usb: musb: drop unneeded musb_debug trickery

We have a generic way of enabling/disabling
different debug messages on a driver called
DYNAMIC_PRINTK. Anyone interested in enabling
just part of the debug messages, please read
the documentation under:

Documentation/dynamic-debug-howto.txt

for information on how to use that great
infrastructure.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 47 insertions, 59 deletions

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 07b106c7de8..75aa01e0036 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -106,6 +106,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
  */
 static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
 {
+	struct musb	*musb = ep->musb;
 	void __iomem	*epio = ep->regs;
 	u16		csr;
 	u16		lastcsr = 0;
@@ -114,7 +115,7 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
 	csr = musb_readw(epio, MUSB_TXCSR);
 	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
 		if (csr != lastcsr)
-			DBG(3, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+			dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
 		lastcsr = csr;
 		csr |= MUSB_TXCSR_FLUSHFIFO;
 		musb_writew(epio, MUSB_TXCSR, csr);
@@ -240,7 +241,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 		len = urb->transfer_buffer_length - urb->actual_length;
 	}
 
-	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+	dev_dbg(musb->controller, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
 			qh, urb, address, qh->epnum,
 			is_in ? "in" : "out",
 			({char *s; switch (qh->type) {
@@ -263,7 +264,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
-		DBG(3, "check whether there's still time for periodic Tx\n");
+		dev_dbg(musb->controller, "check whether there's still time for periodic Tx\n");
 		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
@@ -278,7 +279,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 		} else {
 			qh->frame = urb->start_frame;
 			/* enable SOF interrupt so we can count down */
-			DBG(1, "SOF for %d\n", epnum);
+			dev_dbg(musb->controller, "SOF for %d\n", epnum);
 #if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
 			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
 #endif
@@ -286,7 +287,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 		break;
 	default:
 start:
-		DBG(4, "Start TX%d %s\n", epnum,
+		dev_dbg(musb->controller, "Start TX%d %s\n", epnum,
 			hw_ep->tx_channel ? "dma" : "pio");
 
 		if (!hw_ep->tx_channel)
@@ -301,21 +302,7 @@ static void musb_giveback(struct musb *musb, struct urb *urb, int status)
 __releases(musb->lock)
 __acquires(musb->lock)
 {
-	DBG(({ int level; switch (status) {
-				case 0:
-					level = 4;
-					break;
-				/* common/boring faults */
-				case -EREMOTEIO:
-				case -ESHUTDOWN:
-				case -ECONNRESET:
-				case -EPIPE:
-					level = 3;
-					break;
-				default:
-					level = 2;
-					break;
-				}; level; }),
+	dev_dbg(musb->controller,
 			"complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
 			urb, urb->complete, status,
 			usb_pipedevice(urb->pipe),
@@ -426,7 +413,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 	}
 
 	if (qh != NULL && qh->is_ready) {
-		DBG(4, "... next ep%d %cX urb %p\n",
+		dev_dbg(musb->controller, "... next ep%d %cX urb %p\n",
 		    hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
 		musb_start_urb(musb, is_in, qh);
 	}
@@ -471,7 +458,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
 
 	/* musb_ep_select(mbase, epnum); */
 	rx_count = musb_readw(epio, MUSB_RXCOUNT);
-	DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+	dev_dbg(musb->controller, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
 			urb->transfer_buffer, qh->offset,
 			urb->transfer_buffer_length);
 
@@ -493,7 +480,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
 				status = -EOVERFLOW;
 				urb->error_count++;
 			}
-			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
 			do_flush = 1;
 		} else
 			length = rx_count;
@@ -511,7 +498,7 @@ musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
 		if (rx_count > length) {
 			if (urb->status == -EINPROGRESS)
 				urb->status = -EOVERFLOW;
-			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", rx_count, length);
 			do_flush = 1;
 		} else
 			length = rx_count;
@@ -697,7 +684,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 	struct musb_qh		*qh = musb_ep_get_qh(hw_ep, !is_out);
 	u16			packet_sz = qh->maxpacket;
 
-	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+	dev_dbg(musb->controller, "%s hw%d urb %p spd%d dev%d ep%d%s "
 				"h_addr%02x h_port%02x bytes %d\n",
 			is_out ? "-->" : "<--",
 			epnum, urb, urb->dev->speed,
@@ -880,7 +867,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		}
 
 		csr |= MUSB_RXCSR_H_REQPKT;
-		DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+		dev_dbg(musb->controller, "RXCSR%d := %04x\n", epnum, csr);
 		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
 		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
 	}
@@ -923,15 +910,15 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 		request = (struct usb_ctrlrequest *) urb->setup_packet;
 
 		if (!request->wLength) {
-			DBG(4, "start no-DATA\n");
+			dev_dbg(musb->controller, "start no-DATA\n");
 			break;
 		} else if (request->bRequestType & USB_DIR_IN) {
-			DBG(4, "start IN-DATA\n");
+			dev_dbg(musb->controller, "start IN-DATA\n");
 			musb->ep0_stage = MUSB_EP0_IN;
 			more = true;
 			break;
 		} else {
-			DBG(4, "start OUT-DATA\n");
+			dev_dbg(musb->controller, "start OUT-DATA\n");
 			musb->ep0_stage = MUSB_EP0_OUT;
 			more = true;
 		}
@@ -943,7 +930,7 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
 		if (fifo_count) {
 			fifo_dest = (u8 *) (urb->transfer_buffer
 					+ urb->actual_length);
-			DBG(3, "Sending %d byte%s to ep0 fifo %p\n",
+			dev_dbg(musb->controller, "Sending %d byte%s to ep0 fifo %p\n",
 					fifo_count,
 					(fifo_count == 1) ? "" : "s",
 					fifo_dest);
@@ -988,7 +975,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 			? musb_readb(epio, MUSB_COUNT0)
 			: 0;
 
-	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+	dev_dbg(musb->controller, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
 		csr, qh, len, urb, musb->ep0_stage);
 
 	/* if we just did status stage, we are done */
@@ -999,15 +986,15 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 
 	/* prepare status */
 	if (csr & MUSB_CSR0_H_RXSTALL) {
-		DBG(6, "STALLING ENDPOINT\n");
+		dev_dbg(musb->controller, "STALLING ENDPOINT\n");
 		status = -EPIPE;
 
 	} else if (csr & MUSB_CSR0_H_ERROR) {
-		DBG(2, "no response, csr0 %04x\n", csr);
+		dev_dbg(musb->controller, "no response, csr0 %04x\n", csr);
 		status = -EPROTO;
 
 	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
-		DBG(2, "control NAK timeout\n");
+		dev_dbg(musb->controller, "control NAK timeout\n");
 
 		/* NOTE:  this code path would be a good place to PAUSE a
 		 * control transfer, if another one is queued, so that
@@ -1022,7 +1009,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 	}
 
 	if (status) {
-		DBG(6, "aborting\n");
+		dev_dbg(musb->controller, "aborting\n");
 		retval = IRQ_HANDLED;
 		if (urb)
 			urb->status = status;
@@ -1072,7 +1059,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 			/* flag status stage */
 			musb->ep0_stage = MUSB_EP0_STATUS;
 
-			DBG(5, "ep0 STATUS, csr %04x\n", csr);
+			dev_dbg(musb->controller, "ep0 STATUS, csr %04x\n", csr);
 
 		}
 		musb_writew(epio, MUSB_CSR0, csr);
@@ -1126,31 +1113,31 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 
 	/* with CPPI, DMA sometimes triggers "extra" irqs */
 	if (!urb) {
-		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
 		return;
 	}
 
 	pipe = urb->pipe;
 	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
-	DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+	dev_dbg(musb->controller, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
 			dma ? ", dma" : "");
 
 	/* check for errors */
 	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
 		/* dma was disabled, fifo flushed */
-		DBG(3, "TX end %d stall\n", epnum);
+		dev_dbg(musb->controller, "TX end %d stall\n", epnum);
 
 		/* stall; record URB status */
 		status = -EPIPE;
 
 	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
 		/* (NON-ISO) dma was disabled, fifo flushed */
-		DBG(3, "TX 3strikes on ep=%d\n", epnum);
+		dev_dbg(musb->controller, "TX 3strikes on ep=%d\n", epnum);
 
 		status = -ETIMEDOUT;
 
 	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
-		DBG(6, "TX end=%d device not responding\n", epnum);
+		dev_dbg(musb->controller, "TX end=%d device not responding\n", epnum);
 
 		/* NOTE:  this code path would be a good place to PAUSE a
 		 * transfer, if there's some other (nonperiodic) tx urb
@@ -1195,7 +1182,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 
 	/* second cppi case */
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		dev_dbg(musb->controller, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
 		return;
 	}
 
@@ -1254,7 +1241,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 		 * FIFO mode too...
 		 */
 		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
-			DBG(2, "DMA complete but packet still in FIFO, "
+			dev_dbg(musb->controller, "DMA complete but packet still in FIFO, "
 			    "CSR %04x\n", tx_csr);
 			return;
 		}
@@ -1321,7 +1308,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 			return;
 		}
 	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
-		DBG(1, "not complete, but DMA enabled?\n");
+		dev_dbg(musb->controller, "not complete, but DMA enabled?\n");
 		return;
 	}
 
@@ -1462,7 +1449,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 		 * usbtest #11 (unlinks) triggers it regularly, sometimes
 		 * with fifo full.  (Only with DMA??)
 		 */
-		DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+		dev_dbg(musb->controller, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
 			musb_readw(epio, MUSB_RXCOUNT));
 		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
 		return;
@@ -1470,20 +1457,20 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 	pipe = urb->pipe;
 
-	DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+	dev_dbg(musb->controller, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
 		epnum, rx_csr, urb->actual_length,
 		dma ? dma->actual_len : 0);
 
 	/* check for errors, concurrent stall & unlink is not really
 	 * handled yet! */
 	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
-		DBG(3, "RX end %d STALL\n", epnum);
+		dev_dbg(musb->controller, "RX end %d STALL\n", epnum);
 
 		/* stall; record URB status */
 		status = -EPIPE;
 
 	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
-		DBG(3, "end %d RX proto error\n", epnum);
+		dev_dbg(musb->controller, "end %d RX proto error\n", epnum);
 
 		status = -EPROTO;
 		musb_writeb(epio, MUSB_RXINTERVAL, 0);
@@ -1491,7 +1478,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
 
 		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
-			DBG(6, "RX end %d NAK timeout\n", epnum);
+			dev_dbg(musb->controller, "RX end %d NAK timeout\n", epnum);
 
 			/* NOTE: NAKing is *NOT* an error, so we want to
 			 * continue.  Except ... if there's a request for
@@ -1514,12 +1501,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 			goto finish;
 		} else {
-			DBG(4, "RX end %d ISO data error\n", epnum);
+			dev_dbg(musb->controller, "RX end %d ISO data error\n", epnum);
 			/* packet error reported later */
 			iso_err = true;
 		}
 	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
-		DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
+		dev_dbg(musb->controller, "end %d high bandwidth incomplete ISO packet RX\n",
 				epnum);
 		status = -EPROTO;
 	}
@@ -1565,7 +1552,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			done = true;
 		}
 
-		DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+		dev_dbg(musb->controller, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
 				xfer_len, dma ? ", dma" : "");
 		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
 
@@ -1615,7 +1602,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 				MUSB_RXCSR_H_WZC_BITS | val);
 		}
 
-		DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+		dev_dbg(musb->controller, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
 			done ? "off" : "reset",
 			musb_readw(epio, MUSB_RXCSR),
 			musb_readw(epio, MUSB_RXCOUNT));
@@ -1648,7 +1635,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 
 			rx_count = musb_readw(epio, MUSB_RXCOUNT);
 
-			DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+			dev_dbg(musb->controller, "RX%d count %d, buffer 0x%x len %d/%d\n",
 					epnum, rx_count,
 					urb->transfer_dma
 						+ urb->actual_length,
@@ -1672,7 +1659,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 						d_status = -EOVERFLOW;
 						urb->error_count++;
 					}
-					DBG(2, "** OVERFLOW %d into %d\n",\
+					dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",\
 					    rx_count, d->length);
 
 					length = d->length;
@@ -1760,7 +1747,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
 			done = musb_host_packet_rx(musb, urb,
 					epnum, iso_err);
-			DBG(6, "read %spacket\n", done ? "last " : "");
+			dev_dbg(musb->controller, "read %spacket\n", done ? "last " : "");
 		}
 	}
 
@@ -1881,7 +1868,7 @@ static int musb_schedule(
 	idle = 1;
 	qh->mux = 0;
 	hw_ep = musb->endpoints + best_end;
-	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+	dev_dbg(musb->controller, "qh %p periodic slot %d\n", qh, best_end);
 success:
 	if (head) {
 		idle = list_empty(head);
@@ -2087,6 +2074,7 @@ done:
 static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 {
 	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
 	void __iomem		*epio = ep->regs;
 	unsigned		hw_end = ep->epnum;
 	void __iomem		*regs = ep->musb->mregs;
@@ -2102,7 +2090,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 		dma = is_in ? ep->rx_channel : ep->tx_channel;
 		if (dma) {
 			status = ep->musb->dma_controller->channel_abort(dma);
-			DBG(status ? 1 : 3,
+			dev_dbg(musb->controller,
 				"abort %cX%d DMA for urb %p --> %d\n",
 				is_in ? 'R' : 'T', ep->epnum,
 				urb, status);
@@ -2149,7 +2137,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	int			is_in  = usb_pipein(urb->pipe);
 	int			ret;
 
-	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+	dev_dbg(musb->controller, "urb=%p, dev%d ep%d%s\n", urb,
 			usb_pipedevice(urb->pipe),
 			usb_pipeendpoint(urb->pipe),
 			is_in ? "in" : "out");