Merge tag 'mxs-fixes-3.9-4' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

From Shawn Guo <shawn.guo@linaro.org>:

The mxs fixes for 3.9, take 4:
 - A couple mxs boards that run I2C at 400 kHz experience some unstable
   issue occasionally.  Slow down the clock speed to have I2C work
   reliably.

* tag 'mxs-fixes-3.9-4' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: Slow down the I2C clock speed

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 8 insertions, 28 deletions

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 35616ffbe3a..6dc238c592b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1022,44 +1022,24 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
  * is attached to (or the roothub port its ancestor hub is attached to).  All we
  * know is the index of that port under either the USB 2.0 or the USB 3.0
  * roothub, but that doesn't give us the real index into the HW port status
- * registers.  Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed.  Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
  */
 static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 		struct usb_device *udev)
 {
 	struct usb_device *top_dev;
-	unsigned int num_similar_speed_ports;
-	unsigned int faked_port_num;
-	int i;
+	struct usb_hcd *hcd;
+
+	if (udev->speed == USB_SPEED_SUPER)
+		hcd = xhci->shared_hcd;
+	else
+		hcd = xhci->main_hcd;
 
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	faked_port_num = top_dev->portnum;
-	for (i = 0, num_similar_speed_ports = 0;
-			i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
-		u8 port_speed = xhci->port_array[i];
-
-		/*
-		 * Skip ports that don't have known speeds, or have duplicate
-		 * Extended Capabilities port speed entries.
-		 */
-		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
-			continue;
 
-		/*
-		 * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
-		 * 1.1 ports are under the USB 2.0 hub.  If the port speed
-		 * matches the device speed, it's a similar speed port.
-		 */
-		if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
-			num_similar_speed_ports++;
-		if (num_similar_speed_ports == faked_port_num)
-			/* Roothub ports are numbered from 1 to N */
-			return i+1;
-	}
-	return 0;
+	return	xhci_find_raw_port_number(hcd, top_dev->portnum);
 }
 
 /* Setup an xHCI virtual device for a Set Address command */