Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used.  The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
	drivers/base/regmap/regmap.c (overlap between the fix and stride code)

1 files changed, 16 insertions, 15 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48..38fe0762315 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 * remote wakeup, we must fail the suspend.
 	 */
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		port = HCS_N_PORTS(ehci->hcs_params);
-		while (port--) {
-			if (ehci->reset_done[port] != 0) {
-				spin_unlock_irq(&ehci->lock);
-				ehci_dbg(ehci, "suspend failed because "
-						"port %d is resuming\n",
-						port + 1);
-				return -EBUSY;
-			}
+		if (ehci->resuming_ports) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
 		}
 	}
 
@@ -554,16 +549,12 @@ static int
 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
-	u32		temp, status = 0;
+	u32		temp, status;
 	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
 	u32		ppcd = 0;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (ehci->rh_state != EHCI_RH_RUNNING)
-		return 0;
-
 	/* init status to no-changes */
 	buf [0] = 0;
 	ports = HCS_N_PORTS (ehci->hcs_params);
@@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		retval++;
 	}
 
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = ehci->resuming_ports;
+
 	/* Some boards (mostly VIA?) report bogus overcurrent indications,
 	 * causing massive log spam unless we completely ignore them.  It
 	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
@@ -846,6 +842,7 @@ static int ehci_hub_control (
 				ehci_writel(ehci,
 					temp & ~(PORT_RWC_BITS | PORT_RESUME),
 					status_reg);
+				clear_bit(wIndex, &ehci->resuming_ports);
 				retval = handshake(ehci, status_reg,
 					   PORT_RESUME, 0, 2000 /* 2msec */);
 				if (retval != 0) {
@@ -864,6 +861,7 @@ static int ehci_hub_control (
 					ehci->reset_done[wIndex])) {
 			status |= USB_PORT_STAT_C_RESET << 16;
 			ehci->reset_done [wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
 
 			/* force reset to complete */
 			ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
@@ -884,8 +882,10 @@ static int ehci_hub_control (
 					ehci_readl(ehci, status_reg));
 		}
 
-		if (!(temp & (PORT_RESUME|PORT_RESET)))
+		if (!(temp & (PORT_RESUME|PORT_RESET))) {
 			ehci->reset_done[wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
+		}
 
 		/* transfer dedicated ports to the companion hc */
 		if ((temp & PORT_CONNECT) &&
@@ -920,6 +920,7 @@ static int ehci_hub_control (
 			status |= USB_PORT_STAT_SUSPEND;
 		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
 			clear_bit(wIndex, &ehci->suspended_ports);
+			clear_bit(wIndex, &ehci->resuming_ports);
 			ehci->reset_done[wIndex] = 0;
 			if (temp & PORT_PE)
 				set_bit(wIndex, &ehci->port_c_suspend);