Merge commit 'v2.6.26-rc9' into x86/cpu

6 files changed, 46 insertions, 20 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1ef6df395e0..228797e54f9 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -300,8 +300,8 @@ config USB_R8A66597_HCD
 	  module will be called r8a66597-hcd.
 
 config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip USB like the R8A66597"
-	depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+	boolean "Enable SuperH on-chip R8A66597 USB"
+	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
 	help
-	   Renesas SuperH processor has USB like the R8A66597.
-	   This driver supported processor is SH7366.
+	   This driver enables support for the on-chip R8A66597 in the
+	   SH7366 and SH7723 processors.
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 35a03095757..90245fd8bac 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -177,6 +177,15 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
 static inline void
 timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 {
+	/* Don't override timeouts which shrink or (later) disable
+	 * the async ring; just the I/O watchdog.  Note that if a
+	 * SHRINK were pending, OFF would never be requested.
+	 */
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
+
 	if (!test_and_set_bit (action, &ehci->actions)) {
 		unsigned long t;
 
@@ -192,15 +201,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 			t = EHCI_SHRINK_JIFFIES;
 			break;
 		}
-		t += jiffies;
-		// all timings except IAA watchdog can be overridden.
-		// async queue SHRINK often precedes IAA.  while it's ready
-		// to go OFF neither can matter, and afterwards the IO
-		// watchdog stops unless there's still periodic traffic.
-		if (time_before_eq(t, ehci->watchdog.expires)
-				&& timer_pending (&ehci->watchdog))
-			return;
-		mod_timer (&ehci->watchdog, t);
+		mod_timer(&ehci->watchdog, t + jiffies);
 	}
 }
 
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c9cec873826..65aa5ecf569 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -2207,14 +2207,14 @@ struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
 		goto err_put;
 	}
 
-	ret = usb_add_hcd(hcd, irq, irqflags);
-	if (ret)
-		goto err_unmap;
-
 	hcd->irq = irq;
 	hcd->rsrc_start = res_start;
 	hcd->rsrc_len = res_len;
 
+	ret = usb_add_hcd(hcd, irq, irqflags);
+	if (ret)
+		goto err_unmap;
+
 	return hcd;
 
 err_unmap:
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 440bf94f0d4..c9db3fe9872 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@ static u32 nxp_pci_io_base;
 static u32 iolength;
 static u32 pci_mem_phy0;
 static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
 
 static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 		const struct pci_device_id *id)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 33f1c1c32ed..a8160d65f32 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1054,7 +1054,7 @@ MODULE_LICENSE ("GPL");
 
 #ifdef CONFIG_MFD_SM501
 #include "ohci-sm501.c"
-#define PLATFORM_DRIVER		ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
 #endif
 
 #if	!defined(PCI_DRIVER) &&		\
@@ -1062,6 +1062,7 @@ MODULE_LICENSE ("GPL");
 	!defined(OF_PLATFORM_DRIVER) &&	\
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
+	!defined(SM501_OHCI_DRIVER) && \
 	!defined(SSB_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
@@ -1121,9 +1122,18 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_ssb;
 #endif
 
+#ifdef SM501_OHCI_DRIVER
+	retval = platform_driver_register(&SM501_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_sm501;
+#endif
+
 	return retval;
 
 	/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
 #ifdef SSB_OHCI_DRIVER
  error_ssb:
 #endif
@@ -1159,6 +1169,9 @@ module_init(ohci_hcd_mod_init);
 
 static void __exit ohci_hcd_mod_exit(void)
 {
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
 #ifdef SSB_OHCI_DRIVER
 	ssb_driver_unregister(&SSB_OHCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 9c9f3b59186..9b547407c93 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -952,6 +952,7 @@ rescan_this:
 			struct urb	*urb;
 			urb_priv_t	*urb_priv;
 			__hc32		savebits;
+			u32		tdINFO;
 
 			td = list_entry (entry, struct td, td_list);
 			urb = td->urb;
@@ -966,6 +967,17 @@ rescan_this:
 			savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
 			*prev = td->hwNextTD | savebits;
 
+			/* If this was unlinked, the TD may not have been
+			 * retired ... so manually save the data toggle.
+			 * The controller ignores the value we save for
+			 * control and ISO endpoints.
+			 */
+			tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+			if ((tdINFO & TD_T) == TD_T_DATA0)
+				ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+			else if ((tdINFO & TD_T) == TD_T_DATA1)
+				ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
 			/* HC may have partly processed this TD */
 			td_done (ohci, urb, td);
 			urb_priv->td_cnt++;