Merge commit 'origin'

Manual fixup of conflicts on:

	arch/powerpc/include/asm/dcr-regs.h
	drivers/net/ibm_newemac/core.h

1 files changed, 205 insertions, 54 deletions

diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 7f0f35c7818..e294d430733 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -23,17 +23,90 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
 #include <mach/ohci.h>
 
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHCREV		(0x0000) /* UHC HCI Spec Revision */
+#define UHCHCON		(0x0004) /* UHC Host Control Register */
+#define UHCCOMS		(0x0008) /* UHC Command Status Register */
+#define UHCINTS		(0x000C) /* UHC Interrupt Status Register */
+#define UHCINTE		(0x0010) /* UHC Interrupt Enable */
+#define UHCINTD		(0x0014) /* UHC Interrupt Disable */
+#define UHCHCCA		(0x0018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		(0x001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		(0x0020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		(0x0024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		(0x0028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		(0x002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	(0x0030) /* UHC Done Head */
+#define UHCFMI		(0x0034) /* UHC Frame Interval */
+#define UHCFMR		(0x0038) /* UHC Frame Remaining */
+#define UHCFMN		(0x003C) /* UHC Frame Number */
+#define UHCPERS		(0x0040) /* UHC Periodic Start */
+#define UHCLS		(0x0044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA		(0x0048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+#define UHCRHDA_OCPM	(1 << 11)	/* Over Current Protection Mode */
+#define UHCRHDA_POTPGT(x) \
+			(((x) & 0xff) << 24) /* Power On To Power Good Time */
+
+#define UHCRHDB		(0x004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		(0x0050) /* UHC Root Hub Status */
+#define UHCRHPS1	(0x0054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	(0x0058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	(0x005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		(0x0060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           (0x0064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          (0x0068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          (0x006C) /* UHC Interrupt Test register */
+
 #define PXA_UHC_MAX_PORTNUM    3
 
-#define UHCRHPS(x)              __REG2( 0x4C000050, (x)<<2 )
+struct pxa27x_ohci {
+	/* must be 1st member here for hcd_to_ohci() to work */
+	struct ohci_hcd ohci;
+
+	struct device	*dev;
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+};
 
-static struct clk *usb_clk;
+#define to_pxa27x_ohci(hcd)	(struct pxa27x_ohci *)hcd_to_ohci(hcd)
 
 /*
   PMM_NPS_MODE -- PMM Non-power switching mode
@@ -45,30 +118,35 @@ static struct clk *usb_clk;
   PMM_PERPORT_MODE -- PMM per port switching mode
       Ports are powered individually.
  */
-static int pxa27x_ohci_select_pmm( int mode )
+static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode)
 {
-	switch ( mode ) {
+	uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+	uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB);
+
+	switch (mode) {
 	case PMM_NPS_MODE:
-		UHCRHDA |= RH_A_NPS;
+		uhcrhda |= RH_A_NPS;
 		break;
 	case PMM_GLOBAL_MODE:
-		UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
+		uhcrhda &= ~(RH_A_NPS & RH_A_PSM);
 		break;
 	case PMM_PERPORT_MODE:
-		UHCRHDA &= ~(RH_A_NPS);
-		UHCRHDA |= RH_A_PSM;
+		uhcrhda &= ~(RH_A_NPS);
+		uhcrhda |= RH_A_PSM;
 
 		/* Set port power control mask bits, only 3 ports. */
-		UHCRHDB |= (0x7<<17);
+		uhcrhdb |= (0x7<<17);
 		break;
 	default:
 		printk( KERN_ERR
 			"Invalid mode %d, set to non-power switch mode.\n",
 			mode );
 
-		UHCRHDA |= RH_A_NPS;
+		uhcrhda |= RH_A_NPS;
 	}
 
+	__raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+	__raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB);
 	return 0;
 }
 
@@ -76,57 +154,110 @@ extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
-static int pxa27x_start_hc(struct device *dev)
+static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
+				   struct pxaohci_platform_data *inf)
+{
+	uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+	uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+
+	if (inf->flags & ENABLE_PORT1)
+		uhchr &= ~UHCHR_SSEP1;
+
+	if (inf->flags & ENABLE_PORT2)
+		uhchr &= ~UHCHR_SSEP2;
+
+	if (inf->flags & ENABLE_PORT3)
+		uhchr &= ~UHCHR_SSEP3;
+
+	if (inf->flags & POWER_CONTROL_LOW)
+		uhchr |= UHCHR_PCPL;
+
+	if (inf->flags & POWER_SENSE_LOW)
+		uhchr |= UHCHR_PSPL;
+
+	if (inf->flags & NO_OC_PROTECTION)
+		uhcrhda |= UHCRHDA_NOCP;
+
+	if (inf->flags & OC_MODE_PERPORT)
+		uhcrhda |= UHCRHDA_OCPM;
+
+	if (inf->power_on_delay) {
+		uhcrhda &= ~UHCRHDA_POTPGT(0xff);
+		uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
+	}
+
+	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
+	__raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+}
+
+static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
+{
+	uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+
+	__raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR);
+	udelay(11);
+	__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
+}
+
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph()	do {} while (0)
+#endif
+
+static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
 {
 	int retval = 0;
 	struct pxaohci_platform_data *inf;
+	uint32_t uhchr;
 
 	inf = dev->platform_data;
 
-	clk_enable(usb_clk);
+	clk_enable(ohci->clk);
 
-	UHCHR |= UHCHR_FHR;
-	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	pxa27x_reset_hc(ohci);
+
+	uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
+	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
 
-	UHCHR |= UHCHR_FSBIR;
-	while (UHCHR & UHCHR_FSBIR)
+	while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
 		cpu_relax();
 
+	pxa27x_setup_hc(ohci, inf);
+
 	if (inf->init)
 		retval = inf->init(dev);
 
 	if (retval < 0)
 		return retval;
 
-	UHCHR &= ~UHCHR_SSE;
-
-	UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+	uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
+	__raw_writel(uhchr, ohci->mmio_base + UHCHR);
+	__raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
 
 	/* Clear any OTG Pin Hold */
-	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
-		PSSR |= PSSR_OTGPH;
-
+	pxa27x_clear_otgph();
 	return 0;
 }
 
-static void pxa27x_stop_hc(struct device *dev)
+static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
 {
 	struct pxaohci_platform_data *inf;
+	uint32_t uhccoms;
 
 	inf = dev->platform_data;
 
 	if (inf->exit)
 		inf->exit(dev);
 
-	UHCHR |= UHCHR_FHR;
-	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	pxa27x_reset_hc(ohci);
 
-	UHCCOMS |= 1;
+	/* Host Controller Reset */
+	uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01;
+	__raw_writel(uhccoms, ohci->mmio_base + UHCCOMS);
 	udelay(10);
 
-	clk_disable(usb_clk);
+	clk_disable(ohci->clk);
 }
 
 
@@ -147,18 +278,22 @@ static void pxa27x_stop_hc(struct device *dev)
  */
 int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
 {
-	int retval;
+	int retval, irq;
 	struct usb_hcd *hcd;
 	struct pxaohci_platform_data *inf;
+	struct pxa27x_ohci *ohci;
+	struct resource *r;
+	struct clk *usb_clk;
 
 	inf = pdev->dev.platform_data;
 
 	if (!inf)
 		return -ENODEV;
 
-	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug ("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		pr_err("no resource of IORESOURCE_IRQ");
+		return -ENXIO;
 	}
 
 	usb_clk = clk_get(&pdev->dev, "USBCLK");
@@ -168,8 +303,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 	hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
 	if (!hcd)
 		return -ENOMEM;
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		pr_err("no resource of IORESOURCE_MEM");
+		retval = -ENXIO;
+		goto err1;
+	}
+
+	hcd->rsrc_start = r->start;
+	hcd->rsrc_len = resource_size(r);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed");
@@ -184,24 +327,30 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 		goto err2;
 	}
 
-	if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
+	/* initialize "struct pxa27x_ohci" */
+	ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd);
+	ohci->dev = &pdev->dev;
+	ohci->clk = usb_clk;
+	ohci->mmio_base = (void __iomem *)hcd->regs;
+
+	if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) {
 		pr_debug("pxa27x_start_hc failed");
 		goto err3;
 	}
 
 	/* Select Power Management Mode */
-	pxa27x_ohci_select_pmm(inf->port_mode);
+	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
 
 	if (inf->power_budget)
 		hcd->power_budget = inf->power_budget;
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
 	if (retval == 0)
 		return retval;
 
-	pxa27x_stop_hc(&pdev->dev);
+	pxa27x_stop_hc(ohci, &pdev->dev);
  err3:
 	iounmap(hcd->regs);
  err2:
@@ -228,12 +377,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
  */
 void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 {
+	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+
 	usb_remove_hcd(hcd);
-	pxa27x_stop_hc(&pdev->dev);
+	pxa27x_stop_hc(ohci, &pdev->dev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	clk_put(usb_clk);
+	clk_put(ohci->clk);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -266,7 +417,7 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
 static const struct hc_driver ohci_pxa27x_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"PXA27x OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
+	.hcd_priv_size =	sizeof(struct pxa27x_ohci),
 
 	/*
 	 * generic hardware linkage
@@ -330,13 +481,13 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
 static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
 
-	if (time_before(jiffies, ohci->next_statechange))
+	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
-	ohci->next_statechange = jiffies;
+	ohci->ohci.next_statechange = jiffies;
 
-	pxa27x_stop_hc(&pdev->dev);
+	pxa27x_stop_hc(ohci, &pdev->dev);
 	hcd->state = HC_STATE_SUSPENDED;
 
 	return 0;
@@ -345,14 +496,14 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_
 static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
 	int status;
 
-	if (time_before(jiffies, ohci->next_statechange))
+	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
-	ohci->next_statechange = jiffies;
+	ohci->ohci.next_statechange = jiffies;
 
-	if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
+	if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
 		return status;
 
 	ohci_finish_controller_resume(hcd);