Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

27 files changed, 3340 insertions, 742 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 271ca161d7e..51ab5fd5d46 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -321,6 +321,15 @@ config USB_MV_UDC
 	  USB2.0 OTG controller, which can be configured as high speed or
 	  full speed USB peripheral.
 
+config USB_MV_U3D
+	tristate "MARVELL PXA2128 USB 3.0 controller"
+	depends on CPU_MMP3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
+	  controller, which support super speed USB peripheral.
+
 #
 # Controllers available in both integrated and discrete versions
 #
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 1811513f1c2..3fd8cd09d2c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
+obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
 #
 # USB gadget drivers
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index fdb7aec3bd0..75b8a691fd0 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -235,6 +235,7 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 static struct usb_composite_driver acm_ms_driver = {
 	.name		= "g_acm_ms",
 	.dev		= &device_desc,
+	.max_speed	= USB_SPEED_SUPER,
 	.strings	= dev_strings,
 	.unbind		= __exit_p(acm_ms_unbind),
 };
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1a4430f315c..c9e66dfb02e 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1634,6 +1634,7 @@ static int at91_start(struct usb_gadget *gadget,
 	udc = container_of(gadget, struct at91_udc, gadget);
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
 	dev_set_drvdata(&udc->gadget.dev, &driver->driver);
 	udc->enabled = 1;
 	udc->selfpowered = 1;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 390749bbb0c..3f72110da1b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -117,6 +117,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 			struct usb_function *f,
 			struct usb_ep *_ep)
 {
+	struct usb_composite_dev	*cdev = get_gadget_data(g);
 	struct usb_endpoint_descriptor *chosen_desc = NULL;
 	struct usb_descriptor_header **speed_desc = NULL;
 
@@ -180,10 +181,12 @@ ep_found:
 			_ep->mult = comp_desc->bmAttributes & 0x3;
 		case USB_ENDPOINT_XFER_BULK:
 		case USB_ENDPOINT_XFER_INT:
-			_ep->maxburst = comp_desc->bMaxBurst;
+			_ep->maxburst = comp_desc->bMaxBurst + 1;
 			break;
 		default:
-			/* Do nothing for control endpoints */
+			if (comp_desc->bMaxBurst != 0)
+				ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+			_ep->maxburst = 1;
 			break;
 		}
 	}
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index dcd1c7fbb01..8adc79d1b40 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -21,6 +21,7 @@
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
 #include <linux/export.h>
+#include <linux/hid.h>
 #include <asm/unaligned.h>
 
 #include <linux/usb/composite.h>
@@ -1671,6 +1672,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	}
 		break;
 
+	case HID_DT_HID:
+		pr_vdebug("hid descriptor\n");
+		if (length != sizeof(struct hid_descriptor))
+			goto inv_length;
+		break;
+
 	case USB_DT_OTG:
 		if (length != sizeof(struct usb_otg_descriptor))
 			goto inv_length;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 3b3932c5536..16a8b1c15c6 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -26,6 +26,12 @@ static struct class *hidg_class;
 /*-------------------------------------------------------------------------*/
 /*                            HID gadget struct                            */
 
+struct f_hidg_req_list {
+	struct usb_request	*req;
+	unsigned int		pos;
+	struct list_head 	list;
+};
+
 struct f_hidg {
 	/* configuration */
 	unsigned char			bInterfaceSubClass;
@@ -35,10 +41,10 @@ struct f_hidg {
 	unsigned short			report_length;
 
 	/* recv report */
-	char				*set_report_buff;
-	unsigned short			set_report_length;
+	struct list_head		completed_out_req;
 	spinlock_t			spinlock;
 	wait_queue_head_t		read_queue;
+	unsigned int			qlen;
 
 	/* send report */
 	struct mutex			lock;
@@ -49,7 +55,9 @@ struct f_hidg {
 	int				minor;
 	struct cdev			cdev;
 	struct usb_function		func;
+
 	struct usb_ep			*in_ep;
+	struct usb_ep			*out_ep;
 };
 
 static inline struct f_hidg *func_to_hidg(struct usb_function *f)
@@ -65,7 +73,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {
 	.bDescriptorType	= USB_DT_INTERFACE,
 	/* .bInterfaceNumber	= DYNAMIC */
 	.bAlternateSetting	= 0,
-	.bNumEndpoints		= 1,
+	.bNumEndpoints		= 2,
 	.bInterfaceClass	= USB_CLASS_HID,
 	/* .bInterfaceSubClass	= DYNAMIC */
 	/* .bInterfaceProtocol	= DYNAMIC */
@@ -96,10 +104,23 @@ static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
 				      */
 };
 
+static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
 static struct usb_descriptor_header *hidg_hs_descriptors[] = {
 	(struct usb_descriptor_header *)&hidg_interface_desc,
 	(struct usb_descriptor_header *)&hidg_desc,
 	(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_hs_out_ep_desc,
 	NULL,
 };
 
@@ -117,10 +138,23 @@ static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
 				       */
 };
 
+static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 10, /* FIXME: Add this field in the
+				       * HID gadget configuration?
+				       * (struct hidg_func_descriptor)
+				       */
+};
+
 static struct usb_descriptor_header *hidg_fs_descriptors[] = {
 	(struct usb_descriptor_header *)&hidg_interface_desc,
 	(struct usb_descriptor_header *)&hidg_desc,
 	(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+	(struct usb_descriptor_header *)&hidg_fs_out_ep_desc,
 	NULL,
 };
 
@@ -130,9 +164,11 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = {
 static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 			size_t count, loff_t *ptr)
 {
-	struct f_hidg	*hidg     = file->private_data;
-	char		*tmp_buff = NULL;
-	unsigned long	flags;
+	struct f_hidg *hidg = file->private_data;
+	struct f_hidg_req_list *list;
+	struct usb_request *req;
+	unsigned long flags;
+	int ret;
 
 	if (!count)
 		return 0;
@@ -142,8 +178,9 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 
 	spin_lock_irqsave(&hidg->spinlock, flags);
 
-#define READ_COND (hidg->set_report_buff != NULL)
+#define READ_COND (!list_empty(&hidg->completed_out_req))
 
+	/* wait for at least one buffer to complete */
 	while (!READ_COND) {
 		spin_unlock_irqrestore(&hidg->spinlock, flags);
 		if (file->f_flags & O_NONBLOCK)
@@ -155,19 +192,34 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer,
 		spin_lock_irqsave(&hidg->spinlock, flags);
 	}
 
-
-	count = min_t(unsigned, count, hidg->set_report_length);
-	tmp_buff = hidg->set_report_buff;
-	hidg->set_report_buff = NULL;
-
+	/* pick the first one */
+	list = list_first_entry(&hidg->completed_out_req,
+				struct f_hidg_req_list, list);
+	req = list->req;
+	count = min_t(unsigned int, count, req->actual - list->pos);
 	spin_unlock_irqrestore(&hidg->spinlock, flags);
 
-	if (tmp_buff != NULL) {
-		/* copy to user outside spinlock */
-		count -= copy_to_user(buffer, tmp_buff, count);
-		kfree(tmp_buff);
-	} else
-		count = -ENOMEM;
+	/* copy to user outside spinlock */
+	count -= copy_to_user(buffer, req->buf + list->pos, count);
+	list->pos += count;
+
+	/*
+	 * if this request is completely handled and transfered to
+	 * userspace, remove its entry from the list and requeue it
+	 * again. Otherwise, we will revisit it again upon the next
+	 * call, taking into account its current read position.
+	 */
+	if (list->pos == req->actual) {
+		spin_lock_irqsave(&hidg->spinlock, flags);
+		list_del(&list->list);
+		kfree(list);
+		spin_unlock_irqrestore(&hidg->spinlock, flags);
+
+		req->length = hidg->report_length;
+		ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL);
+		if (ret < 0)
+			return ret;
+	}
 
 	return count;
 }
@@ -282,28 +334,37 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
 /*-------------------------------------------------------------------------*/
 /*                                usb_function                             */
 
-static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+static struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length)
 {
-	struct f_hidg *hidg = (struct f_hidg *)req->context;
-
-	if (req->status != 0 || req->buf == NULL || req->actual == 0) {
-		ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__);
-		return;
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (req) {
+		req->length = length;
+		req->buf = kmalloc(length, GFP_ATOMIC);
+		if (!req->buf) {
+			usb_ep_free_request(ep, req);
+			req = NULL;
+		}
 	}
+	return req;
+}
 
-	spin_lock(&hidg->spinlock);
-
-	hidg->set_report_buff = krealloc(hidg->set_report_buff,
-					 req->actual, GFP_ATOMIC);
+static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *) req->context;
+	struct f_hidg_req_list *req_list;
+	unsigned long flags;
 
-	if (hidg->set_report_buff == NULL) {
-		spin_unlock(&hidg->spinlock);
+	req_list = kzalloc(sizeof(*req_list), GFP_ATOMIC);
+	if (!req_list)
 		return;
-	}
-	hidg->set_report_length = req->actual;
-	memcpy(hidg->set_report_buff, req->buf, req->actual);
 
-	spin_unlock(&hidg->spinlock);
+	req_list->req = req;
+
+	spin_lock_irqsave(&hidg->spinlock, flags);
+	list_add_tail(&req_list->list, &hidg->completed_out_req);
+	spin_unlock_irqrestore(&hidg->spinlock, flags);
 
 	wake_up(&hidg->read_queue);
 }
@@ -344,9 +405,7 @@ static int hidg_setup(struct usb_function *f,
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
 		  | HID_REQ_SET_REPORT):
 		VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
-		req->context  = hidg;
-		req->complete = hidg_set_report_complete;
-		goto respond;
+		goto stall;
 		break;
 
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
@@ -403,16 +462,25 @@ respond:
 static void hidg_disable(struct usb_function *f)
 {
 	struct f_hidg *hidg = func_to_hidg(f);
+	struct f_hidg_req_list *list, *next;
 
 	usb_ep_disable(hidg->in_ep);
 	hidg->in_ep->driver_data = NULL;
+
+	usb_ep_disable(hidg->out_ep);
+	hidg->out_ep->driver_data = NULL;
+
+	list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) {
+		list_del(&list->list);
+		kfree(list);
+	}
 }
 
 static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct usb_composite_dev		*cdev = f->config->cdev;
 	struct f_hidg				*hidg = func_to_hidg(f);
-	int status = 0;
+	int i, status = 0;
 
 	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
 
@@ -429,11 +497,55 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		}
 		status = usb_ep_enable(hidg->in_ep);
 		if (status < 0) {
-			ERROR(cdev, "Enable endpoint FAILED!\n");
+			ERROR(cdev, "Enable IN endpoint FAILED!\n");
 			goto fail;
 		}
 		hidg->in_ep->driver_data = hidg;
 	}
+
+
+	if (hidg->out_ep != NULL) {
+		/* restart endpoint */
+		if (hidg->out_ep->driver_data != NULL)
+			usb_ep_disable(hidg->out_ep);
+
+		status = config_ep_by_speed(f->config->cdev->gadget, f,
+					    hidg->out_ep);
+		if (status) {
+			ERROR(cdev, "config_ep_by_speed FAILED!\n");
+			goto fail;
+		}
+		status = usb_ep_enable(hidg->out_ep);
+		if (status < 0) {
+			ERROR(cdev, "Enable IN endpoint FAILED!\n");
+			goto fail;
+		}
+		hidg->out_ep->driver_data = hidg;
+
+		/*
+		 * allocate a bunch of read buffers and queue them all at once.
+		 */
+		for (i = 0; i < hidg->qlen && status == 0; i++) {
+			struct usb_request *req =
+					hidg_alloc_ep_req(hidg->out_ep,
+							  hidg->report_length);
+			if (req) {
+				req->complete = hidg_set_report_complete;
+				req->context  = hidg;
+				status = usb_ep_queue(hidg->out_ep, req,
+						      GFP_ATOMIC);
+				if (status)
+					ERROR(cdev, "%s queue req --> %d\n",
+						hidg->out_ep->name, status);
+			} else {
+				usb_ep_disable(hidg->out_ep);
+				hidg->out_ep->driver_data = NULL;
+				status = -ENOMEM;
+				goto fail;
+			}
+		}
+	}
+
 fail:
 	return status;
 }
@@ -470,13 +582,18 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	ep->driver_data = c->cdev;	/* claim */
 	hidg->in_ep = ep;
 
+	ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_out_ep_desc);
+	if (!ep)
+		goto fail;
+	ep->driver_data = c->cdev;	/* claim */
+	hidg->out_ep = ep;
+
 	/* preallocate request and buffer */
 	status = -ENOMEM;
 	hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL);
 	if (!hidg->req)
 		goto fail;
 
-
 	hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL);
 	if (!hidg->req->buf)
 		goto fail;
@@ -486,12 +603,12 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
 	hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
 	hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
 	hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT;
 	hidg_desc.desc[0].wDescriptorLength =
 		cpu_to_le16(hidg->report_desc_length);
 
-	hidg->set_report_buff = NULL;
-
 	/* copy descriptors */
 	f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
 	if (!f->descriptors)
@@ -500,6 +617,8 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hidg_hs_in_ep_desc.bEndpointAddress =
 			hidg_fs_in_ep_desc.bEndpointAddress;
+		hidg_hs_out_ep_desc.bEndpointAddress =
+			hidg_fs_out_ep_desc.bEndpointAddress;
 		f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
 		if (!f->hs_descriptors)
 			goto fail;
@@ -509,6 +628,7 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	spin_lock_init(&hidg->spinlock);
 	init_waitqueue_head(&hidg->write_queue);
 	init_waitqueue_head(&hidg->read_queue);
+	INIT_LIST_HEAD(&hidg->completed_out_req);
 
 	/* create char device */
 	cdev_init(&hidg->cdev, &f_hidg_fops);
@@ -553,7 +673,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
 	usb_free_descriptors(f->descriptors);
 
 	kfree(hidg->report_desc);
-	kfree(hidg->set_report_buff);
 	kfree(hidg);
 }
 
@@ -624,6 +743,9 @@ int __init hidg_bind_config(struct usb_configuration *c,
 	hidg->func.disable = hidg_disable;
 	hidg->func.setup   = hidg_setup;
 
+	/* this could me made configurable at some point */
+	hidg->qlen	   = 4;
+
 	status = usb_add_function(c, &hidg->func);
 	if (status)
 		kfree(hidg);
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index f67b453740b..4f1142efa6d 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -44,12 +44,12 @@
  * function for a USB device, it also illustrates a technique of
  * double-buffering for increased throughput.
  *
- * Function supports multiple logical units (LUNs).  Backing storage
- * for each LUN is provided by a regular file or a block device.
- * Access for each LUN can be limited to read-only.  Moreover, the
- * function can indicate that LUN is removable and/or CD-ROM.  (The
- * later implies read-only access.)
- *
+ * For more information about MSF and in particular its module
+ * parameters and sysfs interface read the
+ * <Documentation/usb/mass-storage.txt> file.
+ */
+
+/*
  * MSF is configured by specifying a fsg_config structure.  It has the
  * following fields:
  *
@@ -75,25 +75,6 @@
  *	->nofua		Flag specifying that FUA flag in SCSI WRITE(10,12)
  *				commands for this LUN shall be ignored.
  *
- *	lun_name_format	A printf-like format for names of the LUN
- *				devices.  This determines how the
- *				directory in sysfs will be named.
- *				Unless you are using several MSFs in
- *				a single gadget (as opposed to single
- *				MSF in many configurations) you may
- *				leave it as NULL (in which case
- *				"lun%d" will be used).  In the format
- *				you can use "%d" to index LUNs for
- *				MSF's with more than one LUN.  (Beware
- *				that there is only one integer given
- *				as an argument for the format and
- *				specifying invalid format may cause
- *				unspecified behaviour.)
- *	thread_name	Name of the kernel thread process used by the
- *				MSF.  You can safely set it to NULL
- *				(in which case default "file-storage"
- *				will be used).
- *
  *	vendor_name
  *	product_name
  *	release		Information used as a reply to INQUIRY
@@ -114,62 +95,6 @@
  * data track and no audio tracks; hence there need be only one
  * backing file per LUN.
  *
- *
- * MSF includes support for module parameters.  If gadget using it
- * decides to use it, the following module parameters will be
- * available:
- *
- *	file=filename[,filename...]
- *			Names of the files or block devices used for
- *				backing storage.
- *	ro=b[,b...]	Default false, boolean for read-only access.
- *	removable=b[,b...]
- *			Default true, boolean for removable media.
- *	cdrom=b[,b...]	Default false, boolean for whether to emulate
- *				a CD-ROM drive.
- *	nofua=b[,b...]	Default false, booleans for ignore FUA flag
- *				in SCSI WRITE(10,12) commands
- *	luns=N		Default N = number of filenames, number of
- *				LUNs to support.
- *	stall		Default determined according to the type of
- *				USB device controller (usually true),
- *				boolean to permit the driver to halt
- *				bulk endpoints.
- *
- * The module parameters may be prefixed with some string.  You need
- * to consult gadget's documentation or source to verify whether it is
- * using those module parameters and if it does what are the prefixes
- * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
- * the prefix).
- *
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed.  The memory requirement amounts to two 16K buffers, size
- * configurable by a parameter.  Support is included for both
- * full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints.  With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- *
- * The pathnames of the backing files and the ro settings are
- * available in the attribute files "file" and "ro" in the lun<n> (or
- * to be more precise in a directory which name comes from
- * "lun_name_format" option!) subdirectory of the gadget's sysfs
- * directory.  If the "removable" option is set, writing to these
- * files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab.  Changes to the
- * ro setting are not allowed when the medium is loaded or if CD-ROM
- * emulation is being used.
- *
- * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
- * if the LUN is removable, the backing file is released to simulate
- * ejection.
- *
- *
  * This function is heavily based on "File-backed Storage Gadget" by
  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
  * Brownell.  The driver's SCSI command interface was based on the
@@ -211,7 +136,7 @@
  * In normal operation the main thread is started during the gadget's
  * fsg_bind() callback and stopped during fsg_unbind().  But it can
  * also exit when it receives a signal, and there's no point leaving
- * the gadget running when the thread is dead.  At of this moment, MSF
+ * the gadget running when the thread is dead.  As of this moment, MSF
  * provides no way to deregister the gadget when thread dies -- maybe
  * a callback functions is needed.
  *
@@ -417,9 +342,6 @@ struct fsg_config {
 		char nofua;
 	} luns[FSG_MAX_LUNS];
 
-	const char		*lun_name_format;
-	const char		*thread_name;
-
 	/* Callback functions. */
 	const struct fsg_operations	*ops;
 	/* Gadget's private data. */
@@ -2687,11 +2609,15 @@ static int fsg_main_thread(void *common_)
 
 /*************************** DEVICE ATTRIBUTES ***************************/
 
-/* Write permission is checked per LUN in store_*() functions. */
 static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro);
 static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua);
 static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file);
 
+static struct device_attribute dev_attr_ro_cdrom =
+	__ATTR(ro, 0444, fsg_show_ro, NULL);
+static struct device_attribute dev_attr_file_nonremovable =
+	__ATTR(file, 0444, fsg_show_file, NULL);
+
 
 /****************************** FSG COMMON ******************************/
 
@@ -2792,11 +2718,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		curlun->dev.parent = &gadget->dev;
 		/* curlun->dev.driver = &fsg_driver.driver; XXX */
 		dev_set_drvdata(&curlun->dev, &common->filesem);
-		dev_set_name(&curlun->dev,
-			     cfg->lun_name_format
-			   ? cfg->lun_name_format
-			   : "lun%d",
-			     i);
+		dev_set_name(&curlun->dev, "lun%d", i);
 
 		rc = device_register(&curlun->dev);
 		if (rc) {
@@ -2806,10 +2728,16 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 			goto error_release;
 		}
 
-		rc = device_create_file(&curlun->dev, &dev_attr_ro);
+		rc = device_create_file(&curlun->dev,
+					curlun->cdrom
+				      ? &dev_attr_ro_cdrom
+				      : &dev_attr_ro);
 		if (rc)
 			goto error_luns;
-		rc = device_create_file(&curlun->dev, &dev_attr_file);
+		rc = device_create_file(&curlun->dev,
+					curlun->removable
+				      ? &dev_attr_file
+				      : &dev_attr_file_nonremovable);
 		if (rc)
 			goto error_luns;
 		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
@@ -2878,8 +2806,7 @@ buffhds_first_it:
 
 	/* Tell the thread to start working */
 	common->thread_task =
-		kthread_create(fsg_main_thread, common,
-			       cfg->thread_name ?: "file-storage");
+		kthread_create(fsg_main_thread, common, "file-storage");
 	if (IS_ERR(common->thread_task)) {
 		rc = PTR_ERR(common->thread_task);
 		goto error_release;
@@ -2945,8 +2872,14 @@ static void fsg_common_release(struct kref *ref)
 		/* In error recovery common->nluns may be zero. */
 		for (; i; --i, ++lun) {
 			device_remove_file(&lun->dev, &dev_attr_nofua);
-			device_remove_file(&lun->dev, &dev_attr_ro);
-			device_remove_file(&lun->dev, &dev_attr_file);
+			device_remove_file(&lun->dev,
+					   lun->cdrom
+					 ? &dev_attr_ro_cdrom
+					 : &dev_attr_ro);
+			device_remove_file(&lun->dev,
+					   lun->removable
+					 ? &dev_attr_file
+					 : &dev_attr_file_nonremovable);
 			fsg_lun_close(lun);
 			device_unregister(&lun->dev);
 		}
@@ -3167,8 +3100,7 @@ fsg_config_from_params(struct fsg_config *cfg,
 	for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
 		lun->ro = !!params->ro[i];
 		lun->cdrom = !!params->cdrom[i];
-		lun->removable = /* Removable by default */
-			params->removable_count <= i || params->removable[i];
+		lun->removable = !!params->removable[i];
 		lun->filename =
 			params->file_count > i && params->file[i][0]
 			? params->file[i]
@@ -3176,8 +3108,6 @@ fsg_config_from_params(struct fsg_config *cfg,
 	}
 
 	/* Let MSF use defaults */
-	cfg->lun_name_format = 0;
-	cfg->thread_name = 0;
 	cfg->vendor_name = 0;
 	cfg->product_name = 0;
 	cfg->release = 0xffff;
@@ -3203,4 +3133,3 @@ fsg_common_from_params(struct fsg_common *common,
 	fsg_config_from_params(&cfg, params);
 	return fsg_common_init(common, cdev, &cfg);
 }
-
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 2022fe49214..2a8bf0655c6 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -29,6 +29,25 @@
 
 unsigned int uvc_gadget_trace_param;
 
+/*-------------------------------------------------------------------------*/
+
+/* module parameters specific to the Video streaming endpoint */
+static unsigned streaming_interval = 1;
+module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_interval, "1 - 16");
+
+static unsigned streaming_maxpacket = 1024;
+module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+static unsigned streaming_mult;
+module_param(streaming_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)");
+
+static unsigned streaming_maxburst;
+module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
+
 /* --------------------------------------------------------------------------
  * Function descriptors
  */
@@ -59,6 +78,8 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
 #define UVC_INTF_VIDEO_CONTROL			0
 #define UVC_INTF_VIDEO_STREAMING		1
 
+#define STATUS_BYTECOUNT			16	/* 16 bytes status */
+
 static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
 	.bLength		= sizeof(uvc_iad),
 	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
@@ -82,12 +103,12 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
 	.bmAttributes		= USB_ENDPOINT_XFER_INT,
-	.wMaxPacketSize		= cpu_to_le16(16),
+	.wMaxPacketSize		= cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval		= 8,
 };
 
@@ -95,7 +116,7 @@ static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
 	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_CS_ENDPOINT,
 	.bDescriptorSubType	= UVC_EP_INTERRUPT,
-	.wMaxTransferSize	= cpu_to_le16(16),
+	.wMaxTransferSize	= cpu_to_le16(STATUS_BYTECOUNT),
 };
 
 static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
@@ -122,7 +143,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_streaming_ep = {
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -131,15 +152,72 @@ static struct usb_endpoint_descriptor uvc_streaming_ep = {
 	.bInterval		= 1,
 };
 
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize		= cpu_to_le16(1024),
+	.bInterval		= 1,
+};
+
+/* super speed support */
+static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		8,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
+	.bLength =		sizeof uvc_ss_control_comp,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
+	.bLength =		sizeof uvc_ss_streaming_comp,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	.bMaxBurst =		0,
+	.bmAttributes =	0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
 static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
 	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
-	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_fs_streaming_ep,
 	NULL,
 };
 
 static const struct usb_descriptor_header * const uvc_hs_streaming[] = {
 	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
-	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_hs_streaming_ep,
+	NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_ss_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_ep,
+	(struct usb_descriptor_header *) &uvc_ss_streaming_comp,
 	NULL,
 };
 
@@ -215,6 +293,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 	struct uvc_device *uvc = to_uvc(f);
 	struct v4l2_event v4l2_event;
 	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+	int ret;
 
 	INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
 
@@ -262,7 +341,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 			return 0;
 
 		if (uvc->video.ep) {
-			uvc->video.ep->desc = &uvc_streaming_ep;
+			ret = config_ep_by_speed(f->config->cdev->gadget,
+					&(uvc->func), uvc->video.ep);
+			if (ret)
+				return ret;
 			usb_ep_enable(uvc->video.ep);
 		}
 
@@ -368,9 +450,11 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 {
 	struct uvc_input_header_descriptor *uvc_streaming_header;
 	struct uvc_header_descriptor *uvc_control_header;
+	const struct uvc_descriptor_header * const *uvc_control_desc;
 	const struct uvc_descriptor_header * const *uvc_streaming_cls;
 	const struct usb_descriptor_header * const *uvc_streaming_std;
 	const struct usb_descriptor_header * const *src;
+	static struct usb_endpoint_descriptor *uvc_control_ep;
 	struct usb_descriptor_header **dst;
 	struct usb_descriptor_header **hdr;
 	unsigned int control_size;
@@ -379,10 +463,29 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	unsigned int bytes;
 	void *mem;
 
-	uvc_streaming_cls = (speed == USB_SPEED_FULL)
-			  ? uvc->desc.fs_streaming : uvc->desc.hs_streaming;
-	uvc_streaming_std = (speed == USB_SPEED_FULL)
-			  ? uvc_fs_streaming : uvc_hs_streaming;
+	switch (speed) {
+	case USB_SPEED_SUPER:
+		uvc_control_desc = uvc->desc.ss_control;
+		uvc_streaming_cls = uvc->desc.ss_streaming;
+		uvc_streaming_std = uvc_ss_streaming;
+		uvc_control_ep = &uvc_ss_control_ep;
+		break;
+
+	case USB_SPEED_HIGH:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.hs_streaming;
+		uvc_streaming_std = uvc_hs_streaming;
+		uvc_control_ep = &uvc_fs_control_ep;
+		break;
+
+	case USB_SPEED_FULL:
+	default:
+		uvc_control_desc = uvc->desc.fs_control;
+		uvc_streaming_cls = uvc->desc.fs_streaming;
+		uvc_streaming_std = uvc_fs_streaming;
+		uvc_control_ep = &uvc_fs_control_ep;
+		break;
+	}
 
 	/* Descriptors layout
 	 *
@@ -400,16 +503,24 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	control_size = 0;
 	streaming_size = 0;
 	bytes = uvc_iad.bLength + uvc_control_intf.bLength
-	      + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+	      + uvc_control_ep->bLength + uvc_control_cs_ep.bLength
 	      + uvc_streaming_intf_alt0.bLength;
-	n_desc = 5;
 
-	for (src = (const struct usb_descriptor_header**)uvc->desc.control; *src; ++src) {
+	if (speed == USB_SPEED_SUPER) {
+		bytes += uvc_ss_control_comp.bLength;
+		n_desc = 6;
+	} else {
+		n_desc = 5;
+	}
+
+	for (src = (const struct usb_descriptor_header **)uvc_control_desc;
+			*src; ++src) {
 		control_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
 	}
-	for (src = (const struct usb_descriptor_header**)uvc_streaming_cls; *src; ++src) {
+	for (src = (const struct usb_descriptor_header **)uvc_streaming_cls;
+			*src; ++src) {
 		streaming_size += (*src)->bLength;
 		bytes += (*src)->bLength;
 		n_desc++;
@@ -433,12 +544,15 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 
 	uvc_control_header = mem;
 	UVC_COPY_DESCRIPTORS(mem, dst,
-		(const struct usb_descriptor_header**)uvc->desc.control);
+		(const struct usb_descriptor_header **)uvc_control_desc);
 	uvc_control_header->wTotalLength = cpu_to_le16(control_size);
 	uvc_control_header->bInCollection = 1;
 	uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
 
-	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep);
+	if (speed == USB_SPEED_SUPER)
+		UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
+
 	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep);
 	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0);
 
@@ -446,7 +560,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	UVC_COPY_DESCRIPTORS(mem, dst,
 		(const struct usb_descriptor_header**)uvc_streaming_cls);
 	uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
-	uvc_streaming_header->bEndpointAddress = uvc_streaming_ep.bEndpointAddress;
+	uvc_streaming_header->bEndpointAddress =
+		uvc_fs_streaming_ep.bEndpointAddress;
 
 	UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
 
@@ -482,6 +597,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	kfree(f->descriptors);
 	kfree(f->hs_descriptors);
+	kfree(f->ss_descriptors);
 
 	kfree(uvc);
 }
@@ -496,8 +612,26 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 
 	INFO(cdev, "uvc_function_bind\n");
 
+	/* sanity check the streaming endpoint module parameters */
+	if (streaming_interval < 1)
+		streaming_interval = 1;
+	if (streaming_interval > 16)
+		streaming_interval = 16;
+	if (streaming_mult > 2)
+		streaming_mult = 2;
+	if (streaming_maxburst > 15)
+		streaming_maxburst = 15;
+
+	/*
+	 * fill in the FS video streaming specific descriptors from the
+	 * module parameters
+	 */
+	uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ?
+						1023 : streaming_maxpacket;
+	uvc_fs_streaming_ep.bInterval = streaming_interval;
+
 	/* Allocate endpoints. */
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep);
 	if (!ep) {
 		INFO(cdev, "Unable to allocate control EP\n");
 		goto error;
@@ -505,7 +639,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc->control_ep = ep;
 	ep->driver_data = uvc;
 
-	ep = usb_ep_autoconfig(cdev->gadget, &uvc_streaming_ep);
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep);
 	if (!ep) {
 		INFO(cdev, "Unable to allocate streaming EP\n");
 		goto error;
@@ -526,9 +660,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc_streaming_intf_alt1.bInterfaceNumber = ret;
 	uvc->streaming_intf = ret;
 
-	/* Copy descriptors. */
+	/* sanity check the streaming endpoint module parameters */
+	if (streaming_maxpacket > 1024)
+		streaming_maxpacket = 1024;
+
+	/* Copy descriptors for FS. */
 	f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
-	f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+
+	/* support high speed hardware */
+	if (gadget_is_dualspeed(cdev->gadget)) {
+		/*
+		 * Fill in the HS descriptors from the module parameters for the
+		 * Video Streaming endpoint.
+		 * NOTE: We assume that the user knows what they are doing and
+		 * won't give parameters that their UDC doesn't support.
+		 */
+		uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+		uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11;
+		uvc_hs_streaming_ep.bInterval = streaming_interval;
+		uvc_hs_streaming_ep.bEndpointAddress =
+				uvc_fs_streaming_ep.bEndpointAddress;
+
+		/* Copy descriptors. */
+		f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+	}
+
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		/*
+		 * Fill in the SS descriptors from the module parameters for the
+		 * Video Streaming endpoint.
+		 * NOTE: We assume that the user knows what they are doing and
+		 * won't give parameters that their UDC doesn't support.
+		 */
+		uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket;
+		uvc_ss_streaming_ep.bInterval = streaming_interval;
+		uvc_ss_streaming_comp.bmAttributes = streaming_mult;
+		uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+		uvc_ss_streaming_comp.wBytesPerInterval =
+			streaming_maxpacket * (streaming_mult + 1) *
+			(streaming_maxburst + 1);
+		uvc_ss_streaming_ep.bEndpointAddress =
+				uvc_fs_streaming_ep.bEndpointAddress;
+
+		/* Copy descriptors. */
+		f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER);
+	}
 
 	/* Preallocate control endpoint request. */
 	uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
@@ -583,9 +760,11 @@ error:
  */
 int __init
 uvc_bind_config(struct usb_configuration *c,
-		const struct uvc_descriptor_header * const *control,
+		const struct uvc_descriptor_header * const *fs_control,
+		const struct uvc_descriptor_header * const *ss_control,
 		const struct uvc_descriptor_header * const *fs_streaming,
-		const struct uvc_descriptor_header * const *hs_streaming)
+		const struct uvc_descriptor_header * const *hs_streaming,
+		const struct uvc_descriptor_header * const *ss_streaming)
 {
 	struct uvc_device *uvc;
 	int ret = 0;
@@ -603,38 +782,54 @@ uvc_bind_config(struct usb_configuration *c,
 	uvc->state = UVC_STATE_DISCONNECTED;
 
 	/* Validate the descriptors. */
-	if (control == NULL || control[0] == NULL ||
-	    control[0]->bDescriptorSubType != UVC_VC_HEADER)
+	if (fs_control == NULL || fs_control[0] == NULL ||
+		fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
-	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
-	    fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+	if (ss_control == NULL || ss_control[0] == NULL ||
+		ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
 		goto error;
 
-	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
-	    hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
+	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
+		fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
 
-	uvc->desc.control = control;
-	uvc->desc.fs_streaming = fs_streaming;
-	uvc->desc.hs_streaming = hs_streaming;
-
-	/* Allocate string descriptor numbers. */
-	if ((ret = usb_string_id(c->cdev)) < 0)
+	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
+		hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
-	uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
-	uvc_iad.iFunction = ret;
 
-	if ((ret = usb_string_id(c->cdev)) < 0)
+	if (ss_streaming == NULL || ss_streaming[0] == NULL ||
+		ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
 		goto error;
-	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
-	uvc_control_intf.iInterface = ret;
 
-	if ((ret = usb_string_id(c->cdev)) < 0)
-		goto error;
-	uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
-	uvc_streaming_intf_alt0.iInterface = ret;
-	uvc_streaming_intf_alt1.iInterface = ret;
+	uvc->desc.fs_control = fs_control;
+	uvc->desc.ss_control = ss_control;
+	uvc->desc.fs_streaming = fs_streaming;
+	uvc->desc.hs_streaming = hs_streaming;
+	uvc->desc.ss_streaming = ss_streaming;
+
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) {
+		/* Allocate string descriptor numbers. */
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
+		uvc_iad.iFunction = ret;
+
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
+		uvc_control_intf.iInterface = ret;
+
+		ret = usb_string_id(c->cdev);
+		if (ret < 0)
+			goto error;
+		uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+		uvc_streaming_intf_alt0.iInterface = ret;
+		uvc_streaming_intf_alt1.iInterface = ret;
+	}
 
 	/* Register the function. */
 	uvc->func.name = "uvc";
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index abf83293513..c3d258d3018 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -17,9 +17,11 @@
 #include <linux/usb/video.h>
 
 extern int uvc_bind_config(struct usb_configuration *c,
-			   const struct uvc_descriptor_header * const *control,
-			   const struct uvc_descriptor_header * const *fs_streaming,
-			   const struct uvc_descriptor_header * const *hs_streaming);
+		   const struct uvc_descriptor_header * const *fs_control,
+		   const struct uvc_descriptor_header * const *hs_control,
+		   const struct uvc_descriptor_header * const *fs_streaming,
+		   const struct uvc_descriptor_header * const *hs_streaming,
+		   const struct uvc_descriptor_header * const *ss_streaming);
 
 #endif /* _F_UVC_H_ */
 
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index dcbc0a2e48d..1b0f086426b 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -21,7 +21,8 @@
 #include <mach/hardware.h>
 
 static struct clk *mxc_ahb_clk;
-static struct clk *mxc_usb_clk;
+static struct clk *mxc_per_clk;
+static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
 #define USBPHYCTRL_OTGBASE_OFFSET	0x608
@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35() && !cpu_is_mx25()) {
-		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-		if (IS_ERR(mxc_ahb_clk))
-			return PTR_ERR(mxc_ahb_clk);
+	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(mxc_ipg_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
+		return PTR_ERR(mxc_ipg_clk);
+	}
 
-		ret = clk_enable(mxc_ahb_clk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-			goto eenahb;
-		}
+	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(mxc_ahb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
+		return PTR_ERR(mxc_ahb_clk);
 	}
 
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	mxc_usb_clk = clk_get(&pdev->dev, "usb");
-	if (IS_ERR(mxc_usb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
-		ret = PTR_ERR(mxc_usb_clk);
-		goto egusb;
+	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(mxc_per_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
+		return PTR_ERR(mxc_per_clk);
 	}
 
+	clk_prepare_enable(mxc_ipg_clk);
+	clk_prepare_enable(mxc_ahb_clk);
+	clk_prepare_enable(mxc_per_clk);
+
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
 	if (!cpu_is_mx51()) {
-		freq = clk_get_rate(mxc_usb_clk);
+		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
 			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_enable(mxc_usb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
-		goto eenusb;
-	}
-
 	return 0;
 
-eenusb:
 eclkrate:
-	clk_put(mxc_usb_clk);
-	mxc_usb_clk = NULL;
-egusb:
-	if (!cpu_is_mx35())
-		clk_disable(mxc_ahb_clk);
-eenahb:
-	if (!cpu_is_mx35())
-		clk_put(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_per_clk);
+	mxc_per_clk = NULL;
 	return ret;
 }
 
@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-		mxc_usb_clk = NULL;
+		clk_disable_unprepare(mxc_per_clk);
+		mxc_per_clk = NULL;
 	}
 }
 
 void fsl_udc_clk_release(void)
 {
-	if (mxc_usb_clk) {
-		clk_disable(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-	}
-	if (!cpu_is_mx35()) {
-		clk_disable(mxc_ahb_clk);
-		clk_put(mxc_ahb_clk);
-	}
+	if (mxc_per_clk)
+		clk_disable_unprepare(mxc_per_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
 }
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index bc6f9bb9994..3def828f85e 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -24,6 +24,7 @@
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -1229,7 +1230,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	struct fsl_udc *udc;
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -ENOTSUPP;
 }
@@ -1983,13 +1984,13 @@ static int fsl_start(struct usb_gadget_driver *driver,
 		goto out;
 	}
 
-	if (udc_controller->transceiver) {
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
 		/* Suspend the controller until OTG enable it */
 		udc_controller->stopped = 1;
 		printk(KERN_INFO "Suspend udc for OTG auto detect\n");
 
 		/* connect to bus through transceiver */
-		if (udc_controller->transceiver) {
+		if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
 			retval = otg_set_peripheral(
 					udc_controller->transceiver->otg,
 						    &udc_controller->gadget);
@@ -2030,7 +2031,7 @@ static int fsl_stop(struct usb_gadget_driver *driver)
 	if (!driver || driver != udc_controller->driver || !driver->unbind)
 		return -EINVAL;
 
-	if (udc_controller->transceiver)
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
 		otg_set_peripheral(udc_controller->transceiver->otg, NULL);
 
 	/* stop DR, disable intr */
@@ -2455,8 +2456,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
-		udc_controller->transceiver = usb_get_transceiver();
-		if (!udc_controller->transceiver) {
+		udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
 			ERR("Can't find OTG driver!\n");
 			ret = -ENODEV;
 			goto err_kfree;
@@ -2540,7 +2541,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		goto err_free_irq;
 	}
 
-	if (!udc_controller->transceiver) {
+	if (IS_ERR_OR_NULL(udc_controller->transceiver)) {
 		/* initialize usb hw reg except for regs for EP,
 		 * leave usbintr reg untouched */
 		dr_controller_setup(udc_controller);
@@ -2560,11 +2561,12 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	dev_set_name(&udc_controller->gadget.dev, "gadget");
 	udc_controller->gadget.dev.release = fsl_udc_release;
 	udc_controller->gadget.dev.parent = &pdev->dev;
+	udc_controller->gadget.dev.of_node = pdev->dev.of_node;
 	ret = device_register(&udc_controller->gadget.dev);
 	if (ret < 0)
 		goto err_free_irq;
 
-	if (udc_controller->transceiver)
+	if (!IS_ERR_OR_NULL(udc_controller->transceiver))
 		udc_controller->gadget.is_otg = 1;
 
 	/* setup QH and epctrl for ep0 */
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 54034f84f99..dc5334856af 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1432,7 +1432,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "can't get USB clock\n");
 		goto fail2;
 	}
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	if (clk_get_rate(clk) != 48000000) {
 		D_INI(&pdev->dev,
@@ -1496,7 +1496,7 @@ fail4:
 		free_irq(imx_usb->usbd_int[i], imx_usb);
 fail3:
 	clk_put(clk);
-	clk_disable(clk);
+	clk_disable_unprepare(clk);
 fail2:
 	iounmap(base);
 fail1:
@@ -1521,7 +1521,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
 
 	clk_put(imx_usb->clk);
-	clk_disable(imx_usb->clk);
+	clk_disable_unprepare(imx_usb->clk);
 	iounmap(imx_usb->base);
 
 	release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 2ab0388d93e..f1ec99e69cb 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -165,6 +165,7 @@ struct lpc32xx_udc {
 	int			udp_irq[4];
 	struct clk		*usb_pll_clk;
 	struct clk		*usb_slv_clk;
+	struct clk		*usb_otg_clk;
 
 	/* DMA support */
 	u32			*udca_v_base;
@@ -227,33 +228,15 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
 #define UDCA_BUFF_SIZE (128)
 
 /* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
- * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL()
+ * be replaced with an inremap()ed pointer
  * */
 #define USB_CTRL		IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
-#define USB_CLOCK_MASK		(AHB_M_CLOCK_ON | OTG_CLOCK_ON | \
-				 DEV_CLOCK_ON | I2C_CLOCK_ON)
 
 /* USB_CTRL bit defines */
 #define USB_SLAVE_HCLK_EN	(1 << 24)
 #define USB_HOST_NEED_CLK_EN	(1 << 21)
 #define USB_DEV_NEED_CLK_EN	(1 << 22)
 
-#define USB_OTG_CLK_CTRL(udc)	((udc)->udp_baseaddr + 0xFF4)
-#define USB_OTG_CLK_STAT(udc)	((udc)->udp_baseaddr + 0xFF8)
-
-/* USB_OTG_CLK_CTRL bit defines */
-#define AHB_M_CLOCK_ON		(1 << 4)
-#define OTG_CLOCK_ON		(1 << 3)
-#define I2C_CLOCK_ON		(1 << 2)
-#define DEV_CLOCK_ON		(1 << 1)
-#define HOST_CLOCK_ON		(1 << 0)
-
-#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110)
-
-/* USB_OTG_STAT_CONTROL bit defines */
-#define TRANSPARENT_I2C_EN	(1 << 7)
-#define HOST_EN			(1 << 0)
-
 /**********************************************************************
  * USB device controller register offsets
  **********************************************************************/
@@ -677,7 +660,7 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
 		ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
 
 	/* Enable usb_need_clk clock after transceiver is initialized */
-	writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+	writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL);
 
 	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n",
 		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
@@ -1010,11 +993,8 @@ static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
 /* Enables or disables most of the USB system clocks when low power mode is
  * needed. Clocks are typically started on a connection event, and disabled
  * when a cable is disconnected */
-#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON)
 static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 {
-	int to = 1000;
-
 	if (enable != 0) {
 		if (udc->clocked)
 			return;
@@ -1028,14 +1008,7 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 		writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
 			     USB_CTRL);
 
-		/* Set to enable all needed USB OTG clocks */
-		writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
-		while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
-			USB_CLOCK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n");
+		clk_enable(udc->usb_otg_clk);
 	} else {
 		if (!udc->clocked)
 			return;
@@ -1047,19 +1020,11 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
 		/* 48MHz PLL dpwn */
 		clk_disable(udc->usb_pll_clk);
 
-		/* Enable the USB device clock */
+		/* Disable the USB device clock */
 		writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
 			     USB_CTRL);
 
-		/* Set to enable all needed USB OTG clocks */
-		writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc));
-
-		while (((readl(USB_OTG_CLK_STAT(udc)) &
-			 OTGOFF_CLK_MASK) !=
-			OTGOFF_CLK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n");
+		clk_disable(udc->usb_otg_clk);
 	}
 }
 
@@ -3041,6 +3006,7 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
 	udc->enabled = 1;
 	udc->selfpowered = 1;
 	udc->vbus = 0;
@@ -3239,6 +3205,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		retval = PTR_ERR(udc->usb_slv_clk);
 		goto usb_clk_get_fail;
 	}
+	udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
+	if (IS_ERR(udc->usb_otg_clk)) {
+		dev_err(udc->dev, "failed to acquire USB otg clock\n");
+		retval = PTR_ERR(udc->usb_slv_clk);
+		goto usb_otg_clk_get_fail;
+	}
 
 	/* Setup PLL clock to 48MHz */
 	retval = clk_enable(udc->usb_pll_clk);
@@ -3262,15 +3234,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		goto usb_clk_enable_fail;
 	}
 
-	/* Set to enable all needed USB OTG clocks */
-	writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
-
-	i = 1000;
-	while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
-		USB_CLOCK_MASK) && (i > 0))
-		i--;
-	if (!i)
-		dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n");
+	/* Enable USB OTG clock */
+	retval = clk_enable(udc->usb_otg_clk);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to start USB otg clock\n");
+		goto usb_otg_clk_enable_fail;
+	}
 
 	/* Setup deferred workqueue data */
 	udc->poweron = udc->pullup = 0;
@@ -3390,12 +3359,16 @@ dma_alloc_fail:
 	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
 			  udc->udca_v_base, udc->udca_p_base);
 i2c_fail:
+	clk_disable(udc->usb_otg_clk);
+usb_otg_clk_enable_fail:
 	clk_disable(udc->usb_slv_clk);
 usb_clk_enable_fail:
 pll_set_fail:
 	clk_disable(udc->usb_pll_clk);
 pll_enable_fail:
 	clk_put(udc->usb_slv_clk);
+usb_otg_clk_get_fail:
+	clk_put(udc->usb_otg_clk);
 usb_clk_get_fail:
 	clk_put(udc->usb_pll_clk);
 pll_get_fail:
@@ -3433,6 +3406,8 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 
 	device_unregister(&udc->gadget.dev);
 
+	clk_disable(udc->usb_otg_clk);
+	clk_put(udc->usb_otg_clk);
 	clk_disable(udc->usb_slv_clk);
 	clk_put(udc->usb_slv_clk);
 	clk_disable(udc->usb_pll_clk);
@@ -3446,7 +3421,6 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	int to = 1000;
 	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
 
 	if (udc->clocked) {
@@ -3461,15 +3435,6 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 		   on resume */
 		udc->clocked = 1;
 
-		/* Kill OTG and I2C clocks */
-		writel(0, USB_OTG_CLK_CTRL(udc));
-		while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) !=
-			OTGOFF_CLK_MASK) && (to > 0))
-			to--;
-		if (!to)
-			dev_dbg(udc->dev,
-				"USB OTG clocks not correctly enabled\n");
-
 		/* Kill global USB clock */
 		clk_disable(udc->usb_slv_clk);
 	}
diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h
new file mode 100644
index 00000000000..e32a787ac37
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
+#define MV_U3D_TRB_ALIGNMENT	16
+#define MV_U3D_DMA_BOUNDARY	4096
+#define MV_U3D_EP0_MAX_PKT_SIZE	512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP		0
+#define MV_U3D_DATA_STATE_XMIT		1
+#define MV_U3D_DATA_STATE_NEED_ZLP	2
+#define MV_U3D_WAIT_FOR_OUT_STATUS	3
+#define MV_U3D_DATA_STATE_RECV		4
+#define MV_U3D_STATUS_STAGE		5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP		0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
+#define MV_U3D_USBINT_UNDER_RUN	0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_USBINT_VBUS_VALID	0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_USBINT_LINK_CHG		0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
+#define MV_U3D_LINK_CHANGE_INACT		0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
+#define MV_U3D_LINK_CHANGE_U1			0x00000100
+#define MV_U3D_LINK_CHANGE_U2			0x00000200
+#define MV_U3D_LINK_CHANGE_U3			0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP		0x00000001
+#define MV_U3D_CMD_CTRL_RESET		0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
+#define MV_U3D_EPXCR_EP_TYPE_BULK		2
+#define MV_U3D_EPXCR_EP_TYPE_INT		3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
+#define MV_U3D_USB_BULK_BURST_OUT		6
+#define MV_U3D_USB_BULK_BURST_IN		14
+
+#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
+#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
+#define MV_U3D_EPXCR_EP_INIT		(1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
+#define MV_U3D_COMPLETE_INVALID	0
+#define MV_U3D_COMPLETE_SUCCESS	1
+#define MV_U3D_COMPLETE_BUFF_ERR	2
+#define MV_U3D_COMPLETE_SHORT_PACKET	3
+#define MV_U3D_COMPLETE_TRB_ERR	5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
+#define MV_U3D_USB3_PHY_OFFSET		0xB800
+
+#define DCS_ENABLE	0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT		10000
+#define MV_U3D_FLUSH_TIMEOUT		100000
+#define MV_U3D_OWN_TIMEOUT		10000
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN		1
+#define MV_U3D_EP_DIR_OUT		0
+#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+	u32	rsvd[5];
+	u32	dboff;	/* doorbell register offset */
+	u32	rtsoff;	/* runtime register offset */
+	u32	vuoff;	/* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	rsvd1[11];
+	u32	dcbaapl;	/* Device Context Base Address low register */
+	u32	dcbaaph;	/* Device Context Base Address high register */
+	u32	rsvd2[243];
+	u32	portsc;		/* port status and control register*/
+	u32	portlinkinfo;	/* port link info register*/
+	u32	rsvd3[9917];
+	u32	doorbell;	/* doorbell register */
+};
+
+/* control enpoint enable registers */
+struct epxcr {
+	u32	epxoutcr0;	/* ep out control 0 register */
+	u32	epxoutcr1;	/* ep out control 1 register */
+	u32	epxincr0;	/* ep in control 0 register */
+	u32	epxincr1;	/* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+	u32	curdeqlo;	/* current TRB pointer low */
+	u32	curdeqhi;	/* current TRB pointer high */
+	u32	statuslo;	/* transfer status low */
+	u32	statushi;	/* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+	u32	ctrlepenable;	/* control endpoint enable register */
+	u32	setuplock;	/* setup lock register */
+	u32	endcomplete;	/* endpoint transfer complete register */
+	u32	intrcause;	/* interrupt cause register */
+	u32	intrenable;	/* interrupt enable register */
+	u32	trbcomplete;	/* TRB complete register */
+	u32	linkchange;	/* link change register */
+	u32	rsvd1[5];
+	u32	trbunderrun;	/* TRB underrun register */
+	u32	rsvd2[43];
+	u32	bridgesetting;	/* bridge setting register */
+	u32	rsvd3[7];
+	struct xferstatus	txst[16];	/* TX status register */
+	struct xferstatus	rxst[16];	/* RX status register */
+	u32	ltssm;		/* LTSSM control register */
+	u32	pipe;		/* PIPE control register */
+	u32	linkcr0;	/* link control 0 register */
+	u32	linkcr1;	/* link control 1 register */
+	u32	rsvd6[60];
+	u32	mib0;		/* MIB0 counter register */
+	u32	usblink;	/* usb link control register */
+	u32	ltssmstate;	/* LTSSM state register */
+	u32	linkerrorcause;	/* link error cause register */
+	u32	rsvd7[60];
+	u32	devaddrtiebrkr;	/* device address and tie breaker */
+	u32	itpinfo0;	/* ITP info 0 register */
+	u32	itpinfo1;	/* ITP info 1 register */
+	u32	rsvd8[61];
+	struct epxcr	epcr[16];	/* ep control register */
+	u32	rsvd9[64];
+	u32	phyaddr;	/* PHY address register */
+	u32	phydata;	/* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+	u32	rsvd0;
+	u32	rsvd1;
+	u32	trb_addr_lo;		/* TRB address low 32 bit */
+	u32	trb_addr_hi;		/* TRB address high 32 bit */
+	u32	rsvd2;
+	u32	rsvd3;
+	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+	u32	own:1;		/* owner of TRB */
+	u32	rsvd1:3;
+	u32	chain:1;	/* associate this TRB with the
+				next TRB on the Ring */
+	u32	ioc:1;		/* interrupt on complete */
+	u32	rsvd2:4;
+	u32	type:6;		/* TRB type */
+#define TYPE_NORMAL	1
+#define TYPE_DATA	3
+#define TYPE_LINK	6
+	u32	dir:1;		/* Working at data stage of control endpoint
+				operation. 0 is OUT and 1 is IN. */
+	u32	rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+	u32	buf_addr_lo;	/* data buffer address low 32 bit */
+	u32	buf_addr_hi;	/* data buffer address high 32 bit */
+	u32	trb_len;	/* transfer length */
+	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
+	dma_addr_t trb_dma;		/* dma address for this trb_hw */
+	struct list_head trb_list;	/* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;	/* device lock */
+	struct completion		*done;
+	struct device			*dev;
+	int				irq;
+
+	/* usb controller registers */
+	struct mv_u3d_cap_regs __iomem	*cap_regs;
+	struct mv_u3d_op_regs __iomem	*op_regs;
+	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
+	void __iomem			*phy_regs;
+
+	unsigned int			max_eps;
+	struct mv_u3d_ep_context	*ep_context;
+	size_t				ep_context_size;
+	dma_addr_t			ep_context_dma;
+
+	struct dma_pool			*trb_pool; /* for TRB data structure */
+	struct mv_u3d_ep		*eps;
+
+	struct mv_u3d_req		*status_req; /* ep0 status request */
+	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;	/* device address */
+
+	unsigned int		errors;
+
+	unsigned		softconnect:1;
+	unsigned		vbus_active:1;	/* vbus is active or not */
+	unsigned		remote_wakeup:1; /* support remote wakeup */
+	unsigned		clock_gating:1;	/* clock gating or not */
+	unsigned		active:1;	/* udc is active or not */
+	unsigned		vbus_valid_detect:1; /* udc vbus detection */
+
+	struct mv_usb_addon_irq *vbus;
+	unsigned int		power;
+
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+	struct usb_ep		ep;
+	struct mv_u3d		*u3d;
+	struct list_head	queue;	/* ep request queued hardware */
+	struct list_head	req_list; /* list of ep request */
+	struct mv_u3d_ep_context	*ep_context; /* ep context */
+	u32			direction;
+	char			name[14];
+	u32			processing; /* there is ep request
+						queued on haredware */
+	spinlock_t		req_lock; /* ep lock */
+	unsigned		wedge:1;
+	unsigned		enabled:1;
+	unsigned		ep_type:2;
+	unsigned		ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+	struct usb_request	req;
+	struct mv_u3d_ep	*ep;
+	struct list_head	queue;	/* ep requst queued on hardware */
+	struct list_head	list;	/* ep request list */
+	struct list_head	trb_list; /* trb list of a request */
+
+	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
+	unsigned		trb_count; /* TRB number in the chain */
+	unsigned		chain;	   /* TRB chain or not */
+};
+
+#endif
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
new file mode 100644
index 00000000000..8cfd5b028db
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -0,0 +1,2098 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mv_usb.h>
+#include <linux/clk.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include "mv_u3d.h"
+
+#define DRIVER_DESC		"Marvell PXA USB3.0 Device Controller driver"
+
+static const char driver_name[] = "mv_u3d";
+static const char driver_desc[] = DRIVER_DESC;
+
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
+static void mv_u3d_stop_activity(struct mv_u3d *u3d,
+			struct usb_gadget_driver *driver);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	MV_U3D_EP0_MAX_PKT_SIZE,
+};
+
+static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep *ep;
+	u32 epxcr;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ep = &u3d->eps[i];
+		ep->u3d = u3d;
+
+		/* ep0 ep context, ep0 in and out share the same ep context */
+		ep->ep_context = &u3d->ep_context[1];
+	}
+
+	/* reset ep state machine */
+	/* reset ep0 out */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
+
+	/* reset ep0 in */
+	epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	epxcr |= MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+	udelay(5);
+	epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
+		<< MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		| (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		| MV_U3D_EPXCR_EP_TYPE_CONTROL);
+	iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
+}
+
+static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
+{
+	u32 tmp;
+	dev_dbg(u3d->dev, "%s\n", __func__);
+
+	/* set TX and RX to stall */
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+
+	tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+	tmp |= MV_U3D_EPXCR_EP_HALT;
+	iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+
+	/* update ep0 state */
+	u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+}
+
+static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
+	struct mv_u3d_req *curr_req)
+{
+	struct mv_u3d_trb	*curr_trb;
+	dma_addr_t cur_deq_lo;
+	struct mv_u3d_ep_context	*curr_ep_context;
+	int trb_complete, actual, remaining_length;
+	int direction, ep_num;
+	int retval = 0;
+	u32 tmp, status, length;
+
+	curr_ep_context = &u3d->ep_context[index];
+	direction = index % 2;
+	ep_num = index / 2;
+
+	trb_complete = 0;
+	actual = curr_req->req.length;
+
+	while (!list_empty(&curr_req->trb_list)) {
+		curr_trb = list_entry(curr_req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		if (!curr_trb->trb_hw->ctrl.own) {
+			dev_err(u3d->dev, "%s, TRB own error!\n",
+				u3d->eps[index].name);
+			return 1;
+		}
+
+		curr_trb->trb_hw->ctrl.own = 0;
+		if (direction == MV_U3D_EP_DIR_OUT) {
+			tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
+			cur_deq_lo =
+				ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
+		} else {
+			tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
+			cur_deq_lo =
+				ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
+		}
+
+		status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
+		length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
+
+		if (status == MV_U3D_COMPLETE_SUCCESS ||
+			(status == MV_U3D_COMPLETE_SHORT_PACKET &&
+			direction == MV_U3D_EP_DIR_OUT)) {
+			remaining_length += length;
+			actual -= remaining_length;
+		} else {
+			dev_err(u3d->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				status);
+			retval = -EPROTO;
+		}
+
+		list_del_init(&curr_trb->trb_list);
+	}
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+	return 0;
+}
+
+/*
+ * mv_u3d_done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static
+void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
+
+	dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
+	/* Removed the req from ep queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free trb for the request */
+	if (!req->chain)
+		dma_pool_free(u3d->trb_pool,
+			req->trb_head->trb_hw, req->trb_head->trb_dma);
+	else {
+		dma_unmap_single(ep->u3d->gadget.dev.parent,
+			(dma_addr_t)req->trb_head->trb_dma,
+			req->trb_count * sizeof(struct mv_u3d_trb_hw),
+			DMA_BIDIRECTIONAL);
+		kfree(req->trb_head->trb_hw);
+	}
+	kfree(req->trb_head);
+
+	usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
+
+	if (status && (status != -ESHUTDOWN)) {
+		dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+	}
+
+	spin_unlock(&ep->u3d->lock);
+	/*
+	 * complete() is from gadget layer,
+	 * eg fsg->bulk_in_complete()
+	 */
+	if (req->req.complete)
+		req->req.complete(&ep->ep, &req->req);
+
+	spin_lock(&ep->u3d->lock);
+}
+
+static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
+{
+	u32 tmp, direction;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	int retval = 0;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 in and out share the same ep context slot 1*/
+	if (ep->ep_num == 0)
+		ep_context = &(u3d->ep_context[1]);
+	else
+		ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
+
+	/* check if the pipe is empty or not */
+	if (!list_empty(&ep->queue)) {
+		dev_err(u3d->dev, "add trb to non-empty queue!\n");
+		retval = -ENOMEM;
+		WARN_ON(1);
+	} else {
+		ep_context->rsvd0 = cpu_to_le32(1);
+		ep_context->rsvd1 = 0;
+
+		/* Configure the trb address and set the DCS bit.
+		 * Both DCS bit and own bit in trb should be set.
+		 */
+		ep_context->trb_addr_lo =
+			cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
+		ep_context->trb_addr_hi = 0;
+
+		/* Ensure that updates to the EP Context will
+		 * occure before Ring Bell.
+		 */
+		wmb();
+
+		/* ring bell the ep */
+		if (ep->ep_num == 0)
+			tmp = 0x1;
+		else
+			tmp = ep->ep_num * 2
+				+ ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
+
+		iowrite32(tmp, &u3d->op_regs->doorbell);
+	}
+	return retval;
+}
+
+static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
+				unsigned *length, dma_addr_t *dma)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = req->req.length - req->req.actual;
+	BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
+	if (!trb) {
+		dev_err(u3d->dev, "%s, trb alloc fail\n", __func__);
+		return NULL;
+	}
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 * cannot use GFP_KERNEL in spin lock
+	 */
+	trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
+	if (!trb_hw) {
+		dev_err(u3d->dev,
+			"%s, dma_pool_alloc fail\n", __func__);
+		return NULL;
+	}
+	trb->trb_dma = *dma;
+	trb->trb_hw = trb_hw;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb_hw->buf_addr_hi = 0;
+	trb_hw->trb_len = cpu_to_le32(*length);
+	trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb_hw->ctrl.dir = 1;
+	else
+		trb_hw->ctrl.dir = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (!req->req.no_interrupt)
+		trb_hw->ctrl.ioc = 1;
+
+	trb_hw->ctrl.chain = 0;
+
+	wmb();
+	return trb;
+}
+
+static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
+		struct mv_u3d_trb *trb, int *is_last)
+{
+	u32 temp;
+	unsigned int direction;
+	struct mv_u3d *u3d;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
+
+	u3d = req->ep->u3d;
+
+	trb->trb_dma = 0;
+
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+
+	trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
+	trb->trb_hw->buf_addr_hi = 0;
+	trb->trb_hw->trb_len = cpu_to_le32(*length);
+	trb->trb_hw->ctrl.own = 1;
+
+	if (req->ep->ep_num == 0)
+		trb->trb_hw->ctrl.type = TYPE_DATA;
+	else
+		trb->trb_hw->ctrl.type = TYPE_NORMAL;
+
+	req->req.actual += *length;
+
+	direction = mv_u3d_ep_dir(req->ep);
+	if (direction == MV_U3D_EP_DIR_IN)
+		trb->trb_hw->ctrl.dir = 1;
+	else
+		trb->trb_hw->ctrl.dir = 0;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Enable interrupt for the last trb of a request */
+	if (*is_last && !req->req.no_interrupt)
+		trb->trb_hw->ctrl.ioc = 1;
+
+	if (*is_last)
+		trb->trb_hw->ctrl.chain = 0;
+	else {
+		trb->trb_hw->ctrl.chain = 1;
+		dev_dbg(u3d->dev, "chain trb\n");
+	}
+
+	wmb();
+
+	return 0;
+}
+
+/* generate TRB linked list for a request
+ * usb controller only supports continous trb chain,
+ * that trb structure physical address should be continous.
+ */
+static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
+{
+	unsigned count;
+	int is_last;
+	struct mv_u3d_trb *trb;
+	struct mv_u3d_trb_hw *trb_hw;
+	struct mv_u3d *u3d;
+	dma_addr_t dma;
+	unsigned length;
+	unsigned trb_num;
+
+	u3d = req->ep->u3d;
+
+	INIT_LIST_HEAD(&req->trb_list);
+
+	length = req->req.length - req->req.actual;
+	/* normally the request transfer length is less than 16KB.
+	 * we use buil_trb_one() to optimize it.
+	 */
+	if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
+		trb = mv_u3d_build_trb_one(req, &count, &dma);
+		list_add_tail(&trb->trb_list, &req->trb_list);
+		req->trb_head = trb;
+		req->trb_count = 1;
+		req->chain = 0;
+	} else {
+		trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
+		if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
+			trb_num++;
+
+		trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
+		if (!trb) {
+			dev_err(u3d->dev,
+					"%s, trb alloc fail\n", __func__);
+			return -ENOMEM;
+		}
+
+		trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
+		if (!trb_hw) {
+			dev_err(u3d->dev,
+					"%s, trb_hw alloc fail\n", __func__);
+			return -ENOMEM;
+		}
+
+		do {
+			trb->trb_hw = trb_hw;
+			if (mv_u3d_build_trb_chain(req, &count,
+						trb, &is_last)) {
+				dev_err(u3d->dev,
+					"%s, mv_u3d_build_trb_chain fail\n",
+					__func__);
+				return -EIO;
+			}
+
+			list_add_tail(&trb->trb_list, &req->trb_list);
+			req->trb_count++;
+			trb++;
+			trb_hw++;
+		} while (!is_last);
+
+		req->trb_head = list_entry(req->trb_list.next,
+					struct mv_u3d_trb, trb_list);
+		req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
+					req->trb_head->trb_hw,
+					trb_num * sizeof(*trb_hw),
+					DMA_BIDIRECTIONAL);
+
+		req->chain = 1;
+	}
+
+	return 0;
+}
+
+static int
+mv_u3d_start_queue(struct mv_u3d_ep *ep)
+{
+	struct mv_u3d *u3d = ep->u3d;
+	struct mv_u3d_req *req;
+	int ret;
+
+	if (!list_empty(&ep->req_list) && !ep->processing)
+		req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
+	else
+		return 0;
+
+	ep->processing = 1;
+
+	/* set up dma mapping */
+	ret = usb_gadget_map_request(&u3d->gadget, &req->req,
+					mv_u3d_ep_dir(ep));
+	if (ret)
+		return ret;
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->trb_count = 0;
+
+	/* build trbs and push them to device queue */
+	if (!mv_u3d_req_to_trb(req)) {
+		ret = mv_u3d_queue_trb(ep, req);
+		if (ret) {
+			ep->processing = 0;
+			return ret;
+		}
+	} else {
+		ep->processing = 0;
+		dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* irq handler advances the queue */
+	if (req)
+		list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+}
+
+static int mv_u3d_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_ep_context *ep_context;
+	u16 max = 0;
+	unsigned maxburst = 0;
+	u32 epxcr, direction;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = mv_u3d_ep_dir(ep);
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	if (!_ep->maxburst)
+		_ep->maxburst = 1;
+	maxburst = _ep->maxburst;
+
+	/* Get the endpoint context address */
+	ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
+
+	/* Set the max burst size */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (maxburst > 16) {
+			dev_dbg(u3d->dev,
+				"max burst should not be greater "
+				"than 16 on bulk ep\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		dev_dbg(u3d->dev,
+			"maxburst: %d on bulk %s\n", maxburst, ep->name);
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfer only supports maxburst as one */
+		maxburst = 1;
+		_ep->maxburst = maxburst;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on int ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (maxburst != 1) {
+			dev_dbg(u3d->dev,
+				"max burst should be 1 on isoc ep "
+				"if transfer size is not 1024\n");
+			maxburst = 1;
+			_ep->maxburst = maxburst;
+		}
+		break;
+	default:
+		goto en_done;
+	}
+
+	ep->ep.maxpacket = max;
+	ep->ep.desc = desc;
+	ep->enabled = 1;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		epxcr |= MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		udelay(5);
+		epxcr &= ~MV_U3D_EPXCR_EP_INIT;
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
+		      | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
+		      | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_u3d_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_ep_context *ep_context;
+	u32 epxcr, direction;
+
+	if (!_ep)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	if (!ep->ep.desc)
+		return -EINVAL;
+
+	u3d = ep->u3d;
+
+	/* Get the endpoint context address */
+	ep_context = ep->ep_context;
+
+	direction = mv_u3d_ep_dir(ep);
+
+	/* nuke all pending requests (does flush) */
+	mv_u3d_nuke(ep, -ESHUTDOWN);
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
+	} else {
+		epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+		epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
+		      | USB_ENDPOINT_XFERTYPE_MASK);
+		iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
+	}
+
+	ep->enabled = 0;
+
+	ep->ep.desc = NULL;
+	return 0;
+}
+
+static struct usb_request *
+mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_u3d_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
+
+	kfree(req);
+}
+
+static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_u3d *u3d;
+	u32 direction;
+	struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
+	unsigned int loops;
+	u32 tmp;
+
+	/* if endpoint is not enabled, cannot flush endpoint */
+	if (!ep->enabled)
+		return;
+
+	u3d = ep->u3d;
+	direction = mv_u3d_ep_dir(ep);
+
+	/* ep0 need clear bit after flushing fifo. */
+	if (!ep->ep_num) {
+		if (direction == MV_U3D_EP_DIR_OUT) {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
+		} else {
+			tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
+			tmp |= MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+			udelay(10);
+			tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
+			iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
+		}
+		return;
+	}
+
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			 * EP_FLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	} else {	/* EP_DIR_IN */
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		tmp |= MV_U3D_EPXCR_EP_FLUSH;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+
+		/* Wait until flushing completed */
+		loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
+		while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
+			MV_U3D_EPXCR_EP_FLUSH) {
+			/*
+			* EP_FLUSH bit should be cleared to indicate this
+			* operation is complete
+			*/
+			if (loops == 0) {
+				dev_dbg(u3d->dev,
+				    "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
+				    direction ? "in" : "out");
+				return;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+	}
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req;
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int is_first_req = 0;
+
+	if (unlikely(!_ep || !_req))
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	req = container_of(_req, struct mv_u3d_req, req);
+
+	if (!ep->ep_num
+		&& u3d->ep0_state == MV_U3D_STATUS_STAGE
+		&& !_req->length) {
+		dev_dbg(u3d->dev, "ep0 status stage\n");
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n",
+			__func__, _ep->name, (u32)req);
+
+	/* catch various bogus parameters */
+	if (!req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(u3d->dev,
+			"%s, bad params, _req: 0x%x,"
+			"req->req.complete: 0x%x, req->req.buf: 0x%x,"
+			"list_empty: 0x%x\n",
+			__func__, (u32)_req,
+			(u32)req->req.complete, (u32)req->req.buf,
+			(u32)list_empty(&req->queue));
+		return -EINVAL;
+	}
+	if (unlikely(!ep->ep.desc)) {
+		dev_err(u3d->dev, "%s, bad ep\n", __func__);
+		return -EINVAL;
+	}
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(u3d->dev,
+			"bad params of driver/speed\n");
+		return -ESHUTDOWN;
+	}
+
+	req->ep = ep;
+
+	/* Software list handles usb request. */
+	spin_lock_irqsave(&ep->req_lock, flags);
+	is_first_req = list_empty(&ep->req_list);
+	list_add_tail(&req->list, &ep->req_list);
+	spin_unlock_irqrestore(&ep->req_lock, flags);
+	if (!is_first_req) {
+		dev_dbg(u3d->dev, "list is not empty\n");
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
+	spin_lock_irqsave(&u3d->lock, flags);
+	mv_u3d_start_queue(ep);
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_u3d_ep *ep;
+	struct mv_u3d_req *req;
+	struct mv_u3d *u3d;
+	struct mv_u3d_ep_context *ep_context;
+	struct mv_u3d_req *next_req;
+
+	unsigned long flags;
+	int ret = 0;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_u3d_ep_fifo_flush(_ep);
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			dev_dbg(u3d->dev,
+				"it is the last request in this ep queue\n");
+			ep_context = ep->ep_context;
+			next_req = list_entry(req->queue.next,
+					struct mv_u3d_req, queue);
+
+			/* Point first TRB of next request to the EP context. */
+			iowrite32((u32) next_req->trb_head,
+					&ep_context->trb_addr_lo);
+		} else {
+			struct mv_u3d_ep_context *ep_context;
+			ep_context = ep->ep_context;
+			ep_context->trb_addr_lo = 0;
+			ep_context->trb_addr_hi = 0;
+		}
+
+	} else
+		WARN_ON(1);
+
+	mv_u3d_done(ep, req, -ECONNRESET);
+
+	/* remove the req from the ep req list */
+	if (!list_empty(&ep->req_list)) {
+		struct mv_u3d_req *curr_req;
+		curr_req = list_entry(ep->req_list.next,
+					struct mv_u3d_req, list);
+		if (curr_req == req) {
+			list_del_init(&req->list);
+			ep->processing = 0;
+		}
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+	return ret;
+}
+
+static void
+mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
+{
+	u32 tmp;
+	struct mv_u3d_ep *ep = u3d->eps;
+
+	dev_dbg(u3d->dev, "%s\n", __func__);
+	if (direction == MV_U3D_EP_DIR_OUT) {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
+	} else {
+		tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+		if (stall)
+			tmp |= MV_U3D_EPXCR_EP_HALT;
+		else
+			tmp &= ~MV_U3D_EPXCR_EP_HALT;
+		iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
+	}
+}
+
+static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_u3d_ep *ep;
+	unsigned long flags = 0;
+	int status = 0;
+	struct mv_u3d *u3d;
+
+	ep = container_of(_ep, struct mv_u3d_ep, ep);
+	u3d = ep->u3d;
+	if (!ep->ep.desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
+			&& !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->u3d->lock, flags);
+	mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->u3d->lock, flags);
+
+	if (ep->ep_num == 0)
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+out:
+	return status;
+}
+
+static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops mv_u3d_ep_ops = {
+	.enable		= mv_u3d_ep_enable,
+	.disable	= mv_u3d_ep_disable,
+
+	.alloc_request	= mv_u3d_alloc_request,
+	.free_request	= mv_u3d_free_request,
+
+	.queue		= mv_u3d_ep_queue,
+	.dequeue	= mv_u3d_ep_dequeue,
+
+	.set_wedge	= mv_u3d_ep_set_wedge,
+	.set_halt	= mv_u3d_ep_set_halt,
+	.fifo_flush	= mv_u3d_ep_fifo_flush,
+};
+
+static void mv_u3d_controller_stop(struct mv_u3d *u3d)
+{
+	u32 tmp;
+
+	if (!u3d->clock_gating && u3d->vbus_valid_detect)
+		iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
+				&u3d->vuc_regs->intrenable);
+	else
+		iowrite32(0, &u3d->vuc_regs->intrenable);
+	iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
+	iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
+	iowrite32(~0x0, &u3d->vuc_regs->linkchange);
+	iowrite32(0x1, &u3d->vuc_regs->setuplock);
+
+	/* Reset the RUN bit in the command register to stop USB */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static void mv_u3d_controller_start(struct mv_u3d *u3d)
+{
+	u32 usbintr;
+	u32 temp;
+
+	/* enable link LTSSM state machine */
+	temp = ioread32(&u3d->vuc_regs->ltssm);
+	temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
+	iowrite32(temp, &u3d->vuc_regs->ltssm);
+
+	/* Enable interrupts */
+	usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
+		MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
+		MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
+		(u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
+	iowrite32(usbintr, &u3d->vuc_regs->intrenable);
+
+	/* Enable ctrl ep */
+	iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
+
+	/* Set the Run bit in the command register */
+	iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
+	dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
+		ioread32(&u3d->op_regs->usbcmd));
+}
+
+static int mv_u3d_controller_reset(struct mv_u3d *u3d)
+{
+	unsigned int loops;
+	u32 tmp;
+
+	/* Stop the controller */
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(MV_U3D_RESET_TIMEOUT);
+	while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(u3d->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Configure the Endpoint Context Address */
+	iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
+	iowrite32(0, &u3d->op_regs->dcbaaph);
+
+	return 0;
+}
+
+static int mv_u3d_enable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	int retval;
+
+	if (u3d->active)
+		return 0;
+
+	if (!u3d->clock_gating) {
+		u3d->active = 1;
+		return 0;
+	}
+
+	dev_dbg(u3d->dev, "enable u3d\n");
+	clk_enable(u3d->clk);
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(u3d->dev,
+				"init phy error %d\n", retval);
+			clk_disable(u3d->clk);
+			return retval;
+		}
+	}
+	u3d->active = 1;
+
+	return 0;
+}
+
+static void mv_u3d_disable(struct mv_u3d *u3d)
+{
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	if (u3d->clock_gating && u3d->active) {
+		dev_dbg(u3d->dev, "disable u3d\n");
+		if (pdata->phy_deinit)
+			pdata->phy_deinit(u3d->phy_regs);
+		clk_disable(u3d->clk);
+		u3d->active = 0;
+	}
+}
+
+static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_u3d *u3d;
+	unsigned long flags;
+	int retval = 0;
+
+	u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	u3d->vbus_active = (is_active != 0);
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	/*
+	 * 1. external VBUS detect: we can disable/enable clock on demand.
+	 * 2. UDC VBUS detect: we have to enable clock all the time.
+	 * 3. No VBUS detect: we have to enable clock all the time.
+	 */
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->softconnect) {
+		if (!u3d->active)
+			goto out;
+
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+out:
+	spin_unlock_irqrestore(&u3d->lock, flags);
+	return retval;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+
+	u3d->power = mA;
+
+	return 0;
+}
+
+static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, u3d->softconnect, u3d->vbus_active);
+	u3d->softconnect = (is_on != 0);
+	if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
+		retval = mv_u3d_enable(u3d);
+		if (retval == 0) {
+			/*
+			 * after clock is disabled, we lost all the register
+			 *  context. We have to re-init registers
+			 */
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	} else if (u3d->driver && u3d->vbus_active) {
+		/* stop all the transfer in queue*/
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		mv_u3d_controller_stop(u3d);
+		mv_u3d_disable(u3d);
+	}
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	return retval;
+}
+
+static int mv_u3d_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	unsigned long flags;
+
+	if (u3d->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	if (!u3d->clock_gating) {
+		clk_enable(u3d->clk);
+		if (pdata->phy_init)
+			pdata->phy_init(u3d->phy_regs);
+	}
+
+	/* hook up the driver ... */
+	driver->driver.bus = NULL;
+	u3d->driver = driver;
+	u3d->gadget.dev.driver = &driver->driver;
+
+	u3d->ep0_dir = USB_DIR_OUT;
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->vbus_valid_detect = 1;
+
+	return 0;
+}
+
+static int mv_u3d_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
+	struct mv_usb_platform_data *pdata = u3d->dev->platform_data;
+	unsigned long flags;
+
+	u3d->vbus_valid_detect = 0;
+	spin_lock_irqsave(&u3d->lock, flags);
+
+	/* enable clock to access controller register */
+	clk_enable(u3d->clk);
+	if (pdata->phy_init)
+		pdata->phy_init(u3d->phy_regs);
+
+	mv_u3d_controller_stop(u3d);
+	/* stop all usb activities */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;
+	mv_u3d_stop_activity(u3d, driver);
+	mv_u3d_disable(u3d);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	spin_unlock_irqrestore(&u3d->lock, flags);
+
+	u3d->gadget.dev.driver = NULL;
+	u3d->driver = NULL;
+
+	return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_u3d_ops = {
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_u3d_vbus_session,
+
+	/* constrain controller's VBUS power usage */
+	.vbus_draw	= mv_u3d_vbus_draw,
+
+	.pullup		= mv_u3d_pullup,
+	.udc_start	= mv_u3d_start,
+	.udc_stop	= mv_u3d_stop,
+};
+
+static int mv_u3d_eps_init(struct mv_u3d *u3d)
+{
+	struct mv_u3d_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0, ep0 in/out use eps[1] */
+	ep = &u3d->eps[1];
+	ep->u3d = u3d;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_u3d_ep_ops;
+	ep->wedge = 0;
+	ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE;
+	ep->ep_num = 0;
+	ep->ep.desc = &mv_u3d_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+	INIT_LIST_HEAD(&ep->req_list);
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* add ep0 ep_context */
+	ep->ep_context = &u3d->ep_context[1];
+
+	/* initialize other endpoints */
+	for (i = 2; i < u3d->max_eps * 2; i++) {
+		ep = &u3d->eps[i];
+		if (i & 1) {
+			snprintf(name, sizeof(name), "ep%din", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_IN;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i >> 1);
+			ep->direction = MV_U3D_EP_DIR_OUT;
+		}
+		ep->u3d = u3d;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &mv_u3d_ep_ops;
+		ep->ep.maxpacket = (unsigned short) ~0;
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
+
+		INIT_LIST_HEAD(&ep->req_list);
+		spin_lock_init(&ep->req_lock);
+		ep->ep_context = &u3d->ep_context[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
+{
+	/* endpoint fifo flush */
+	mv_u3d_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_u3d_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
+		mv_u3d_done(ep, req, status);
+	}
+}
+
+/* stop all USB activities */
+static
+void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
+{
+	struct mv_u3d_ep	*ep;
+
+	mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
+		mv_u3d_nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&u3d->lock);
+		driver->disconnect(&u3d->gadget);
+		spin_lock(&u3d->lock);
+	}
+}
+
+static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
+{
+	/* Increment the error count */
+	u3d->errors++;
+	dev_err(u3d->dev, "%s\n", __func__);
+}
+
+static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
+{
+	u32 linkchange;
+
+	linkchange = ioread32(&u3d->vuc_regs->linkchange);
+	iowrite32(linkchange, &u3d->vuc_regs->linkchange);
+
+	dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
+
+	if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
+		dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
+			ioread32(&u3d->vuc_regs->ltssmstate));
+
+		u3d->usb_state = USB_STATE_DEFAULT;
+		u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+		u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
+
+		/* set speed */
+		u3d->gadget.speed = USB_SPEED_SUPER;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
+		dev_dbg(u3d->dev, "link suspend\n");
+		u3d->resume_state = u3d->usb_state;
+		u3d->usb_state = USB_STATE_SUSPENDED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
+		dev_dbg(u3d->dev, "link resume\n");
+		u3d->usb_state = u3d->resume_state;
+		u3d->resume_state = 0;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
+		dev_dbg(u3d->dev, "warm reset\n");
+		u3d->usb_state = USB_STATE_POWERED;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
+		dev_dbg(u3d->dev, "hot reset\n");
+		u3d->usb_state = USB_STATE_DEFAULT;
+	}
+
+	if (linkchange & MV_U3D_LINK_CHANGE_INACT)
+		dev_dbg(u3d->dev, "inactive\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
+		dev_dbg(u3d->dev, "ss.disabled\n");
+
+	if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
+		dev_dbg(u3d->dev, "vbus invalid\n");
+		u3d->usb_state = USB_STATE_ATTACHED;
+		u3d->vbus_valid_detect = 1;
+		/* if external vbus detect is not supported,
+		 * we handle it here.
+		 */
+		if (!u3d->vbus) {
+			spin_unlock(&u3d->lock);
+			mv_u3d_vbus_session(&u3d->gadget, 0);
+			spin_lock(&u3d->lock);
+		}
+	}
+}
+
+static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
+				struct usb_ctrlrequest *setup)
+{
+	u32 tmp;
+
+	if (u3d->usb_state != USB_STATE_DEFAULT) {
+		dev_err(u3d->dev,
+			"%s, cannot setaddr in this state (%d)\n",
+			__func__, u3d->usb_state);
+		goto err;
+	}
+
+	u3d->dev_addr = (u8)setup->wValue;
+
+	dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
+
+	if (u3d->dev_addr > 127) {
+		dev_err(u3d->dev,
+			"%s, u3d address is wrong (out of range)\n", __func__);
+		u3d->dev_addr = 0;
+		goto err;
+	}
+
+	/* update usb state */
+	u3d->usb_state = USB_STATE_ADDRESS;
+
+	/* set the new address */
+	tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
+	tmp &= ~0x7F;
+	tmp |= (u32)u3d->dev_addr;
+	iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
+
+	return;
+err:
+	mv_u3d_ep0_stall(u3d);
+}
+
+static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
+{
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
+			return 1;
+
+	return 0;
+}
+
+static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	bool delegate = false;
+
+	mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
+
+	dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+
+	/* We process some stardard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			mv_u3d_ch9setaddress(u3d, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			delegate = true;
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			delegate = true;
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate == true) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from u3d */
+			u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0) {
+				dev_err(u3d->dev, "setup error!\n");
+				mv_u3d_ep0_stall(u3d);
+			}
+			spin_lock(&u3d->lock);
+		} else {
+			/* no DATA phase, STATUS phase from gadget */
+			u3d->ep0_dir = MV_U3D_EP_DIR_IN;
+			u3d->ep0_state = MV_U3D_STATUS_STAGE;
+			spin_unlock(&u3d->lock);
+			if (u3d->driver->setup(&u3d->gadget,
+				&u3d->local_setup_buff) < 0)
+				mv_u3d_ep0_stall(u3d);
+			spin_lock(&u3d->lock);
+		}
+
+		if (mv_u3d_is_set_configuration(setup)) {
+			dev_dbg(u3d->dev, "u3d configured\n");
+			u3d->usb_state = USB_STATE_CONFIGURED;
+		}
+	}
+}
+
+static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
+{
+	struct mv_u3d_ep_context *epcontext;
+
+	epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
+
+	/* Copy the setup packet to local buffer */
+	memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
+}
+
+static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
+{
+	u32 tmp, i;
+	/* Process all Setup packet received interrupts */
+	tmp = ioread32(&u3d->vuc_regs->setuplock);
+	if (tmp) {
+		for (i = 0; i < u3d->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				mv_u3d_get_setup_data(u3d, i,
+					(u8 *)(&u3d->local_setup_buff));
+				mv_u3d_handle_setup_packet(u3d, i,
+					&u3d->local_setup_buff);
+			}
+		}
+	}
+
+	iowrite32(tmp, &u3d->vuc_regs->setuplock);
+}
+
+static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_u3d_ep	*curr_ep;
+	struct mv_u3d_req *curr_req, *temp_req;
+	int status;
+
+	tmp = ioread32(&u3d->vuc_regs->endcomplete);
+
+	dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
+	if (!tmp)
+		return;
+	iowrite32(tmp, &u3d->vuc_regs->endcomplete);
+
+	for (i = 0; i < u3d->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 0)
+			curr_ep = &u3d->eps[1];
+		else
+			curr_ep = &u3d->eps[i];
+
+		/* remove req out of ep request list after completion */
+		dev_dbg(u3d->dev, "tr comp: check req_list\n");
+		spin_lock(&curr_ep->req_lock);
+		if (!list_empty(&curr_ep->req_list)) {
+			struct mv_u3d_req *req;
+			req = list_entry(curr_ep->req_list.next,
+						struct mv_u3d_req, list);
+			list_del_init(&req->list);
+			curr_ep->processing = 0;
+		}
+		spin_unlock(&curr_ep->req_lock);
+
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = mv_u3d_process_ep_req(u3d, i, curr_req);
+			if (status)
+				break;
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				mv_u3d_done(curr_ep, curr_req, 0);
+				break;
+			} else {
+				mv_u3d_done(curr_ep, curr_req, status);
+			}
+		}
+
+		dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
+		mv_u3d_start_queue(curr_ep);
+	}
+}
+
+static irqreturn_t mv_u3d_irq(int irq, void *dev)
+{
+	struct mv_u3d *u3d = (struct mv_u3d *)dev;
+	u32 status, intr;
+	u32 bridgesetting;
+	u32 trbunderrun;
+
+	spin_lock(&u3d->lock);
+
+	status = ioread32(&u3d->vuc_regs->intrcause);
+	intr = ioread32(&u3d->vuc_regs->intrenable);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&u3d->lock);
+		dev_err(u3d->dev, "irq error!\n");
+		return IRQ_NONE;
+	}
+
+	if (status & MV_U3D_USBINT_VBUS_VALID) {
+		bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
+		if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
+			/* write vbus valid bit of bridge setting to clear */
+			bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
+			iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
+			dev_dbg(u3d->dev, "vbus valid\n");
+
+			u3d->usb_state = USB_STATE_POWERED;
+			u3d->vbus_valid_detect = 0;
+			/* if external vbus detect is not supported,
+			 * we handle it here.
+			 */
+			if (!u3d->vbus) {
+				spin_unlock(&u3d->lock);
+				mv_u3d_vbus_session(&u3d->gadget, 1);
+				spin_lock(&u3d->lock);
+			}
+		} else
+			dev_err(u3d->dev, "vbus bit is not set\n");
+	}
+
+	/* RX data is already in the 16KB FIFO.*/
+	if (status & MV_U3D_USBINT_UNDER_RUN) {
+		trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
+		dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
+		iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
+		/* write one to clear */
+		iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
+			| MV_U3D_USBINT_TXDESC_ERR),
+			&u3d->vuc_regs->intrcause);
+		dev_err(u3d->dev, "desc err 0x%x\n", status);
+		mv_u3d_irq_process_error(u3d);
+	}
+
+	if (status & MV_U3D_USBINT_LINK_CHG)
+		mv_u3d_irq_process_link_change(u3d);
+
+	if (status & MV_U3D_USBINT_TX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_RX_COMPLETE)
+		mv_u3d_irq_process_tr_complete(u3d);
+
+	if (status & MV_U3D_USBINT_SETUP)
+		mv_u3d_irq_process_setup(u3d);
+
+	spin_unlock(&u3d->lock);
+	return IRQ_HANDLED;
+}
+
+static void mv_u3d_gadget_release(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+static __devexit int mv_u3d_remove(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = platform_get_drvdata(dev);
+
+	BUG_ON(u3d == NULL);
+
+	usb_del_gadget_udc(&u3d->gadget);
+
+	/* free memory allocated in probe */
+	if (u3d->trb_pool)
+		dma_pool_destroy(u3d->trb_pool);
+
+	if (u3d->ep_context)
+		dma_free_coherent(&dev->dev, u3d->ep_context_size,
+			u3d->ep_context, u3d->ep_context_dma);
+
+	kfree(u3d->eps);
+
+	if (u3d->irq)
+		free_irq(u3d->irq, &dev->dev);
+
+	if (u3d->cap_regs)
+		iounmap(u3d->cap_regs);
+	u3d->cap_regs = NULL;
+
+	kfree(u3d->status_req);
+
+	clk_put(u3d->clk);
+
+	device_unregister(&u3d->gadget.dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	kfree(u3d);
+
+	return 0;
+}
+
+static int mv_u3d_probe(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = NULL;
+	struct mv_usb_platform_data *pdata = dev->dev.platform_data;
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	if (!dev->dev.platform_data) {
+		dev_err(&dev->dev, "missing platform_data\n");
+		retval = -ENODEV;
+		goto err_pdata;
+	}
+
+	u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
+	if (!u3d) {
+		dev_err(&dev->dev, "failed to allocate memory for u3d\n");
+		retval = -ENOMEM;
+		goto err_alloc_private;
+	}
+
+	spin_lock_init(&u3d->lock);
+
+	platform_set_drvdata(dev, u3d);
+
+	u3d->dev = &dev->dev;
+	u3d->vbus = pdata->vbus;
+
+	u3d->clk = clk_get(&dev->dev, pdata->clkname[0]);
+	if (IS_ERR(u3d->clk)) {
+		retval = PTR_ERR(u3d->clk);
+		goto err_get_clk;
+	}
+
+	r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
+	if (!r) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto err_get_cap_regs;
+	}
+
+	u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
+		ioremap(r->start, resource_size(r));
+	if (!u3d->cap_regs) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		retval = -EBUSY;
+		goto err_map_cap_regs;
+	} else {
+		dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n",
+			(unsigned int)r->start, (unsigned int)u3d->cap_regs);
+	}
+
+	/* we will access controller register, so enable the u3d controller */
+	clk_enable(u3d->clk);
+
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(u3d->phy_regs);
+		if (retval) {
+			dev_err(&dev->dev, "init phy error %d\n", retval);
+			goto err_u3d_enable;
+		}
+	}
+
+	u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs
+		+ MV_U3D_USB3_OP_REGS_OFFSET);
+
+	u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs
+		+ ioread32(&u3d->cap_regs->vuoff));
+
+	u3d->max_eps = 16;
+
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop u3d here.
+	 */
+	mv_u3d_controller_stop(u3d);
+	iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
+
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
+	size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
+		& ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
+	u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
+					&u3d->ep_context_dma, GFP_KERNEL);
+	if (!u3d->ep_context) {
+		dev_err(&dev->dev, "allocate ep context memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_ep_context;
+	}
+	u3d->ep_context_size = size;
+
+	/* create TRB dma_pool resource */
+	u3d->trb_pool = dma_pool_create("u3d_trb",
+			&dev->dev,
+			sizeof(struct mv_u3d_trb_hw),
+			MV_U3D_TRB_ALIGNMENT,
+			MV_U3D_DMA_BOUNDARY);
+
+	if (!u3d->trb_pool) {
+		retval = -ENOMEM;
+		goto err_alloc_trb_pool;
+	}
+
+	size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
+	u3d->eps = kzalloc(size, GFP_KERNEL);
+	if (!u3d->eps) {
+		dev_err(&dev->dev, "allocate ep memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_eps;
+	}
+
+	/* initialize ep0 status request structure */
+	u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
+	if (!u3d->status_req) {
+		dev_err(&dev->dev, "allocate status_req memory failed\n");
+		retval = -ENOMEM;
+		goto err_alloc_status_req;
+	}
+	INIT_LIST_HEAD(&u3d->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	u3d->status_req->req.buf = (char *)u3d->status_req
+					+ sizeof(struct mv_u3d_req);
+	u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
+
+	u3d->resume_state = USB_STATE_NOTATTACHED;
+	u3d->usb_state = USB_STATE_ATTACHED;
+	u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
+	u3d->remote_wakeup = 0;
+
+	r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
+	if (!r) {
+		dev_err(&dev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto err_get_irq;
+	}
+	u3d->irq = r->start;
+	if (request_irq(u3d->irq, mv_u3d_irq,
+		IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) {
+		u3d->irq = 0;
+		dev_err(&dev->dev, "Request irq %d for u3d failed\n",
+			u3d->irq);
+		retval = -ENODEV;
+		goto err_request_irq;
+	}
+
+	/* initialize gadget structure */
+	u3d->gadget.ops = &mv_u3d_ops;	/* usb_gadget_ops */
+	u3d->gadget.ep0 = &u3d->eps[1].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&u3d->gadget.ep_list);	/* ep_list */
+	u3d->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&u3d->gadget.dev, "gadget");
+	u3d->gadget.dev.parent = &dev->dev;
+	u3d->gadget.dev.dma_mask = dev->dev.dma_mask;
+	u3d->gadget.dev.release = mv_u3d_gadget_release;
+	u3d->gadget.name = driver_name;		/* gadget name */
+
+	retval = device_register(&u3d->gadget.dev);
+	if (retval)
+		goto err_register_gadget_device;
+
+	mv_u3d_eps_init(u3d);
+
+	/* external vbus detection */
+	if (u3d->vbus) {
+		u3d->clock_gating = 1;
+		dev_err(&dev->dev, "external vbus detection\n");
+	}
+
+	if (!u3d->clock_gating)
+		u3d->vbus_active = 1;
+
+	/* enable usb3 controller vbus detection */
+	u3d->vbus_valid_detect = 1;
+
+	retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
+	if (retval)
+		goto err_unregister;
+
+	dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
+		u3d->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_unregister:
+	device_unregister(&u3d->gadget.dev);
+err_register_gadget_device:
+	free_irq(u3d->irq, &dev->dev);
+err_request_irq:
+err_get_irq:
+	kfree(u3d->status_req);
+err_alloc_status_req:
+	kfree(u3d->eps);
+err_alloc_eps:
+	dma_pool_destroy(u3d->trb_pool);
+err_alloc_trb_pool:
+	dma_free_coherent(&dev->dev, u3d->ep_context_size,
+		u3d->ep_context, u3d->ep_context_dma);
+err_alloc_ep_context:
+	if (pdata->phy_deinit)
+		pdata->phy_deinit(u3d->phy_regs);
+	clk_disable(u3d->clk);
+err_u3d_enable:
+	iounmap(u3d->cap_regs);
+err_map_cap_regs:
+err_get_cap_regs:
+err_get_clk:
+	clk_put(u3d->clk);
+	platform_set_drvdata(dev, NULL);
+	kfree(u3d);
+err_alloc_private:
+err_pdata:
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_u3d_suspend(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+
+	/*
+	 * only cable is unplugged, usb can suspend.
+	 * So do not care about clock_gating == 1, it is handled by
+	 * vbus session.
+	 */
+	if (!u3d->clock_gating) {
+		mv_u3d_controller_stop(u3d);
+
+		spin_lock_irq(&u3d->lock);
+		/* stop all usb activities */
+		mv_u3d_stop_activity(u3d, u3d->driver);
+		spin_unlock_irq(&u3d->lock);
+
+		mv_u3d_disable(u3d);
+	}
+
+	return 0;
+}
+
+static int mv_u3d_resume(struct device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(dev);
+	int retval;
+
+	if (!u3d->clock_gating) {
+		retval = mv_u3d_enable(u3d);
+		if (retval)
+			return retval;
+
+		if (u3d->driver && u3d->softconnect) {
+			mv_u3d_controller_reset(u3d);
+			mv_u3d_ep0_reset(u3d);
+			mv_u3d_controller_start(u3d);
+		}
+	}
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
+#endif
+
+static void mv_u3d_shutdown(struct platform_device *dev)
+{
+	struct mv_u3d *u3d = dev_get_drvdata(&dev->dev);
+	u32 tmp;
+
+	tmp = ioread32(&u3d->op_regs->usbcmd);
+	tmp &= ~MV_U3D_CMD_RUN_STOP;
+	iowrite32(tmp, &u3d->op_regs->usbcmd);
+}
+
+static struct platform_driver mv_u3d_driver = {
+	.probe		= mv_u3d_probe,
+	.remove		= __exit_p(mv_u3d_remove),
+	.shutdown	= mv_u3d_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "mv-u3d",
+#ifdef CONFIG_PM
+		.pm	= &mv_u3d_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(mv_u3d_driver);
+MODULE_ALIAS("platform:mv-u3d");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 117a4bba1b8..75db2c306ce 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
@@ -1381,7 +1382,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 		return retval;
 	}
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 					&udc->gadget);
 		if (retval) {
@@ -2107,7 +2108,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 	 * then vbus irq will not be requested in udc driver.
 	 */
 	if (udc->pdata && udc->pdata->vbus
-		&& udc->clock_gating && udc->transceiver == NULL)
+		&& udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
 		free_irq(udc->pdata->vbus->irq, &dev->dev);
 
 	/* free memory allocated in probe */
@@ -2180,7 +2181,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 #ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->mode == MV_USB_MODE_OTG)
-		udc->transceiver = usb_get_transceiver();
+		udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 #endif
 
 	udc->clknum = pdata->clknum;
@@ -2325,7 +2326,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	eps_init(udc);
 
 	/* VBUS detect: we can disable/enable clock on demand.*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		udc->clock_gating = 1;
 	else if (pdata->vbus) {
 		udc->clock_gating = 1;
@@ -2369,7 +2370,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 err_unregister:
 	if (udc->pdata && udc->pdata->vbus
-		&& udc->clock_gating && udc->transceiver == NULL)
+		&& udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
 		free_irq(pdata->vbus->irq, &dev->dev);
 	device_unregister(&udc->gadget.dev);
 err_free_irq:
@@ -2404,7 +2405,7 @@ static int mv_udc_suspend(struct device *_dev)
 	struct mv_udc *udc = the_controller;
 
 	/* if OTG is enabled, the following will be done in OTG driver*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return 0;
 
 	if (udc->pdata->vbus && udc->pdata->vbus->poll)
@@ -2437,7 +2438,7 @@ static int mv_udc_resume(struct device *_dev)
 	int retval;
 
 	/* if OTG is enabled, the following will be done in OTG driver*/
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return 0;
 
 	if (!udc->clock_gating) {
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 89cbd2b22ab..f9132ada53b 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -35,10 +35,11 @@
 #include <linux/usb/otg.h>
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
@@ -60,11 +61,6 @@
 #define	DRIVER_DESC	"OMAP UDC driver"
 #define	DRIVER_VERSION	"4 October 2004"
 
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-#define OMAP2_DMA_CH(ch)	(((ch) - 1) << 1)
-#define OMAP24XX_DMA(name, ch)	(OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch))
-
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget
@@ -88,14 +84,14 @@
 #ifdef	USE_ISO
 static unsigned fifo_mode = 3;
 #else
-static unsigned fifo_mode = 0;
+static unsigned fifo_mode;
 #endif
 
 /* "modprobe omap_udc fifo_mode=42", or else as a kernel
  * boot parameter "omap_udc:fifo_mode=42"
  */
-module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
 
 #ifdef	USE_DMA
 static bool use_dma = 1;
@@ -103,8 +99,8 @@ static bool use_dma = 1;
 /* "modprobe omap_udc use_dma=y", or else as a kernel
  * boot parameter "omap_udc:use_dma=y"
  */
-module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
 #else	/* !USE_DMA */
 
 /* save a bit of code */
@@ -112,8 +108,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA");
 #endif	/* !USE_DMA */
 
 
-static const char driver_name [] = "omap_udc";
-static const char driver_desc [] = DRIVER_DESC;
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
 
 /*-------------------------------------------------------------------------*/
 
@@ -251,7 +247,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 	ep->ep.desc = NULL;
-	nuke (ep, -ESHUTDOWN);
+	nuke(ep, -ESHUTDOWN);
 	ep->ep.maxpacket = ep->maxpacket;
 	ep->has_dma = 0;
 	omap_writew(UDC_SET_HALT, UDC_CTRL);
@@ -272,10 +268,11 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct omap_req	*req;
 
 	req = kzalloc(sizeof(*req), gfp_flags);
-	if (req) {
-		req->req.dma = DMA_ADDR_INVALID;
-		INIT_LIST_HEAD (&req->queue);
-	}
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
 	return &req->req;
 }
 
@@ -284,8 +281,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 {
 	struct omap_req	*req = container_of(_req, struct omap_req, req);
 
-	if (_req)
-		kfree (req);
+	kfree(req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -293,6 +289,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
 static void
 done(struct omap_ep *ep, struct omap_req *req, int status)
 {
+	struct omap_udc		*udc = ep->udc;
 	unsigned		stopped = ep->stopped;
 
 	list_del_init(&req->queue);
@@ -302,22 +299,9 @@ done(struct omap_ep *ep, struct omap_req *req, int status)
 	else
 		status = req->req.status;
 
-	if (use_dma && ep->has_dma) {
-		if (req->mapped) {
-			dma_unmap_single(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->req.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else
-			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 #ifndef	USB_TRACE
 	if (status && status != -ESHUTDOWN)
@@ -365,10 +349,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
 	return len;
 }
 
-// FIXME change r/w fifo calling convention
+/* FIXME change r/w fifo calling convention */
 
 
-// return:  0 = still running, 1 = completed, negative = errno
+/* return:  0 = still running, 1 = completed, negative = errno */
 static int write_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -430,7 +414,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
 	return len;
 }
 
-// return:  0 = still running, 1 = queue empty, negative = errno
+/* return:  0 = still running, 1 = queue empty, negative = errno */
 static int read_fifo(struct omap_ep *ep, struct omap_req *req)
 {
 	u8		*buf;
@@ -537,12 +521,8 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
 				: OMAP_DMA_SYNC_ELEMENT;
 	int		dma_trigger = 0;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel);
-
 	/* measure length in either bytes or packets */
 	if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
-			|| (cpu_is_omap24xx() && length < ep->maxpacket)
 			|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
 		txdma_ctrl = UDC_TXN_EOT | length;
 		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
@@ -601,28 +581,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
 	int dma_trigger = 0;
 	u16 w;
 
-	if (cpu_is_omap24xx())
-		dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
-
-	/* NOTE:  we filtered out "short reads" before, so we know
-	 * the buffer has only whole numbers of packets.
-	 * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode
-	 */
-	if (cpu_is_omap24xx() && packets < ep->maxpacket) {
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-				packets, 1, OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-		req->dma_bytes = packets;
-	} else {
-		/* set up this DMA transfer, enable the fifo, start */
-		packets /= ep->ep.maxpacket;
-		packets = min(packets, (unsigned)UDC_RXN_TC + 1);
-		req->dma_bytes = packets * ep->ep.maxpacket;
-		omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
-				ep->ep.maxpacket >> 1, packets,
-				OMAP_DMA_SYNC_ELEMENT,
-				dma_trigger, 0);
-	}
+	/* set up this DMA transfer, enable the fifo, start */
+	packets /= ep->ep.maxpacket;
+	packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+	req->dma_bytes = packets * ep->ep.maxpacket;
+	omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+			ep->ep.maxpacket >> 1, packets,
+			OMAP_DMA_SYNC_ELEMENT,
+			dma_trigger, 0);
 	omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
 		OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
 		0, 0);
@@ -684,7 +650,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_in_dma(ep, req);
@@ -703,7 +669,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
 		}
 		omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
 
-		if (!list_empty (&ep->queue)) {
+		if (!list_empty(&ep->queue)) {
 			req = container_of(ep->queue.next,
 					struct omap_req, queue);
 			next_out_dma(ep, req);
@@ -761,10 +727,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 	ep->dma_channel = channel;
 
 	if (is_in) {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
+		dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -781,11 +744,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 				0, 0);
 		}
 	} else {
-		if (cpu_is_omap24xx())
-			dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel);
-		else
-			dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
-
+		dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
 		status = omap_request_dma(dma_channel,
 			ep->ep.name, dma_error, ep, &ep->lch);
 		if (status == 0) {
@@ -809,7 +768,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 		omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
 
 		/* channel type P: hw synch (fifo) */
-		if (cpu_class_is_omap1() && !cpu_is_omap15xx())
+		if (!cpu_is_omap15xx())
 			omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
 	}
 
@@ -929,13 +888,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* this isn't bogus, but OMAP DMA isn't the only hardware to
 	 * have a hard time with partial packet reads...  reject it.
-	 * Except OMAP2 can handle the small packets.
 	 */
 	if (use_dma
 			&& ep->has_dma
 			&& ep->bEndpointAddress != 0
 			&& (ep->bEndpointAddress & USB_DIR_IN) == 0
-			&& !cpu_class_is_omap2()
 			&& (req->req.length % ep->ep.maxpacket) != 0) {
 		DBG("%s, no partial packet OUT reads\n", __func__);
 		return -EMSGSIZE;
@@ -945,26 +902,9 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	if (use_dma && ep->has_dma) {
-		if (req->req.dma == DMA_ADDR_INVALID) {
-			req->req.dma = dma_map_single(
-				ep->udc->gadget.dev.parent,
-				req->req.buf,
-				req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 1;
-		} else {
-			dma_sync_single_for_device(
-				ep->udc->gadget.dev.parent,
-				req->req.dma, req->req.length,
-				(ep->bEndpointAddress & USB_DIR_IN)
-					? DMA_TO_DEVICE
-					: DMA_FROM_DEVICE);
-			req->mapped = 0;
-		}
-	}
+	if (use_dma && ep->has_dma)
+		usb_gadget_map_request(&udc->gadget, &req->req,
+				(ep->bEndpointAddress & USB_DIR_IN));
 
 	VDBG("%s queue req %p, len %d buf %p\n",
 		ep->ep.name, _req, _req->length, _req->buf);
@@ -985,7 +925,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		int	is_in;
 
 		if (ep->bEndpointAddress == 0) {
-			if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+			if (!udc->ep0_pending || !list_empty(&ep->queue)) {
 				spin_unlock_irqrestore(&udc->lock, flags);
 				return -EL2HLT;
 			}
@@ -1012,7 +952,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 				 * always an IN ... even for IN transfers,
 				 * a weird case which seem to stall OMAP.
 				 */
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 				omap_writew(UDC_CLR_EP, UDC_CTRL);
 				omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
 				omap_writew(UDC_EP_DIR, UDC_EP_NUM);
@@ -1024,7 +965,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 			/* non-empty DATA stage */
 			} else if (is_in) {
-				omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+				omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+						UDC_EP_NUM);
 			} else {
 				if (udc->ep0_setup)
 					goto irq_wait;
@@ -1072,7 +1014,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
 	/* make sure it's actually queued on this endpoint */
-	list_for_each_entry (req, &ep->queue, queue) {
+	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req)
 			break;
 	}
@@ -1179,8 +1121,8 @@ static struct usb_ep_ops omap_ep_ops = {
 	.dequeue	= omap_ep_dequeue,
 
 	.set_halt	= omap_ep_set_halt,
-	// fifo_status ... report bytes in fifo
-	// fifo_flush ... flush fifo
+	/* fifo_status ... report bytes in fifo */
+	/* fifo_flush ... flush fifo */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1212,7 +1154,7 @@ static int omap_wakeup(struct usb_gadget *gadget)
 
 	/* NOTE:  non-OTG systems may use SRP TOO... */
 	} else if (!(udc->devstat & UDC_ATT)) {
-		if (udc->transceiver)
+		if (!IS_ERR_OR_NULL(udc->transceiver))
 			retval = otg_start_srp(udc->transceiver->otg);
 	}
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1344,7 +1286,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	struct omap_udc	*udc;
 
 	udc = container_of(gadget, struct omap_udc, gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1410,7 +1352,7 @@ static void udc_quiesce(struct omap_udc *udc)
 
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	nuke(&udc->ep[0], -ESHUTDOWN);
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1526,7 +1468,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* read next OUT packet of request, maybe
 				 * reactiviting the fifo; stall on errors.
 				 */
-				if (!req || (stat = read_fifo(ep0, req)) < 0) {
+				stat = read_fifo(ep0, req);
+				if (!req || stat < 0) {
 					omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
 					udc->ep0_pending = 0;
 					stat = 0;
@@ -1659,7 +1602,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				/* this has rude side-effects (aborts) and
 				 * can't really work if DMA-IN is active
 				 */
-				DBG("%s host set_halt, NYET \n", ep->name);
+				DBG("%s host set_halt, NYET\n", ep->name);
 				goto do_stall;
 			}
 			use_ep(ep, 0);
@@ -1750,7 +1693,7 @@ delegate:
 			 */
 			udc->ep0_setup = 1;
 			spin_unlock(&udc->lock);
-			status = udc->driver->setup (&udc->gadget, &u.r);
+			status = udc->driver->setup(&udc->gadget, &u.r);
 			spin_lock(&udc->lock);
 			udc->ep0_setup = 0;
 		}
@@ -1793,12 +1736,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 			if (devstat & UDC_ATT) {
 				udc->gadget.speed = USB_SPEED_FULL;
 				VDBG("connect\n");
-				if (!udc->transceiver)
+				if (IS_ERR_OR_NULL(udc->transceiver))
 					pullup_enable(udc);
-				// if (driver->connect) call it
+				/* if (driver->connect) call it */
 			} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
 				udc->gadget.speed = USB_SPEED_UNKNOWN;
-				if (!udc->transceiver)
+				if (IS_ERR_OR_NULL(udc->transceiver))
 					pullup_disable(udc);
 				DBG("disconnect, gadget %s\n",
 					udc->driver->driver.name);
@@ -1827,7 +1770,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 	}
 	if (change & UDC_SUS) {
 		if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-			// FIXME tell isp1301 to suspend/resume (?)
+			/* FIXME tell isp1301 to suspend/resume (?) */
 			if (devstat & UDC_SUS) {
 				VDBG("suspend\n");
 				update_otg(udc);
@@ -1838,12 +1781,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 					udc->driver->suspend(&udc->gadget);
 					spin_lock(&udc->lock);
 				}
-				if (udc->transceiver)
+				if (!IS_ERR_OR_NULL(udc->transceiver))
 					usb_phy_set_suspend(
 							udc->transceiver, 1);
 			} else {
 				VDBG("resume\n");
-				if (udc->transceiver)
+				if (!IS_ERR_OR_NULL(udc->transceiver))
 					usb_phy_set_suspend(
 							udc->transceiver, 0);
 				if (udc->gadget.speed == USB_SPEED_FULL
@@ -2030,7 +1973,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 	spin_lock_irqsave(&udc->lock, flags);
 
 	/* handle all non-DMA ISO transfers */
-	list_for_each_entry (ep, &udc->iso, iso) {
+	list_for_each_entry(ep, &udc->iso, iso) {
 		u16		stat;
 		struct omap_req	*req;
 
@@ -2089,15 +2032,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 
 static inline int machine_without_vbus_sense(void)
 {
-	return (machine_is_omap_innovator()
+	return machine_is_omap_innovator()
 		|| machine_is_omap_osk()
-		|| machine_is_omap_apollon()
-#ifndef CONFIG_MACH_OMAP_H4_OTG
-		|| machine_is_omap_h4()
-#endif
 		|| machine_is_sx1()
-		|| cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
-		);
+		/* No known omap7xx boards with vbus sense */
+		|| cpu_is_omap7xx();
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
@@ -2111,7 +2050,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	if (!udc)
 		return -ENODEV;
 	if (!driver
-			// FIXME if otg, check:  driver->is_otg
+			/* FIXME if otg, check:  driver->is_otg */
 			|| driver->max_speed < USB_SPEED_FULL
 			|| !bind || !driver->setup)
 		return -EINVAL;
@@ -2123,7 +2062,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	}
 
 	/* reset state */
-	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
 		ep->irqs = 0;
 		if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
 			continue;
@@ -2155,13 +2094,13 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
 
 	/* connect to bus through transceiver */
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		status = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
 		if (status < 0) {
 			ERR("can't bind to transceiver\n");
 			if (driver->unbind) {
-				driver->unbind (&udc->gadget);
+				driver->unbind(&udc->gadget);
 				udc->gadget.dev.driver = NULL;
 				udc->driver = NULL;
 			}
@@ -2169,9 +2108,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 		}
 	} else {
 		if (can_pullup(udc))
-			pullup_enable (udc);
+			pullup_enable(udc);
 		else
-			pullup_disable (udc);
+			pullup_disable(udc);
 	}
 
 	/* boards that don't have VBUS sensing can't autogate 48MHz;
@@ -2202,7 +2141,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 	if (machine_without_vbus_sense())
 		omap_vbus_session(&udc->gadget, 0);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		(void) otg_set_peripheral(udc->transceiver->otg, NULL);
 	else
 		pullup_disable(udc);
@@ -2230,7 +2169,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 static const char proc_filename[] = "driver/udc";
 
 #define FOURBITS "%s%s%s%s"
-#define EIGHTBITS FOURBITS FOURBITS
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
 
 static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 {
@@ -2252,12 +2191,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
 		ep->name, buf,
 		ep->double_buf ? "dbuf " : "",
-		({char *s; switch(ep->ackwait){
-		case 0: s = ""; break;
-		case 1: s = "(ackw) "; break;
-		case 2: s = "(ackw2) "; break;
-		default: s = "(?) "; break;
-		} s;}),
+		({ char *s;
+		switch (ep->ackwait) {
+		case 0:
+			s = "";
+			break;
+		case 1:
+			s = "(ackw) ";
+			break;
+		case 2:
+			s = "(ackw2) ";
+			break;
+		default:
+			s = "(?) ";
+			break;
+		} s; }),
 		ep->irqs, stat_flg,
 		(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
 		(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
@@ -2273,10 +2221,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 		(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
 		(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
 
-	if (list_empty (&ep->queue))
+	if (list_empty(&ep->queue))
 		seq_printf(s, "\t(queue empty)\n");
 	else
-		list_for_each_entry (req, &ep->queue, queue) {
+		list_for_each_entry(req, &ep->queue, queue) {
 			unsigned	length = req->req.actual;
 
 			if (use_dma && buf[0]) {
@@ -2294,11 +2242,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 static char *trx_mode(unsigned m, int enabled)
 {
 	switch (m) {
-	case 0:		return enabled ? "*6wire" : "unused";
-	case 1:		return "4wire";
-	case 2:		return "3wire";
-	case 3:		return "6wire";
-	default:	return "unknown";
+	case 0:
+		return enabled ? "*6wire" : "unused";
+	case 1:
+		return "4wire";
+	case 2:
+		return "3wire";
+	case 3:
+		return "6wire";
+	default:
+		return "unknown";
 	}
 }
 
@@ -2308,12 +2261,9 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans = 0;
 	char		*ctrl_name = "(UNKNOWN)";
 
-	/* XXX This needs major revision for OMAP2+ */
 	tmp = omap_readl(OTG_REV);
-	if (cpu_class_is_omap1()) {
-		ctrl_name = "tranceiver_ctrl";
-		trans = omap_readw(USB_TRANSCEIVER_CTRL);
-	}
+	ctrl_name = "tranceiver_ctrl";
+	trans = omap_readw(USB_TRANSCEIVER_CTRL);
 	seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
 		tmp >> 4, tmp & 0xf, ctrl_name, trans);
 	tmp = omap_readw(OTG_SYSCON_1);
@@ -2333,7 +2283,7 @@ static int proc_otg_show(struct seq_file *s)
 			" b_ase_brst=%d hmc=%d\n", tmp,
 		(tmp & OTG_EN) ? " otg_en" : "",
 		(tmp & USBX_SYNCHRO) ? " synchro" : "",
-		// much more SRP stuff
+		/* much more SRP stuff */
 		(tmp & SRP_DATA) ? " srp_data" : "",
 		(tmp & SRP_VBUS) ? " srp_vbus" : "",
 		(tmp & OTG_PADEN) ? " otg_paden" : "",
@@ -2400,14 +2350,12 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		HMC,
 		udc->transceiver
 			? udc->transceiver->label
-			: ((cpu_is_omap1710() || cpu_is_omap24xx())
+			: (cpu_is_omap1710()
 				? "external" : "(none)"));
-	if (cpu_class_is_omap1()) {
-		seq_printf(s, "ULPD control %04x req %04x status %04x\n",
-			omap_readw(ULPD_CLOCK_CTRL),
-			omap_readw(ULPD_SOFT_REQ),
-			omap_readw(ULPD_STATUS_REQ));
-	}
+	seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+		omap_readw(ULPD_CLOCK_CTRL),
+		omap_readw(ULPD_SOFT_REQ),
+		omap_readw(ULPD_STATUS_REQ));
 
 	/* OTG controller registers */
 	if (!cpu_is_omap15xx())
@@ -2423,7 +2371,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
 		(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
 		(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
-	// syscon2 is write-only
+	/* syscon2 is write-only */
 
 	/* UDC controller registers */
 	if (!(tmp & UDC_PULLUP_EN)) {
@@ -2507,7 +2455,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 	if (tmp & UDC_ATT) {
 		proc_ep_show(s, &udc->ep[0]);
 		if (tmp & UDC_ADD) {
-			list_for_each_entry (ep, &udc->gadget.ep_list,
+			list_for_each_entry(ep, &udc->gadget.ep_list,
 					ep.ep_list) {
 				if (ep->ep.desc)
 					proc_ep_show(s, ep);
@@ -2558,7 +2506,7 @@ static inline void remove_proc_file(void) {}
  * UDC_SYSCON_1.CFG_LOCK is set can now work.  We won't use that
  * capability yet though.
  */
-static unsigned __init
+static unsigned __devinit
 omap_ep_setup(char *name, u8 addr, u8 type,
 		unsigned buf, unsigned maxp, int dbuf)
 {
@@ -2576,14 +2524,29 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	/* chip setup ... bit values are same for IN, OUT */
 	if (type == USB_ENDPOINT_XFER_ISOC) {
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		case 128:	epn_rxtx = 4 << 12; break;
-		case 256:	epn_rxtx = 5 << 12; break;
-		case 512:	epn_rxtx = 6 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		case 128:
+			epn_rxtx = 4 << 12;
+			break;
+		case 256:
+			epn_rxtx = 5 << 12;
+			break;
+		case 512:
+			epn_rxtx = 6 << 12;
+			break;
+		default:
+			BUG();
 		}
 		epn_rxtx |= UDC_EPN_RX_ISO;
 		dbuf = 1;
@@ -2592,15 +2555,24 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 		 * and ignored for PIO-IN on newer chips
 		 * (for more reliable behavior)
 		 */
-		if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
+		if (!use_dma || cpu_is_omap15xx())
 			dbuf = 0;
 
 		switch (maxp) {
-		case 8:		epn_rxtx = 0 << 12; break;
-		case 16:	epn_rxtx = 1 << 12; break;
-		case 32:	epn_rxtx = 2 << 12; break;
-		case 64:	epn_rxtx = 3 << 12; break;
-		default:	BUG();
+		case 8:
+			epn_rxtx = 0 << 12;
+			break;
+		case 16:
+			epn_rxtx = 1 << 12;
+			break;
+		case 32:
+			epn_rxtx = 2 << 12;
+			break;
+		case 64:
+			epn_rxtx = 3 << 12;
+			break;
+		default:
+			BUG();
 		}
 		if (dbuf && addr)
 			epn_rxtx |= UDC_EPN_RX_DB;
@@ -2640,7 +2612,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 	ep->ep.name = ep->name;
 	ep->ep.ops = &omap_ep_ops;
 	ep->ep.maxpacket = ep->maxpacket = maxp;
-	list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+	list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
 	return buf;
 }
@@ -2648,11 +2620,11 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 static void omap_udc_release(struct device *dev)
 {
 	complete(udc->done);
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 }
 
-static int __init
+static int __devinit
 omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 {
 	unsigned	tmp, buf;
@@ -2666,13 +2638,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	omap_writew(0, UDC_TXDMA_CFG);
 
 	/* UDC_PULLUP_EN gates the chip clock */
-	// OTG_SYSCON_1 |= DEV_IDLE_EN;
+	/* OTG_SYSCON_1 |= DEV_IDLE_EN; */
 
 	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
 	if (!udc)
 		return -ENOMEM;
 
-	spin_lock_init (&udc->lock);
+	spin_lock_init(&udc->lock);
 
 	udc->gadget.ops = &omap_gadget_ops;
 	udc->gadget.ep0 = &udc->ep[0].ep;
@@ -2702,13 +2674,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 		omap_writew(0, UDC_EP_TX(tmp));
 	}
 
-#define OMAP_BULK_EP(name,addr) \
+#define OMAP_BULK_EP(name, addr) \
 	buf = omap_ep_setup(name "-bulk", addr, \
 			USB_ENDPOINT_XFER_BULK, buf, 64, 1);
-#define OMAP_INT_EP(name,addr, maxp) \
+#define OMAP_INT_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-int", addr, \
 			USB_ENDPOINT_XFER_INT, buf, maxp, 0);
-#define OMAP_ISO_EP(name,addr, maxp) \
+#define OMAP_ISO_EP(name, addr, maxp) \
 	buf = omap_ep_setup(name "-iso", addr, \
 			USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
 
@@ -2789,15 +2761,18 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
 	return 0;
 }
 
-static int __init omap_udc_probe(struct platform_device *pdev)
+static int __devinit omap_udc_probe(struct platform_device *pdev)
 {
 	int			status = -ENODEV;
 	int			hmc;
 	struct usb_phy		*xceiv = NULL;
 	const char		*type = NULL;
 	struct omap_usb_config	*config = pdev->dev.platform_data;
-	struct clk		*dc_clk;
-	struct clk		*hhc_clk;
+	struct clk		*dc_clk = NULL;
+	struct clk		*hhc_clk = NULL;
+
+	if (cpu_is_omap7xx())
+		use_dma = 0;
 
 	/* NOTE:  "knows" the order of the resources! */
 	if (!request_mem_region(pdev->resource[0].start,
@@ -2817,16 +2792,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		udelay(100);
 	}
 
-	if (cpu_is_omap24xx()) {
-		dc_clk = clk_get(&pdev->dev, "usb_fck");
-		hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
-		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
-		/* can't use omap_udc_enable_clock yet */
-		clk_enable(dc_clk);
-		clk_enable(hhc_clk);
-		udelay(100);
-	}
-
 	if (cpu_is_omap7xx()) {
 		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
 		hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
@@ -2866,8 +2831,8 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		 * use it.  Except for OTG, we don't _need_ to talk to one;
 		 * but not having one probably means no VBUS detection.
 		 */
-		xceiv = usb_get_transceiver();
-		if (xceiv)
+		xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (!IS_ERR_OR_NULL(xceiv))
 			type = xceiv->label;
 		else if (config->otg) {
 			DBG("OTG requires external transceiver!\n");
@@ -2876,14 +2841,6 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 
 		hmc = HMC_1610;
 
-		if (cpu_is_omap24xx()) {
-			/* this could be transceiverless in one of the
-			 * "we don't need to know" modes.
-			 */
-			type = "external";
-			goto known;
-		}
-
 		switch (hmc) {
 		case 0:			/* POWERUP DEFAULT == 0 */
 		case 4:
@@ -2899,7 +2856,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		case 16:
 		case 19:
 		case 25:
-			if (!xceiv) {
+			if (IS_ERR_OR_NULL(xceiv)) {
 				DBG("external transceiver not registered!\n");
 				type = "unknown";
 			}
@@ -2922,16 +2879,16 @@ bad_on_1710:
 			goto cleanup0;
 		}
 	}
-known:
+
 	INFO("hmc mode %d, %s transceiver\n", hmc, type);
 
 	/* a "gadget" abstracts/virtualizes the controller */
 	status = omap_udc_setup(pdev, xceiv);
-	if (status) {
+	if (status)
 		goto cleanup0;
-	}
+
 	xceiv = NULL;
-	// "udc" is now valid
+	/* "udc" is now valid */
 	pullup_disable(udc);
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	udc->gadget.is_otg = (config->otg != 0);
@@ -2945,7 +2902,7 @@ known:
 
 	/* USB general purpose IRQ:  ep0, state changes, dma, etc */
 	status = request_irq(pdev->resource[1].start, omap_udc_irq,
-			IRQF_SAMPLE_RANDOM, driver_name, udc);
+			0, driver_name, udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[1].start, status);
@@ -2954,7 +2911,7 @@ known:
 
 	/* USB "non-iso" IRQ (PIO for all but ep0) */
 	status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-			IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
+			0, "omap_udc pio", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[2].start, status);
@@ -2976,16 +2933,6 @@ known:
 		clk_disable(dc_clk);
 	}
 
-	if (cpu_is_omap24xx()) {
-		udc->dc_clk = dc_clk;
-		udc->hhc_clk = hhc_clk;
-		/* FIXME OMAP2 don't release hhc & dc clock */
-#if 0
-		clk_disable(hhc_clk);
-		clk_disable(dc_clk);
-#endif
-	}
-
 	create_proc_file();
 	status = device_add(&udc->gadget.dev);
 	if (status)
@@ -3007,14 +2954,14 @@ cleanup2:
 	free_irq(pdev->resource[1].start, udc);
 
 cleanup1:
-	kfree (udc);
+	kfree(udc);
 	udc = NULL;
 
 cleanup0:
-	if (xceiv)
-		usb_put_transceiver(xceiv);
+	if (!IS_ERR_OR_NULL(xceiv))
+		usb_put_phy(xceiv);
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		clk_disable(hhc_clk);
 		clk_disable(dc_clk);
 		clk_put(hhc_clk);
@@ -3027,7 +2974,7 @@ cleanup0:
 	return status;
 }
 
-static int __exit omap_udc_remove(struct platform_device *pdev)
+static int __devexit omap_udc_remove(struct platform_device *pdev)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 
@@ -3041,8 +2988,8 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 	udc->done = &done;
 
 	pullup_disable(udc);
-	if (udc->transceiver) {
-		usb_put_transceiver(udc->transceiver);
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
+		usb_put_phy(udc->transceiver);
 		udc->transceiver = NULL;
 	}
 	omap_writew(0, UDC_SYSCON1);
@@ -3112,7 +3059,8 @@ static int omap_udc_resume(struct platform_device *dev)
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-	.remove		= __exit_p(omap_udc_remove),
+	.probe		= omap_udc_probe,
+	.remove		= __devexit_p(omap_udc_remove),
 	.suspend	= omap_udc_suspend,
 	.resume		= omap_udc_resume,
 	.driver		= {
@@ -3121,27 +3069,7 @@ static struct platform_driver udc_driver = {
 	},
 };
 
-static int __init udc_init(void)
-{
-	/* Disable DMA for omap7xx -- it doesn't work right. */
-	if (cpu_is_omap7xx())
-		use_dma = 0;
-
-	INFO("%s, version: " DRIVER_VERSION
-#ifdef	USE_ISO
-		" (iso)"
-#endif
-		"%s\n", driver_desc,
-		use_dma ?  " (dma)" : "");
-	return platform_driver_probe(&udc_driver, omap_udc_probe);
-}
-module_init(udc_init);
-
-static void __exit udc_exit(void)
-{
-	platform_driver_unregister(&udc_driver);
-}
-module_exit(udc_exit);
+module_platform_driver(udc_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 1cfcc9ecbfb..f4fb71c9ae0 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
 			return;
 		}
 		if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
-			if (td->status | PCH_UDC_DMA_LAST) {
+			if (td->status & PCH_UDC_DMA_LAST) {
 				count = td->status & PCH_UDC_RXTX_BYTES;
 				break;
 			}
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index f7ff9e8e746..53c093b941e 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -21,6 +21,7 @@
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -993,7 +994,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1299,7 +1300,7 @@ fail:
 	DMSG("registered gadget driver '%s'\n", driver->driver.name);
 
 	/* connect to bus through transceiver */
-	if (dev->transceiver) {
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
 		retval = otg_set_peripheral(dev->transceiver->otg,
 						&dev->gadget);
 		if (retval) {
@@ -1359,7 +1360,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver)
 	stop_activity(dev, driver);
 	local_irq_enable();
 
-	if (dev->transceiver)
+	if (!IS_ERR_OR_NULL(dev->transceiver))
 		(void) otg_set_peripheral(dev->transceiver->otg, NULL);
 
 	driver->unbind(&dev->gadget);
@@ -2159,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 
-	dev->transceiver = usb_get_transceiver();
+	dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
@@ -2237,8 +2238,8 @@ lubbock_fail0:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (dev->transceiver) {
-		usb_put_transceiver(dev->transceiver);
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
+		usb_put_phy(dev->transceiver);
 		dev->transceiver = NULL;
 	}
 	clk_put(dev->clk);
@@ -2279,8 +2280,8 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 
 	clk_put(dev->clk);
 
-	if (dev->transceiver) {
-		usb_put_transceiver(dev->transceiver);
+	if (!IS_ERR_OR_NULL(dev->transceiver)) {
+		usb_put_phy(dev->transceiver);
 		dev->transceiver = NULL;
 	}
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 98acb3ab9e1..644b4305cb9 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/list.h>
@@ -1573,7 +1574,7 @@ static int should_enable_udc(struct pxa_udc *udc)
 	int put_on;
 
 	put_on = ((udc->pullup_on) && (udc->driver));
-	put_on &= ((udc->vbus_sensed) || (!udc->transceiver));
+	put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver)));
 	return put_on;
 }
 
@@ -1594,7 +1595,7 @@ static int should_disable_udc(struct pxa_udc *udc)
 	int put_off;
 
 	put_off = ((!udc->pullup_on) || (!udc->driver));
-	put_off |= ((!udc->vbus_sensed) && (udc->transceiver));
+	put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver)));
 	return put_off;
 }
 
@@ -1665,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	struct pxa_udc *udc;
 
 	udc = to_gadget_udc(_gadget);
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
@@ -1834,7 +1835,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 	dev_dbg(udc->dev, "registered gadget driver '%s'\n",
 		driver->driver.name);
 
-	if (udc->transceiver) {
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
 		if (retval) {
@@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
 	dev_info(udc->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
 
-	if (udc->transceiver)
+	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
 	return 0;
 }
@@ -2464,7 +2465,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
 	udc->dev = &pdev->dev;
 	udc->mach = pdev->dev.platform_data;
-	udc->transceiver = usb_get_transceiver();
+	udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
 	gpio = udc->mach->gpio_pullup;
 	if (gpio_is_valid(gpio)) {
@@ -2543,7 +2544,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
 	if (gpio_is_valid(gpio))
 		gpio_free(gpio);
 
-	usb_put_transceiver(udc->transceiver);
+	usb_put_phy(udc->transceiver);
 
 	udc->transceiver = NULL;
 	platform_set_drvdata(_dev, NULL);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index f4abb0ed987..b13e0bb5f5b 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -112,7 +112,6 @@ struct s3c_hsotg_ep {
 	struct s3c_hsotg_req	*req;
 	struct dentry		*debugfs;
 
-	spinlock_t		lock;
 
 	unsigned long		total_data;
 	unsigned int		size_loaded;
@@ -136,7 +135,6 @@ struct s3c_hsotg_ep {
  * @driver: USB gadget driver
  * @plat: The platform specific configuration data.
  * @regs: The memory area mapped for accessing registers.
- * @regs_res: The resource that was allocated when claiming register space.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
@@ -157,8 +155,9 @@ struct s3c_hsotg {
 	struct usb_gadget_driver *driver;
 	struct s3c_hsotg_plat	 *plat;
 
+	spinlock_t              lock;
+
 	void __iomem		*regs;
-	struct resource		*regs_res;
 	int			irq;
 	struct clk		*clk;
 
@@ -896,7 +895,6 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	struct s3c_hsotg_req *hs_req = our_req(req);
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
 	struct s3c_hsotg *hs = hs_ep->parent;
-	unsigned long irqflags;
 	bool first;
 
 	dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
@@ -915,19 +913,30 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 			return ret;
 	}
 
-	spin_lock_irqsave(&hs_ep->lock, irqflags);
-
 	first = list_empty(&hs_ep->queue);
 	list_add_tail(&hs_req->queue, &hs_ep->queue);
 
 	if (first)
 		s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
 
-	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
-
 	return 0;
 }
 
+static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
+			      gfp_t gfp_flags)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
 static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
 				      struct usb_request *req)
 {
@@ -1383,9 +1392,9 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 	 */
 
 	if (hs_req->req.complete) {
-		spin_unlock(&hs_ep->lock);
+		spin_unlock(&hsotg->lock);
 		hs_req->req.complete(&hs_ep->ep, &hs_req->req);
-		spin_lock(&hs_ep->lock);
+		spin_lock(&hsotg->lock);
 	}
 
 	/*
@@ -1404,28 +1413,6 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 }
 
 /**
- * s3c_hsotg_complete_request_lock - complete a request given to us (locked)
- * @hsotg: The device state.
- * @hs_ep: The endpoint the request was on.
- * @hs_req: The request to complete.
- * @result: The result code (0 => Ok, otherwise errno)
- *
- * See s3c_hsotg_complete_request(), but called with the endpoint's
- * lock held.
- */
-static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
-					    struct s3c_hsotg_ep *hs_ep,
-					    struct s3c_hsotg_req *hs_req,
-					    int result)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&hs_ep->lock, flags);
-	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
-}
-
-/**
  * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
  * @hsotg: The device state.
  * @ep_idx: The endpoint index for the data
@@ -1444,6 +1431,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	int max_req;
 	int read_ptr;
 
+
 	if (!hs_req) {
 		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
 		int ptr;
@@ -1459,8 +1447,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 		return;
 	}
 
-	spin_lock(&hs_ep->lock);
-
 	to_read = size;
 	read_ptr = hs_req->req.actual;
 	max_req = hs_req->req.length - read_ptr;
@@ -1487,8 +1473,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	 * alignment of the data.
 	 */
 	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
-
-	spin_unlock(&hs_ep->lock);
 }
 
 /**
@@ -1609,7 +1593,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 			s3c_hsotg_send_zlp(hsotg, hs_req);
 	}
 
-	s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result);
+	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
 
 /**
@@ -1864,7 +1848,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 	/* Finish ZLP handling for IN EP0 transactions */
 	if (hsotg->eps[0].sent_zlp) {
 		dev_dbg(hsotg->dev, "zlp packet received\n");
-		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 		return;
 	}
 
@@ -1915,7 +1899,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
 		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
 	} else
-		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 }
 
 /**
@@ -2123,9 +2107,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 			      int result, bool force)
 {
 	struct s3c_hsotg_req *req, *treq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ep->lock, flags);
 
 	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
 		/*
@@ -2139,14 +2120,15 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		s3c_hsotg_complete_request(hsotg, ep, req,
 					   result);
 	}
-
-	spin_unlock_irqrestore(&ep->lock, flags);
 }
 
 #define call_gadget(_hs, _entry) \
 	if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN &&	\
-	    (_hs)->driver && (_hs)->driver->_entry)	\
-		(_hs)->driver->_entry(&(_hs)->gadget);
+	    (_hs)->driver && (_hs)->driver->_entry) { \
+		spin_unlock(&_hs->lock); \
+		(_hs)->driver->_entry(&(_hs)->gadget); \
+		spin_lock(&_hs->lock); \
+		}
 
 /**
  * s3c_hsotg_disconnect - disconnect service
@@ -2388,6 +2370,7 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
 	u32 gintsts;
 	u32 gintmsk;
 
+	spin_lock(&hsotg->lock);
 irq_retry:
 	gintsts = readl(hsotg->regs + GINTSTS);
 	gintmsk = readl(hsotg->regs + GINTMSK);
@@ -2557,6 +2540,8 @@ irq_retry:
 	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
 			goto irq_retry;
 
+	spin_unlock(&hsotg->lock);
+
 	return IRQ_HANDLED;
 }
 
@@ -2604,7 +2589,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
 		__func__, epctrl, epctrl_reg);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK);
 	epctrl |= DxEPCTL_MPS(mps);
@@ -2683,7 +2668,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
 
 out:
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return ret;
 }
 
@@ -2710,10 +2695,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
+	spin_lock_irqsave(&hsotg->lock, flags);
 	/* terminate all requests with shutdown */
 	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
 
 	ctrl = readl(hsotg->regs + epctrl_reg);
 	ctrl &= ~DxEPCTL_EPEna;
@@ -2726,7 +2711,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	/* disable endpoint interrupts */
 	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
 
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return 0;
 }
 
@@ -2761,15 +2746,15 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
 
-	spin_lock_irqsave(&hs_ep->lock, flags);
+	spin_lock_irqsave(&hs->lock, flags);
 
 	if (!on_list(hs_ep, hs_req)) {
-		spin_unlock_irqrestore(&hs_ep->lock, flags);
+		spin_unlock_irqrestore(&hs->lock, flags);
 		return -EINVAL;
 	}
 
 	s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
-	spin_unlock_irqrestore(&hs_ep->lock, flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
 
 	return 0;
 }
@@ -2784,15 +2769,12 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
 	struct s3c_hsotg *hs = hs_ep->parent;
 	int index = hs_ep->index;
-	unsigned long irqflags;
 	u32 epreg;
 	u32 epctl;
 	u32 xfertype;
 
 	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
 
-	spin_lock_irqsave(&hs_ep->lock, irqflags);
-
 	/* write both IN and OUT control registers */
 
 	epreg = DIEPCTL(index);
@@ -2827,19 +2809,36 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	writel(epctl, hs->regs + epreg);
 
-	spin_unlock_irqrestore(&hs_ep->lock, irqflags);
-
 	return 0;
 }
 
+/**
+ * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct s3c_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_sethalt(ep, value);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
 static struct usb_ep_ops s3c_hsotg_ep_ops = {
 	.enable		= s3c_hsotg_ep_enable,
 	.disable	= s3c_hsotg_ep_disable,
 	.alloc_request	= s3c_hsotg_ep_alloc_request,
 	.free_request	= s3c_hsotg_ep_free_request,
-	.queue		= s3c_hsotg_ep_queue,
+	.queue		= s3c_hsotg_ep_queue_lock,
 	.dequeue	= s3c_hsotg_ep_dequeue,
-	.set_halt	= s3c_hsotg_ep_sethalt,
+	.set_halt	= s3c_hsotg_ep_sethalt_lock,
 	/* note, don't believe we have any call for the fifo routines */
 };
 
@@ -2954,6 +2953,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 	driver->driver.bus = NULL;
 	hsotg->driver = driver;
 	hsotg->gadget.dev.driver = &driver->driver;
+	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
 	hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
@@ -2964,9 +2964,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 		goto err;
 	}
 
-	s3c_hsotg_phy_enable(hsotg);
-
-	s3c_hsotg_core_init(hsotg);
 	hsotg->last_rst = jiffies;
 	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
 	return 0;
@@ -2988,6 +2985,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 			  struct usb_gadget_driver *driver)
 {
 	struct s3c_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
 	int ep;
 
 	if (!hsotg)
@@ -3000,6 +2998,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 	for (ep = 0; ep < hsotg->num_of_eps; ep++)
 		s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
 
+	spin_lock_irqsave(&hsotg->lock, flags);
+
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
@@ -3007,6 +3007,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 	hsotg->gadget.dev.driver = NULL;
 
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
 	dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
 
@@ -3024,10 +3026,40 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 	return s3c_hsotg_read_frameno(to_hsotg(gadget));
 }
 
+/**
+ * s3c_hsotg_pullup - connect/disconnect the USB PHY
+ * @gadget: The usb gadget state
+ * @is_on: Current state of the USB PHY
+ *
+ * Connect/Disconnect the USB PHY pullup
+ */
+static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct s3c_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
+
+	dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (is_on) {
+		s3c_hsotg_phy_enable(hsotg);
+		s3c_hsotg_core_init(hsotg);
+	} else {
+		s3c_hsotg_disconnect(hsotg);
+		s3c_hsotg_phy_disable(hsotg);
+	}
+
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
 static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
 	.get_frame	= s3c_hsotg_gadget_getframe,
 	.udc_start		= s3c_hsotg_udc_start,
 	.udc_stop		= s3c_hsotg_udc_stop,
+	.pullup                 = s3c_hsotg_pullup,
 };
 
 /**
@@ -3063,8 +3095,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 	INIT_LIST_HEAD(&hs_ep->queue);
 	INIT_LIST_HEAD(&hs_ep->ep.ep_list);
 
-	spin_lock_init(&hs_ep->lock);
-
 	/* add to the list of endpoints known by the gadget driver */
 	if (epnum)
 		list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
@@ -3342,7 +3372,7 @@ static int ep_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "request list (%p,%p):\n",
 		   ep->queue.next, ep->queue.prev);
 
-	spin_lock_irqsave(&ep->lock, flags);
+	spin_lock_irqsave(&hsotg->lock, flags);
 
 	list_for_each_entry(req, &ep->queue, queue) {
 		if (--show_limit < 0) {
@@ -3357,7 +3387,7 @@ static int ep_show(struct seq_file *seq, void *v)
 			   req->req.actual, req->req.status);
 	}
 
-	spin_unlock_irqrestore(&ep->lock, flags);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 
 	return 0;
 }
@@ -3477,7 +3507,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL);
+	hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
 	if (!hsotg) {
 		dev_err(dev, "cannot get memory\n");
 		return -ENOMEM;
@@ -3489,46 +3519,35 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	hsotg->clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
 		dev_err(dev, "cannot get otg clock\n");
-		ret = PTR_ERR(hsotg->clk);
-		goto err_mem;
+		return PTR_ERR(hsotg->clk);
 	}
 
 	platform_set_drvdata(pdev, hsotg);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "cannot find register resource 0\n");
-		ret = -EINVAL;
-		goto err_clk;
-	}
-
-	hsotg->regs_res = request_mem_region(res->start, resource_size(res),
-					     dev_name(dev));
-	if (!hsotg->regs_res) {
-		dev_err(dev, "cannot reserve registers\n");
-		ret = -ENOENT;
-		goto err_clk;
-	}
 
-	hsotg->regs = ioremap(res->start, resource_size(res));
+	hsotg->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!hsotg->regs) {
 		dev_err(dev, "cannot map registers\n");
 		ret = -ENXIO;
-		goto err_regs_res;
+		goto err_clk;
 	}
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		dev_err(dev, "cannot find IRQ\n");
-		goto err_regs;
+		goto err_clk;
 	}
 
+	spin_lock_init(&hsotg->lock);
+
 	hsotg->irq = ret;
 
-	ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg);
+	ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
+				dev_name(dev), hsotg);
 	if (ret < 0) {
 		dev_err(dev, "cannot claim IRQ\n");
-		goto err_regs;
+		goto err_clk;
 	}
 
 	dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq);
@@ -3558,7 +3577,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 				 hsotg->supplies);
 	if (ret) {
 		dev_err(dev, "failed to request supplies: %d\n", ret);
-		goto err_irq;
+		goto err_clk;
 	}
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
@@ -3642,19 +3661,11 @@ err_ep_mem:
 err_supplies:
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
-err_irq:
-	free_irq(hsotg->irq, hsotg);
-err_regs:
-	iounmap(hsotg->regs);
-
-err_regs_res:
-	release_resource(hsotg->regs_res);
-	kfree(hsotg->regs_res);
+
 err_clk:
 	clk_disable_unprepare(hsotg->clk);
 	clk_put(hsotg->clk);
-err_mem:
-	kfree(hsotg);
+
 	return ret;
 }
 
@@ -3675,12 +3686,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 		usb_gadget_unregister_driver(hsotg->driver);
 	}
 
-	free_irq(hsotg->irq, hsotg);
-	iounmap(hsotg->regs);
-
-	release_resource(hsotg->regs_res);
-	kfree(hsotg->regs_res);
-
 	s3c_hsotg_phy_disable(hsotg);
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 236b271871a..e26a4e7ed2b 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
@@ -1165,7 +1166,7 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
 	}
 
 	/* connect to bus through transceiver */
-	if (hsudc->transceiver) {
+	if (!IS_ERR_OR_NULL(hsudc->transceiver)) {
 		ret = otg_set_peripheral(hsudc->transceiver->otg,
 					&hsudc->gadget);
 		if (ret) {
@@ -1220,7 +1221,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget,
 	s3c_hsudc_stop_activity(hsudc);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
-	if (hsudc->transceiver)
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		(void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
 
 	disable_irq(hsudc->irq);
@@ -1249,7 +1250,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	if (!hsudc)
 		return -ENODEV;
 
-	if (hsudc->transceiver)
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		return usb_phy_set_power(hsudc->transceiver, mA);
 
 	return -EOPNOTSUPP;
@@ -1282,7 +1283,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
-	hsudc->transceiver = usb_get_transceiver();
+	hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
 	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
 		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
@@ -1385,8 +1386,8 @@ err_irq:
 err_remap:
 	release_mem_region(res->start, resource_size(res));
 err_res:
-	if (hsudc->transceiver)
-		usb_put_transceiver(hsudc->transceiver);
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		usb_put_phy(hsudc->transceiver);
 
 	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 8081ca3a70a..ae8b18869b8 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -38,12 +38,6 @@
  */
 
 /*
- * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included
- * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN
- * characters rather then a pointer to void.
- */
-
-/*
  * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
  * sets the number of pipeline buffers (length of the fsg_buffhd array).
  * The valid range of num_buffers is: num >= 2 && num <= 4.
@@ -260,11 +254,7 @@ enum fsg_buffer_state {
 };
 
 struct fsg_buffhd {
-#ifdef FSG_BUFFHD_STATIC_BUFFER
-	char				buf[FSG_BUFLEN];
-#else
 	void				*buf;
-#endif
 	enum fsg_buffer_state		state;
 	struct fsg_buffhd		*next;
 
@@ -627,6 +617,16 @@ static struct usb_gadget_strings	fsg_stringtab = {
  * the caller must own fsg->filesem for writing.
  */
 
+static void fsg_lun_close(struct fsg_lun *curlun)
+{
+	if (curlun->filp) {
+		LDBG(curlun, "close backing file\n");
+		fput(curlun->filp);
+		curlun->filp = NULL;
+	}
+}
+
+
 static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 {
 	int				ro;
@@ -636,6 +636,8 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 	loff_t				size;
 	loff_t				num_sectors;
 	loff_t				min_sectors;
+	unsigned int			blkbits;
+	unsigned int			blksize;
 
 	/* R/W if we can, R/O if we must */
 	ro = curlun->initially_ro;
@@ -680,17 +682,17 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 	}
 
 	if (curlun->cdrom) {
-		curlun->blksize = 2048;
-		curlun->blkbits = 11;
+		blksize = 2048;
+		blkbits = 11;
 	} else if (inode->i_bdev) {
-		curlun->blksize = bdev_logical_block_size(inode->i_bdev);
-		curlun->blkbits = blksize_bits(curlun->blksize);
+		blksize = bdev_logical_block_size(inode->i_bdev);
+		blkbits = blksize_bits(blksize);
 	} else {
-		curlun->blksize = 512;
-		curlun->blkbits = 9;
+		blksize = 512;
+		blkbits = 9;
 	}
 
-	num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
+	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
 	min_sectors = 1;
 	if (curlun->cdrom) {
 		min_sectors = 300;	/* Smallest track is 300 frames */
@@ -707,7 +709,12 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 		goto out;
 	}
 
+	if (fsg_lun_is_open(curlun))
+		fsg_lun_close(curlun);
+
 	get_file(filp);
+	curlun->blksize = blksize;
+	curlun->blkbits = blkbits;
 	curlun->ro = ro;
 	curlun->filp = filp;
 	curlun->file_length = size;
@@ -721,16 +728,6 @@ out:
 }
 
 
-static void fsg_lun_close(struct fsg_lun *curlun)
-{
-	if (curlun->filp) {
-		LDBG(curlun, "close backing file\n");
-		fput(curlun->filp);
-		curlun->filp = NULL;
-	}
-}
-
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -881,19 +878,17 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
 	if (count > 0 && buf[count-1] == '\n')
 		((char *) buf)[count-1] = 0;		/* Ugh! */
 
-	/* Eject current medium */
-	down_write(filesem);
-	if (fsg_lun_is_open(curlun)) {
-		fsg_lun_close(curlun);
-		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
-	}
-
 	/* Load new medium */
+	down_write(filesem);
 	if (count > 0 && buf[0]) {
+		/* fsg_lun_open() will close existing file if any. */
 		rc = fsg_lun_open(curlun, buf);
 		if (rc == 0)
 			curlun->unit_attention_data =
 					SS_NOT_READY_TO_READY_TRANSITION;
+	} else if (fsg_lun_is_open(curlun)) {
+		fsg_lun_close(curlun);
+		curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
 	}
 	up_write(filesem);
 	return (rc < 0 ? rc : count);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index b9e1925b2df..90e82e288eb 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -798,12 +798,6 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 
 	SET_ETHTOOL_OPS(net, &ops);
 
-	/* two kinds of host-initiated state changes:
-	 *  - iff DATA transfer is active, carrier is "on"
-	 *  - tx queueing enabled if open *and* carrier is "on"
-	 */
-	netif_carrier_off(net);
-
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
 	SET_NETDEV_DEVTYPE(net, &gadget_type);
@@ -817,6 +811,12 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
 		INFO(dev, "HOST MAC %pM\n", dev->host_mac);
 
 		the_dev = dev;
+
+		/* two kinds of host-initiated state changes:
+		 *  - iff DATA transfer is active, carrier is "on"
+		 *  - tx queueing enabled if open *and* carrier is "on"
+		 */
+		netif_carrier_off(net);
 	}
 
 	return status;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index ca4e03a1c73..93b0c119111 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -153,9 +153,11 @@ struct uvc_device
 
 	/* Descriptors */
 	struct {
-		const struct uvc_descriptor_header * const *control;
+		const struct uvc_descriptor_header * const *fs_control;
+		const struct uvc_descriptor_header * const *ss_control;
 		const struct uvc_descriptor_header * const *fs_streaming;
 		const struct uvc_descriptor_header * const *hs_streaming;
+		const struct uvc_descriptor_header * const *ss_streaming;
 	} desc;
 
 	unsigned int control_intf;
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 668fe128f2e..120e134e805 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -272,7 +272,15 @@ static const struct uvc_color_matching_descriptor uvc_color_matching = {
 	.bMatrixCoefficients	= 4,
 };
 
-static const struct uvc_descriptor_header * const uvc_control_cls[] = {
+static const struct uvc_descriptor_header * const uvc_fs_control_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_control_header,
+	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
+	(const struct uvc_descriptor_header *) &uvc_processing,
+	(const struct uvc_descriptor_header *) &uvc_output_terminal,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_ss_control_cls[] = {
 	(const struct uvc_descriptor_header *) &uvc_control_header,
 	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
 	(const struct uvc_descriptor_header *) &uvc_processing,
@@ -304,6 +312,18 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
 	NULL,
 };
 
+static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
 /* --------------------------------------------------------------------------
  * USB configuration
  */
@@ -311,8 +331,9 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
 static int __init
 webcam_config_bind(struct usb_configuration *c)
 {
-	return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
-			       uvc_hs_streaming_cls);
+	return uvc_bind_config(c, uvc_fs_control_cls, uvc_ss_control_cls,
+		uvc_fs_streaming_cls, uvc_hs_streaming_cls,
+		uvc_ss_streaming_cls);
 }
 
 static struct usb_configuration webcam_config_driver = {
@@ -373,7 +394,7 @@ static struct usb_composite_driver webcam_driver = {
 	.name		= "g_webcam",
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
-	.max_speed	= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_SUPER,
 	.unbind		= webcam_unbind,
 };