usb: musb: move clock handling to glue layer

musb core doesn't need to know about platform
specific details. So start moving clock
handling to platform glue layer and make
musb core agnostic about that.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 57 insertions, 34 deletions

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index e372c87f37e..e4e571bf9ba 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -85,6 +85,8 @@
 struct am35x_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
+	struct clk		*phy_clk;
+	struct clk		*clk;
 };
 
 static inline void phy_on(void)
@@ -402,34 +404,18 @@ static int am35x_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev, lvl_intr, sw_reset;
-	int status;
 
 	musb->mregs += USB_MENTOR_CORE_OFFSET;
 
-	clk_enable(musb->clock);
-	DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
-
-	musb->phy_clock = clk_get(musb->controller, "fck");
-	if (IS_ERR(musb->phy_clock)) {
-		status = PTR_ERR(musb->phy_clock);
-		goto exit0;
-	}
-	clk_enable(musb->phy_clock);
-	DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
-
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, USB_REVISION_REG);
-	if (!rev) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!rev)
+		return -ENODEV;
 
 	usb_nop_xceiv_register();
 	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!musb->xceiv)
+		return -ENODEV;
 
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -459,13 +445,8 @@ static int am35x_musb_init(struct musb *musb)
 	lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 	lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
 	omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+
 	return 0;
-exit1:
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-exit0:
-	clk_disable(musb->clock);
-	return status;
 }
 
 static int am35x_musb_exit(struct musb *musb)
@@ -478,11 +459,6 @@ static int am35x_musb_exit(struct musb *musb)
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
-	clk_disable(musb->clock);
-
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-
 	return 0;
 }
 
@@ -551,6 +527,9 @@ static int __init am35x_probe(struct platform_device *pdev)
 	struct platform_device		*musb;
 	struct am35x_glue		*glue;
 
+	struct clk			*phy_clk;
+	struct clk			*clk;
+
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
@@ -565,12 +544,40 @@ static int __init am35x_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	phy_clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(phy_clk)) {
+		dev_err(&pdev->dev, "failed to get PHY clock\n");
+		ret = PTR_ERR(phy_clk);
+		goto err2;
+	}
+
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err3;
+	}
+
+	ret = clk_enable(phy_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PHY clock\n");
+		goto err4;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err5;
+	}
+
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &am35x_dmamask;
 	musb->dev.coherent_dma_mask	= am35x_dmamask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
+	glue->phy_clk			= phy_clk;
+	glue->clk			= clk;
 
 	pdata->platform_ops		= &am35x_ops;
 
@@ -580,23 +587,35 @@ static int __init am35x_probe(struct platform_device *pdev)
 			pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err6;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err6;
 	}
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err6;
 	}
 
 	return 0;
 
+err6:
+	clk_disable(clk);
+
+err5:
+	clk_disable(phy_clk);
+
+err4:
+	clk_put(clk);
+
+err3:
+	clk_put(phy_clk);
+
 err2:
 	platform_device_put(musb);
 
@@ -613,6 +632,10 @@ static int __exit am35x_remove(struct platform_device *pdev)
 
 	platform_device_del(glue->musb);
 	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_disable(glue->phy_clk);
+	clk_put(glue->clk);
+	clk_put(glue->phy_clk);
 	kfree(glue);
 
 	return 0;