Merge branch 'imx/dt' into next/dt

1 files changed, 601 insertions, 0 deletions

diff --git a/drivers/usb/gadget/net2272.h b/drivers/usb/gadget/net2272.h
new file mode 100644
index 00000000000..e5950578935
--- /dev/null
+++ b/drivers/usb/gadget/net2272.h
@@ -0,0 +1,601 @@
+/*
+ * PLX NET2272 high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __NET2272_H__
+#define __NET2272_H__
+
+/* Main Registers */
+#define REGADDRPTR			0x00
+#define REGDATA				0x01
+#define IRQSTAT0			0x02
+#define 	ENDPOINT_0_INTERRUPT			0
+#define 	ENDPOINT_A_INTERRUPT			1
+#define 	ENDPOINT_B_INTERRUPT			2
+#define 	ENDPOINT_C_INTERRUPT			3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT		4
+#define 	SETUP_PACKET_INTERRUPT			5
+#define 	DMA_DONE_INTERRUPT			6
+#define 	SOF_INTERRUPT				7
+#define IRQSTAT1			0x03
+#define 	CONTROL_STATUS_INTERRUPT		1
+#define 	VBUS_INTERRUPT				2
+#define 	SUSPEND_REQUEST_INTERRUPT		3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT	4
+#define 	RESUME_INTERRUPT			5
+#define 	ROOT_PORT_RESET_INTERRUPT		6
+#define 	RESET_STATUS				7
+#define PAGESEL				0x04
+#define DMAREQ				0x1c
+#define 	DMA_ENDPOINT_SELECT			0
+#define 	DREQ_POLARITY				1
+#define 	DACK_POLARITY				2
+#define 	EOT_POLARITY				3
+#define 	DMA_CONTROL_DACK			4
+#define 	DMA_REQUEST_ENABLE			5
+#define 	DMA_REQUEST				6
+#define 	DMA_BUFFER_VALID			7
+#define SCRATCH				0x1d
+#define IRQENB0				0x20
+#define 	ENDPOINT_0_INTERRUPT_ENABLE		0
+#define 	ENDPOINT_A_INTERRUPT_ENABLE		1
+#define 	ENDPOINT_B_INTERRUPT_ENABLE		2
+#define 	ENDPOINT_C_INTERRUPT_ENABLE		3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE	4
+#define 	SETUP_PACKET_INTERRUPT_ENABLE		5
+#define 	DMA_DONE_INTERRUPT_ENABLE		6
+#define 	SOF_INTERRUPT_ENABLE			7
+#define IRQENB1				0x21
+#define 	VBUS_INTERRUPT_ENABLE			2
+#define 	SUSPEND_REQUEST_INTERRUPT_ENABLE	3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE	4
+#define 	RESUME_INTERRUPT_ENABLE			5
+#define 	ROOT_PORT_RESET_INTERRUPT_ENABLE	6
+#define LOCCTL				0x22
+#define 	DATA_WIDTH				0
+#define 	LOCAL_CLOCK_OUTPUT			1
+#define 		LOCAL_CLOCK_OUTPUT_OFF			0
+#define 		LOCAL_CLOCK_OUTPUT_3_75MHZ		1
+#define 		LOCAL_CLOCK_OUTPUT_7_5MHZ		2
+#define 		LOCAL_CLOCK_OUTPUT_15MHZ		3
+#define 		LOCAL_CLOCK_OUTPUT_30MHZ		4
+#define 		LOCAL_CLOCK_OUTPUT_60MHZ		5
+#define 	DMA_SPLIT_BUS_MODE			4
+#define 	BYTE_SWAP				5
+#define 	BUFFER_CONFIGURATION			6
+#define 		BUFFER_CONFIGURATION_EPA512_EPB512	0
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB512	1
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB1024	2
+#define 		BUFFER_CONFIGURATION_EPA1024DB		3
+#define CHIPREV_LEGACY			0x23
+#define 		NET2270_LEGACY_REV			0x40
+#define LOCCTL1				0x24
+#define 	DMA_MODE				0
+#define 		SLOW_DREQ				0
+#define 		FAST_DREQ				1
+#define 		BURST_MODE				2
+#define 	DMA_DACK_ENABLE				2
+#define CHIPREV_2272			0x25
+#define 		CHIPREV_NET2272_R1			0x10
+#define 		CHIPREV_NET2272_R1A			0x11
+/* USB Registers */
+#define USBCTL0				0x18
+#define 	IO_WAKEUP_ENABLE			1
+#define 	USB_DETECT_ENABLE			3
+#define 	USB_ROOT_PORT_WAKEUP_ENABLE		5
+#define USBCTL1				0x19
+#define 	VBUS_PIN				0
+#define 		USB_FULL_SPEED				1
+#define 		USB_HIGH_SPEED				2
+#define 	GENERATE_RESUME				3
+#define 	VIRTUAL_ENDPOINT_ENABLE			4
+#define FRAME0				0x1a
+#define FRAME1				0x1b
+#define OURADDR				0x30
+#define 	FORCE_IMMEDIATE				7
+#define USBDIAG				0x31
+#define 	FORCE_TRANSMIT_CRC_ERROR		0
+#define 	PREVENT_TRANSMIT_BIT_STUFF		1
+#define 	FORCE_RECEIVE_ERROR			2
+#define 	FAST_TIMES				4
+#define USBTEST				0x32
+#define 	TEST_MODE_SELECT			0
+#define 		NORMAL_OPERATION			0
+#define 		TEST_J					1
+#define 		TEST_K					2
+#define 		TEST_SE0_NAK				3
+#define 		TEST_PACKET				4
+#define 		TEST_FORCE_ENABLE			5
+#define XCVRDIAG			0x33
+#define 	FORCE_FULL_SPEED			2
+#define 	FORCE_HIGH_SPEED			3
+#define 	OPMODE					4
+#define 		NORMAL_OPERATION			0
+#define 		NON_DRIVING				1
+#define 		DISABLE_BITSTUFF_AND_NRZI_ENCODE	2
+#define 	LINESTATE				6
+#define 		SE0_STATE				0
+#define 		J_STATE					1
+#define 		K_STATE					2
+#define 		SE1_STATE				3
+#define VIRTOUT0			0x34
+#define VIRTOUT1			0x35
+#define VIRTIN0				0x36
+#define VIRTIN1				0x37
+#define SETUP0				0x40
+#define SETUP1				0x41
+#define SETUP2				0x42
+#define SETUP3				0x43
+#define SETUP4				0x44
+#define SETUP5				0x45
+#define SETUP6				0x46
+#define SETUP7				0x47
+/* Endpoint Registers (Paged via PAGESEL) */
+#define EP_DATA				0x05
+#define EP_STAT0			0x06
+#define 	DATA_IN_TOKEN_INTERRUPT			0
+#define 	DATA_OUT_TOKEN_INTERRUPT		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT		3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT	4
+#define 	NAK_OUT_PACKETS				5
+#define 	BUFFER_EMPTY				6
+#define 	BUFFER_FULL				7
+#define EP_STAT1			0x07
+#define 	TIMEOUT					0
+#define 	USB_OUT_ACK_SENT			1
+#define 	USB_OUT_NAK_SENT			2
+#define 	USB_IN_ACK_RCVD				3
+#define 	USB_IN_NAK_SENT				4
+#define 	USB_STALL_SENT				5
+#define 	LOCAL_OUT_ZLP				6
+#define 	BUFFER_FLUSH				7
+#define EP_TRANSFER0			0x08
+#define EP_TRANSFER1			0x09
+#define EP_TRANSFER2			0x0a
+#define EP_IRQENB			0x0b
+#define 	DATA_IN_TOKEN_INTERRUPT_ENABLE		0
+#define 	DATA_OUT_TOKEN_INTERRUPT_ENABLE		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT_ENABLE	3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE	4
+#define EP_AVAIL0			0x0c
+#define EP_AVAIL1			0x0d
+#define EP_RSPCLR			0x0e
+#define EP_RSPSET			0x0f
+#define 	ENDPOINT_HALT				0
+#define 	ENDPOINT_TOGGLE				1
+#define 	NAK_OUT_PACKETS_MODE			2
+#define 	CONTROL_STATUS_PHASE_HANDSHAKE		3
+#define 	INTERRUPT_MODE				4
+#define 	AUTOVALIDATE				5
+#define 	HIDE_STATUS_PHASE			6
+#define 	ALT_NAK_OUT_PACKETS			7
+#define EP_MAXPKT0			0x28
+#define EP_MAXPKT1			0x29
+#define 	ADDITIONAL_TRANSACTION_OPPORTUNITIES	3
+#define 		NONE_ADDITIONAL_TRANSACTION		0
+#define 		ONE_ADDITIONAL_TRANSACTION		1
+#define 		TWO_ADDITIONAL_TRANSACTION		2
+#define EP_CFG				0x2a
+#define 	ENDPOINT_NUMBER				0
+#define 	ENDPOINT_DIRECTION			4
+#define 	ENDPOINT_TYPE				5
+#define 	ENDPOINT_ENABLE				7
+#define EP_HBW				0x2b
+#define 	HIGH_BANDWIDTH_OUT_TRANSACTION_PID	0
+#define 		DATA0_PID				0
+#define 		DATA1_PID				1
+#define 		DATA2_PID				2
+#define 		MDATA_PID				3
+#define EP_BUFF_STATES			0x2c
+#define 	BUFFER_A_STATE				0
+#define 	BUFFER_B_STATE				2
+#define 		BUFF_FREE				0
+#define 		BUFF_VALID				1
+#define 		BUFF_LCL				2
+#define 		BUFF_USB				3
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK1	0x9054
+
+/* PCI-RDK EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1		0x00000000
+#define 	RDK_EPLD_USB_RESET				0
+#define 	RDK_EPLD_USB_POWERDOWN				1
+#define 	RDK_EPLD_USB_WAKEUP				2
+#define 	RDK_EPLD_USB_EOT				3
+#define 	RDK_EPLD_DPPULL					4
+#define RDK_EPLD_IO_REGISTER2		0x00000004
+#define 	RDK_EPLD_BUSWIDTH				0
+#define 	RDK_EPLD_USER					2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE			3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE			4
+#define RDK_EPLD_STATUS_REGISTER	0x00000008
+#define 	RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER	0x0000000c
+
+/* PCI-RDK PLX 9054 Registers */
+#define INTCSR				0x68
+#define 	PCI_INTERRUPT_ENABLE				8
+#define 	LOCAL_INTERRUPT_INPUT_ENABLE			11
+#define 	LOCAL_INPUT_INTERRUPT_ACTIVE			15
+#define 	LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE		18
+#define 	LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE		19
+#define 	DMA_CHANNEL_0_INTERRUPT_ACTIVE			21
+#define 	DMA_CHANNEL_1_INTERRUPT_ACTIVE			22
+#define CNTRL				0x6C
+#define 	RELOAD_CONFIGURATION_REGISTERS			29
+#define 	PCI_ADAPTER_SOFTWARE_RESET			30
+#define DMAMODE0			0x80
+#define 	LOCAL_BUS_WIDTH					0
+#define 	INTERNAL_WAIT_STATES				2
+#define 	TA_READY_INPUT_ENABLE				6
+#define 	LOCAL_BURST_ENABLE				8
+#define 	SCATTER_GATHER_MODE				9
+#define 	DONE_INTERRUPT_ENABLE				10
+#define 	LOCAL_ADDRESSING_MODE				11
+#define 	DEMAND_MODE					12
+#define 	DMA_EOT_ENABLE					14
+#define 	FAST_SLOW_TERMINATE_MODE_SELECT			15
+#define 	DMA_CHANNEL_INTERRUPT_SELECT			17
+#define DMAPADR0			0x84
+#define DMALADR0			0x88
+#define DMASIZ0				0x8c
+#define DMADPR0				0x90
+#define 	DESCRIPTOR_LOCATION				0
+#define 	END_OF_CHAIN					1
+#define 	INTERRUPT_AFTER_TERMINAL_COUNT			2
+#define 	DIRECTION_OF_TRANSFER				3
+#define DMACSR0				0xa8
+#define 	CHANNEL_ENABLE					0
+#define 	CHANNEL_START					1
+#define 	CHANNEL_ABORT					2
+#define 	CHANNEL_CLEAR_INTERRUPT				3
+#define 	CHANNEL_DONE					4
+#define DMATHR				0xb0
+#define LBRD1				0xf8
+#define 	MEMORY_SPACE_LOCAL_BUS_WIDTH			0
+#define 	W8_BIT						0
+#define 	W16_BIT						1
+
+/* Special OR'ing of INTCSR bits */
+#define LOCAL_INTERRUPT_TEST \
+	((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
+
+#define DMA_CHANNEL_0_TEST \
+	((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
+
+#define DMA_CHANNEL_1_TEST \
+	((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
+
+/* EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1			0x00000000
+#define 	RDK_EPLD_USB_RESET			0
+#define 	RDK_EPLD_USB_POWERDOWN			1
+#define 	RDK_EPLD_USB_WAKEUP			2
+#define 	RDK_EPLD_USB_EOT			3
+#define 	RDK_EPLD_DPPULL				4
+#define RDK_EPLD_IO_REGISTER2			0x00000004
+#define 	RDK_EPLD_BUSWIDTH			0
+#define 	RDK_EPLD_USER				2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE		3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE		4
+#define RDK_EPLD_STATUS_REGISTER		0x00000008
+#define RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER		0x0000000c
+
+#define EPLD_IO_CONTROL_REGISTER		0x400
+#define 	NET2272_RESET				0
+#define 	BUSWIDTH				1
+#define 	MPX_MODE				3
+#define 	USER					4
+#define 	DMA_TIMEOUT_ENABLE			5
+#define 	DMA_CTL_DACK				6
+#define 	EPLD_DMA_ENABLE				7
+#define EPLD_DMA_CONTROL_REGISTER		0x800
+#define 	SPLIT_DMA_MODE				0
+#define 	SPLIT_DMA_DIRECTION			1
+#define 	SPLIT_DMA_ENABLE			2
+#define 	SPLIT_DMA_INTERRUPT_ENABLE		3
+#define 	SPLIT_DMA_INTERRUPT			4
+#define 	EPLD_DMA_MODE				5
+#define 	EPLD_DMA_CONTROLLER_ENABLE		7
+#define SPLIT_DMA_ADDRESS_LOW			0xc00
+#define SPLIT_DMA_ADDRESS_HIGH			0x1000
+#define SPLIT_DMA_BYTE_COUNT_LOW		0x1400
+#define SPLIT_DMA_BYTE_COUNT_HIGH		0x1800
+#define EPLD_REVISION_REGISTER			0x1c00
+#define SPLIT_DMA_RAM				0x4000
+#define DMA_RAM_SIZE				0x1000
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK2	0x3272
+
+/* PCI-RDK version 2 registers */
+
+/* Main Control Registers */
+
+#define RDK2_IRQENB			0x00
+#define RDK2_IRQSTAT			0x04
+#define 	PB7				23
+#define 	PB6				22
+#define 	PB5				21
+#define 	PB4				20
+#define 	PB3				19
+#define 	PB2				18
+#define 	PB1				17
+#define 	PB0				16
+#define 	GP3				23
+#define 	GP2				23
+#define 	GP1				23
+#define 	GP0				23
+#define 	DMA_RETRY_ABORT			6
+#define 	DMA_PAUSE_DONE			5
+#define 	DMA_ABORT_DONE			4
+#define 	DMA_OUT_FIFO_TRANSFER_DONE	3
+#define 	DMA_LOCAL_DONE			2
+#define 	DMA_PCI_DONE			1
+#define 	NET2272_PCI_IRQ			0
+
+#define RDK2_LOCCTLRDK			0x08
+#define 	CHIP_RESET			3
+#define 	SPLIT_DMA			2
+#define 	MULTIPLEX_MODE			1
+#define 	BUS_WIDTH			0
+
+#define RDK2_GPIOCTL			0x10
+#define 	GP3_OUT_ENABLE					7
+#define 	GP2_OUT_ENABLE					6
+#define 	GP1_OUT_ENABLE					5
+#define 	GP0_OUT_ENABLE					4
+#define 	GP3_DATA					3
+#define 	GP2_DATA					2
+#define 	GP1_DATA					1
+#define 	GP0_DATA					0
+
+#define RDK2_LEDSW			0x14
+#define 	LED3				27
+#define 	LED2				26
+#define 	LED1				25
+#define 	LED0				24
+#define 	PBUTTON				16
+#define 	DIPSW				0
+
+#define RDK2_DIAG			0x18
+#define 	RDK2_FAST_TIMES				2
+#define 	FORCE_PCI_SERR				1
+#define 	FORCE_PCI_INT				0
+#define RDK2_FPGAREV			0x1C
+
+/* Dma Control registers */
+#define RDK2_DMACTL			0x80
+#define 	ADDR_HOLD				24
+#define 	RETRY_COUNT				16	/* 23:16 */
+#define 	FIFO_THRESHOLD				11	/* 15:11 */
+#define 	MEM_WRITE_INVALIDATE			10
+#define 	READ_MULTIPLE				9
+#define 	READ_LINE				8
+#define 	RDK2_DMA_MODE				6	/* 7:6 */
+#define 	CONTROL_DACK				5
+#define 	EOT_ENABLE				4
+#define 	EOT_POLARITY				3
+#define 	DACK_POLARITY				2
+#define 	DREQ_POLARITY				1
+#define 	DMA_ENABLE				0
+
+#define RDK2_DMASTAT			0x84
+#define 	GATHER_COUNT				12	/* 14:12 */
+#define 	FIFO_COUNT				6	/* 11:6 */
+#define 	FIFO_FLUSH				5
+#define 	FIFO_TRANSFER				4
+#define 	PAUSE_DONE				3
+#define 	ABORT_DONE				2
+#define 	DMA_ABORT				1
+#define 	DMA_START				0
+
+#define RDK2_DMAPCICOUNT		0x88
+#define 	DMA_DIRECTION				31
+#define 	DMA_PCI_BYTE_COUNT			0	/* 0:23 */
+
+#define RDK2_DMALOCCOUNT		0x8C	/* 0:23 dma local byte count */
+
+#define RDK2_DMAADDR			0x90	/* 2:31 PCI bus starting address */
+
+/*---------------------------------------------------------------------------*/
+
+#define REG_INDEXED_THRESHOLD	(1 << 5)
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+struct net2272_ep {
+	struct usb_ep ep;
+	struct net2272 *dev;
+	unsigned long irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+	unsigned num:8,
+	         fifo_size:12,
+	         stopped:1,
+	         wedged:1,
+	         is_in:1,
+	         is_iso:1,
+	         dma:1,
+	         not_empty:1;
+};
+
+struct net2272 {
+	/* each device provides one gadget, several endpoints */
+	struct usb_gadget gadget;
+	struct device *dev;
+	unsigned short dev_id;
+
+	spinlock_t lock;
+	struct net2272_ep ep[4];
+	struct usb_gadget_driver *driver;
+	unsigned protocol_stall:1,
+	         softconnect:1,
+	         is_selfpowered:1,
+	         wakeup:1,
+	         dma_eot_polarity:1,
+	         dma_dack_polarity:1,
+	         dma_dreq_polarity:1,
+	         dma_busy:1;
+	u16 chiprev;
+	u8 pagesel;
+
+	unsigned int irq;
+	unsigned short fifo_mode;
+
+	unsigned int base_shift;
+	u16 __iomem *base_addr;
+	union {
+#ifdef CONFIG_PCI
+		struct {
+			void __iomem *plx9054_base_addr;
+			void __iomem *epld_base_addr;
+		} rdk1;
+		struct {
+			/* Bar0, Bar1 is base_addr both mem-mapped */
+			void __iomem *fpga_base_addr;
+		} rdk2;
+#endif
+	};
+};
+
+static void __iomem *
+net2272_reg_addr(struct net2272 *dev, unsigned int reg)
+{
+	return dev->base_addr + (reg << dev->base_shift);
+}
+
+static void
+net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
+{
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		writeb(value, net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		writeb(value, net2272_reg_addr(dev, reg));
+}
+
+static u8
+net2272_read(struct net2272 *dev, unsigned int reg)
+{
+	u8 ret;
+
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		ret = readb(net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		ret = readb(net2272_reg_addr(dev, reg));
+
+	return ret;
+}
+
+static void
+net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	net2272_write(dev, reg, value);
+}
+
+static u8
+net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	return net2272_read(dev, reg);
+}
+
+static void allow_status(struct net2272_ep *ep)
+{
+	/* ep0 only */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
+		(1 << ALT_NAK_OUT_PACKETS) |
+		(1 << NAK_OUT_PACKETS_MODE));
+	ep->stopped = 1;
+}
+
+static void set_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
+	net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
+}
+
+static void clear_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
+{
+	/* net2272_ep_write will truncate to u8 for us */
+	net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
+	net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
+	net2272_ep_write(ep, EP_TRANSFER0, count);
+}
+
+struct net2272_request {
+	struct usb_request req;
+	struct list_head queue;
+	unsigned mapped:1,
+	         valid:1;
+};
+
+#endif