diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
commit | d9a807461fc8cc0d6ba589ea0730d139122af012 (patch) | |
tree | 9d8c7a044659d821748dd40718a22557c04e4299 /drivers/usb/misc | |
parent | 3498d13b8090c0b0ef911409fbc503a7c4cca6ef (diff) | |
parent | 70c048a238c780c226eb4b115ebaa908cb3b34ec (diff) |
Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
Diffstat (limited to 'drivers/usb/misc')
-rw-r--r-- | drivers/usb/misc/Kconfig | 5 | ||||
-rw-r--r-- | drivers/usb/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/misc/ezusb.c | 160 | ||||
-rw-r--r-- | drivers/usb/misc/legousbtower.c | 3 | ||||
-rw-r--r-- | drivers/usb/misc/rio500.c | 2 |
5 files changed, 167 insertions, 4 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 1bfcd02ebeb..a8f05239350 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -244,3 +244,8 @@ config USB_YUREX To compile this driver as a module, choose M here: the module will be called yurex. +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 796ce7ebccc..3e99a643294 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_CYPRESS_CY7C63) += cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o +obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c new file mode 100644 index 00000000000..4223d761223 --- /dev/null +++ b/drivers/usb/misc/ezusb.c @@ -0,0 +1,160 @@ +/* + * EZ-USB specific functions used by some of the USB to Serial drivers. + * + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/ihex.h> + +struct ezusb_fx_type { + /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ + unsigned short cpucs_reg; + unsigned short max_internal_adress; +}; + +struct ezusb_fx_type ezusb_fx1 = { + .cpucs_reg = 0x7F92, + .max_internal_adress = 0x1B3F, +}; + +struct ezusb_fx_type ezusb_fx2 = { + .cpucs_reg = 0xE600, + .max_internal_adress = 0x3FFF, +}; + +/* Commands for writing to memory */ +#define WRITE_INT_RAM 0xA0 +#define WRITE_EXT_RAM 0xA3 + +int ezusb_writememory(struct usb_device *dev, int address, + unsigned char *data, int length, __u8 request) +{ + int result; + unsigned char *transfer_buffer; + + if (!dev) + return -ENODEV; + + transfer_buffer = kmemdup(data, length, GFP_KERNEL); + if (!transfer_buffer) { + dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, length); + return -ENOMEM; + } + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + address, 0, transfer_buffer, length, 3000); + + kfree(transfer_buffer); + return result; +} +EXPORT_SYMBOL_GPL(ezusb_writememory); + +int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, + unsigned char reset_bit) +{ + int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); + if (response < 0) + dev_err(&dev->dev, "%s-%d failed: %d\n", + __func__, reset_bit, response); + return response; +} + +int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); + +int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) +{ + return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); + +static int ezusb_ihex_firmware_download(struct usb_device *dev, + struct ezusb_fx_type fx, + const char *firmware_path) +{ + int ret = -ENOENT; + const struct firmware *firmware = NULL; + const struct ihex_binrec *record; + + if (request_ihex_firmware(&firmware, firmware_path, + &dev->dev)) { + dev_err(&dev->dev, + "%s - request \"%s\" failed\n", + __func__, firmware_path); + goto out; + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); + if (ret < 0) + goto out; + + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) > fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_EXT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing internal memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + + ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); + if (ret < 0) + goto out; + record = (const struct ihex_binrec *)firmware->data; + for (; record; record = ihex_next_binrec(record)) { + if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { + ret = ezusb_writememory(dev, be32_to_cpu(record->addr), + (unsigned char *)record->data, + be16_to_cpu(record->len), WRITE_INT_RAM); + if (ret < 0) { + dev_err(&dev->dev, "%s - ezusb_writememory " + "failed writing external memory " + "(%d %04X %p %d)\n", __func__, ret, + be32_to_cpu(record->addr), record->data, + be16_to_cpu(record->len)); + goto out; + } + } + } + ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); +out: + release_firmware(firmware); + return ret; +} + +int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); + +int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path) +{ + return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); +} +EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); + diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index a2702cbfe80..80894791c02 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -868,9 +868,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dbg(2, "%s: enter", __func__); - if (udev == NULL) - dev_info(&interface->dev, "udev is NULL.\n"); - /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 1084124c4a4..b9b356a9dd1 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -338,7 +338,7 @@ write_rio(struct file *file, const char __user *buffer, thistime -= partial; } else break; - }; + } if (result) { dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n", result); |