Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

1 files changed, 58 insertions, 22 deletions

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index e20bc109fdd..1172eaeddd8 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,14 +30,13 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of_platform.h>
+#include <linux/phy/phy.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/phy.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <mach/map.h>
-
 #include "s3c-hsotg.h"
 
 static const char * const s3c_hsotg_supply_names[] = {
@@ -140,11 +139,13 @@ struct s3c_hsotg_ep {
  * @dev: The parent device supplied to the probe function
  * @driver: USB gadget driver
  * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
  * @plat: The platform specific configuration data. This can be removed once
  * all SoCs support usb transceiver.
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps: Number of available EPs (excluding EP0)
  * @debug_root: root directrory for debugfs.
@@ -161,7 +162,8 @@ struct s3c_hsotg_ep {
 struct s3c_hsotg {
 	struct device		 *dev;
 	struct usb_gadget_driver *driver;
-	struct usb_phy		*phy;
+	struct phy		 *phy;
+	struct usb_phy		 *uphy;
 	struct s3c_hsotg_plat	 *plat;
 
 	spinlock_t              lock;
@@ -172,6 +174,7 @@ struct s3c_hsotg {
 
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
 
+	u32			phyif;
 	unsigned int		dedicated_fifos:1;
 	unsigned char           num_of_eps;
 
@@ -2086,13 +2089,13 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	case DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
 		ep0_mps = EP0_MPS_LIMIT;
-		ep_mps = 64;
+		ep_mps = 1023;
 		break;
 
 	case DSTS_EnumSpd_HS:
 		hsotg->gadget.speed = USB_SPEED_HIGH;
 		ep0_mps = EP0_MPS_LIMIT;
-		ep_mps = 512;
+		ep_mps = 1024;
 		break;
 
 	case DSTS_EnumSpd_LS:
@@ -2156,6 +2159,9 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		s3c_hsotg_complete_request(hsotg, ep, req,
 					   result);
 	}
+	if(hsotg->dedicated_fifos)
+		if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072)
+			s3c_hsotg_txfifo_flush(hsotg, ep->index);
 }
 
 #define call_gadget(_hs, _entry) \
@@ -2283,7 +2289,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
 	 */
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+	writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
 	       (0x5 << 10), hsotg->regs + GUSBCFG);
 
 	s3c_hsotg_init_fifo(hsotg);
@@ -2908,8 +2914,11 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
 
-	if (hsotg->phy)
-		usb_phy_init(hsotg->phy);
+	if (hsotg->phy) {
+		phy_init(hsotg->phy);
+		phy_power_on(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_init(hsotg->uphy);
 	else if (hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 }
@@ -2925,8 +2934,11 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->phy)
-		usb_phy_shutdown(hsotg->phy);
+	if (hsotg->phy) {
+		phy_power_off(hsotg->phy);
+		phy_exit(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_shutdown(hsotg->uphy);
 	else if (hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 }
@@ -3152,7 +3164,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 
 	hs_ep->parent = hsotg;
 	hs_ep->ep.name = hs_ep->name;
-	hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT;
+	usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
 	/*
@@ -3533,7 +3545,8 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 static int s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
-	struct usb_phy *phy;
+	struct phy *phy;
+	struct usb_phy *uphy;
 	struct device *dev = &pdev->dev;
 	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
@@ -3548,19 +3561,26 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY, finally fall back to pdata
+	 */
+	phy = devm_phy_get(&pdev->dev, "usb2-phy");
 	if (IS_ERR(phy)) {
-		/* Fallback for pdata */
-		plat = dev_get_platdata(&pdev->dev);
-		if (!plat) {
-			dev_err(&pdev->dev, "no platform data or transceiver defined\n");
-			return -EPROBE_DEFER;
-		} else {
+		uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(uphy)) {
+			/* Fallback for pdata */
+			plat = dev_get_platdata(&pdev->dev);
+			if (!plat) {
+				dev_err(&pdev->dev,
+				"no platform data or transceiver defined\n");
+				return -EPROBE_DEFER;
+			}
 			hsotg->plat = plat;
-		}
-	} else {
+		} else
+			hsotg->uphy = uphy;
+	} else
 		hsotg->phy = phy;
-	}
 
 	hsotg->dev = dev;
 
@@ -3627,6 +3647,19 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIf16;
+
+	/*
+	 * If using the generic PHY framework, check if the PHY bus
+	 * width is 8-bit and set the phyif appropriately.
+	 */
+	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
+		hsotg->phyif = GUSBCFG_PHYIf8;
+
+	if (hsotg->phy)
+		phy_init(hsotg->phy);
+
 	/* usb phy enable */
 	s3c_hsotg_phy_enable(hsotg);
 
@@ -3720,6 +3753,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 	}
 
 	s3c_hsotg_phy_disable(hsotg);
+	if (hsotg->phy)
+		phy_exit(hsotg->phy);
 	clk_disable_unprepare(hsotg->clk);
 
 	return 0;
@@ -3733,6 +3768,7 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id s3c_hsotg_of_ids[] = {
 	{ .compatible = "samsung,s3c6400-hsotg", },
+	{ .compatible = "snps,dwc2", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids);