USB: Add Intel Langwell USB Device Controller driver

Intel Langwell USB Device Controller is a High-Speed USB OTG device
controller in Intel Moorestown platform. It can work in OTG device mode
with Intel Langwell USB OTG transceiver driver as well as device-only
mode. The number of programmable endpoints is different through
controller revision.

NOTE:
This patch is the first version Intel Langwell USB OTG device controller
driver. The bug fixing is on going for some hardware and software
issues.  Intel Langwell USB OTG transceiver driver and EHCI driver
patches will be submitted later.

Supported features:
 - USB OTG protocol support with Intel Langwell USB OTG transceiver
   driver (turn on CONFIG_USB_LANGWELL_OTG)
 - Support control, bulk, interrupt and isochronous endpoints
   (isochronous not tested)
 - PCI D0/D3 power management support
 - Link Power Management (LPM) support

Tested gadget drivers:
 - g_file_storage
 - g_ether
 - g_zero

The passed tests:
 - g_file_storage: USBCV Chapter 9 tests
 - g_file_storage: USBCV MSC tests
 - g_file_storage: from/to host files copying
 - g_ether: ping, ftp and scp files from/to host
 - Hotplug, with and without hubs

Known issues:
 - g_ether: failed part of USBCV chap9 tests
 - LPM support not fully tested

TODO:
 - g_ether: pass all USBCV chap9 tests
 - g_zero: pass usbtest tests
 - Stress tests on different gadget drivers
 - On-chip private SRAM caching support

Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 228 insertions, 0 deletions

diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
new file mode 100644
index 00000000000..9719934e1c0
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -0,0 +1,228 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/usb/langwell_udc.h>
+
+#if defined(CONFIG_USB_LANGWELL_OTG)
+#include <linux/usb/langwell_otg.h>
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver data structures and utilities */
+
+/*
+ * dTD: Device Endpoint Transfer Descriptor
+ * describe to the device controller the location and quantity of
+ * data to be send/received for given transfer
+ */
+struct langwell_dtd {
+	u32	dtd_next;
+/* bits 31:5, next transfer element pointer */
+#define	DTD_NEXT(d)	(((d)>>5)&0x7ffffff)
+#define	DTD_NEXT_MASK	(0x7ffffff << 5)
+/* terminate */
+#define	DTD_TERM	BIT(0)
+	/* bits 7:0, execution back states */
+	u32	dtd_status:8;
+#define	DTD_STATUS(d)	(((d)>>0)&0xff)
+#define	DTD_STS_ACTIVE	BIT(7)	/* active */
+#define	DTD_STS_HALTED	BIT(6)	/* halted */
+#define	DTD_STS_DBE	BIT(5)	/* data buffer error */
+#define	DTD_STS_TRE	BIT(3)	/* transaction error  */
+	/* bits 9:8 */
+	u32	dtd_res0:2;
+	/* bits 11:10, multipier override */
+	u32	dtd_multo:2;
+#define	DTD_MULTO	(BIT(11) | BIT(10))
+	/* bits 14:12 */
+	u32	dtd_res1:3;
+	/* bit 15, interrupt on complete */
+	u32	dtd_ioc:1;
+#define	DTD_IOC		BIT(15)
+	/* bits 30:16, total bytes */
+	u32	dtd_total:15;
+#define	DTD_TOTAL(d)	(((d)>>16)&0x7fff)
+#define	DTD_MAX_TRANSFER_LENGTH	0x4000
+	/* bit 31 */
+	u32	dtd_res2:1;
+	/* dTD buffer pointer page 0 to 4 */
+	u32	dtd_buf[5];
+#define	DTD_OFFSET_MASK	0xfff
+/* bits 31:12, buffer pointer */
+#define	DTD_BUFFER(d)	(((d)>>12)&0x3ff)
+/* bits 11:0, current offset */
+#define	DTD_C_OFFSET(d)	(((d)>>0)&0xfff)
+/* bits 10:0, frame number */
+#define	DTD_FRAME(d)	(((d)>>0)&0x7ff)
+
+	/* driver-private parts */
+
+	/* dtd dma address */
+	dma_addr_t		dtd_dma;
+	/* next dtd virtual address */
+	struct langwell_dtd	*next_dtd_virt;
+};
+
+
+/*
+ * dQH: Device Endpoint Queue Head
+ * describe where all transfers are managed
+ * 48-byte data structure, aligned on 64-byte boundary
+ *
+ * These are associated with dTD structure
+ */
+struct langwell_dqh {
+	/* endpoint capabilities and characteristics */
+	u32	dqh_res0:15;	/* bits 14:0 */
+	u32	dqh_ios:1;	/* bit 15, interrupt on setup */
+#define	DQH_IOS		BIT(15)
+	u32	dqh_mpl:11;	/* bits 26:16, maximum packet length */
+#define	DQH_MPL		(0x7ff << 16)
+	u32	dqh_res1:2;	/* bits 28:27 */
+	u32	dqh_zlt:1;	/* bit 29, zero length termination */
+#define	DQH_ZLT		BIT(29)
+	u32	dqh_mult:2;	/* bits 31:30 */
+#define	DQH_MULT	(BIT(30) | BIT(31))
+
+	/* current dTD pointer */
+	u32	dqh_current;	/* locate the transfer in progress */
+#define DQH_C_DTD(e)	\
+	(((e)>>5)&0x7ffffff)	/* bits 31:5, current dTD pointer */
+
+	/* transfer overlay, hardware parts of a struct langwell_dtd */
+	u32	dtd_next;
+	u32	dtd_status:8;	/* bits 7:0, execution back states */
+	u32	dtd_res0:2;	/* bits 9:8 */
+	u32	dtd_multo:2;	/* bits 11:10, multipier override */
+	u32	dtd_res1:3;	/* bits 14:12 */
+	u32	dtd_ioc:1;	/* bit 15, interrupt on complete */
+	u32	dtd_total:15;	/* bits 30:16, total bytes */
+	u32	dtd_res2:1;	/* bit 31 */
+	u32	dtd_buf[5];	/* dTD buffer pointer page 0 to 4 */
+
+	u32	dqh_res2;
+	struct usb_ctrlrequest	dqh_setup;	/* setup packet buffer */
+} __attribute__ ((aligned(64)));
+
+
+/* endpoint data structure */
+struct langwell_ep {
+	struct usb_ep		ep;
+	dma_addr_t		dma;
+	struct langwell_udc	*dev;
+	unsigned long		irqs;
+	struct list_head	queue;
+	struct langwell_dqh	*dqh;
+	const struct usb_endpoint_descriptor	*desc;
+	char			name[14];
+	unsigned		stopped:1,
+				ep_type:2,
+				ep_num:8;
+};
+
+
+/* request data structure */
+struct langwell_request {
+	struct usb_request	req;
+	struct langwell_dtd	*dtd, *head, *tail;
+	struct langwell_ep	*ep;
+	dma_addr_t		dtd_dma;
+	struct list_head	queue;
+	unsigned		dtd_count;
+	unsigned		mapped:1;
+};
+
+
+/* ep0 transfer state */
+enum ep0_state {
+	WAIT_FOR_SETUP,
+	DATA_STATE_XMIT,
+	DATA_STATE_NEED_ZLP,
+	WAIT_FOR_OUT_STATUS,
+	DATA_STATE_RECV,
+};
+
+
+/* device suspend state */
+enum lpm_state {
+	LPM_L0,	/* on */
+	LPM_L1,	/* LPM L1 sleep */
+	LPM_L2,	/* suspend */
+	LPM_L3,	/* off */
+};
+
+
+/* device data structure */
+struct langwell_udc {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget	gadget;
+	spinlock_t		lock;	/* device lock */
+	struct langwell_ep	*ep;
+	struct usb_gadget_driver	*driver;
+	struct otg_transceiver	*transceiver;
+	u8			dev_addr;
+	u32			usb_state;
+	u32			resume_state;
+	u32			bus_reset;
+	enum lpm_state		lpm_state;
+	enum ep0_state		ep0_state;
+	u32			ep0_dir;
+	u16			dciversion;
+	unsigned		ep_max;
+	unsigned		devcap:1,
+				enabled:1,
+				region:1,
+				got_irq:1,
+				powered:1,
+				remote_wakeup:1,
+				rate:1,
+				is_reset:1,
+				softconnected:1,
+				vbus_active:1,
+				suspended:1,
+				stopped:1,
+				lpm:1;	/* LPM capability */
+
+	/* pci state used to access those endpoints */
+	struct pci_dev		*pdev;
+
+	/* Langwell otg transceiver */
+	struct langwell_otg	*lotg;
+
+	/* control registers */
+	struct langwell_cap_regs	__iomem	*cap_regs;
+	struct langwell_op_regs		__iomem	*op_regs;
+
+	struct usb_ctrlrequest	local_setup_buff;
+	struct langwell_dqh	*ep_dqh;
+	size_t			ep_dqh_size;
+	dma_addr_t		ep_dqh_dma;
+
+	/* ep0 status request */
+	struct langwell_request	*status_req;
+
+	/* dma pool */
+	struct dma_pool		*dtd_pool;
+
+	/* make sure release() is done */
+	struct completion	*done;
+};
+