Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block into for-3.18

This is to receive 0a30288da1ae ("blk-mq, percpu_ref: implement a
kludge for SCSI blk-mq stall during probe") which implements
__percpu_ref_kill_expedited() to work around SCSI blk-mq stall.  The
commit reverted and patches to implement proper fix will be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>

7 files changed, 71 insertions, 72 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 81cda09b47e..488a30836c3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -965,8 +965,6 @@ rescan:
 	}
 
 	qh->exception = 1;
-	if (ehci->rh_state < EHCI_RH_RUNNING)
-		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
 		WARN_ON(!list_empty(&qh->qtd_list));
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index cc305c71ac3..6130b757490 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1230,7 +1230,7 @@ int ehci_hub_control(
 			if (selector == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
 				spin_unlock_irqrestore(&ehci->lock, flags);
 				retval = ehset_single_step_set_feature(hcd,
-									wIndex);
+								wIndex + 1);
 				spin_lock_irqsave(&ehci->lock, flags);
 				break;
 			}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aa79e874904..69aece31143 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -468,7 +468,8 @@ static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
 }
 
 /* Updates Link Status for super Speed port */
-static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
 {
 	u32 pls = status_reg & PORT_PLS_MASK;
 
@@ -507,7 +508,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
 		 * in which sometimes the port enters compliance mode
 		 * caused by a delay on the host-device negotiation.
 		 */
-		if (pls == USB_SS_PORT_LS_COMP_MOD)
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
 			pls |= USB_PORT_STAT_CONNECTION;
 	}
 
@@ -666,7 +668,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	}
 	/* Update Port Link State */
 	if (hcd->speed == HCD_USB3) {
-		xhci_hub_report_usb3_link_state(&status, raw_port_status);
+		xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
 		/*
 		 * Verify if all USB3 Ports Have entered U0 already.
 		 * Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8056d90690e..8936211b161 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1812,6 +1812,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	if (xhci->lpm_command)
 		xhci_free_command(xhci, xhci->lpm_command);
+	xhci->lpm_command = NULL;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1819,7 +1820,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci_cleanup_command_queue(xhci);
 
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
-	for (i = 0; i < num_ports; i++) {
+	for (i = 0; i < num_ports && xhci->rh_bw; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
 		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
 			struct list_head *ep = &bwt->interval_bw[j].endpoints;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 687d3660815..c22a3e15a16 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -101,6 +101,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
@@ -151,6 +155,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_VIA)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 
+	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
+			pdev->device == 0x3432)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 60fb52ae864..abed30b8290 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -364,32 +364,6 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
 	}
 }
 
-/*
- * Find the segment that trb is in.  Start searching in start_seg.
- * If we must move past a segment that has a link TRB with a toggle cycle state
- * bit set, then we will toggle the value pointed at by cycle_state.
- */
-static struct xhci_segment *find_trb_seg(
-		struct xhci_segment *start_seg,
-		union xhci_trb	*trb, int *cycle_state)
-{
-	struct xhci_segment *cur_seg = start_seg;
-	struct xhci_generic_trb *generic_trb;
-
-	while (cur_seg->trbs > trb ||
-			&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
-		generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
-		if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE))
-			*cycle_state ^= 0x1;
-		cur_seg = cur_seg->next;
-		if (cur_seg == start_seg)
-			/* Looped over the entire list.  Oops! */
-			return NULL;
-	}
-	return cur_seg;
-}
-
-
 static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		unsigned int stream_id)
@@ -459,9 +433,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
 	struct xhci_virt_ep *ep = &dev->eps[ep_index];
 	struct xhci_ring *ep_ring;
-	struct xhci_generic_trb *trb;
+	struct xhci_segment *new_seg;
+	union xhci_trb *new_deq;
 	dma_addr_t addr;
 	u64 hw_dequeue;
+	bool cycle_found = false;
+	bool td_last_trb_found = false;
 
 	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
 			ep_index, stream_id);
@@ -486,45 +463,45 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		hw_dequeue = le64_to_cpu(ep_ctx->deq);
 	}
 
-	/* Find virtual address and segment of hardware dequeue pointer */
-	state->new_deq_seg = ep_ring->deq_seg;
-	state->new_deq_ptr = ep_ring->dequeue;
-	while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
-			!= (dma_addr_t)(hw_dequeue & ~0xf)) {
-		next_trb(xhci, ep_ring, &state->new_deq_seg,
-					&state->new_deq_ptr);
-		if (state->new_deq_ptr == ep_ring->dequeue) {
-			WARN_ON(1);
-			return;
-		}
-	}
+	new_seg = ep_ring->deq_seg;
+	new_deq = ep_ring->dequeue;
+	state->new_cycle_state = hw_dequeue & 0x1;
+
 	/*
-	 * Find cycle state for last_trb, starting at old cycle state of
-	 * hw_dequeue. If there is only one segment ring, find_trb_seg() will
-	 * return immediately and cannot toggle the cycle state if this search
-	 * wraps around, so add one more toggle manually in that case.
+	 * We want to find the pointer, segment and cycle state of the new trb
+	 * (the one after current TD's last_trb). We know the cycle state at
+	 * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
+	 * found.
 	 */
-	state->new_cycle_state = hw_dequeue & 0x1;
-	if (ep_ring->first_seg == ep_ring->first_seg->next &&
-			cur_td->last_trb < state->new_deq_ptr)
-		state->new_cycle_state ^= 0x1;
+	do {
+		if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
+		    == (dma_addr_t)(hw_dequeue & ~0xf)) {
+			cycle_found = true;
+			if (td_last_trb_found)
+				break;
+		}
+		if (new_deq == cur_td->last_trb)
+			td_last_trb_found = true;
 
-	state->new_deq_ptr = cur_td->last_trb;
-	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-			"Finding segment containing last TRB in TD.");
-	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
-			state->new_deq_ptr, &state->new_cycle_state);
-	if (!state->new_deq_seg) {
-		WARN_ON(1);
-		return;
-	}
+		if (cycle_found &&
+		    TRB_TYPE_LINK_LE32(new_deq->generic.field[3]) &&
+		    new_deq->generic.field[3] & cpu_to_le32(LINK_TOGGLE))
+			state->new_cycle_state ^= 0x1;
+
+		next_trb(xhci, ep_ring, &new_seg, &new_deq);
+
+		/* Search wrapped around, bail out */
+		if (new_deq == ep->ring->dequeue) {
+			xhci_err(xhci, "Error: Failed finding new dequeue state\n");
+			state->new_deq_seg = NULL;
+			state->new_deq_ptr = NULL;
+			return;
+		}
+
+	} while (!cycle_found || !td_last_trb_found);
 
-	/* Increment to find next TRB after last_trb. Cycle if appropriate. */
-	trb = &state->new_deq_ptr->generic;
-	if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
-	    (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
-		state->new_cycle_state ^= 0x1;
-	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+	state->new_deq_seg = new_seg;
+	state->new_deq_ptr = new_deq;
 
 	/* Don't update the ring cycle state for the producer (us). */
 	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -2487,7 +2464,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		 * last TRB of the previous TD. The command completion handle
 		 * will take care the rest.
 		 */
-		if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+		if (!event_seg && (trb_comp_code == COMP_STOP ||
+				   trb_comp_code == COMP_STOP_INVAL)) {
 			ret = 0;
 			goto cleanup;
 		}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b6f21175b87..c4a8fca8ae9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2880,6 +2880,9 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 			ep_index, ep->stopped_stream, ep->stopped_td,
 			&deq_state);
 
+	if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
+		return;
+
 	/* HW with the reset endpoint quirk will use the saved dequeue state to
 	 * issue a configure endpoint command later.
 	 */
@@ -3968,13 +3971,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	int ret;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return 0;
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
 	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
 	if (!ctrl_ctx) {