Merge tag 'usb-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.12 merge window

All patches here have been pending on linux-usb
and sitting in linux-next for a while now.

The biggest things in this tag are:

DWC3 learned proper usage of threaded IRQ
handlers and now we spend very little time
in hardirq context.

MUSB now has proper support for BeagleBone and
Beaglebone Black.

Tegra's USB support also got quite a bit of love
and is learning to use PHY layer and generic DT
attributes.

Other than that, the usual pack of cleanups and
non-critical fixes follow.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/gadget/udc-core.c
	drivers/usb/host/ehci-tegra.c
	drivers/usb/musb/omap2430.c
	drivers/usb/musb/tusb6010.c

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index d0d4cc151e7..f8b215fa0d9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -183,7 +183,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	spin_lock_irq(&ehci->lock);
 
 	/* clear phy low-power mode before changing wakeup flags */
-	if (ehci->has_hostpc) {
+	if (ehci->has_tdi_phy_lpm) {
 		port = HCS_N_PORTS(ehci->hcs_params);
 		while (port--) {
 			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
@@ -217,7 +217,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	}
 
 	/* enter phy low-power mode again */
-	if (ehci->has_hostpc) {
+	if (ehci->has_tdi_phy_lpm) {
 		port = HCS_N_PORTS(ehci->hcs_params);
 		while (port--) {
 			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
@@ -309,7 +309,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 		}
 	}
 
-	if (changed && ehci->has_hostpc) {
+	if (changed && ehci->has_tdi_phy_lpm) {
 		spin_unlock_irq(&ehci->lock);
 		msleep(5);	/* 5 ms for HCD to enter low-power mode */
 		spin_lock_irq(&ehci->lock);
@@ -436,7 +436,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		goto shutdown;
 
 	/* clear phy low-power mode before resume */
-	if (ehci->bus_suspended && ehci->has_hostpc) {
+	if (ehci->bus_suspended && ehci->has_tdi_phy_lpm) {
 		i = HCS_N_PORTS(ehci->hcs_params);
 		while (i--) {
 			if (test_bit(i, &ehci->bus_suspended)) {
@@ -925,7 +925,7 @@ static int ehci_hub_control (
 				goto error;
 
 			/* clear phy low-power mode before resume */
-			if (ehci->has_hostpc) {
+			if (ehci->has_tdi_phy_lpm) {
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
 						hostpc_reg);
@@ -1162,12 +1162,12 @@ static int ehci_hub_control (
 
 			/* After above check the port must be connected.
 			 * Set appropriate bit thus could put phy into low power
-			 * mode if we have hostpc feature
+			 * mode if we have tdi_phy_lpm feature
 			 */
 			temp &= ~PORT_WKCONN_E;
 			temp |= PORT_WKDISC_E | PORT_WKOC_E;
 			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
-			if (ehci->has_hostpc) {
+			if (ehci->has_tdi_phy_lpm) {
 				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
 				spin_lock_irqsave(&ehci->lock, flags);