summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2008-08-14 17:04:48 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2008-10-17 14:40:52 -0700
commita7a19fac8a9fbc0182fb1b464848a31529c39433 (patch)
tree07bfe7ff198fddd9fdd235ae8a4ffced6e855f30 /drivers/usb/gadget
parent27140219373327f2291da5d74a78db0105b15060 (diff)
usb: gadget Kconfig cleanup
This reorders the list of USB peripheral controller drivers so it's more common for the initial (default) value to be relevant: put the SOC integrated silicon up front, discrete stuff last. Alphabetize. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig265
1 files changed, 144 insertions, 121 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index acc95b2ac6f..5dda2dc708d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -85,6 +85,13 @@ config USB_GADGET_SELECTED
#
# USB Peripheral Controller Support
#
+# The order here is alphabetical, except that integrated controllers go
+# before discrete ones so they will be the initial/default value:
+# - integrated/SOC controllers first
+# - licensed IP used in both SOC and discrete versions
+# - discrete ones (including all PCI-only controllers)
+# - debug/dummy gadget+hcd is last.
+#
choice
prompt "USB Peripheral Controller"
depends on USB_GADGET
@@ -94,26 +101,27 @@ choice
Many controller drivers are platform-specific; these
often need board-specific hooks.
-config USB_GADGET_AMD5536UDC
- boolean "AMD5536 UDC"
- depends on PCI
- select USB_GADGET_DUALSPEED
+#
+# Integrated controllers
+#
+
+config USB_GADGET_AT91
+ boolean "Atmel AT91 USB Device Port"
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+ select USB_GADGET_SELECTED
help
- The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
- It is a USB Highspeed DMA capable USB device controller. Beside ep0
- it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
- The UDC port supports OTG operation, and may be used as a host port
- if it's not being used to implement peripheral or OTG roles.
+ Many Atmel AT91 processors (such as the AT91RM2000) have a
+ full speed USB Device Port with support for five configurable
+ endpoints (plus endpoint zero).
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "amd5536udc" and force all
+ dynamically linked module called "at91_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_AMD5536UDC
+config USB_AT91
tristate
- depends on USB_GADGET_AMD5536UDC
+ depends on USB_GADGET_AT91
default USB_GADGET
- select USB_GADGET_SELECTED
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
@@ -150,28 +158,50 @@ config USB_FSL_USB2
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_NET2280
- boolean "NetChip 228x"
- depends on PCI
- select USB_GADGET_DUALSPEED
+config USB_GADGET_LH7A40X
+ boolean "LH7A40X"
+ depends on ARCH_LH7A40X
help
- NetChip 2280 / 2282 is a PCI based USB peripheral controller which
- supports both full and high speed USB 2.0 data transfers.
-
- It has six configurable endpoints, as well as endpoint zero
- (for control transfers) and several endpoints with dedicated
- functions.
+ This driver provides USB Device Controller driver for LH7A40x
+
+config USB_LH7A40X
+ tristate
+ depends on USB_GADGET_LH7A40X
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
+config USB_GADGET_OMAP
+ boolean "OMAP USB Device Controller"
+ depends on ARCH_OMAP
+ select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ help
+ Many Texas Instruments OMAP processors have flexible full
+ speed USB device controllers, with support for up to 30
+ endpoints (plus endpoint zero). This driver supports the
+ controller in the OMAP 1611, and should work with controllers
+ in other OMAP processors too, given minor tweaks.
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "net2280" and force all
+ dynamically linked module called "omap_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_NET2280
+config USB_OMAP
tristate
- depends on USB_GADGET_NET2280
+ depends on USB_GADGET_OMAP
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_OTG
+ boolean "OTG Support"
+ depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role choice can be changed
+ later, when two dual-role devices talk to each other.
+
+ Select this only if your OMAP board has a Mini-AB connector.
+
config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
@@ -203,34 +233,6 @@ config USB_PXA25X_SMALL
default y if USB_ETH
default y if USB_G_SERIAL
-config USB_GADGET_M66592
- boolean "Renesas M66592 USB Peripheral Controller"
- select USB_GADGET_DUALSPEED
- help
- M66592 is a discrete USB peripheral controller chip that
- supports both full and high speed USB 2.0 data transfers.
- It has seven configurable endpoints, and endpoint zero.
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "m66592_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_M66592
- tristate
- depends on USB_GADGET_M66592
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-config SUPERH_BUILT_IN_M66592
- boolean "Enable SuperH built-in USB like the M66592"
- depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
- help
- SH7722 has USB like the M66592.
-
- The transfer rate is very slow when use "Ethernet Gadget".
- However, this problem is improved if change a value of
- NET_IP_ALIGN to 4.
-
config USB_GADGET_PXA27X
boolean "PXA 27x"
depends on ARCH_PXA && PXA27x
@@ -251,40 +253,32 @@ config USB_PXA27X
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_GOKU
- boolean "Toshiba TC86C001 'Goku-S'"
- depends on PCI
+config USB_GADGET_S3C2410
+ boolean "S3C2410 USB Device Controller"
+ depends on ARCH_S3C2410
help
- The Toshiba TC86C001 is a PCI device which includes controllers
- for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
-
- The device controller has three configurable (bulk or interrupt)
- endpoints, plus endpoint zero (for control transfers).
+ Samsung's S3C2410 is an ARM-4 processor with an integrated
+ full speed USB 1.1 device controller. It has 4 configurable
+ endpoints, as well as endpoint zero (for control transfers).
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "goku_udc" and to force all
- gadget drivers to also be dynamically linked.
+ This driver has been tested on the S3C2410, S3C2412, and
+ S3C2440 processors.
-config USB_GOKU
+config USB_S3C2410
tristate
- depends on USB_GADGET_GOKU
+ depends on USB_GADGET_S3C2410
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_S3C2410_DEBUG
+ boolean "S3C2410 udc debug messages"
+ depends on USB_GADGET_S3C2410
-config USB_GADGET_LH7A40X
- boolean "LH7A40X"
- depends on ARCH_LH7A40X
- help
- This driver provides USB Device Controller driver for LH7A40x
-
-config USB_LH7A40X
- tristate
- depends on USB_GADGET_LH7A40X
- default USB_GADGET
- select USB_GADGET_SELECTED
+#
+# Controllers available in both integrated and discrete versions
+#
-# built in ../musb along with host support
+# musb builds in ../musb along with host support
config USB_GADGET_MUSB_HDRC
boolean "Inventra HDRC USB Peripheral (TI, ...)"
depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
@@ -294,76 +288,105 @@ config USB_GADGET_MUSB_HDRC
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
-config USB_GADGET_OMAP
- boolean "OMAP USB Device Controller"
- depends on ARCH_OMAP
- select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+config USB_GADGET_M66592
+ boolean "Renesas M66592 USB Peripheral Controller"
+ select USB_GADGET_DUALSPEED
help
- Many Texas Instruments OMAP processors have flexible full
- speed USB device controllers, with support for up to 30
- endpoints (plus endpoint zero). This driver supports the
- controller in the OMAP 1611, and should work with controllers
- in other OMAP processors too, given minor tweaks.
+ M66592 is a discrete USB peripheral controller chip that
+ supports both full and high speed USB 2.0 data transfers.
+ It has seven configurable endpoints, and endpoint zero.
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "omap_udc" and force all
+ dynamically linked module called "m66592_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_OMAP
+config USB_M66592
tristate
- depends on USB_GADGET_OMAP
+ depends on USB_GADGET_M66592
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_OTG
- boolean "OTG Support"
- depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+config SUPERH_BUILT_IN_M66592
+ boolean "Enable SuperH built-in USB like the M66592"
+ depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
help
- The most notable feature of USB OTG is support for a
- "Dual-Role" device, which can act as either a device
- or a host. The initial role choice can be changed
- later, when two dual-role devices talk to each other.
+ SH7722 has USB like the M66592.
- Select this only if your OMAP board has a Mini-AB connector.
+ The transfer rate is very slow when use "Ethernet Gadget".
+ However, this problem is improved if change a value of
+ NET_IP_ALIGN to 4.
-config USB_GADGET_S3C2410
- boolean "S3C2410 USB Device Controller"
- depends on ARCH_S3C2410
+#
+# Controllers available only in discrete form (and all PCI controllers)
+#
+
+config USB_GADGET_AMD5536UDC
+ boolean "AMD5536 UDC"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
help
- Samsung's S3C2410 is an ARM-4 processor with an integrated
- full speed USB 1.1 device controller. It has 4 configurable
- endpoints, as well as endpoint zero (for control transfers).
+ The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
+ It is a USB Highspeed DMA capable USB device controller. Beside ep0
+ it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
+ The UDC port supports OTG operation, and may be used as a host port
+ if it's not being used to implement peripheral or OTG roles.
- This driver has been tested on the S3C2410, S3C2412, and
- S3C2440 processors.
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "amd5536udc" and force all
+ gadget drivers to also be dynamically linked.
-config USB_S3C2410
+config USB_AMD5536UDC
tristate
- depends on USB_GADGET_S3C2410
+ depends on USB_GADGET_AMD5536UDC
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_S3C2410_DEBUG
- boolean "S3C2410 udc debug messages"
- depends on USB_GADGET_S3C2410
+config USB_GADGET_NET2280
+ boolean "NetChip 228x"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
+ help
+ NetChip 2280 / 2282 is a PCI based USB peripheral controller which
+ supports both full and high speed USB 2.0 data transfers.
-config USB_GADGET_AT91
- boolean "AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+ It has six configurable endpoints, as well as endpoint zero
+ (for control transfers) and several endpoints with dedicated
+ functions.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "net2280" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_NET2280
+ tristate
+ depends on USB_GADGET_NET2280
+ default USB_GADGET
select USB_GADGET_SELECTED
+
+config USB_GADGET_GOKU
+ boolean "Toshiba TC86C001 'Goku-S'"
+ depends on PCI
help
- Many Atmel AT91 processors (such as the AT91RM2000) have a
- full speed USB Device Port with support for five configurable
- endpoints (plus endpoint zero).
+ The Toshiba TC86C001 is a PCI device which includes controllers
+ for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+ The device controller has three configurable (bulk or interrupt)
+ endpoints, plus endpoint zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "at91_udc" and force all
+ dynamically linked module called "goku_udc" and to force all
gadget drivers to also be dynamically linked.
-config USB_AT91
+config USB_GOKU
tristate
- depends on USB_GADGET_AT91
+ depends on USB_GADGET_GOKU
default USB_GADGET
+ select USB_GADGET_SELECTED
+
+
+#
+# LAST -- dummy/emulated controller
+#
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"