Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

1 files changed, 84 insertions, 9 deletions

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a9534396e85..a003e79aacd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -814,14 +814,64 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
 	ep0_ctx->deq |= ep_ring->cycle_state;
 }
 
+/*
+ * The xHCI roothub may have ports of differing speeds in any order in the port
+ * status registers.  xhci->port_array provides an array of the port speed for
+ * each offset into the port status registers.
+ *
+ * The xHCI hardware wants to know the roothub port number that the USB device
+ * is attached to (or the roothub port its ancestor hub is attached to).  All we
+ * know is the index of that port under either the USB 2.0 or the USB 3.0
+ * roothub, but that doesn't give us the real index into the HW port status
+ * registers.  Scan through the xHCI roothub port array, looking for the Nth
+ * entry of the correct port speed.  Return the port number of that entry.
+ */
+static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
+		struct usb_device *udev)
+{
+	struct usb_device *top_dev;
+	unsigned int num_similar_speed_ports;
+	unsigned int faked_port_num;
+	int i;
+
+	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+			top_dev = top_dev->parent)
+		/* Found device below root hub */;
+	faked_port_num = top_dev->portnum;
+	for (i = 0, num_similar_speed_ports = 0;
+			i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+		u8 port_speed = xhci->port_array[i];
+
+		/*
+		 * Skip ports that don't have known speeds, or have duplicate
+		 * Extended Capabilities port speed entries.
+		 */
+		if (port_speed == 0 || port_speed == -1)
+			continue;
+
+		/*
+		 * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
+		 * 1.1 ports are under the USB 2.0 hub.  If the port speed
+		 * matches the device speed, it's a similar speed port.
+		 */
+		if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
+			num_similar_speed_ports++;
+		if (num_similar_speed_ports == faked_port_num)
+			/* Roothub ports are numbered from 1 to N */
+			return i+1;
+	}
+	return 0;
+}
+
 /* Setup an xHCI virtual device for a Set Address command */
 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
 {
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
-	struct usb_device	*top_dev;
 	struct xhci_slot_ctx    *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
+	u32			port_num;
+	struct usb_device *top_dev;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -863,16 +913,20 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		BUG();
 	}
 	/* Find the root hub port this device is under */
+	port_num = xhci_find_real_port_number(xhci, udev);
+	if (!port_num)
+		return -EINVAL;
+	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num);
+	/* Set the port number in the virtual_device to the faked port number */
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
 	dev->port = top_dev->portnum;
-	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
+	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port);
 
-	/* Is this a LS/FS device under a HS hub? */
-	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
-			udev->tt) {
+	/* Is this a LS/FS device under an external HS hub? */
+	if (udev->tt && udev->tt->hub->parent) {
 		slot_ctx->tt_info = udev->tt->hub->slot_id;
 		slot_ctx->tt_info |= udev->ttport << 8;
 		if (udev->tt->multi)
@@ -1452,7 +1506,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
-	xhci->bus_suspended = 0;
+	xhci->bus_state[0].bus_suspended = 0;
+	xhci->bus_state[1].bus_suspended = 0;
 }
 
 static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
@@ -1748,6 +1803,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	}
 	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
 			xhci->num_usb2_ports, xhci->num_usb3_ports);
+
+	/* Place limits on the number of roothub ports so that the hub
+	 * descriptors aren't longer than the USB core will allocate.
+	 */
+	if (xhci->num_usb3_ports > 15) {
+		xhci_dbg(xhci, "Limiting USB 3.0 roothub ports to 15.\n");
+		xhci->num_usb3_ports = 15;
+	}
+	if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
+		xhci_dbg(xhci, "Limiting USB 2.0 roothub ports to %u.\n",
+				USB_MAXCHILDREN);
+		xhci->num_usb2_ports = USB_MAXCHILDREN;
+	}
+
 	/*
 	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
 	 * Not sure how the USB core will handle a hub with no ports...
@@ -1772,6 +1841,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 					"addr = %p\n", i,
 					xhci->usb2_ports[port_index]);
 			port_index++;
+			if (port_index == xhci->num_usb2_ports)
+				break;
 		}
 	}
 	if (xhci->num_usb3_ports) {
@@ -1790,6 +1861,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 						"addr = %p\n", i,
 						xhci->usb3_ports[port_index]);
 				port_index++;
+				if (port_index == xhci->num_usb3_ports)
+					break;
 			}
 	}
 	return 0;
@@ -1971,8 +2044,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	init_completion(&xhci->addr_dev);
 	for (i = 0; i < MAX_HC_SLOTS; ++i)
 		xhci->devs[i] = NULL;
-	for (i = 0; i < MAX_HC_PORTS; ++i)
-		xhci->resume_done[i] = 0;
+	for (i = 0; i < USB_MAXCHILDREN; ++i) {
+		xhci->bus_state[0].resume_done[i] = 0;
+		xhci->bus_state[1].resume_done[i] = 0;
+	}
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;