summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/misc/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/usb/misc/Kconfig')
-rw-r--r--drivers/usb/misc/Kconfig152
1 files changed, 152 insertions, 0 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
new file mode 100644
index 00000000000..3a896954b3a
--- /dev/null
+++ b/drivers/usb/misc/Kconfig
@@ -0,0 +1,152 @@
+#
+# USB Miscellaneous driver configuration
+#
+comment "USB Miscellaneous drivers"
+ depends on USB
+
+config USB_EMI62
+ tristate "EMI 6|2m USB Audio interface support"
+ depends on USB
+ ---help---
+ This driver loads firmware to Emagic EMI 6|2m low latency USB
+ Audio and Midi interface.
+
+ After firmware load the device is handled with standard linux
+ USB Audio driver.
+
+ This code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called audio. If you want to compile it as a
+ module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config USB_EMI26
+ tristate "EMI 2|6 USB Audio interface support"
+ depends on USB
+ ---help---
+ This driver loads firmware to Emagic EMI 2|6 low latency USB
+ Audio interface.
+
+ After firmware load the device is handled with standard linux
+ USB Audio driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called emi26.
+
+config USB_AUERSWALD
+ tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ help
+ Say Y here if you want to connect an Auerswald USB ISDN Device
+ to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called auerswald.
+
+config USB_RIO500
+ tristate "USB Diamond Rio500 support (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ help
+ Say Y here if you want to connect a USB Rio500 mp3 player to your
+ computer's USB port. Please read <file:Documentation/usb/rio.txt>
+ for more information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rio500.
+
+config USB_LEGOTOWER
+ tristate "USB Lego Infrared Tower support (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ help
+ Say Y here if you want to connect a USB Lego Infrared Tower to your
+ computer's USB port.
+
+ This code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called legousbtower. If you want to compile it as
+ a module, say M here and read
+ <file:Documentation/kbuild/modules.txt>.
+
+config USB_LCD
+ tristate "USB LCD driver support"
+ depends on USB
+ help
+ Say Y here if you want to connect an USBLCD to your computer's
+ USB port. The USBLCD is a small USB interface board for
+ alphanumeric LCD modules. See <http://www.usblcd.de/> for more
+ information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usblcd.
+
+config USB_LED
+ tristate "USB LED driver support"
+ depends on USB
+ help
+ Say Y here if you want to connect an USBLED device to your
+ computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbled.
+
+config USB_CYTHERM
+ tristate "Cypress USB thermometer driver support"
+ depends on USB
+ help
+ Say Y here if you want to connect a Cypress USB thermometer
+ device to your computer's USB port. This device is also known
+ as the Cypress USB Starter kit or demo board. The Elektor
+ magazine published a modified version of this device in issue
+ #291.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cytherm.
+
+config USB_PHIDGETKIT
+ tristate "USB PhidgetKit support"
+ depends on USB
+ help
+ Say Y here if you want to connect a PhidgetKit USB device from
+ Phidgets Inc.
+
+ To compile this driver as a module, choose M here: the
+ module will be called phidgetkit.
+
+config USB_PHIDGETSERVO
+ tristate "USB PhidgetServo support"
+ depends on USB
+ help
+ Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
+ servo controller version 2.0 or 3.0.
+
+ Phidgets Inc. has a web page at <http://www.phidgets.com/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called phidgetservo.
+
+config USB_IDMOUSE
+ tristate "Siemens ID USB Mouse Fingerprint sensor support"
+ depends on USB
+ help
+ Say Y here if you want to use the fingerprint sensor on
+ the Siemens ID Mouse. There is also a Siemens ID Mouse
+ _Professional_, which has not been tested with this driver,
+ but uses the same sensor and may therefore work.
+
+ This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
+ which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
+
+ See also <http://www.fs.tum.de/~echtler/idmouse/>.
+
+source "drivers/usb/misc/sisusbvga/Kconfig"
+
+config USB_TEST
+ tristate "USB testing driver (DEVELOPMENT)"
+ depends on USB && USB_DEVICEFS && EXPERIMENTAL
+ help
+ This driver is for testing host controller software. It is used
+ with specialized device firmware for regression and stress testing,
+ to help prevent problems from cropping up with "real" drivers.
+
+ See <http://www.linux-usb.org/usbtest/> for more information,
+ including sample test device firmware and "how to use it".
+