USB: ehci shutdown refactored

This patch refactors some shutdown code so it can be shared between
ehci_stop() and ehci_shutdown().

This also fixes a couple potential bugs:
 - ehci_shutdown() was not locking ehci->lock before halting the HC.
 - ehci_shutdown() didn't disable the watchdog and IAA timers.
 - ehci_stop() was resetting the host controller when it may have been
   running, which the EHCI spec says "may result in undefined behavior".

ehci_stop() was calling port_power() to turn off the ports, which waited
20ms after applying the port change.  The msleep was for the case where
the HC might take 20ms to turn the ports on; since we're shutting them
off, we can avoid the msleep and just use ehci_turn_off_ports().

ehci_stop() doesn't need to clear the intr_enable register or revert
ownership of the companion controllers to the BIOS, because the host
controller reset should have done that.  There might be a buggy host
controller that doesn't follow the reset rules, but for now we assume
it's redundant code and remove it.

[ A subsequent patch will cancel the timers later ... this version
carries forward existing bugs where timers could get re-armed
after they're canceled. ]

Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 25 insertions, 16 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a02dcff5eb2..369a8a5ea7b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -331,17 +331,13 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
 				&ehci->regs->port_status[port]);
 }
 
-/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
- * This forcibly disables dma and IRQs, helping kexec and other cases
- * where the next system software may expect clean state.
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Should be called with ehci->lock held.
  */
-static void
-ehci_shutdown (struct usb_hcd *hcd)
+static void ehci_silence_controller(struct ehci_hcd *ehci)
 {
-	struct ehci_hcd	*ehci;
-
-	ehci = hcd_to_ehci (hcd);
-	(void) ehci_halt (ehci);
+	ehci_halt(ehci);
 	ehci_turn_off_all_ports(ehci);
 
 	/* make BIOS/etc use companion controller during reboot */
@@ -351,6 +347,22 @@ ehci_shutdown (struct usb_hcd *hcd)
 	ehci_readl(ehci, &ehci->regs->configured_flag);
 }
 
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void ehci_shutdown(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+
+	del_timer_sync(&ehci->watchdog);
+	del_timer_sync(&ehci->iaa_watchdog);
+
+	spin_lock_irq(&ehci->lock);
+	ehci_silence_controller(ehci);
+	spin_unlock_irq(&ehci->lock);
+}
+
 static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
 {
 	unsigned port;
@@ -401,15 +413,15 @@ static void ehci_work (struct ehci_hcd *ehci)
 		timer_action (ehci, TIMER_IO_WATCHDOG);
 }
 
+/*
+ * Called when the ehci_hcd module is removed.
+ */
 static void ehci_stop (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 
 	ehci_dbg (ehci, "stop\n");
 
-	/* Turn off port power on all root hub ports. */
-	ehci_port_power (ehci, 0);
-
 	/* no more interrupts ... */
 	del_timer_sync (&ehci->watchdog);
 	del_timer_sync(&ehci->iaa_watchdog);
@@ -418,13 +430,10 @@ static void ehci_stop (struct usb_hcd *hcd)
 	if (HC_IS_RUNNING (hcd->state))
 		ehci_quiesce (ehci);
 
+	ehci_silence_controller(ehci);
 	ehci_reset (ehci);
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	spin_unlock_irq(&ehci->lock);
 
-	/* let companion controllers work when we aren't */
-	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-
 	remove_companion_file(ehci);
 	remove_debug_files (ehci);