Revert "usb: host: Faraday fotg210-hcd driver"

This reverts commit 1dd3d123239179fad5de5dc00a6e0014a1918fde.

The email address for the developer now bounces, which means they have
moved on, so remove the driver until someone else from the company steps
up to maintain it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 750 deletions

diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
deleted file mode 100644
index 8920f9d3256..00000000000
--- a/drivers/usb/host/fotg210.h
+++ /dev/null
@@ -1,750 +0,0 @@
-#ifndef __LINUX_FOTG210_H
-#define __LINUX_FOTG210_H
-
-/* definitions used for the EHCI driver */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
- * the host controller implementation.
- *
- * To facilitate the strongest possible byte-order checking from "sparse"
- * and so on, we use __leXX unless that's not practical.
- */
-#define __hc32	__le32
-#define __hc16	__le16
-
-/* statistics can be kept for tuning/monitoring */
-struct fotg210_stats {
-	/* irq usage */
-	unsigned long		normal;
-	unsigned long		error;
-	unsigned long		iaa;
-	unsigned long		lost_iaa;
-
-	/* termination of urbs from core */
-	unsigned long		complete;
-	unsigned long		unlink;
-};
-
-/* fotg210_hcd->lock guards shared data against other CPUs:
- *   fotg210_hcd:	async, unlink, periodic (and shadow), ...
- *   usb_host_endpoint: hcpriv
- *   fotg210_qh:	qh_next, qtd_list
- *   fotg210_qtd:	qtd_list
- *
- * Also, hold this lock when talking to HC registers or
- * when updating hw_* fields in shared qh/qtd/... structures.
- */
-
-#define	FOTG210_MAX_ROOT_PORTS	1		/* see HCS_N_PORTS */
-
-/*
- * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
- * controller may be doing DMA.  Lower values mean there's no DMA.
- */
-enum fotg210_rh_state {
-	FOTG210_RH_HALTED,
-	FOTG210_RH_SUSPENDED,
-	FOTG210_RH_RUNNING,
-	FOTG210_RH_STOPPING
-};
-
-/*
- * Timer events, ordered by increasing delay length.
- * Always update event_delays_ns[] and event_handlers[] (defined in
- * ehci-timer.c) in parallel with this list.
- */
-enum fotg210_hrtimer_event {
-	FOTG210_HRTIMER_POLL_ASS,	/* Poll for async schedule off */
-	FOTG210_HRTIMER_POLL_PSS,	/* Poll for periodic schedule off */
-	FOTG210_HRTIMER_POLL_DEAD,	/* Wait for dead controller to stop */
-	FOTG210_HRTIMER_UNLINK_INTR,	/* Wait for interrupt QH unlink */
-	FOTG210_HRTIMER_FREE_ITDS,	/* Wait for unused iTDs and siTDs */
-	FOTG210_HRTIMER_ASYNC_UNLINKS,	/* Unlink empty async QHs */
-	FOTG210_HRTIMER_IAA_WATCHDOG,	/* Handle lost IAA interrupts */
-	FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
-	FOTG210_HRTIMER_DISABLE_ASYNC,	/* Wait to disable async sched */
-	FOTG210_HRTIMER_IO_WATCHDOG,	/* Check for missing IRQs */
-	FOTG210_HRTIMER_NUM_EVENTS	/* Must come last */
-};
-#define FOTG210_HRTIMER_NO_EVENT	99
-
-struct fotg210_hcd {			/* one per controller */
-	/* timing support */
-	enum fotg210_hrtimer_event	next_hrtimer_event;
-	unsigned		enabled_hrtimer_events;
-	ktime_t			hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
-	struct hrtimer		hrtimer;
-
-	int			PSS_poll_count;
-	int			ASS_poll_count;
-	int			died_poll_count;
-
-	/* glue to PCI and HCD framework */
-	struct fotg210_caps __iomem *caps;
-	struct fotg210_regs __iomem *regs;
-	struct fotg210_dbg_port __iomem *debug;
-
-	__u32			hcs_params;	/* cached register copy */
-	spinlock_t		lock;
-	enum fotg210_rh_state	rh_state;
-
-	/* general schedule support */
-	bool			scanning:1;
-	bool			need_rescan:1;
-	bool			intr_unlinking:1;
-	bool			async_unlinking:1;
-	bool			shutdown:1;
-	struct fotg210_qh		*qh_scan_next;
-
-	/* async schedule support */
-	struct fotg210_qh		*async;
-	struct fotg210_qh		*dummy;		/* For AMD quirk use */
-	struct fotg210_qh		*async_unlink;
-	struct fotg210_qh		*async_unlink_last;
-	struct fotg210_qh		*async_iaa;
-	unsigned		async_unlink_cycle;
-	unsigned		async_count;	/* async activity count */
-
-	/* periodic schedule support */
-#define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
-	unsigned		periodic_size;
-	__hc32			*periodic;	/* hw periodic table */
-	dma_addr_t		periodic_dma;
-	struct list_head	intr_qh_list;
-	unsigned		i_thresh;	/* uframes HC might cache */
-
-	union fotg210_shadow	*pshadow;	/* mirror hw periodic table */
-	struct fotg210_qh		*intr_unlink;
-	struct fotg210_qh		*intr_unlink_last;
-	unsigned		intr_unlink_cycle;
-	unsigned		now_frame;	/* frame from HC hardware */
-	unsigned		next_frame;	/* scan periodic, start here */
-	unsigned		intr_count;	/* intr activity count */
-	unsigned		isoc_count;	/* isoc activity count */
-	unsigned		periodic_count;	/* periodic activity count */
-	/* max periodic time per uframe */
-	unsigned		uframe_periodic_max;
-
-
-	/* list of itds completed while now_frame was still active */
-	struct list_head	cached_itd_list;
-	struct fotg210_itd	*last_itd_to_free;
-
-	/* per root hub port */
-	unsigned long		reset_done[FOTG210_MAX_ROOT_PORTS];
-
-	/* bit vectors (one bit per port) */
-	unsigned long		bus_suspended;		/* which ports were
-			already suspended at the start of a bus suspend */
-	unsigned long		companion_ports;	/* which ports are
-			dedicated to the companion controller */
-	unsigned long		owned_ports;		/* which ports are
-			owned by the companion during a bus suspend */
-	unsigned long		port_c_suspend;		/* which ports have
-			the change-suspend feature turned on */
-	unsigned long		suspended_ports;	/* which ports are
-			suspended */
-	unsigned long		resuming_ports;		/* which ports have
-			started to resume */
-
-	/* per-HC memory pools (could be per-bus, but ...) */
-	struct dma_pool		*qh_pool;	/* qh per active urb */
-	struct dma_pool		*qtd_pool;	/* one or more per qh */
-	struct dma_pool		*itd_pool;	/* itd per iso urb */
-
-	unsigned		random_frame;
-	unsigned long		next_statechange;
-	ktime_t			last_periodic_enable;
-	u32			command;
-
-	/* SILICON QUIRKS */
-	unsigned		need_io_watchdog:1;
-	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
-
-	u8			sbrn;		/* packed release number */
-
-	/* irq statistics */
-#ifdef FOTG210_STATS
-	struct fotg210_stats	stats;
-#	define COUNT(x) ((x)++)
-#else
-#	define COUNT(x)
-#endif
-
-	/* debug files */
-#ifdef DEBUG
-	struct dentry		*debug_dir;
-#endif
-};
-
-/* convert between an HCD pointer and the corresponding FOTG210_HCD */
-static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
-{
-	return (struct fotg210_hcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
-{
-	return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct fotg210_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 * some hosts treat caplength and hciversion as parts of a 32-bit
-	 * register, others treat them as two separate registers, this
-	 * affects the memory map for big endian controllers.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(fotg210, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
-				(fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
-#define HC_VERSION(fotg210, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
-				(fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;	/* HCCPARAMS - offset 0x8 */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
-};
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct fotg210_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-
-/* EHCI 1.1 addendum */
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32	reserved1;
-	/* PORTSC: offset 0x20 */
-	u32	port_status;
-/* 31:23 reserved */
-#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC)
-	u32     reserved2[19];
-
-	/* OTGCSR: offet 0x70 */
-	u32     otgcsr;
-#define OTGCSR_HOST_SPD_TYP     (3 << 22)
-#define OTGCSR_A_BUS_DROP	(1 << 5)
-#define OTGCSR_A_BUS_REQ	(1 << 4)
-
-	/* OTGISR: offset 0x74 */
-	u32     otgisr;
-#define OTGISR_OVC	(1 << 10)
-
-	u32     reserved3[15];
-
-	/* GMIR: offset 0xB4 */
-	u32     gmir;
-#define GMIR_INT_POLARITY	(1 << 3) /*Active High*/
-#define GMIR_MHC_INT		(1 << 2)
-#define GMIR_MOTG_INT		(1 << 1)
-#define GMIR_MDEV_INT	(1 << 0)
-};
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct fotg210_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
-};
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-#include <linux/init.h>
-extern int __init early_dbgp_init(char *s);
-extern struct console early_dbgp_console;
-#endif /* CONFIG_EARLY_PRINTK_DBGP */
-
-struct usb_hcd;
-
-static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
-{
-	return 1; /* Shouldn't this be 0? */
-}
-
-static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return -1;
-}
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-/* Call backs from fotg210 host driver to fotg210 debug driver */
-extern int dbgp_external_startup(struct usb_hcd *);
-extern int dbgp_reset_prep(struct usb_hcd *hcd);
-#else
-static inline int dbgp_reset_prep(struct usb_hcd *hcd)
-{
-	return xen_dbgp_reset_prep(hcd);
-}
-static inline int dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return xen_dbgp_external_startup(hcd);
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#define	QTD_NEXT(fotg210, dma)	cpu_to_hc32(fotg210, (u32)dma)
-
-/*
- * EHCI Specification 0.95 Section 3.5
- * QTD: describe data transfer components (buffer, direction, ...)
- * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
- *
- * These are associated only with "QH" (Queue Head) structures,
- * used with control, bulk, and interrupt transfers.
- */
-struct fotg210_qtd {
-	/* first part defined by EHCI spec */
-	__hc32			hw_next;	/* see EHCI 3.5.1 */
-	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
-	__hc32			hw_token;	/* see EHCI 3.5.3 */
-#define	QTD_TOGGLE	(1 << 31)	/* data toggle */
-#define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
-#define	QTD_IOC		(1 << 15)	/* interrupt on complete */
-#define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
-#define	QTD_PID(tok)	(((tok)>>8) & 0x3)
-#define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
-#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
-#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
-#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
-#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
-#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
-#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
-#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
-
-#define ACTIVE_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
-#define HALT_BIT(fotg210)		cpu_to_hc32(fotg210, QTD_STS_HALT)
-#define STATUS_BIT(fotg210)	cpu_to_hc32(fotg210, QTD_STS_STS)
-
-	__hc32			hw_buf[5];	/* see EHCI 3.5.4 */
-	__hc32			hw_buf_hi[5];	/* Appendix B */
-
-	/* the rest is HCD-private */
-	dma_addr_t		qtd_dma;		/* qtd address */
-	struct list_head	qtd_list;		/* sw qtd list */
-	struct urb		*urb;			/* qtd's urb */
-	size_t			length;			/* length of buffer */
-} __aligned(32);
-
-/* mask NakCnt+T in qh->hw_alt_next */
-#define QTD_MASK(fotg210)	cpu_to_hc32(fotg210, ~0x1f)
-
-#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
-
-/*-------------------------------------------------------------------------*/
-
-/* type tag from {qh,itd,fstn}->hw_next */
-#define Q_NEXT_TYPE(fotg210, dma)	((dma) & cpu_to_hc32(fotg210, 3 << 1))
-
-/*
- * Now the following defines are not converted using the
- * cpu_to_le32() macro anymore, since we have to support
- * "dynamic" switching between be and le support, so that the driver
- * can be used on one system with SoC EHCI controller using big-endian
- * descriptors as well as a normal little-endian PCI EHCI controller.
- */
-/* values for that type tag */
-#define Q_TYPE_ITD	(0 << 1)
-#define Q_TYPE_QH	(1 << 1)
-#define Q_TYPE_SITD	(2 << 1)
-#define Q_TYPE_FSTN	(3 << 1)
-
-/* next async queue entry, or pointer to interrupt/periodic QH */
-#define QH_NEXT(fotg210, dma) \
-	(cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
-
-/* for periodic/async schedules and qtd lists, mark end of list */
-#define FOTG210_LIST_END(fotg210) \
-	cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
-
-/*
- * Entries in periodic shadow table are pointers to one of four kinds
- * of data structure.  That's dictated by the hardware; a type tag is
- * encoded in the low bits of the hardware's periodic schedule.  Use
- * Q_NEXT_TYPE to get the tag.
- *
- * For entries in the async schedule, the type tag always says "qh".
- */
-union fotg210_shadow {
-	struct fotg210_qh	*qh;		/* Q_TYPE_QH */
-	struct fotg210_itd	*itd;		/* Q_TYPE_ITD */
-	struct fotg210_fstn	*fstn;		/* Q_TYPE_FSTN */
-	__hc32			*hw_next;	/* (all types) */
-	void			*ptr;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.95 Section 3.6
- * QH: describes control/bulk/interrupt endpoints
- * See Fig 3-7 "Queue Head Structure Layout".
- *
- * These appear in both the async and (for interrupt) periodic schedules.
- */
-
-/* first part defined by EHCI spec */
-struct fotg210_qh_hw {
-	__hc32			hw_next;	/* see EHCI 3.6.1 */
-	__hc32			hw_info1;	/* see EHCI 3.6.2 */
-#define	QH_CONTROL_EP	(1 << 27)	/* FS/LS control endpoint */
-#define	QH_HEAD		(1 << 15)	/* Head of async reclamation list */
-#define	QH_TOGGLE_CTL	(1 << 14)	/* Data toggle control */
-#define	QH_HIGH_SPEED	(2 << 12)	/* Endpoint speed */
-#define	QH_LOW_SPEED	(1 << 12)
-#define	QH_FULL_SPEED	(0 << 12)
-#define	QH_INACTIVATE	(1 << 7)	/* Inactivate on next transaction */
-	__hc32			hw_info2;	/* see EHCI 3.6.2 */
-#define	QH_SMASK	0x000000ff
-#define	QH_CMASK	0x0000ff00
-#define	QH_HUBADDR	0x007f0000
-#define	QH_HUBPORT	0x3f800000
-#define	QH_MULT		0xc0000000
-	__hc32			hw_current;	/* qtd list - see EHCI 3.6.4 */
-
-	/* qtd overlay (hardware parts of a struct fotg210_qtd) */
-	__hc32			hw_qtd_next;
-	__hc32			hw_alt_next;
-	__hc32			hw_token;
-	__hc32			hw_buf[5];
-	__hc32			hw_buf_hi[5];
-} __aligned(32);
-
-struct fotg210_qh {
-	struct fotg210_qh_hw	*hw;		/* Must come first */
-	/* the rest is HCD-private */
-	dma_addr_t		qh_dma;		/* address of qh */
-	union fotg210_shadow	qh_next;	/* ptr to qh; or periodic */
-	struct list_head	qtd_list;	/* sw qtd list */
-	struct list_head	intr_node;	/* list of intr QHs */
-	struct fotg210_qtd	*dummy;
-	struct fotg210_qh	*unlink_next;	/* next on unlink list */
-
-	unsigned		unlink_cycle;
-
-	u8			needs_rescan;	/* Dequeue during giveback */
-	u8			qh_state;
-#define	QH_STATE_LINKED		1		/* HC sees this */
-#define	QH_STATE_UNLINK		2		/* HC may still see this */
-#define	QH_STATE_IDLE		3		/* HC doesn't see this */
-#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on unlink q */
-#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
-
-	u8			xacterrs;	/* XactErr retry counter */
-#define	QH_XACTERR_MAX		32		/* XactErr retry limit */
-
-	/* periodic schedule info */
-	u8			usecs;		/* intr bandwidth */
-	u8			gap_uf;		/* uframes split/csplit gap */
-	u8			c_usecs;	/* ... split completion bw */
-	u16			tt_usecs;	/* tt downstream bandwidth */
-	unsigned short		period;		/* polling interval */
-	unsigned short		start;		/* where polling starts */
-#define NO_FRAME ((unsigned short)~0)			/* pick new start */
-
-	struct usb_device	*dev;		/* access to TT */
-	unsigned		is_out:1;	/* bulk or intr OUT */
-	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* description of one iso transaction (up to 3 KB data if highspeed) */
-struct fotg210_iso_packet {
-	/* These will be copied to iTD when scheduling */
-	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
-	__hc32			transaction;	/* itd->hw_transaction[i] |= */
-	u8			cross;		/* buf crosses pages */
-	/* for full speed OUT splits */
-	u32			buf1;
-};
-
-/* temporary schedule data for packets from iso urbs (both speeds)
- * each packet is one logical usb transaction to the device (not TT),
- * beginning at stream->next_uframe
- */
-struct fotg210_iso_sched {
-	struct list_head	td_list;
-	unsigned		span;
-	struct fotg210_iso_packet	packet[0];
-};
-
-/*
- * fotg210_iso_stream - groups all (s)itds for this endpoint.
- * acts like a qh would, if EHCI had them for ISO.
- */
-struct fotg210_iso_stream {
-	/* first field matches fotg210_hq, but is NULL */
-	struct fotg210_qh_hw	*hw;
-
-	u8			bEndpointAddress;
-	u8			highspeed;
-	struct list_head	td_list;	/* queued itds */
-	struct list_head	free_list;	/* list of unused itds */
-	struct usb_device	*udev;
-	struct usb_host_endpoint *ep;
-
-	/* output of (re)scheduling */
-	int			next_uframe;
-	__hc32			splits;
-
-	/* the rest is derived from the endpoint descriptor,
-	 * trusting urb->interval == f(epdesc->bInterval) and
-	 * including the extra info for hw_bufp[0..2]
-	 */
-	u8			usecs, c_usecs;
-	u16			interval;
-	u16			tt_usecs;
-	u16			maxp;
-	u16			raw_mask;
-	unsigned		bandwidth;
-
-	/* This is used to initialize iTD's hw_bufp fields */
-	__hc32			buf0;
-	__hc32			buf1;
-	__hc32			buf2;
-
-	/* this is used to initialize sITD's tt info */
-	__hc32			address;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.95 Section 3.3
- * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
- *
- * Schedule records for high speed iso xfers
- */
-struct fotg210_itd {
-	/* first part defined by EHCI spec */
-	__hc32			hw_next;	/* see EHCI 3.3.1 */
-	__hc32			hw_transaction[8]; /* see EHCI 3.3.2 */
-#define FOTG210_ISOC_ACTIVE	(1<<31)	/* activate transfer this slot */
-#define FOTG210_ISOC_BUF_ERR	(1<<30)	/* Data buffer error */
-#define FOTG210_ISOC_BABBLE	(1<<29)	/* babble detected */
-#define FOTG210_ISOC_XACTERR	(1<<28)	/* XactErr - transaction error */
-#define	FOTG210_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
-#define	FOTG210_ITD_IOC		(1 << 15)	/* interrupt on complete */
-
-#define ITD_ACTIVE(fotg210)	cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
-
-	__hc32			hw_bufp[7];	/* see EHCI 3.3.3 */
-	__hc32			hw_bufp_hi[7];	/* Appendix B */
-
-	/* the rest is HCD-private */
-	dma_addr_t		itd_dma;	/* for this itd */
-	union fotg210_shadow	itd_next;	/* ptr to periodic q entry */
-
-	struct urb		*urb;
-	struct fotg210_iso_stream	*stream;	/* endpoint's queue */
-	struct list_head	itd_list;	/* list of stream's itds */
-
-	/* any/all hw_transactions here may be used by that urb */
-	unsigned		frame;		/* where scheduled */
-	unsigned		pg;
-	unsigned		index[8];	/* in urb->iso_frame_desc */
-} __aligned(32);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * EHCI Specification 0.96 Section 3.7
- * Periodic Frame Span Traversal Node (FSTN)
- *
- * Manages split interrupt transactions (using TT) that span frame boundaries
- * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
- * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
- * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
- */
-struct fotg210_fstn {
-	__hc32			hw_next;	/* any periodic q entry */
-	__hc32			hw_prev;	/* qh or FOTG210_LIST_END */
-
-	/* the rest is HCD-private */
-	dma_addr_t		fstn_dma;
-	union fotg210_shadow	fstn_next;	/* ptr to periodic q entry */
-} __aligned(32);
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare the PORTSC wakeup flags during controller suspend/resume */
-
-#define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
-		fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup);
-
-#define fotg210_prepare_ports_for_controller_resume(fotg210)		\
-		fotg210_adjust_port_wakeup_flags(fotg210, false, false);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Some EHCI controllers have a Transaction Translator built into the
- * root hub. This is a non-standard feature.  Each controller will need
- * to add code to the following inline functions, and call them as
- * needed (mostly in root hub code).
- */
-
-static inline unsigned int
-fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
-{
-	return (readl(&fotg210->regs->otgcsr)
-		& OTGCSR_HOST_SPD_TYP) >> 22;
-}
-
-/* Returns the speed of a device attached to a port on the root hub. */
-static inline unsigned int
-fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
-{
-	switch (fotg210_get_speed(fotg210, portsc)) {
-	case 0:
-		return 0;
-	case 1:
-		return USB_PORT_STAT_LOW_SPEED;
-	case 2:
-	default:
-		return USB_PORT_STAT_HIGH_SPEED;
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define	fotg210_has_fsl_portno_bug(e)		(0)
-
-/*
- * While most USB host controllers implement their registers in
- * little-endian format, a minority (celleb companion chip) implement
- * them in big endian format.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- */
-
-#define fotg210_big_endian_mmio(e)	0
-#define fotg210_big_endian_capbase(e)	0
-
-static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
-		__u32 __iomem *regs)
-{
-	return readl(regs);
-}
-
-static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
-		const unsigned int val, __u32 __iomem *regs)
-{
-	writel(val, regs);
-}
-
-/* cpu to fotg210 */
-static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
-{
-	return cpu_to_le32(x);
-}
-
-/* fotg210 to cpu */
-static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
-{
-	return le32_to_cpu(x);
-}
-
-static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
-			       const __hc32 *x)
-{
-	return le32_to_cpup(x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
-{
-	return fotg210_readl(fotg210, &fotg210->regs->frame_index);
-}
-
-#define fotg210_itdlen(urb, desc, t) ({			\
-	usb_pipein((urb)->pipe) ?				\
-	(desc)->length - FOTG210_ITD_LENGTH(t) :			\
-	FOTG210_ITD_LENGTH(t);					\
-})
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif	/* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#endif /* __LINUX_FOTG210_H */