget
device. This gadget supports the USB Attached SCSI Protocol (UASP)
and Bulk Only Transfers (BOT or BBB). BOT is the primary interface,
UAS is the alternative interface.
It has been tested with dummy_hcd on HS and SS. On SS USB3 are
supported. I also took my omap device and tried it there against
WindowsXP. UAS implements basic command passing (i.e. read/write
requests) and TASK MANAGEMENT functions are missing.
I had to add a little of error recovery to BOT because Windows was
issuing some strange commands and it does not complain after the
gadget responded with CSW.status=1.
(nab: Move to drivers/usb/gadget as per Sebastian to address legacy
limitations for built-in gadget code)
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Diffstat (limited to 'drivers/usb/gadget/Makefile')
| -rw-r--r-- | drivers/usb/gadget/Makefile | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index b7f6eefc392..fc5b83683de 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -52,6 +52,7 @@ g_nokia-y := nokia.o g_webcam-y := webcam.o g_ncm-y := ncm.o g_acm_ms-y := acm_ms.o +g_tcm_usb_gadget-y := tcm_usb_gadget.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -71,3 +72,4 @@ obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o +obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o |