[PATCH] USB: pxa27x OHCI - Separate platform code from main driver

To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.

This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 43 insertions, 42 deletions

diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 9d65ec30799..c165d1ebed5 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -26,18 +26,12 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
-
-
-#define PMM_NPS_MODE           1
-#define PMM_GLOBAL_MODE        2
-#define PMM_PERPORT_MODE       3
+#include <asm/arch/ohci.h>
 
 #define PXA_UHC_MAX_PORTNUM    3
 
 #define UHCRHPS(x)              __REG2( 0x4C000050, (x)<<2 )
 
-static int pxa27x_ohci_pmm_state;
-
 /*
   PMM_NPS_MODE -- PMM Non-power switching mode
       Ports are powered continuously.
@@ -50,8 +44,6 @@ static int pxa27x_ohci_pmm_state;
  */
 static int pxa27x_ohci_select_pmm( int mode )
 {
-	pxa27x_ohci_pmm_state = mode;
-
 	switch ( mode ) {
 	case PMM_NPS_MODE:
 		UHCRHDA |= RH_A_NPS;
@@ -71,7 +63,6 @@ static int pxa27x_ohci_select_pmm( int mode )
 			"Invalid mode %d, set to non-power switch mode.\n", 
 			mode );
 
-		pxa27x_ohci_pmm_state = PMM_NPS_MODE;
 		UHCRHDA |= RH_A_NPS;
 	}
 
@@ -82,8 +73,13 @@ extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
-static void pxa27x_start_hc(struct platform_device *dev)
+static int pxa27x_start_hc(struct device *dev)
 {
+	int retval = 0;
+	struct pxaohci_platform_data *inf;
+
+	inf = dev->platform_data;
+
 	pxa_set_cken(CKEN10_USBHOST, 1);
 
 	UHCHR |= UHCHR_FHR;
@@ -94,21 +90,11 @@ static void pxa27x_start_hc(struct platform_device *dev)
 	while (UHCHR & UHCHR_FSBIR)
 		cpu_relax();
 
-	/* This could be properly abstracted away through the
-	   device data the day more machines are supported and
-	   their differences can be figured out correctly. */
-	if (machine_is_mainstone()) {
-		/* setup Port1 GPIO pin. */
-		pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-		pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-		/* Set the Power Control Polarity Low and Power Sense
-		   Polarity Low to active low. Supply power to USB ports. */
-		UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-			~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+	if (inf->init)
+		retval = inf->init(dev);
 
-		pxa27x_ohci_pmm_state = PMM_PERPORT_MODE;
-	}
+	if (retval < 0)
+		return retval;
 
 	UHCHR &= ~UHCHR_SSE;
 
@@ -117,10 +103,19 @@ static void pxa27x_start_hc(struct platform_device *dev)
 	/* Clear any OTG Pin Hold */
 	if (PSSR & PSSR_OTGPH)
 		PSSR |= PSSR_OTGPH;
+
+	return 0;
 }
 
-static void pxa27x_stop_hc(struct platform_device *dev)
+static void pxa27x_stop_hc(struct device *dev)
 {
+	struct pxaohci_platform_data *inf;
+
+	inf = dev->platform_data;
+
+	if (inf->exit)
+		inf->exit(dev);
+
 	UHCHR |= UHCHR_FHR;
 	udelay(11);
 	UHCHR &= ~UHCHR_FHR;
@@ -147,22 +142,27 @@ static void pxa27x_stop_hc(struct platform_device *dev)
  * through the hotplug entry's driver_data.
  *
  */
-int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
-			  struct platform_device *dev)
+int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
 {
 	int retval;
 	struct usb_hcd *hcd;
+	struct pxaohci_platform_data *inf;
+
+	inf = pdev->dev.platform_data;
 
-	if (dev->resource[1].flags != IORESOURCE_IRQ) {
+	if (!inf)
+		return -ENODEV;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug ("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
 	}
 
-	hcd = usb_create_hcd (driver, &dev->dev, "pxa27x");
+	hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
 	if (!hcd)
 		return -ENOMEM;
-	hcd->rsrc_start = dev->resource[0].start;
-	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed");
@@ -177,18 +177,22 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
 		goto err2;
 	}
 
-	pxa27x_start_hc(dev);
+	if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
+		pr_debug("pxa27x_start_hc failed");
+		goto err3;
+	}
 
 	/* Select Power Management Mode */
-	pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state);
+	pxa27x_ohci_select_pmm(inf->port_mode);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
 	if (retval == 0)
 		return retval;
 
-	pxa27x_stop_hc(dev);
+	pxa27x_stop_hc(&pdev->dev);
+ err3:
 	iounmap(hcd->regs);
  err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -211,10 +215,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
  * context, normally "rmmod", "apmd", or something similar.
  *
  */
-void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev)
+void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
 	usb_remove_hcd(hcd);
-	pxa27x_stop_hc(dev);
+	pxa27x_stop_hc(&pdev->dev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
@@ -292,15 +296,12 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 
 static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev)
 {
-	int ret;
-
 	pr_debug ("In ohci_hcd_pxa27x_drv_probe");
 
 	if (usb_disabled())
 		return -ENODEV;
 
-	ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
-	return ret;
+	return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
 }
 
 static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)