diff options
author | Paul Mundt <lethal@linux-sh.org> | 2011-10-28 14:16:43 +0900 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2011-10-28 14:16:43 +0900 |
commit | d4d9781d1dd04ff134e3d43383dfa9991f7c54c6 (patch) | |
tree | 28e799ec49f72bf37f39d192d21f25bffb682aab /drivers/usb/gadget/file_storage.c | |
parent | f5a18f932e051ff0f19dcd80a421a4dd9b11f10f (diff) | |
parent | 396e6e49c58bb23d1814d3c240c736c9f01523c5 (diff) |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-latest
Diffstat (limited to 'drivers/usb/gadget/file_storage.c')
-rw-r--r-- | drivers/usb/gadget/file_storage.c | 254 |
1 files changed, 139 insertions, 115 deletions
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 639e14a2fd1..3ac4f51cd0b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -69,8 +69,7 @@ * each LUN would be settable independently as a disk drive or a CD-ROM * drive, but currently all LUNs have to be the same type. The CD-ROM * emulation includes a single data track and no audio tracks; hence there - * need be only one backing file per LUN. Note also that the CD-ROM block - * length is set to 512 rather than the more common value 2048. + * need be only one backing file per LUN. * * Requirements are modest; only a bulk-in and a bulk-out endpoint are * needed (an interrupt-out endpoint is also needed for CBI). The memory @@ -461,7 +460,6 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; int thread_wakeup_needed; struct completion thread_notifier; @@ -488,6 +486,8 @@ struct fsg_dev { unsigned int nluns; struct fsg_lun *luns; struct fsg_lun *curlun; + /* Must be the last entry */ + struct fsg_buffhd buffhds[]; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -586,7 +586,19 @@ dev_qualifier = { .bNumConfigurations = 1, }; +static int populate_bos(struct fsg_dev *fsg, u8 *buf) +{ + memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); + buf += USB_DT_BOS_SIZE; + + memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); + buf += USB_DT_USB_EXT_CAP_SIZE; + memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); + + return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE + + USB_DT_USB_EXT_CAP_SIZE; +} /* * Config descriptors must agree with the code that sets configurations @@ -935,7 +947,8 @@ static int standard_setup_req(struct fsg_dev *fsg, break; case USB_DT_DEVICE_QUALIFIER: VDBG(fsg, "get device qualifier\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; /* * Assume ep0 uses the same maxpacket value for both @@ -948,7 +961,8 @@ static int standard_setup_req(struct fsg_dev *fsg, case USB_DT_OTHER_SPEED_CONFIG: VDBG(fsg, "get other-speed config descriptor\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; goto get_config; case USB_DT_CONFIG: @@ -967,7 +981,15 @@ get_config: value = usb_gadget_get_string(&fsg_stringtab, w_value & 0xff, req->buf); break; + + case USB_DT_BOS: + VDBG(fsg, "get bos descriptor\n"); + + if (gadget_is_superspeed(fsg->gadget)) + value = populate_bos(fsg, req->buf); + break; } + break; /* One config, two speeds */ @@ -1136,7 +1158,6 @@ static int do_read(struct fsg_dev *fsg) u32 amount_left; loff_t file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nread; /* Get the starting Logical Block Address and check that it's @@ -1158,7 +1179,7 @@ static int do_read(struct fsg_dev *fsg) curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; return -EINVAL; } - file_offset = ((loff_t) lba) << 9; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Carry out the file reads */ amount_left = fsg->data_size_from_cmnd; @@ -1171,17 +1192,10 @@ static int do_read(struct fsg_dev *fsg) * Try to read the remaining amount. * But don't read more than the buffer size. * And don't try to read past the end of the file. - * Finally, if we're not at a page boundary, don't read past - * the next page. - * If this means reading 0 then we were asked to read past - * the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); - partial_page = file_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - - partial_page); /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; @@ -1196,7 +1210,7 @@ static int do_read(struct fsg_dev *fsg) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; bh->inreq->length = 0; bh->state = BUF_STATE_FULL; @@ -1221,18 +1235,23 @@ static int do_read(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file read: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a block + nread = round_down(nread, curlun->blksize); } file_offset += nread; amount_left -= nread; fsg->residue -= nread; + + /* Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ bh->inreq->length = nread; bh->state = BUF_STATE_FULL; /* If an error occurred, report it and its position */ if (nread < amount) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1262,7 +1281,6 @@ static int do_write(struct fsg_dev *fsg) u32 amount_left_to_req, amount_left_to_write; loff_t usb_offset, file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nwritten; int rc; @@ -1303,7 +1321,7 @@ static int do_write(struct fsg_dev *fsg) /* Carry out the file writes */ get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << 9; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; while (amount_left_to_write > 0) { @@ -1313,38 +1331,20 @@ static int do_write(struct fsg_dev *fsg) if (bh->state == BUF_STATE_EMPTY && get_some_more) { /* Figure out how much we want to get: - * Try to get the remaining amount. - * But don't get more than the buffer size. - * And don't try to go past the end of the file. - * If we're not at a page boundary, - * don't go past the next page. - * If this means getting 0, then we were asked - * to write past the end of file. - * Finally, round down to a block boundary. */ + * Try to get the remaining amount, + * but not more than the buffer size. + */ amount = min(amount_left_to_req, mod_data.buflen); - amount = min((loff_t) amount, curlun->file_length - - usb_offset); - partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, - (unsigned int) PAGE_CACHE_SIZE - partial_page); - - if (amount == 0) { + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { get_some_more = 0; curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> 9; + curlun->sense_data_info = usb_offset >> curlun->blkbits; curlun->info_valid = 1; continue; } - amount -= (amount & 511); - if (amount == 0) { - - /* Why were we were asked to transfer a - * partial block? */ - get_some_more = 0; - continue; - } /* Get the next buffer */ usb_offset += amount; @@ -1353,11 +1353,11 @@ static int do_write(struct fsg_dev *fsg) if (amount_left_to_req == 0) get_some_more = 0; - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -1376,7 +1376,7 @@ static int do_write(struct fsg_dev *fsg) /* Did something go wrong with the transfer? */ if (bh->outreq->status != 0) { curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1390,6 +1390,16 @@ static int do_write(struct fsg_dev *fsg) amount = curlun->file_length - file_offset; } + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + /* Perform the write */ file_offset_tmp = file_offset; nwritten = vfs_write(curlun->filp, @@ -1408,8 +1418,7 @@ static int do_write(struct fsg_dev *fsg) } else if (nwritten < amount) { LDBG(curlun, "partial file write: %d/%u\n", (int) nwritten, amount); - nwritten -= (nwritten & 511); - // Round down to a block + nwritten = round_down(nwritten, curlun->blksize); } file_offset += nwritten; amount_left_to_write -= nwritten; @@ -1418,13 +1427,14 @@ static int do_write(struct fsg_dev *fsg) /* If an error occurred, report it and its position */ if (nwritten < amount) { curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } + empty_write: /* Did the host decide to stop early? */ - if (bh->outreq->actual != bh->outreq->length) { + if (bh->outreq->actual < bh->bulk_out_intended_length) { fsg->short_packet_received = 1; break; } @@ -1500,8 +1510,8 @@ static int do_verify(struct fsg_dev *fsg) return -EIO; // No default reply /* Prepare to carry out the file verify */ - amount_left = verification_length << 9; - file_offset = ((loff_t) lba) << 9; + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Write out all the dirty buffers before invalidating them */ fsg_lun_fsync_sub(curlun); @@ -1519,15 +1529,14 @@ static int do_verify(struct fsg_dev *fsg) * Try to read the remaining amount, but not more than * the buffer size. * And don't try to read past the end of the file. - * If this means reading 0 then we were asked to read - * past the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1550,11 +1559,11 @@ static int do_verify(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file verify: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a sector + nread = round_down(nread, curlun->blksize); } if (nread == 0) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1668,7 +1677,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); /* Max logical block */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ return 8; } @@ -1890,7 +1899,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg, put_unaligned_be32(curlun->num_sectors, &buf[0]); /* Number of blocks */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ buf[4] = 0x02; /* Current capacity */ return 12; } @@ -1969,7 +1978,7 @@ static int throw_away_data(struct fsg_dev *fsg) fsg->next_buffhd_to_drain = bh->next; /* A short packet or an error ends everything */ - if (bh->outreq->actual != bh->outreq->length || + if (bh->outreq->actual < bh->bulk_out_intended_length || bh->outreq->status != 0) { raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); return -EINTR; @@ -1983,11 +1992,11 @@ static int throw_away_data(struct fsg_dev *fsg) amount = min(fsg->usb_amount_left, (u32) mod_data.buflen); - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -2415,7 +2424,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, (7<<1) | (1<<4), 1, "READ(6)")) == 0) @@ -2424,7 +2433,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "READ(10)")) == 0) @@ -2433,7 +2442,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "READ(12)")) == 0) @@ -2519,7 +2528,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, (7<<1) | (1<<4), 1, "WRITE(6)")) == 0) @@ -2528,7 +2537,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "WRITE(10)")) == 0) @@ -2537,7 +2546,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "WRITE(12)")) == 0) @@ -2666,7 +2675,6 @@ static int get_next_command(struct fsg_dev *fsg) /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); - bh->outreq->short_not_ok = 1; start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); @@ -2752,7 +2760,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting) reset: /* Deallocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if (bh->inreq) { @@ -2791,29 +2799,32 @@ reset: /* Enable the endpoints */ d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, + &fsg_ss_bulk_in_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) goto reset; fsg->bulk_in_enabled = 1; d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, + &fsg_ss_bulk_out_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) goto reset; fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); if (transport_is_cbi()) { d = fsg_ep_desc(fsg->gadget, - &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc); + &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, + &fsg_ss_intr_in_desc); if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) goto reset; fsg->intr_in_enabled = 1; } /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) @@ -2862,17 +2873,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config) fsg->config = new_config; if ((rc = do_set_interface(fsg, 0)) != 0) fsg->config = 0; // Reset on errors - else { - char *speed; - - switch (fsg->gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - } - INFO(fsg, "%s speed config #%d\n", speed, fsg->config); - } + else + INFO(fsg, "%s config #%d\n", + usb_speed_string(fsg->gadget->speed), + fsg->config); } return rc; } @@ -2909,7 +2913,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Cancel all the pending transfers */ if (fsg->intreq_busy) usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(fsg->bulk_in, bh->inreq); @@ -2920,7 +2924,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Wait until everything is idle */ for (;;) { num_active = fsg->intreq_busy; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2942,7 +2946,7 @@ static void handle_exception(struct fsg_dev *fsg) * state, and the exception. Then invoke the handler. */ spin_lock_irq(&fsg->lock); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -3149,6 +3153,15 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) DBG(fsg, "unbind\n"); clear_bit(REGISTERED, &fsg->atomic_bitflags); + /* If the thread isn't already dead, tell it to exit now */ + if (fsg->state != FSG_STATE_TERMINATED) { + raise_exception(fsg, FSG_STATE_EXIT); + wait_for_completion(&fsg->thread_notifier); + + /* The cleanup routine waits for this completion also */ + complete(&fsg->thread_notifier); + } + /* Unregister the sysfs attribute files and the LUNs */ for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; @@ -3162,17 +3175,8 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) } } - /* If the thread isn't already dead, tell it to exit now */ - if (fsg->state != FSG_STATE_TERMINATED) { - raise_exception(fsg, FSG_STATE_EXIT); - wait_for_completion(&fsg->thread_notifier); - - /* The cleanup routine waits for this completion also */ - complete(&fsg->thread_notifier); - } - /* Free the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) + for (i = 0; i < fsg_num_buffers; ++i) kfree(fsg->buffhds[i].buf); /* Free the request and buffer for endpoint 0 */ @@ -3445,6 +3449,24 @@ static int __init fsg_bind(struct usb_gadget *gadget) fsg_fs_intr_in_desc.bEndpointAddress; } + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); + + /* Assume endpoint addresses are the same for both speeds */ + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + } + if (gadget_is_otg(gadget)) fsg_otg_desc.bmAttributes |= USB_OTG_HNP; @@ -3460,7 +3482,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) req->complete = ep0_complete; /* Allocate the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; /* Allocate for the bulk-in endpoint. We assume that @@ -3471,7 +3493,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) goto out; bh->next = bh + 1; } - fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0]; + fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; /* This should reflect the actual gadget power source */ usb_gadget_set_selfpowered(gadget); @@ -3561,11 +3583,7 @@ static void fsg_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver fsg_driver = { -#ifdef CONFIG_USB_GADGET_DUALSPEED - .speed = USB_SPEED_HIGH, -#else - .speed = USB_SPEED_FULL, -#endif + .speed = USB_SPEED_SUPER, .function = (char *) fsg_string_product, .unbind = fsg_unbind, .disconnect = fsg_disconnect, @@ -3587,7 +3605,9 @@ static int __init fsg_alloc(void) { struct fsg_dev *fsg; - fsg = kzalloc(sizeof *fsg, GFP_KERNEL); + fsg = kzalloc(sizeof *fsg + + fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); + if (!fsg) return -ENOMEM; spin_lock_init(&fsg->lock); @@ -3605,6 +3625,10 @@ static int __init fsg_init(void) int rc; struct fsg_dev *fsg; + rc = fsg_num_buffers_validate(); + if (rc != 0) + return rc; + if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; |