Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

8 files changed, 209 insertions, 150 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f8..cc60759083b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
 	  adapter will *NOT* work with PC cards that do not contain an OHCI
 	  controller.
 
-	  For those PC cards that contain multiple OHCI controllers only ther
+	  For those PC cards that contain multiple OHCI controllers only the
 	  first one is used.
 
 	  The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9030994aba9..025d3331368 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -126,6 +126,11 @@ static unsigned park = 0;
 module_param (park, uint, S_IRUGO);
 MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
 
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd)
 
 	temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
 	ehci_info (ehci,
-		"USB %x.%x started, EHCI %x.%02x, driver %s\n",
+		"USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-		temp >> 8, temp & 0xff, DRIVER_VERSION);
+		temp >> 8, temp & 0xff, DRIVER_VERSION,
+		ignore_oc ? ", overcurrent ignored" : "");
 
 	writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
 
@@ -613,9 +619,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		unsigned	i = HCS_N_PORTS (ehci->hcs_params);
 
 		/* resume root hub? */
-		status = readl (&ehci->regs->command);
-		if (!(status & CMD_RUN))
-			writel (status | CMD_RUN, &ehci->regs->command);
+		if (!(readl(&ehci->regs->command) & CMD_RUN))
+			usb_hcd_resume_root_hub(hcd);
 
 		while (i--) {
 			int pstatus = readl (&ehci->regs->port_status [i]);
@@ -632,7 +637,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 			 */
 			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
-			usb_hcd_resume_root_hub(hcd);
 		}
 	}
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722c102..bfe5f307cba 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 	int			port;
+	int			mask;
 
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
@@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 		ehci->reclaim_ready = 1;
 	ehci_work(ehci);
 
-	/* suspend any active/unsuspended ports, maybe allow wakeup */
+	/* Unlike other USB host controller types, EHCI doesn't have
+	 * any notion of "global" or bus-wide suspend.  The driver has
+	 * to manually suspend all the active unsuspended ports, and
+	 * then manually resume them in the bus_resume() routine.
+	 */
+	ehci->bus_suspended = 0;
 	while (port--) {
 		u32 __iomem	*reg = &ehci->regs->port_status [port];
 		u32		t1 = readl (reg) & ~PORT_RWC_BITS;
 		u32		t2 = t1;
 
-		if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
+		/* keep track of which ports we suspend */
+		if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+				!(t1 & PORT_SUSPEND)) {
 			t2 |= PORT_SUSPEND;
+			set_bit(port, &ehci->bus_suspended);
+		}
+
+		/* enable remote wakeup on all ports */
 		if (device_may_wakeup(&hcd->self.root_hub->dev))
 			t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
 		else
@@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci_halt (ehci);
 	hcd->state = HC_STATE_SUSPENDED;
 
+	/* allow remote wakeup */
+	mask = INTR_MASK;
+	if (!device_may_wakeup(&hcd->self.root_hub->dev))
+		mask &= ~STS_PCD;
+	writel(mask, &ehci->regs->intr_enable);
+	readl(&ehci->regs->intr_enable);
+
 	ehci->next_statechange = jiffies + msecs_to_jiffies(10);
 	spin_unlock_irq (&ehci->lock);
 	return 0;
@@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 	u32			temp;
 	int			i;
-	int			intr_enable;
 
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
@@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	 * the last user of the controller, not reset/pm hardware keeping
 	 * state we gave to it.
 	 */
+	temp = readl(&ehci->regs->intr_enable);
+	ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
 
-	/* re-init operational registers in case we lost power */
-	if (readl (&ehci->regs->intr_enable) == 0) {
-		/* at least some APM implementations will try to deliver
-		 * IRQs right away, so delay them until we're ready.
-		 */
-		intr_enable = 1;
-		writel (0, &ehci->regs->segment);
-		writel (ehci->periodic_dma, &ehci->regs->frame_list);
-		writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
-	} else
-		intr_enable = 0;
-	ehci_dbg(ehci, "resume root hub%s\n",
-			intr_enable ? " after power loss" : "");
+	/* at least some APM implementations will try to deliver
+	 * IRQs right away, so delay them until we're ready.
+	 */
+	writel(0, &ehci->regs->intr_enable);
+
+	/* re-init operational registers */
+	writel(0, &ehci->regs->segment);
+	writel(ehci->periodic_dma, &ehci->regs->frame_list);
+	writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
 	writel (ehci->command, &ehci->regs->command);
 
-	/* take ports out of suspend */
+	/* manually resume the ports we suspended during bus_suspend() */
 	i = HCS_N_PORTS (ehci->hcs_params);
 	while (i--) {
 		temp = readl (&ehci->regs->port_status [i]);
 		temp &= ~(PORT_RWC_BITS
 			| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
-		if (temp & PORT_SUSPEND) {
+		if (test_bit(i, &ehci->bus_suspended) &&
+				(temp & PORT_SUSPEND)) {
 			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
 			temp |= PORT_RESUME;
 		}
@@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	mdelay (20);
 	while (i--) {
 		temp = readl (&ehci->regs->port_status [i]);
-		if ((temp & PORT_SUSPEND) == 0)
-			continue;
-		temp &= ~(PORT_RWC_BITS | PORT_RESUME);
-		writel (temp, &ehci->regs->port_status [i]);
-		ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+		if (test_bit(i, &ehci->bus_suspended) &&
+				(temp & PORT_SUSPEND)) {
+			temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+			writel (temp, &ehci->regs->port_status [i]);
+			ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+		}
 	}
 	(void) readl (&ehci->regs->command);
 
@@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	hcd->state = HC_STATE_RUNNING;
 
 	/* Now we can safely re-enable irqs */
-	if (intr_enable)
-		writel (INTR_MASK, &ehci->regs->intr_enable);
+	writel(INTR_MASK, &ehci->regs->intr_enable);
 
 	spin_unlock_irq (&ehci->lock);
 	return 0;
@@ -218,6 +235,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
 	u32		temp, status = 0;
+	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
 
@@ -233,6 +251,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		retval++;
 	}
 
+	/* Some boards (mostly VIA?) report bogus overcurrent indications,
+	 * causing massive log spam unless we completely ignore them.  It
+	 * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+	 * PORT_POWER; that's surprising, but maybe within-spec.
+	 */
+	if (!ignore_oc)
+		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	else
+		mask = PORT_CSC | PORT_PEC;
+	// PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
 	/* no hub change reports (bit 0) for now (power, ...) */
 
 	/* port N changes (bit N)? */
@@ -250,8 +280,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		}
 		if (!(temp & PORT_CONNECT))
 			ehci->reset_done [i] = 0;
-		if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
-				// PORT_STAT_C_SUSPEND?
+		if ((temp & mask) != 0
 				|| ((temp & PORT_RESUME) != 0
 					&& time_after (jiffies,
 						ehci->reset_done [i]))) {
@@ -319,6 +348,7 @@ static int ehci_hub_control (
 	u32		temp, status;
 	unsigned long	flags;
 	int		retval = 0;
+	unsigned	selector;
 
 	/*
 	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -417,7 +447,7 @@ static int ehci_hub_control (
 			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 		if (temp & PORT_PEC)
 			status |= 1 << USB_PORT_FEAT_C_ENABLE;
-		if (temp & PORT_OCC)
+		if ((temp & PORT_OCC) && !ignore_oc)
 			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 
 		/* whoever resumes must GetPortStatus to complete it!! */
@@ -506,6 +536,8 @@ static int ehci_hub_control (
 		}
 		break;
 	case SetPortFeature:
+		selector = wIndex >> 8;
+		wIndex &= 0xff;
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
@@ -559,6 +591,22 @@ static int ehci_hub_control (
 			}
 			writel (temp, &ehci->regs->port_status [wIndex]);
 			break;
+
+		/* For downstream facing ports (these):  one hub port is put
+		 * into test mode according to USB2 11.24.2.13, then the hub
+		 * must be reset (which for root hub now means rmmod+modprobe,
+		 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+		 * about the EHCI-specific stuff.
+		 */
+		case USB_PORT_FEAT_TEST:
+			if (!selector || selector > 5)
+				goto error;
+			ehci_quiesce(ehci);
+			ehci_halt(ehci);
+			temp |= selector << 16;
+			writel (temp, &ehci->regs->port_status [wIndex]);
+			break;
+
 		default:
 			goto error;
 		}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index e51c1ed81ac..4bc7970ba3e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -257,9 +257,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 static int ehci_pci_resume(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
-	unsigned		port;
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	int			retval = -EINVAL;
 
 	// maybe restore FLADJ
 
@@ -269,27 +267,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 	/* Mark hardware accessible again as we are out of D3 state by now */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	/* If CF is clear, we lost PCI Vaux power and need to restart.  */
-	if (readl(&ehci->regs->configured_flag) != FLAG_CF)
-		goto restart;
-
-	/* If any port is suspended (or owned by the companion),
-	 * we know we can/must resume the HC (and mustn't reset it).
-	 * We just defer that to the root hub code.
+	/* If CF is still set, we maintained PCI Vaux power.
+	 * Just undo the effect of ehci_pci_suspend().
 	 */
-	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
-		u32	status;
-		port--;
-		status = readl(&ehci->regs->port_status [port]);
-		if (!(status & PORT_POWER))
-			continue;
-		if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
-			usb_hcd_resume_root_hub(hcd);
-			return 0;
-		}
+	if (readl(&ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		if (!device_may_wakeup(&hcd->self.root_hub->dev))
+			mask &= ~STS_PCD;
+		writel(mask, &ehci->regs->intr_enable);
+		readl(&ehci->regs->intr_enable);
+		return 0;
 	}
 
-restart:
 	ehci_dbg(ehci, "lost power, restarting\n");
 	usb_root_hub_lost_power(hcd->self.root_hub);
 
@@ -307,13 +297,15 @@ restart:
 	ehci_work(ehci);
 	spin_unlock_irq(&ehci->lock);
 
-	/* restart; khubd will disconnect devices */
-	retval = ehci_run(hcd);
-
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	return retval;
+	writel(ehci->command, &ehci->regs->command);
+	writel(FLAG_CF, &ehci->regs->configured_flag);
+	readl(&ehci->regs->command);	/* unblock posted writes */
+
+	hcd->state = HC_STATE_SUSPENDED;
+	return 0;
 }
 #endif
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bbc3082a73d..74dbc6c8228 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -74,6 +74,7 @@ struct ehci_hcd {			/* one per controller */
 
 	/* per root hub port */
 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
+	unsigned long		bus_suspended;
 
 	/* per-HC memory pools (could be per-bus, but ...) */
 	struct dma_pool		*qh_pool;	/* qh per active urb */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ea4714e557e..a95275a401b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 		ohci->next_statechange = jiffies + STATECHANGE_DELAY;
 		ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
 				&regs->intrstatus);
+
+		/* NOTE: Vendors didn't always make the same implementation
+		 * choices for RHSC.  Many followed the spec; RHSC triggers
+		 * on an edge, like setting and maybe clearing a port status
+		 * change bit.  With others it's level-triggered, active
+		 * until khubd clears all the port status change bits.  We'll
+		 * always disable it here and rely on polling until khubd
+		 * re-enables it.
+		 */
+		ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
 		usb_hcd_poll_rh_status(hcd);
 	}
 
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 6995ea36f2e..2441642cb7b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -41,7 +41,11 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 
-	ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+	spin_lock_irq(&ohci->lock);
+	if (!ohci->autostop)
+		del_timer(&hcd->rh_timer);	/* Prevent next poll */
+	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+	spin_unlock_irq(&ohci->lock);
 }
 
 #define OHCI_SCHED_ENABLES \
@@ -50,6 +54,9 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 static void dl_done_list (struct ohci_hcd *);
 static void finish_unlinks (struct ohci_hcd *, u16);
 
+#ifdef	CONFIG_PM
+static int ohci_restart(struct ohci_hcd *ohci);
+
 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
 __releases(ohci->lock)
 __acquires(ohci->lock)
@@ -132,8 +139,6 @@ static inline struct ed *find_head (struct ed *ed)
 	return ed;
 }
 
-static int ohci_restart (struct ohci_hcd *ohci);
-
 /* caller has locked the root hub */
 static int ohci_rh_resume (struct ohci_hcd *ohci)
 __releases(ohci->lock)
@@ -169,7 +174,7 @@ __acquires(ohci->lock)
 		break;
 	case OHCI_USB_RESUME:
 		/* HCFS changes sometime after INTR_RD */
-		ohci_info(ohci, "%swakeup\n",
+		ohci_dbg(ohci, "%swakeup root hub\n",
 				autostopped ? "auto-" : "");
 		break;
 	case OHCI_USB_OPER:
@@ -181,7 +186,6 @@ __acquires(ohci->lock)
 		ohci_dbg (ohci, "lost power\n");
 		status = -EBUSY;
 	}
-#ifdef	CONFIG_PM
 	if (status == -EBUSY) {
 		if (!autostopped) {
 			spin_unlock_irq (&ohci->lock);
@@ -191,25 +195,12 @@ __acquires(ohci->lock)
 		}
 		return status;
 	}
-#endif
 	if (status != -EINPROGRESS)
 		return status;
 	if (autostopped)
 		goto skip_resume;
 	spin_unlock_irq (&ohci->lock);
 
-	temp = ohci->num_ports;
-	while (temp--) {
-		u32 stat = ohci_readl (ohci,
-				       &ohci->regs->roothub.portstatus [temp]);
-
-		/* force global, not selective, resume */
-		if (!(stat & RH_PS_PSS))
-			continue;
-		ohci_writel (ohci, RH_PS_POCI,
-				&ohci->regs->roothub.portstatus [temp]);
-	}
-
 	/* Some controllers (lucent erratum) need extra-long delays */
 	msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 
@@ -217,6 +208,7 @@ __acquires(ohci->lock)
 	temp &= OHCI_CTRL_HCFS;
 	if (temp != OHCI_USB_RESUME) {
 		ohci_err (ohci, "controller won't resume\n");
+		spin_lock_irq(&ohci->lock);
 		return -EBUSY;
 	}
 
@@ -296,8 +288,6 @@ skip_resume:
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-
 static int ohci_bus_suspend (struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
@@ -335,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
 	return rc;
 }
 
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+		int any_connected)
+{
+	int	poll_rh = 1;
+
+	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+
+	case OHCI_USB_OPER:
+		/* keep on polling until we know a device is connected
+		 * and RHSC is enabled */
+		if (!ohci->autostop) {
+			if (any_connected ||
+					!device_may_wakeup(&ohci_to_hcd(ohci)
+						->self.root_hub->dev)) {
+				if (ohci_readl(ohci, &ohci->regs->intrenable) &
+						OHCI_INTR_RHSC)
+					poll_rh = 0;
+			} else {
+				ohci->autostop = 1;
+				ohci->next_statechange = jiffies + HZ;
+			}
+
+		/* if no devices have been attached for one second, autostop */
+		} else {
+			if (changed || any_connected) {
+				ohci->autostop = 0;
+				ohci->next_statechange = jiffies +
+						STATECHANGE_DELAY;
+			} else if (time_after_eq(jiffies,
+						ohci->next_statechange)
+					&& !ohci->ed_rm_list
+					&& !(ohci->hc_control &
+						OHCI_SCHED_ENABLES)) {
+				ohci_rh_suspend(ohci, 1);
+			}
+		}
+		break;
+
+	/* if there is a port change, autostart or ask to be resumed */
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		if (changed) {
+			if (ohci->autostop)
+				ohci_rh_resume(ohci);
+			else
+				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+		} else {
+			/* everything is idle, no need for polling */
+			poll_rh = 0;
+		}
+		break;
+	}
+	return poll_rh;
+}
+
+#else	/* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+		int any_connected)
+{
+	int	poll_rh = 1;
+
+	/* keep on polling until RHSC is enabled */
+	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+		poll_rh = 0;
+	return poll_rh;
+}
+
 #endif	/* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -346,7 +413,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 	int		i, changed = 0, length = 1;
-	int		any_connected = 0, rhsc_enabled = 1;
+	int		any_connected = 0;
 	unsigned long	flags;
 
 	spin_lock_irqsave (&ohci->lock, flags);
@@ -387,67 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		}
 	}
 
-	/* NOTE:  vendors didn't always make the same implementation
-	 * choices for RHSC.  Sometimes it triggers on an edge (like
-	 * setting and maybe clearing a port status change bit); and
-	 * it's level-triggered on other silicon, active until khubd
-	 * clears all active port status change bits.  If it's still
-	 * set (level-triggered) we must disable it and rely on
-	 * polling until khubd re-enables it.
-	 */
-	if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) {
-		ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
-		(void) ohci_readl (ohci, &ohci->regs->intrdisable);
-		rhsc_enabled = 0;
-	}
-	hcd->poll_rh = 1;
-
-	/* carry out appropriate state changes */
-	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-
-	case OHCI_USB_OPER:
-		/* keep on polling until we know a device is connected
-		 * and RHSC is enabled */
-		if (!ohci->autostop) {
-			if (any_connected) {
-				if (rhsc_enabled)
-					hcd->poll_rh = 0;
-			} else {
-				ohci->autostop = 1;
-				ohci->next_statechange = jiffies + HZ;
-			}
-
-		/* if no devices have been attached for one second, autostop */
-		} else {
-			if (changed || any_connected) {
-				ohci->autostop = 0;
-				ohci->next_statechange = jiffies +
-						STATECHANGE_DELAY;
-			} else if (device_may_wakeup(&hcd->self.root_hub->dev)
-					&& time_after_eq(jiffies,
-						ohci->next_statechange)
-					&& !ohci->ed_rm_list
-					&& !(ohci->hc_control &
-						OHCI_SCHED_ENABLES)) {
-				ohci_rh_suspend (ohci, 1);
-			}
-		}
-		break;
-
-	/* if there is a port change, autostart or ask to be resumed */
-	case OHCI_USB_SUSPEND:
-	case OHCI_USB_RESUME:
-		if (changed) {
-			if (ohci->autostop)
-				ohci_rh_resume (ohci);
-			else
-				usb_hcd_resume_root_hub (hcd);
-		} else {
-			/* everything is idle, no need for polling */
-			hcd->poll_rh = 0;
-		}
-		break;
-	}
+	hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+			any_connected);
 
 done:
 	spin_unlock_irqrestore (&ohci->lock, flags);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 4f95a249c91..a9d7119e317 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -71,7 +71,7 @@ static int distrust_firmware = 1;
 module_param(distrust_firmware, bool, 0);
 MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
         "t setup");
-DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
 /*
 * u132_module_lock exists to protect access to global variables
 *
@@ -205,13 +205,9 @@ struct u132 {
         struct u132_port port[MAX_U132_PORTS];
         struct u132_endp *endp[MAX_U132_ENDPS];
 };
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data);
-int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 *data);
-int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 data);
+
 /*
-* these can not be inlines because we need the structure offset!!
+* these cannot be inlines because we need the structure offset!!
 * Does anyone have a better way?????
 */
 #define u132_read_pcimem(u132, member, data) \
@@ -3031,7 +3027,7 @@ static struct hc_driver u132_hc_driver = {
 * This function may be called by the USB core whilst the "usb_all_devices_rwsem"
 * is held for writing, thus this module must not call usb_remove_hcd()
 * synchronously - but instead should immediately stop activity to the
-* device and ansynchronously call usb_remove_hcd()
+* device and asynchronously call usb_remove_hcd()
 */
 static int __devexit u132_remove(struct platform_device *pdev)
 {
@@ -3227,7 +3223,7 @@ static int u132_resume(struct platform_device *pdev)
 #define u132_resume NULL
 #endif
 /*
-* this driver is loaded explicitely by ftdi_u132
+* this driver is loaded explicitly by ftdi_u132
 *
 * the platform_driver struct is static because it is per type of module
 */