diff options
| author | Matt Evans <matt@ozlabs.org> | 2011-06-01 10:22:55 +1000 |
|---|---|---|
| committer | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2011-06-02 16:37:47 -0700 |
| commit | f5960b698eb50a39fce1a066dc19a6a5a1148e16 (patch) | |
| tree | d1f08656be5ffd40f4268d874801f91016508e3e /drivers/usb/host/xhci-mem.c | |
| parent | 55922c9d1b84b89cb946c777fddccb3247e7df2c (diff) | |
xhci: Remove some unnecessary casts and tidy some endian swap code
Some of the recently-added cpu_to_leXX and leXX_to_cpu made things somewhat
messy; this patch neatens some of these areas, removing unnecessary casts
in those parts also. In some places (where Y & Z are constants) a
comparison of (leXX_to_cpu(X) & Y) == Z has been replaced with
(X & cpu_to_leXX(Y)) == cpu_to_leXX(Z). The endian reversal of the
constants should wash out at compile time.
Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'drivers/usb/host/xhci-mem.c')
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 26caba4c195..596d8fbb9e1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -89,8 +89,8 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, return; prev->next = next; if (link_trbs) { - prev->trbs[TRBS_PER_SEGMENT-1].link. - segment_ptr = cpu_to_le64(next->dma); + prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = + cpu_to_le64(next->dma); /* Set the last TRB in the segment to have a TRB type ID of Link TRB */ val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control); @@ -187,8 +187,8 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, if (link_trbs) { /* See section 4.9.2.1 and 6.4.4.1 */ - prev->trbs[TRBS_PER_SEGMENT-1].link. - control |= cpu_to_le32(LINK_TOGGLE); + prev->trbs[TRBS_PER_SEGMENT-1].link.control |= + cpu_to_le32(LINK_TOGGLE); xhci_dbg(xhci, "Wrote link toggle flag to" " segment %p (virtual), 0x%llx (DMA)\n", prev, (unsigned long long)prev->dma); @@ -549,8 +549,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, addr = cur_ring->first_seg->dma | SCT_FOR_CTX(SCT_PRI_TR) | cur_ring->cycle_state; - stream_info->stream_ctx_array[cur_stream]. - stream_ring = cpu_to_le64(addr); + stream_info->stream_ctx_array[cur_stream].stream_ring = + cpu_to_le64(addr); xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, (unsigned long long) addr); @@ -786,7 +786,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n", slot_id, &xhci->dcbaa->dev_context_ptrs[slot_id], - (unsigned long long) le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id])); + le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id])); return 1; fail: @@ -890,19 +890,19 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); /* 3) Only the control endpoint is valid - one endpoint context */ - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | (u32) udev->route); + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { case USB_SPEED_SUPER: - slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_SS); + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS); break; case USB_SPEED_HIGH: - slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_HS); + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS); break; case USB_SPEED_FULL: - slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_FS); + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS); break; case USB_SPEED_LOW: - slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_LS); + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS); break; case USB_SPEED_WIRELESS: xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); @@ -916,7 +916,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud port_num = xhci_find_real_port_number(xhci, udev); if (!port_num) return -EINVAL; - slot_ctx->dev_info2 |= cpu_to_le32((u32) ROOT_HUB_PORT(port_num)); + slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num)); /* Set the port number in the virtual_device to the faked port number */ for (top_dev = udev; top_dev->parent && top_dev->parent->parent; top_dev = top_dev->parent) |