USB gadget: Handle endpoint requests at the function level

Control requests targeted at an endpoint (that is sent to EP0 but
specifying the target endpoint address in wIndex) are dispatched to the
current configuration's setup callback, requiring all gadget drivers to
dispatch the requests to the correct function driver.

To avoid this, record which endpoints are used by each function in the
composite driver SET CONFIGURATION handler and dispatch requests
targeted at endpoints to the correct function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 46 insertions, 8 deletions

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d05397ec8a1..8498f1a114d 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -373,6 +373,8 @@ static void reset_config(struct usb_composite_dev *cdev)
 	list_for_each_entry(f, &cdev->config->functions, list) {
 		if (f->disable)
 			f->disable(f);
+
+		bitmap_zero(f->endpoints, 32);
 	}
 	cdev->config = NULL;
 }
@@ -418,10 +420,35 @@ static int set_config(struct usb_composite_dev *cdev,
 	/* Initialize all interfaces by setting them to altsetting zero. */
 	for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
 		struct usb_function	*f = c->interface[tmp];
+		struct usb_descriptor_header **descriptors;
 
 		if (!f)
 			break;
 
+		/*
+		 * Record which endpoints are used by the function. This is used
+		 * to dispatch control requests targeted at that endpoint to the
+		 * function's setup callback instead of the current
+		 * configuration's setup callback.
+		 */
+		if (gadget->speed == USB_SPEED_HIGH)
+			descriptors = f->hs_descriptors;
+		else
+			descriptors = f->descriptors;
+
+		for (; *descriptors; ++descriptors) {
+			struct usb_endpoint_descriptor *ep;
+			int addr;
+
+			if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
+				continue;
+
+			ep = (struct usb_endpoint_descriptor *)*descriptors;
+			addr = ((ep->bEndpointAddress & 0x80) >> 3)
+			     |  (ep->bEndpointAddress & 0x0f);
+			set_bit(addr, f->endpoints);
+		}
+
 		result = f->set_alt(f, tmp, 0);
 		if (result < 0) {
 			DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
@@ -688,6 +715,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u16				w_value = le16_to_cpu(ctrl->wValue);
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 	struct usb_function		*f = NULL;
+	u8				endp;
 
 	/* partial re-init of the response message; the function or the
 	 * gadget might need to intercept e.g. a control-OUT completion
@@ -800,23 +828,33 @@ unknown:
 			ctrl->bRequestType, ctrl->bRequest,
 			w_value, w_index, w_length);
 
-		/* functions always handle their interfaces ... punt other
-		 * recipients (endpoint, other, WUSB, ...) to the current
+		/* functions always handle their interfaces and endpoints...
+		 * punt other recipients (other, WUSB, ...) to the current
 		 * configuration code.
 		 *
 		 * REVISIT it could make sense to let the composite device
 		 * take such requests too, if that's ever needed:  to work
 		 * in config 0, etc.
 		 */
-		if ((ctrl->bRequestType & USB_RECIP_MASK)
-				== USB_RECIP_INTERFACE) {
+		switch (ctrl->bRequestType & USB_RECIP_MASK) {
+		case USB_RECIP_INTERFACE:
 			f = cdev->config->interface[intf];
-			if (f && f->setup)
-				value = f->setup(f, ctrl);
-			else
+			break;
+
+		case USB_RECIP_ENDPOINT:
+			endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
+			list_for_each_entry(f, &cdev->config->functions, list) {
+				if (test_bit(endp, f->endpoints))
+					break;
+			}
+			if (&f->list == &cdev->config->functions)
 				f = NULL;
+			break;
 		}
-		if (value < 0 && !f) {
+
+		if (f && f->setup)
+			value = f->setup(f, ctrl);
+		else {
 			struct usb_configuration	*c;
 
 			c = cdev->config;